Thanks to Gilbar for putting this together!
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR DEVICE.
I've found I like running this with the JK6 modem the best since most of the mods out right now are for JK2. I uploaded some mirrors for everyone's convenience. Enjoy.
MIRRORS: http://www.multiupload.com/PZXBZO0NW9
gilbar said:
Here, try this. Works for me, might for you as well.
http://www.4shared.com/file/zpr_A5zq/Vibrant_JK2_Stock_Deodexed.html
Click to expand...
Click to collapse
Hawkularxda said:
Hello XDA Community!
I was wondering if someone would be so kinda as to upload a fully deodexed version of the newly leaked stock JK2. Thank you.
Click to expand...
Click to collapse
Sooo... I have a deodexed vesion that I made that I can post, just tested it on my phone, and it works, but I don't have an account on any site to upload the file to. If someone wants to PM me with information on somewhere to upload it, I can.
There is one on my site from a while ago.
I will make a new thread for it after I get back.
However, here it is for now.
If you like this ROM please visit our site: Devs4Android
MD5: 95538DD5561BB8853331BD34EDAAE85F
Password: "Devs4Android"
Master™ said:
There is one on my site from a while ago.
I will make a new thread for it after I get back.
However, here it is for now.
Click to expand...
Click to collapse
Hey Master, thanks! I tried this one earlier though and for some reason my phone just bootlooped the Vibrant screen. Not sure what happened, but that was after using Odin to go to Stock JFD.
Hawkularxda said:
Hey Master, thanks! I tried this one earlier though and for some reason my phone just bootlooped the Vibrant screen. Not sure what happened, but that was after using Odin to go to Stock JFD.
Click to expand...
Click to collapse
Yeah, so your post in my thread.
I tried it and it worked fine for me...
Any logcat?
Hawkularxda said:
Hey Master, thanks! I tried this one earlier though and for some reason my phone just bootlooped the Vibrant screen. Not sure what happened, but that was after using Odin to go to Stock JFD.
Click to expand...
Click to collapse
Here, try this. Works for me, might for you as well.
http://www.4shared.com/file/zpr_A5zq/Vibrant_JK2_Stock_Deodexed.html
gilbar said:
Here, try this. Works for me, might for you as well.
http://www.4shared.com/file/zpr_A5zq/Vibrant_JK2_Stock_Deodexed.html
Click to expand...
Click to collapse
downloading now, gonna give it a shot!! thanks!
gilbar said:
Here, try this. Works for me, might for you as well.
http://www.4shared.com/file/zpr_A5zq/Vibrant_JK2_Stock_Deodexed.html
Click to expand...
Click to collapse
This worked like a charm. Thank you. I was even able to apply s0niqu3's mod no problem.
Master™ said:
There is one on my site from a while ago.
I will make a new thread for it after I get back.
However, here it is for now.
If you like this ROM please visit our site: Devs4Android
MD5: 95538DD5561BB8853331BD34EDAAE85F
Password: "Devs4Android"
Click to expand...
Click to collapse
hehehe
thanks for this
Is this with 2e or 3e recovery? I'd like a stock JK2 deodex w/ untermensch's modified 3e recovery, but probably too much to hope for unless I do it myself.
Sent via XDA app on my Samsung Vibrant
•ROM:StockJI6»Rooted&Deodexed
•Kernel:ttabbal's»z4mod+bklght
•Mods:MobileAp/MultiLock/AccBat
Siks said:
Is this with 2e or 3e recovery? I'd like a stock JK2 deodex w/ untermensch's modified 3e recovery, but probably too much to hope for unless I do it myself.
Sent via XDA app on my Samsung Vibrant
•ROM:StockJI6»Rooted&Deodexed
•Kernel:ttabbal's»z4mod+bklght
•Mods:MobileAp/MultiLock/AccBat
Click to expand...
Click to collapse
It is with the 2e recovery, but the 3e from Untermensch is VERY easy to install. Just copy the "recovery" file into the /system/bin/ directory. If you use the version that disables checking, not the one with the key... it's slightly easier to install.
Brick!! help Odin not working.
Why do you want a deodexed rom? Deodexing slows it down. It takes less space but so what?
grennis said:
Why do you want a deodexed rom? Deodexing slows it down. It takes less space but so what?
Click to expand...
Click to collapse
you can theme it how you want and pretty much do what you want with it
Recovery is not working on this ROM, I flashed it because someone was supposed to buy the phone from me this weekend, and this morning when I tried to get it into recovery, it just sits there and hangs at the Vibrant screen both if I am trying to get into recovery and trying to boot it up normally.
When I get off work I am going to try the ODIN version to see if I can't at least get it back to stock and get a recovery working with the ROM today. I will let everyone know when I get it working.
Flash the Rom, and install the install busybox app from the market. Install busy box, reboot and then see if you can get into recovery.
It's weird, but the same issue was encountered in the aospish Rom thread and that fixed it.
"if you amplify everything, nothing is heard"
See I would do that if it didn't hang on the Vibrant screen even when I am booting up without trying to go into recovery, and I don't have my laptop handy to be able to just try to adb reboot
gothdroid said:
See I would do that if it didn't hang on the Vibrant screen even when I am booting up without trying to go into recovery, and I don't have my laptop handy to be able to just try to adb reboot
Click to expand...
Click to collapse
Which one did you flash? I flashed the one Master provided and it hung at the Vibrant screen... the one Gilbar uploaded worked out just fine.
Whitehawkx said:
Which one did you flash? I flashed the one Master provided and it hung at the Vibrant screen... the one Gilbar uploaded worked out just fine.
Click to expand...
Click to collapse
Flashed the one from the first post, and it booted up fine the first couple times, then I tried to boot into recovery via quick boot, and that is when everything went to hell
All of these stock ROMs are getting stuck on the Vibrant screen when dealing with recovery. Does this happen if you use the updated 3e recovery?
Related
can anybody help me i want to root my phone but im using the new beta build of froyo the button combos are not working.
im using samsung captivate
ademejia said:
can anybody help me i want to root my phone but im using the new beta build of froyo the button combos are not working
Click to expand...
Click to collapse
You have to flash a stock captivate kernel, use the key combo, run the update package, then flash back to the JPH kernel again
Zilch25 said:
You have to flash a stock captivate kernel, use the key combo, run the update package, then flash back to the JPH kernel again
Click to expand...
Click to collapse
won't that not work since it's a 2.2 build and we have no available kernels?
did Zilch finally make a mistake? AND I CAUGHT IT!?!?
okay i will try it
I was always under the assumption that with a 2.2 ROM, a 2.1 kernel won't boot (even to recovery, though I assume since it can get to download it can get to recovery now that I think about it) as long as you flash the JPH kernel back immediately after before you boot?
maybe I didn't catch Zilch making a mistake =(
Kaik541 said:
won't that not work since it's a 2.2 build and we have no available kernels?
did Zilch finally make a mistake? AND I CAUGHT IT!?!?
Click to expand...
Click to collapse
Nope, I'm right =P
You have to use it to get the recovery so that you can use our key combos (and power as select), install the package, then flash back. The phone won't BOOT without the JPH kernel but it will get to recovery =P
Ps. NEENER
Zilch25 said:
Nope, I'm right =P
You have to use it to get the recovery so that you can use our key combos (and power as select), install the package, then flash back. The phone won't BOOT without the JPH kernel but it will get to recovery =P
Ps. NEENER
Click to expand...
Click to collapse
one of these days, you'll be drunk or tired and I'll catch you, and then I'll steal your throne!
MWAHAHAAH!
err... *ahem* so yes, booting into recovery to root is possible. just flash back
Kaik541 said:
one of these days, you'll be drunk or tired and I'll catch you, and then I'll steal your throne!
MWAHAHAAH!
err... *ahem* so yes, booting into recovery to root is possible. just flash back
Click to expand...
Click to collapse
I dunno, most likely if I'm drunk I won't be posting on XDA
ummm where can i get a jph kernel. is that the 802 pit file ?
Zilch25 said:
I dunno, most likely if I'm drunk I won't be posting on XDA
Click to expand...
Click to collapse
haha everyone has lonely nights! let me have my dreams
ademejia said:
ummm where can i get a jph kernel. is that the 802 pit file ?
Click to expand...
Click to collapse
the JPH kernel will be inside the flashable package. look for a file named zimage.tar
was meant to imply the kernel was in there, didn't think he wouldn't know what to do with it... zZzzzZzzzzZZZZzz
Kaik541 said:
the JPH kernel will be inside the flashable package. look for a file named zimage.tar
Click to expand...
Click to collapse
No no no, if he does that the zImage file won't be flashable, unless he's on a linux box and can repackage it.
Go to the I9000 forums and find one of the threads about rooting JPH, they have a handy zip that contains the JPH kernel and the update.zip for rooting
Zilch25 said:
No no no, if he does that the zImage file won't be flashable, unless he's on a linux box and can repackage it.
Go to the I9000 forums and find one of the threads about rooting JPH, they have a handy zip that contains the JPH kernel and the update.zip for rooting
Click to expand...
Click to collapse
SHOWS WHAT I KNOW. now you're catching me giving bad advice. today is not my day. I'm gonna go sit and watch Jersey Shore and feel better about myself.
Kaik541 said:
SHOWS WHAT I KNOW. now you're catching me giving bad advice. today is not my day. I'm gonna go sit and watch Jersey Shore and feel better about myself.
Click to expand...
Click to collapse
MUAHAHAHA My how the tables have turned!
when i made my selection of updating the zip then i press power button nothing happens leaves me stuck.
i did the captivate kernel then then i did the recovery to root and applied it. then i flash back the i9000 jhp kernel it wont make my selection to reboot and go in to the os.
ademejia said:
when i made my selection of updating the zip then i press power button nothing happens leaves me stuck.
i did the captivate kernel then then i did the recovery to root and applied it. then i flash back the i9000 jhp kernel it wont make my selection to reboot and go in to the os.
Click to expand...
Click to collapse
I'm curious why it's going back into recovery again- just hook your phone up to your computer and go into your adb folder and type: adb reboot
ademejia said:
ummm where can i get a jph kernel. is that the 802 pit file ?
Click to expand...
Click to collapse
stock kernel is the 2.6.29 [email protected] #2 right?
androidftwin said:
stock kernel is the 2.6.29 [email protected] #2 right?
Click to expand...
Click to collapse
Yup, thats stock captivate
I curious as to why people lately have been trying the i9000 jph? Yes, I would want 2.2 also but that thing is not made for these phones and with all the people lately having trouble, why bother? Just flash back to stock, use adb if buttons don't work, and load Eugene's captivate hybrid. It's fast, doesn't have the att/samsung bloat, and it works without bricking our phones.
bobbylx said:
I curious as to why people lately have been trying the i9000 jph? Yes, I would 2.2 also but that that thing is not made for these phones and with all the people lately having trouble, why bother? Just flash back to stock, use adb if buttons don't work, and load Eugene's captivate hybrid. It's fast, doesn't have the att/samsung bloat, and it works without bricking our phones.
Click to expand...
Click to collapse
Eh JPH works fine on the Captivate (even external SD shockingly enough)- it's just not that great of an upgrade period though =P
I made a ROM from XWJS3 on samfirmware.com. I put everything on it and triple checked everything. Everytime I try to flash it, when booting it just stays at the galaxy S animation and vibrates 3 times over and over.
Anyone know what causes that?
ryude said:
I made a ROM from XWJS3 on samfirmware.com. I put everything on it and triple checked everything. Everytime I try to flash it, when booting it just stays at the galaxy S animation and vibrates 3 times over and over.
Anyone know what causes that?
Click to expand...
Click to collapse
lol....had this same problem with a new rom i am playing with. what kernel are you trying to use with it?
Pirateghost said:
lol....had this same problem with a new rom i am playing with. what kernel are you trying to use with it?
Click to expand...
Click to collapse
Suckerpunch #32 100HZ. Do you think it's kernel related?
ryude said:
Suckerpunch #32 100HZ. Do you think it's kernel related?
Click to expand...
Click to collapse
mine was. i was trying to use a 2.2 kernel on 2.2.1 rom....it never booted. got to the point where it was trying to populate the databases and it vibrated over and over....
Pirateghost said:
mine was. i was trying to use a 2.2 kernel on 2.2.1 rom....it never booted. got to the point where it was trying to populate the databases and it vibrated over and over....
Click to expand...
Click to collapse
Thanks I'll try putting speedmod in there instead. If this works you're a saint!
ryude said:
Thanks I'll try putting speedmod in there instead. If this works you're a saint!
Click to expand...
Click to collapse
run logcat while booting and it will tell you where its dying
Pirateghost said:
run logcat while booting and it will tell you where its dying
Click to expand...
Click to collapse
Yeah, I just thought of that too
Alright guys i have searched and tried and tried. Currently i am on dj11 with kernal version stated as 2.6.32.9 and right below it has [email protected]#3. I am on 2.2
So what ive tried:
-I used heimdall to flash back to stock but as you can see the kernal version says im still rooted although superuser app is not installed. This causes the update to fail
-I tried to use superoneclick method to unroot but it does not work
What i want is to be stock with no root and be able to update. Any help or suggestions would be appreciated.
FYI i also used all the thread procedures on the forum (gizmo ninja and how to unbrick tab)
Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587
TabFreak said:
Try using this stock unrooted rom. Link below:
http://forum.xda-developers.com/showthread.php?t=1136587
Click to expand...
Click to collapse
i believe i tried that already and it still had the words "rooted" under the kernal version. It also didnt allow me to update. I will try it again.
Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.
TabFreak said:
Try this instead.
http://forum.xda-developers.com/showthread.php?t=1033586
The second link takes you to the files.
Click to expand...
Click to collapse
Will try now. Ahh I hope this works!
killerapl said:
Will try now. Ahh I hope this works!
Click to expand...
Click to collapse
Flashed and guess what?? Didnt work. Kernal version still says 2.6.32.9 [email protected] Ugh!!!
Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.
TabFreak said:
Don't know what the problem could be. That has always worked for me. If you go to the "System-- About Device-- System Updates" does it give you the option to update? When I have restocked mine and set up a wireless connection it always tries to download and install the update.
Click to expand...
Click to collapse
Yeah it does. Goes halfway and then stops and has exclamation mark. I tried gizmoninjas method to update but still quits. I'm totally lost.
Sent from my SCH-I510 using XDA App
I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.
TabFreak said:
I don't know what to do. If it were me I would go ahead and grab the EC02 update from here: http://www.blackmugmedia.com/Android/GT/Mirror/Roms/CDMA/Recovery to Stock /
Flash that. You will have the latest official release, or you could get the VZW Leaked Gingerbread release from the Developers section. (That is what I am running on my VZW tab).
Maybe if you flashed the EC02 update and then used the going back to stock instructions it would unroot you. I have always unrooted using that rom and directions when I wanted to start fresh from a custom rom that didn't quite work like I wanted it to work.
Click to expand...
Click to collapse
I will give that a shot. The current gb leak is rooted. I did post asking to see if they (oldmacnut) had the unrooted version. Personally I like the rooted option but I do want to sell the tab and can't sell it rooted unless the person doesn't care. Bedside this issue the tab is fine and working properly.
Thank you so much for all your help. I will keeep you posted on the outcome.
Nope didn't work. Still rooted. I'm so over this hahah
Sent from my SCH-I510 using XDA App
I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!
TabFreak said:
I am at a loss. I know there are ways to get this done, but I have no idea where you can go from here. Not an expert, sorry!
Click to expand...
Click to collapse
There has to be. Wish it was like my Droid charge and just flash via Odin. If I can get the ginerbreak leak with no root I will be happy.
Or sell it to someone that doesn't mind its rooted.
Sent from my SCH-I510 using XDA App
There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.
TabFreak said:
There is a unrooted version of Gingerbread that you can flash with Odin:
http://www.mydroidworld.com/forums/...w-sprint-2-3-4-ef01-rooted-updated8-15-a.html
I haven't used Odin, but if you are familiar with it you might have luck with this. I think you use 7zip to extract and then use the resulting md5 file in the One Package location. You might want to look there and get that file.[/QU
I'm gonna give it a try tomorrow. I just have to make sure if I flash under phone or PDA with Odin. Don't know if you know. For phones its PDA. Not sure with tabs. Thank you so much
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.
TabFreak said:
I just tried this.
Unzip the .md5 file with 7zip, you will get an error about no proper ending or something. Take your zimage, cache, param, dbdata, factoryfs, recovery.bin and place them in the proper locations in Heimdall. Flash your tab and let it boot up.
You should have a fully functional gingerbread without root.
I just did it on my tab.
Click to expand...
Click to collapse
You effin rock!!! It worked! I now have non rooted stock gingerbread. Thank you for all your help and investigation for the right files. Youre awesome. Now time to sell this baby
Or i spent so much time doing this i think im attached now hahaha
Glad it worked the way you wanted. I went back to the rooted version of Gingerbread. Everything works the way I want it to so no reason to change (for now anyway).
Finally we have gingerbread! Thing is im not sure how to update to it. Ive searched and read everything but it doesnt make much sense. Ever since GB came out I see things like zv4, zv6, zv7...I dont know what those are and some of the tuts for gb require those or something.
Here is what I have. Im currently on the revolt rom 1.5 and I have the stock rom that the cubed uploaded as well. I also have cwm. Not sure if this helps. Im a super noob and this is the first android phone phone ive ever had. Can someone point me in the right direction? Thanks
Torin
Torin_93 said:
Finally we have gingerbread! Thing is im not sure how to update to it. Ive searched and read everything but it doesnt make much sense. Ever since GB came out I see things like zv4, zv6, zv7...I dont know what those are and some of the tuts for gb require those or something.
Here is what I have. Im currently on the revolt rom 1.5 and I have the stock rom that the cubed uploaded as well. I also have cwm. Not sure if this helps. Im a super noob and this is the first android phone phone ive ever had. Can someone point me in the right direction? Thanks
Torin
Click to expand...
Click to collapse
Alright, here it goes
1) Download and install this on your external sd card http://forum.xda-developers.com/showthread.php?t=1326893
2) Boot into recovery and flash that zip (will replace /system and /boot)
3) Install and run revotoolkit found here http://forum.xda-developers.com/showthread.php?t=1144951
4) Click install recovery and select !!Revo_stock!!
5) Reboot phone
6) Check for updates. It's that easy.
mtmichaelson said:
Alright, here it goes
1) Download and install this on your external sd card http://forum.xda-developers.com/showthread.php?t=1326893
2) Boot into recovery and flash that zip (will replace /system and /boot)
3) Install and run revotoolkit found here http://forum.xda-developers.com/showthread.php?t=1144951
4) Click install recovery and select !!Revo_stock!!
5) Reboot phone
6) Check for updates. It's that easy.
Click to expand...
Click to collapse
And we have MTM to the rescue! Im giving it a try now! Thanks for compiling simple instructions!
After these steps I can put gingervolt on and put cwm back on using the revo toolkit?
Torin_93 said:
After these steps I can put gingervolt on and put cwm back on using the revo toolkit?
Click to expand...
Click to collapse
Yeppers. After you root, install cwm with revotoolkit, and reboot into recovery using revotoolkit.
Sent from my VS910 4G using xda premium
mtmichaelson said:
Alright, here it goes
1) Download and install this on your external sd card http://forum.xda-developers.com/showthread.php?t=1326893
2) Boot into recovery and flash that zip (will replace /system and /boot)
3) Install and run revotoolkit found here http://forum.xda-developers.com/showthread.php?t=1144951
4) Click install recovery and select !!Revo_stock!!
5) Reboot phone
6) Check for updates. It's that easy.
Click to expand...
Click to collapse
Awesome, concise and accurate. You are da man!! Not only do you make a great product, you have impeccable service to those of us who need help. Thanks!!
Torin_93 said:
And we have MTM to the rescue! Im giving it a try now! Thanks for compiling simple instructions!
Click to expand...
Click to collapse
Lol i tried this and then installing stock recovery it said md5 mismatch...i give up
Sent from my VS910 4G using Tapatalk
Soooooooo I did these steps and updated but im still n 2.2.2. What gives?
Now im not even rooted
If you're tired of waiting for the OTA, head over to firmware page and follow the instructions. and give mtmichaelson a "thanks"
btroop said:
If you're tired of waiting for the OTA, head over to firmware page and follow the instructions. and give mtmichaelson a "thanks"
Click to expand...
Click to collapse
You mean Jackpot?
majorpay said:
You mean Jackpot?
Click to expand...
Click to collapse
You mean they're not the same person?
Torin_93 said:
Soooooooo I did these steps and updated but im still n 2.2.2. What gives?
Click to expand...
Click to collapse
I'm glad to hear I wasn't the only one confused by those instructions at first . My first assumption when reading all these posts were that V4 V6 and V7 were hardware versions of the Revo and you were suppose to download the Gingerbread TOT in correlation to your hardware. Here's what You need to know. They are just software update versions.
V4 and V6 are Froyo
V7 is Gingerbread.
Install V7 and you'll be all set
got it worked out
so i already have clockworkmod recovery installed and i downloaded ThrillSeeker_beta5.2-FULL.zip and i wiped cache and then dalvik cache then went to install zip from sd card then i selected the rom and it looks like is getting ready to download and it says "installation aborted" someone please help
did you? wipe data/factory reset
Also create a backup
iLogic86 said:
did you? wipe data/factory reset
Also create a backup
Click to expand...
Click to collapse
It has nothing to do with data.
I would advise re-downloading. If there is an error in the updater-script file, then you'll have no chance in installing it.
all right then ill try redownloading the rom btw i have cwm 5.0.2.0
soccerdude612 said:
all right then ill try redownloading the rom btw i have cwm 5.0.2.0
Click to expand...
Click to collapse
Where'd you get it from? Try installing this one instead.
SEE POST
i already tried using that and it was too much so i used the terminal emulator way that had worked for many so idk
NOTHING WORKS I DOWNLOADED A DIFFERENT ROM AND SAME NO LUCK! I REALLY NEED HELP:/ lol i just hate the stock rom can someone like make a video on how to flash a rom for LG thrill with links and everything please i know there are a lot of smart people out there!
NOTHING WORKS I DOWNLOADED A DIFFERENT ROM AND SAME NO LUCK! I REALLY NEED HELP:/ lol i just hate the stock rom can someone like make a video on how to flash a rom for LG thrill with links and everything please i know there are a lot of smart people out there!
Click to expand...
Click to collapse
I can assist. Lol
I'll upload a recovery package when I get home.
Sent from my Samsung Galaxy S II
Thanks a lot i really hopes this works because i really don't like the stock rom for the lg thrill!
soccerdude612 said:
Thanks a lot i really hopes this works because i really don't like the stock rom for the lg thrill!
Click to expand...
Click to collapse
Check the Development section in the "Return To Stock" thread. It's on the last page.
Sent from my Samsung Galaxy S II
okay ill do that right now!
wait but what am i supposed to do there? lol sorry I'm trying to flash a different rom not the stock rom or is there a download there for me?
soccerdude612 said:
wait but what am i supposed to do there? lol sorry I'm trying to flash a different rom not the stock rom or is there a download there for me?
Click to expand...
Click to collapse
There's a download at the last page that flashes the recovery.
Sent from my Samsung Galaxy S II
is the " THRILL RECOVERY MANAGER.7z"?
I reuploaded that.
I managed to find an error in it.
Computers without ADB installed globally will get an error.
Redownload in the new thread I just posted.
so what do i do after i downloaded it?
Instructions are here.
SEE THREAD
okay ill try it if this works i will defiantly will donate!
ALL LINKS ARE KILLED UNTIL I GET TIME.
I'm doing developing at work.
EDIT: Necessary files located in [TOOLS]Making Developing/Flashing/Returning to Stock Easier