Related
can anybody help me i want to root my phone but im using the new beta build of froyo the button combos are not working.
im using samsung captivate
ademejia said:
can anybody help me i want to root my phone but im using the new beta build of froyo the button combos are not working
Click to expand...
Click to collapse
You have to flash a stock captivate kernel, use the key combo, run the update package, then flash back to the JPH kernel again
Zilch25 said:
You have to flash a stock captivate kernel, use the key combo, run the update package, then flash back to the JPH kernel again
Click to expand...
Click to collapse
won't that not work since it's a 2.2 build and we have no available kernels?
did Zilch finally make a mistake? AND I CAUGHT IT!?!?
okay i will try it
I was always under the assumption that with a 2.2 ROM, a 2.1 kernel won't boot (even to recovery, though I assume since it can get to download it can get to recovery now that I think about it) as long as you flash the JPH kernel back immediately after before you boot?
maybe I didn't catch Zilch making a mistake =(
Kaik541 said:
won't that not work since it's a 2.2 build and we have no available kernels?
did Zilch finally make a mistake? AND I CAUGHT IT!?!?
Click to expand...
Click to collapse
Nope, I'm right =P
You have to use it to get the recovery so that you can use our key combos (and power as select), install the package, then flash back. The phone won't BOOT without the JPH kernel but it will get to recovery =P
Ps. NEENER
Zilch25 said:
Nope, I'm right =P
You have to use it to get the recovery so that you can use our key combos (and power as select), install the package, then flash back. The phone won't BOOT without the JPH kernel but it will get to recovery =P
Ps. NEENER
Click to expand...
Click to collapse
one of these days, you'll be drunk or tired and I'll catch you, and then I'll steal your throne!
MWAHAHAAH!
err... *ahem* so yes, booting into recovery to root is possible. just flash back
Kaik541 said:
one of these days, you'll be drunk or tired and I'll catch you, and then I'll steal your throne!
MWAHAHAAH!
err... *ahem* so yes, booting into recovery to root is possible. just flash back
Click to expand...
Click to collapse
I dunno, most likely if I'm drunk I won't be posting on XDA
ummm where can i get a jph kernel. is that the 802 pit file ?
Zilch25 said:
I dunno, most likely if I'm drunk I won't be posting on XDA
Click to expand...
Click to collapse
haha everyone has lonely nights! let me have my dreams
ademejia said:
ummm where can i get a jph kernel. is that the 802 pit file ?
Click to expand...
Click to collapse
the JPH kernel will be inside the flashable package. look for a file named zimage.tar
was meant to imply the kernel was in there, didn't think he wouldn't know what to do with it... zZzzzZzzzzZZZZzz
Kaik541 said:
the JPH kernel will be inside the flashable package. look for a file named zimage.tar
Click to expand...
Click to collapse
No no no, if he does that the zImage file won't be flashable, unless he's on a linux box and can repackage it.
Go to the I9000 forums and find one of the threads about rooting JPH, they have a handy zip that contains the JPH kernel and the update.zip for rooting
Zilch25 said:
No no no, if he does that the zImage file won't be flashable, unless he's on a linux box and can repackage it.
Go to the I9000 forums and find one of the threads about rooting JPH, they have a handy zip that contains the JPH kernel and the update.zip for rooting
Click to expand...
Click to collapse
SHOWS WHAT I KNOW. now you're catching me giving bad advice. today is not my day. I'm gonna go sit and watch Jersey Shore and feel better about myself.
Kaik541 said:
SHOWS WHAT I KNOW. now you're catching me giving bad advice. today is not my day. I'm gonna go sit and watch Jersey Shore and feel better about myself.
Click to expand...
Click to collapse
MUAHAHAHA My how the tables have turned!
when i made my selection of updating the zip then i press power button nothing happens leaves me stuck.
i did the captivate kernel then then i did the recovery to root and applied it. then i flash back the i9000 jhp kernel it wont make my selection to reboot and go in to the os.
ademejia said:
when i made my selection of updating the zip then i press power button nothing happens leaves me stuck.
i did the captivate kernel then then i did the recovery to root and applied it. then i flash back the i9000 jhp kernel it wont make my selection to reboot and go in to the os.
Click to expand...
Click to collapse
I'm curious why it's going back into recovery again- just hook your phone up to your computer and go into your adb folder and type: adb reboot
ademejia said:
ummm where can i get a jph kernel. is that the 802 pit file ?
Click to expand...
Click to collapse
stock kernel is the 2.6.29 [email protected] #2 right?
androidftwin said:
stock kernel is the 2.6.29 [email protected] #2 right?
Click to expand...
Click to collapse
Yup, thats stock captivate
I curious as to why people lately have been trying the i9000 jph? Yes, I would want 2.2 also but that thing is not made for these phones and with all the people lately having trouble, why bother? Just flash back to stock, use adb if buttons don't work, and load Eugene's captivate hybrid. It's fast, doesn't have the att/samsung bloat, and it works without bricking our phones.
bobbylx said:
I curious as to why people lately have been trying the i9000 jph? Yes, I would 2.2 also but that that thing is not made for these phones and with all the people lately having trouble, why bother? Just flash back to stock, use adb if buttons don't work, and load Eugene's captivate hybrid. It's fast, doesn't have the att/samsung bloat, and it works without bricking our phones.
Click to expand...
Click to collapse
Eh JPH works fine on the Captivate (even external SD shockingly enough)- it's just not that great of an upgrade period though =P
Thanks to Gilbar for putting this together!
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR DEVICE.
I've found I like running this with the JK6 modem the best since most of the mods out right now are for JK2. I uploaded some mirrors for everyone's convenience. Enjoy.
MIRRORS: http://www.multiupload.com/PZXBZO0NW9
gilbar said:
Here, try this. Works for me, might for you as well.
http://www.4shared.com/file/zpr_A5zq/Vibrant_JK2_Stock_Deodexed.html
Click to expand...
Click to collapse
Hawkularxda said:
Hello XDA Community!
I was wondering if someone would be so kinda as to upload a fully deodexed version of the newly leaked stock JK2. Thank you.
Click to expand...
Click to collapse
Sooo... I have a deodexed vesion that I made that I can post, just tested it on my phone, and it works, but I don't have an account on any site to upload the file to. If someone wants to PM me with information on somewhere to upload it, I can.
There is one on my site from a while ago.
I will make a new thread for it after I get back.
However, here it is for now.
If you like this ROM please visit our site: Devs4Android
MD5: 95538DD5561BB8853331BD34EDAAE85F
Password: "Devs4Android"
Master™ said:
There is one on my site from a while ago.
I will make a new thread for it after I get back.
However, here it is for now.
Click to expand...
Click to collapse
Hey Master, thanks! I tried this one earlier though and for some reason my phone just bootlooped the Vibrant screen. Not sure what happened, but that was after using Odin to go to Stock JFD.
Hawkularxda said:
Hey Master, thanks! I tried this one earlier though and for some reason my phone just bootlooped the Vibrant screen. Not sure what happened, but that was after using Odin to go to Stock JFD.
Click to expand...
Click to collapse
Yeah, so your post in my thread.
I tried it and it worked fine for me...
Any logcat?
Hawkularxda said:
Hey Master, thanks! I tried this one earlier though and for some reason my phone just bootlooped the Vibrant screen. Not sure what happened, but that was after using Odin to go to Stock JFD.
Click to expand...
Click to collapse
Here, try this. Works for me, might for you as well.
http://www.4shared.com/file/zpr_A5zq/Vibrant_JK2_Stock_Deodexed.html
gilbar said:
Here, try this. Works for me, might for you as well.
http://www.4shared.com/file/zpr_A5zq/Vibrant_JK2_Stock_Deodexed.html
Click to expand...
Click to collapse
downloading now, gonna give it a shot!! thanks!
gilbar said:
Here, try this. Works for me, might for you as well.
http://www.4shared.com/file/zpr_A5zq/Vibrant_JK2_Stock_Deodexed.html
Click to expand...
Click to collapse
This worked like a charm. Thank you. I was even able to apply s0niqu3's mod no problem.
Master™ said:
There is one on my site from a while ago.
I will make a new thread for it after I get back.
However, here it is for now.
If you like this ROM please visit our site: Devs4Android
MD5: 95538DD5561BB8853331BD34EDAAE85F
Password: "Devs4Android"
Click to expand...
Click to collapse
hehehe
thanks for this
Is this with 2e or 3e recovery? I'd like a stock JK2 deodex w/ untermensch's modified 3e recovery, but probably too much to hope for unless I do it myself.
Sent via XDA app on my Samsung Vibrant
•ROM:StockJI6»Rooted&Deodexed
•Kernel:ttabbal's»z4mod+bklght
•Mods:MobileAp/MultiLock/AccBat
Siks said:
Is this with 2e or 3e recovery? I'd like a stock JK2 deodex w/ untermensch's modified 3e recovery, but probably too much to hope for unless I do it myself.
Sent via XDA app on my Samsung Vibrant
•ROM:StockJI6»Rooted&Deodexed
•Kernel:ttabbal's»z4mod+bklght
•Mods:MobileAp/MultiLock/AccBat
Click to expand...
Click to collapse
It is with the 2e recovery, but the 3e from Untermensch is VERY easy to install. Just copy the "recovery" file into the /system/bin/ directory. If you use the version that disables checking, not the one with the key... it's slightly easier to install.
Brick!! help Odin not working.
Why do you want a deodexed rom? Deodexing slows it down. It takes less space but so what?
grennis said:
Why do you want a deodexed rom? Deodexing slows it down. It takes less space but so what?
Click to expand...
Click to collapse
you can theme it how you want and pretty much do what you want with it
Recovery is not working on this ROM, I flashed it because someone was supposed to buy the phone from me this weekend, and this morning when I tried to get it into recovery, it just sits there and hangs at the Vibrant screen both if I am trying to get into recovery and trying to boot it up normally.
When I get off work I am going to try the ODIN version to see if I can't at least get it back to stock and get a recovery working with the ROM today. I will let everyone know when I get it working.
Flash the Rom, and install the install busybox app from the market. Install busy box, reboot and then see if you can get into recovery.
It's weird, but the same issue was encountered in the aospish Rom thread and that fixed it.
"if you amplify everything, nothing is heard"
See I would do that if it didn't hang on the Vibrant screen even when I am booting up without trying to go into recovery, and I don't have my laptop handy to be able to just try to adb reboot
gothdroid said:
See I would do that if it didn't hang on the Vibrant screen even when I am booting up without trying to go into recovery, and I don't have my laptop handy to be able to just try to adb reboot
Click to expand...
Click to collapse
Which one did you flash? I flashed the one Master provided and it hung at the Vibrant screen... the one Gilbar uploaded worked out just fine.
Whitehawkx said:
Which one did you flash? I flashed the one Master provided and it hung at the Vibrant screen... the one Gilbar uploaded worked out just fine.
Click to expand...
Click to collapse
Flashed the one from the first post, and it booted up fine the first couple times, then I tried to boot into recovery via quick boot, and that is when everything went to hell
All of these stock ROMs are getting stuck on the Vibrant screen when dealing with recovery. Does this happen if you use the updated 3e recovery?
Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!
Serenadier said:
Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!
Click to expand...
Click to collapse
Wildfire wrong section, this mini thread
apisfires said:
Wildfire wrong section, this mini thread
Click to expand...
Click to collapse
I mean I've done it before on my Wildfire, but there's a problem with this on the Galaxy Mini. Problem phone in question is the Galaxy Mini now.
Sorry for the misunderstanding.. any help you can offer me?
installed from where and how?
kandros said:
installed from where and how?
Click to expand...
Click to collapse
Okay so first I downloaded the OPS, Gingerbread firmware and ODIN. Then I installed Kies for drivers, and then I opened ODIN, inserted the OPS and Gingerbread firmware file, started the process.
Somehow when it came to the reboot part, the phone just kept rebooting (screen lights up, turns off, pause, repeats again) and it hasn't worked since.
Then now there's an error with setup connection which presumably has something to do with the drivers, so I reinstalled it but now setup connection keeps occurring...
Okay, now, I tried doing the whole process again... I'm stuck at 'Close serial port and wait until rebooting' as the phone constantly flickers on and off repeatedly with no sign of anything going on.
Somebody please help :/
Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?
Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App
Small_town_boy said:
Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
roofrider said:
Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?
Click to expand...
Click to collapse
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..
download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk
Serenadier said:
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..
Click to expand...
Click to collapse
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong
Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?
kandros said:
download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk
Click to expand...
Click to collapse
Even when the firmware is being flashed, the screen constantly flashes on and off. Is this normal?
I'd try that, but I don't know if it would work...
roofrider said:
Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?
Click to expand...
Click to collapse
I'm on Asia version, I downloaded a 2.3.4 Asian version too.
apisfires said:
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong
Click to expand...
Click to collapse
1. From ODIN 4.38 + Tass.Ops.rar -
a. Tass_V1.0.ops
b. S5570_Odin Multi Downloader v4.38.exe
2. S5570DXKPD_S5570OLBKPD.zip
I don't think it's wrong, is it...?
Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.
dkn91 said:
Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.
Click to expand...
Click to collapse
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.
Serenadier said:
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.
Click to expand...
Click to collapse
Try flashing a 2.3.3 multi package firmware
roofrider said:
Try flashing a 2.3.3 multi package firmware
Click to expand...
Click to collapse
Doing that right away.
Is it normal for the phone to flicker on and off during the flash process, and after the flash process is complete, with ODIN showing PASS?
Okay, so installing a multi package firmware didn't work either. Now what. )': at wit's end here.
It won't flicker.
And when it's done it'll show pass.
While in download mode, Odin shows connected rite? A yellow box Appears?
hi all, Just got the gnote a week ago. rooted and flashed with the rocket rom and AbyssNote kernel. Everything went ok, but until I want try out another rom.
I can get to CWM menu, but cannot choose anything from there. It just 'blink' when i pressed up or down or the home key.
I was thinking to reinstall the cwm, but realise I don't have stock kernel anymore. I don't know why cwm get corrupted, it was working fine yesterday. i would be appreciated if someone can tell me what is the best way to get the cwm working again.
many thanks in advance
I can't quite understand it myself either. I've never even heard of a recovery becoming corrupted until I got the Galaxy Note, now it's become a nightmare just trying to get my phone back...all you can do is keep flashing and keep on flashing with ODIN (Heimdall in my case). Hopefully someone else will have some words of advice, because this is a serious problem...and an incredibly frustrating one at that.
cielbleu said:
hi all, Just got the gnote a week ago. rooted and flashed with the rocket rom and AbyssNote kernel.
Click to expand...
Click to collapse
Which version of the AbyssNote kernel would that be?
hi smalmagal, thanks for your reply. have you got the cmw working again in the end? I have been using HTC for last 2 years, and never had any issue with the cmw.
My gnote is working fine apart from the cmw, I was planning to use my desire as my main phone until this weekend and let the gnote take over it, but I think it need to be postponed now.
Which version of the AbyssNote kernel would that be?
Click to expand...
Click to collapse
hi chasmodo, it is v4.1 thanks.
cielbleu said:
hi chasmodo, it is v4.1 thanks.
Click to expand...
Click to collapse
It's a touch recovery, is it not? You cannot move about it by clicking on your volume button. Are you trying to choose like that?
chasmodo said:
It's a touch recovery, is it not? You cannot move about it by clicking on your volume button. Are you trying to choose like that?
Click to expand...
Click to collapse
yes it is a touch recovery. cwm v5.8.1.5 thanks
cielbleu said:
yes it is a touch recovery. cwm v5.8.1.5 thanks
Click to expand...
Click to collapse
Try touching your choice in cwm instead of choosing via volume controls, thats what chasmodo is saying.
thanksss
how stupid i am!!!
all the best to those having problems with cmw
Hey guys, I'm new to this forum and I got my Galaxy Note a few weeks ago.
And today I tried to root it, but I think somehow it went wrong, now my Note could be turnned on, but the screen just stayed black. No logo, just sounds. The two 'buttons' below would light up too.
Any suggestions on how to fix it?
Try to go into download mode and reflash a gb stock rom via odin
Sent from my GT-N7000 using xda app-developers app
Jestina said:
Hey guys, I'm new to this forum and I got my Galaxy Note a few weeks ago.
And today I tried to root it, but I think somehow it went wrong, now my Note could be turnned on, but the screen just stayed black. No logo, just sounds. The two 'buttons' below would light up too.
Any suggestions on how to fix it?
Click to expand...
Click to collapse
Why do you not give us a few more details?
What did you do, where did you start, what went wrong?
ThaiDai said:
Why do you not give us a few more details?
What did you do, where did you start, what went wrong?
Click to expand...
Click to collapse
Okay, I tried to root it using a pre-rooted rom, N7000DXLC2 and some md5 and tar file that came along with it, but I'm not sure if I'm doing it correctly, my actual baseband is LR1 and the kernel is LR2.
At first, after attempting to root it, I kinda of did it successfully, I reached the green android alien place, but there's alot of pop up saying that this progress ended (something like that, couldn't remember.)
So I decided, to find and download my actual baseband's stock rom and try to use Odin to flash it, it succeeded, but the problem is, my screen is staying black this time, But I know that my phone is still working, just that the screen is not displaying anything..
Are you able to get into download mode?
When you tried to flash the rooted ROM in ODIN was it a 3 part file or a single file?
Did you setup ODIN correctly as per instructions on this site?
CJSlim79 said:
Are you able to get into download mode?
When you tried to flash the rooted ROM in ODIN was it a 3 part file or a single file?
Did you setup ODIN correctly as per instructions on this site?
Click to expand...
Click to collapse
Yeah I did get into the download mode, the first ROM was 3 part file, second one was a single file.. and yeah setup correctly.
Nobody knows a fix for this?
Jestina said:
Nobody knows a fix for this?
Click to expand...
Click to collapse
Ok -
You can get back into download mode - what happens when you try to flash a stock GB ROM in PC Odin, *Use a 1 part file from here*
http://forum.xda-developers.com/showthread.php?p=26455511#post26455511
You need to provide as much info as you can otherwise it is hard to help...
In ODIN - You said it was setup correctly? Where did you confirm this?
Jestina said:
Nobody knows a fix for this?
Click to expand...
Click to collapse
Read here. http://androidadvices.com/update-galaxy-note-n7000-gingerbread-xxlc1-236-firmware/2/
Read it carefully and do it at your own risk if you decide to flash it.
I don't think it'll work.. I'm already back on my actual baseband, its just the problem with the screen, its black and it won't display anything. My phone is still working.
Jestina said:
I don't think it'll work.. I'm already back on my actual baseband, its just the problem with the screen, its black and it won't display anything. My phone is still working.
Click to expand...
Click to collapse
Are you on a complete STOCK setup? or custom kernel?
This is very odd - sounds like possible hardware fault if your phone is working but no screen - You definitely flashed the correct ROM yeah? I would still give a try to reflashing the STOCK GB via PC Odin..
Question - When you goto Download Mode - Do you see the Android Guy? If so there's something wrong with your flashed ROM and not a screen fault so a re-flash should resolve that..
+1, Definitely not a screen problem if you are able to go in download mode & see the green guy.
Just try to reflash via PC odin a GB ROM.
CJSlim79 said:
Are you on a complete STOCK setup? or custom kernel?
This is very odd - sounds like possible hardware fault if your phone is working but no screen - You definitely flashed the correct ROM yeah? I would still give a try to reflashing the STOCK GB via PC Odin..
Question - When you goto Download Mode - Do you see the Android Guy? If so there's something wrong with your flashed ROM and not a screen fault so a re-flash should resolve that..
Click to expand...
Click to collapse
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Jestina said:
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Click to expand...
Click to collapse
Ok but in download mode - do you see the Android guy?.....or girl..........
If not there's a chance you've a screen problem.. or you flashed something you shouldn't have...
Give the Stock GB Flash a go through ODIN and report back..
Black Screen
Jestina said:
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Click to expand...
Click to collapse
First sorry for my english.
If your phone is open but screen is not open. TRY following steps.
Flash this rom with Odin ( N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar )
Kernel: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
if loading stop to hidden.img dont worry. try again loading rom.
i think solving the problem.
CJSlim79 said:
Ok but in download mode - do you see the Android guy?....or girl..????........
..
Click to expand...
Click to collapse
Seriously... your kidding right??
geist_100 said:
First sorry for my english.
If your phone is open but screen is not open. TRY following steps.
Flash this rom with Odin ( N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar )
Kernel: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
if loading stop to hidden.img dont worry. try again loading rom.
i think solving the problem.
Click to expand...
Click to collapse
I would go with this route as well
@OP, I think what messed up your phone is you inadvertently flash either a wrong kernel..(a kernel meant for GB but your already on ICS or the other way around as well)
had the same issue you have before... **** I flashed a kernel not design for our NOTE....
After that, my phone just stays black.. but I could actually go to download mode... so what I did? Flashed it back to GB stock and work my way from there...
Hope that helps something bud
Cheers!
CJSlim79 said:
Ok but in download mode - do you see the Android guy?.....or girl..........
If not there's a chance you've a screen problem.. or you flashed something you shouldn't have...
Give the Stock GB Flash a go through ODIN and report back..
Click to expand...
Click to collapse
lol that cracked me up thanks,
Thought android was androgenious, mwahahah
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
lol that cracked me up thanks,
Thought android was androgenious, mwahahah
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I'm pleased a couple of people picked up on it
Erm.. I've downloaded the CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5, but when I open it up its a zImage file.
What am I suppose to do with it? x_x
Edit; Nvm, got it!
letters_to_cleo said:
Seriously... your kidding right??
I would go with this route as well
@OP, I think what messed up your phone is you inadvertently flash either a wrong kernel..(a kernel meant for GB but your already on ICS or the other way around as well)
had the same issue you have before... **** I flashed a kernel not design for our NOTE....
After that, my phone just stays black.. but I could actually go to download mode... so what I did? Flashed it back to GB stock and work my way from there...
Hope that helps something bud
Cheers!
Click to expand...
Click to collapse
I did what you said, but now my note still stays black.. I guess its my screen problem now huh.. Weird..