Related
Hello Everyone.
I'm new to the forum and this is my first post, although have been reading and applying a lot of knowledge you guys have! the forum is great!
Anyway, I have an unlocked HTC TyTN II, everything worked fine and I overall very satisfied with the device...
I made a foolish thing! I installed the "Wefi" utility and after playing with it for a little while, I didn't like the thing.. so, I decided to uninstall it.. however, now I find that my kaiser cannot longer connect automatically to my wireless networks after resume.. Now I only get the notification that it has found available wireless networks and, even though I chose not to show the message anymore, it does it every time, and when it does not, the phone doesn't connect to my WiFi.. so I need to do it manually... which is very annoying..
I already restored original registry keys under HLM\Comm\TNETW12511\Parms with no luck so far...
What can I do?... I'm still on the original WM 6.0, have not loaded any ROM changes yet..
Your help would be highly appreciated.
Thanks!
Oscar
Fix for auto connect problem after removing WeFi
My name is Galia Finkelstein and I work at the support desk at WeFi. This doesn't happen anymore on the new version that's been released so for the older version we have a version fix for the problem with the automatic connection, just run this file and you should be good to go http://wefi.com/static/RestoreZCAutoConnect.exe
If I can assist with anything else please drop me a line at [email protected].
WeFi post-uninstall problems
Hi!
I am sufferring from the same problems as "obadillo" - see above.
I downloaded and installed the latest version of WeFi, but after a couple of days of use, I found that I didn't like it, and it also took up too much of my valuable "today" screen space.
After uninstalling, I found that firstly, all my previous wi-fi settings had been lost (WEP keys for my home network, my work network etc etc), and secondly, even after re-enterring these details, my device (HTC Touch UK Version - Orange UK) - (running WM6 Pro) refused to auto-connect when I switch the WiFi on.
After reading the reply from Galia (directly above my post), I downloaded and ran the executable, but found that it made no difference.
Any ideas anyone? I did email Wefi's support email address, but as yet have received no reply.
Thanks in advance!
I have also tried this fix with no success (running WM5). I have also sent an email to wefi support. No response. I would recommend you stay away from this software.
We-Fi Latest Version
I have found a (kind of) solution! I have installed the latest version of We-Fi (downloaded from their website), and then DEselected it in my Today programs. So even though its not in use, its wifi parameters still overrule the PPCs local params. This seems to allow me to switch on and off WiFi WITHOUT using the WeFi software, and it now autoconnects, even with the several wireless networks I have stored, whenever I switch WiFi on, it may take a few seconds to connect, but it now does every time.
Not the greatest "solution", but at least the problem is partially solved.
But as the good man above says, unless you're VERY sure you want to install WeFi, do not install, because you will lose ALL preexisiting WiFi connections and settings etc..
Have a good one!
-=namwollem=-
Hello again, XDA devs!
I also had the problem and I'm struggling with Amir, some guy from the WeFi staff, to get the problem solved or at least recognized.
I left a complete description on my blog with links to people having problems. Here's the article (without links):
Before you consider installing WeFi on your Windows Mobile device, you might want to read this cautiously and save yourself some problems.
If you have not yet tried it, you're not missing much. Although promising, the app takes over your device. It controls your today screen, messes up your wi-fi parameters and some rarer stability issues were also reported.
First, the app needs .Net CF v.2.0, something that takes space and puts more useless crap on your device. Then the app doesn't just find networks and connect to them. Instead it overrides your wi-fi parameters and inserts its own code, thus the uninstallation problems. WeFi also takes a lot of your today screen's estate for basically nothing. How much screen space? Take a look.
Upon uninstalling it, many noticed their devices stopped automatically connecting to wireless networks, among other, rarer problems. The only known fix to the problem is to hard-reset your device and to stay the **** away from this app. We also saw a link to a .exe file somewhere but no one left feedback about it so we assume it's just as good as WeFi. You might also reinstall it, hide it and use it to take care of the wi-fi stuff or go in Settings>Connections>Wi-Fi everytime to select a network to connect to.
The developers were quick to comment about the problem and said they are working on it (see the first comment to this post). However their product page doesn't mention the problem yet and people still get caught. I left them feedback about *some* of the concerned device, assuming it's not all of them, hoping for a change. Feel free to do the same and put some pressure on these guys too.
You might also read one of those threads and see for yourself.
-Nico
Click to expand...
Click to collapse
Full article: http://nicbou.com/2008/07/09/do-not-install…-you-pocket-pcdo-not-install-wefi-on-you-pocket-pc/
I'm trying to get the warning to reach all the download spots, if you guys feel like helping. This is just unacceptable, let's do something about it!
Haim head of WeFi Windows Mobile development team here
Hello all,
First, let me assure you all that we are doing our best to solve any user problem as quickly as possible.
Out of the thousands of mobile users we have, there are really only a few users who complained about this problem.
We released a fix that you can find in: http://www.wefi.com/download/client/RestoreZCAutoConnect.exe
which after executing and doing soft reset should solve the problem.
As our support team explained to “primemaps” via e-mails (sent in 08/07) this fix only works if you uninstall WeFi first.
What you are all describing is that ZeroConfig stopped auto connecting.
By avoiding the manipulation of ZeroConfig default timeouts in our next version (which should be released in about 2 weeks from now), this should not happen anymore.
If this does not help you or you have encountered any other problem – please send me an email to [email protected] and I promise a fast response,
it would help if you mentioned your WeFi version, Device model and ActiveSync version.
I hope you would all choose to install our next version and enjoy the many benefits it can bring you.
Haim
Can't work with it and can't work without it
With my HTC TyTN II I had similar problems as others have described, or maybe even worse: I could no longer work to any wireless networks. It would disconnect in less than one second every time.
I did a hard reset and that didn't work!
I also tried the "fix" the WeFi representative suggested but that didn't help at all either.
What finally helped me was Namwollem's solution: Install WeFi again and removed it from the Today screen (but kept it installed).
I can't help wonder if WeFi changes something in the ROM since a hard reset didn't even fix it.
One of these days I will have to install the ROM all over and see if it makes a difference, but I wish I could avoid that!
I hope others won't be stupid like me and install this #$%[email protected]#&$ software!
Nothing helps for my Diamond to restore Wifi signal
I have Htc diamond with newest Rom downloaded from htc.com.
My problem is that since i installed aplication WEFI(older version) and uninstalled it, i cannot see ANY available wifi networks.. I tried alot of things. I tried soft reset, hard reset, i installed WEFI (newest version) , in moments wifi works and shows available networks and i can connect, but after it doesnt work again.. I would say it shows networks only ocasionally(even if im always surrounded by at least 10 hotspots). I installed newest Rom again, i installed old official ROM, i always put mamximum performance instead of battery, and still i have no results/cannot see ANY available networks). I have a feeling like i really have a hardware problem with wifi now..But again i think whatever it is its caused by this aplication WEFI. Does anylone have any ideas? i saw some Rafael radio ROM , maybe i can try to install that?
Thanks
AArrrggghh!
This god-awful program rears its ugly head again! I have solved the problem totally now by getting a new handset!! Now I have my Touch HD (Blackstone), one thing I WILL NOT do is install this garbage!! A quick search thru the forums here will reveal a small and very useful program which will with one click switch-on WiFi (and auto connect to the signal it finds if stored in your preferred networks) and with another click will switch WiFi off! Its called AKWifiToggle, and while no where near as fancy as WeFi, IT WORKS and DOESN'T MUCK UP YOUR PHONE!!!
I have tried using smartphonetracker, and some other gps tracking phone programs. They work great, but heres the PROBLEM:
Useless if device is in sleep mode, or if press the power OFF button.
So if it runs out of battery, or if its turned off, how can I find it by GPS?
Any solution?
sorry, if the phone is off / battery empty - no chance...
i mean, how should it work anyway?! sending a "dead" device the command to boot up and do something?
standby shouldn't be a problem for these programs or they aren't worth the money. i know that kaspersky's mobile security offers this feature. but so far i didn't buy it... (pretty certain it would mess with the system in some ways, make it laggy etc) phonecreeper here @xda should work as well.
oh, one more thing:
all these apps won't prevent a hard-reset or a reflash. in this case you could only disable the IMEI via your provider (sim-card is mandatory anyway) to make it really useless for the thief. (imei-changing is possible and apparently pretty easy, but instructions are pretty hard to find on the web... ^^)
I mean, when it is in standby mode, when u tap power off, then screen goes black.. it doesnt seem to work when its in this mode..
well, from what i've read about smartphonetracker, it SHOULD work in standby-mode. (if the phone is connected to a network to receive the sms)
if it doesn't you should ask the guy who wrote it? also you can find some support here.
caliban2 said:
well, from what i've read about smartphonetracker, it SHOULD work in standby-mode. (if the phone is connected to a network to receive the sms)
if it doesn't you should ask the guy who wrote it? also you can find some support here.
Click to expand...
Click to collapse
By connected to network, u mean internet connection? I want to track my gfs whereabouts, but she doesnt have internet connection on her phone..
Errr, you want to do what?! Oo
Well, I guess that's fine because she knows about it and does the same with your phone, right?
Since when do SMS need an internet connection?
Hi guys,
After many hours and days of searching google for a solution to this I'm still stumped.
I have a Galaxy S i9000 running Gingerbread 2.3.3 (had same problem with previous versions also) and I am trying to connect it to my Nokia 616 car kit in "hands free" mode, however, it keeps automatically connecting via "remote sim mode". I can confirm there is no way to disable rSAP (remote sim mode) through the nokia 616, nokia staff were not very helpful either.
There was an option in my old Samsung Jet (i think it was running touchwiz) bluetooth settings which allowed me to switch remote sim mode on and off. The only setting that exists on my SGS is after I connect to the nokia 616 i get the "Deactivate Remote Sim Mode?" option from the drop down bar... However, when I do so, the connection to the car kit is lost and upon reconnect it automatically connects using "Remote Sim Mode", regardless of how many times i try an "deactivate" it...
The only posts I could find about deactivating remote sim mode tell me to hit "Yes" to "Deactivate Remote Sim Mode", then to switch bluetooth off and then on. This does not solve my issue. Problem persists.
The only thing I can think of now is somehow finding perhaps a command line instruction that I can run from terminal to disable remote sim mode or even change a config file somewhere to deactivate it.
Does anybody have any idea how this can be done or maybe just give me a lead on where I can search next, I've hit a dead end with this now and im sure it can be done, somehow.
Thanks heaps for your help.
I'm sorry I cannot help you with this problem, but at least you're not the only one: I have exactly the same problem, but then with a Nokia 616 and a Galaxy S2.
I want it to connect with the normal HFP, so I do not loose the internet connectivity on my phone...
SOLVED Finally!
So after a while of searching then giving up, then contemplating ripping out my nokia 616 car kit and setting it on fire, I decided to revisit this issue and here is how I managed to disable/remove/deactivate remote sim mode or rsap... please note that I havnt really tested to see if this affects any other bluetooth functionality (i dont think it does though) so do at your own risk...
I ended up flashing my galaxy s with Darkys rom 10.2 extreme edition which gave me some nifty options of removing some stock bluetooth apps... I noticed there were a number of bluetooth related apps there, Bluetooth.apk , BluetoothOpp.apk, BluetoothPbap.apk, BluetoothTestMode.apk and the devil himself BrcmBluetoothServices.apk... at first i uninstalled them all except Bluetooth.apk, my phone starting throwing some bluetooth error which was expected, these errors disappeared after I rebooted the phone... I noticed that the 616 no longer connected using rSap (victory!), however, I was almost certain that not all of the apps i removed above would be causing the issue, and im sure that if anything having them removed would cause issues elsewhere so the process of elimination began... I reinstalled them all again, rebooted my phone, sure enough remote sim mode was back, then one by one i uninstalled, rebooted, tested, etc etc untill i came to the conclusion that the app responsible to rSap was in fact BrcmBluetoothServices.apk, after uninstalling it and rebooting Hands Free mode works a treat, I still get a "download error" when i try to download my contacts to the 616 but Im not to fussed about it, at least i can still use all the functionality of my phone in my car now, internet etc etc... as mentioned earlier I dont know if this will have any effect on the other uses for bluetooth so do be careful, not a huge issue because it can be easily reinstalled if nessecary using DarkysRom Tool...
Now I am sure this can be done on a stock firmware, you would most definitely need to root the phone and then find some sort of system app manager to hunt down BrcmBluetoothServices.apk and remove it...
Thats it! If anybody can work out how to successfully download contacts to the nokia 616 please post it here or pm me.
Ive been searching around for an answer to this, but have yet to find anything. Here is the scenario:
I recently got a Galaxy S 2 and wanted to use my Galaxy S as a Wifi Only Media Device. Something to leave in my car for Navigation, Music, etc. I recently installed the Galnet Chameleon ROM (but get similar results from other ROMs). The ROM works perfect the device works perfect, my issue is more of an annoyance than anything else.
I do not have a SIM Card in the device and therefore get hit up with a bunch of Notifications (ie No Sim Card Icon, (No Service) across the banner, etc). I figured out that if I put it into Airplane mode some go away but the (No Service) remains, aside from the fact that I now have an airplane Icon... haha.
Anyone know if there is an app, or method to remove these notifications (I dont need to be reminded that there is (No Service), or no SIM Card). Im pretty sure I can figure out how to remove the notification bar entirely, but would prefer to keep it.
Anyone got any suggestions?
Thanks,
I was wondering the exact same thing. Only I'm using MIUI 1.9.30.
Will this work? http://forum.xda-developers.com/showthread.php?t=1218876
Or does that only work for Carrier name?
using Extended Settings removed it for me. They just release them for 1.9.30.
http://www.magicmonkeystudios.com/android/andythomson/1.10.8/Extended_Settings/
Ok guys, as i'm browsing, I keep seeing the same questions over and over gain in different threads talking about Google Wallet. I want to put everything out here in one thread. Keep in mind i'm in the US, I know our foreign friends will be different as Google is still working on getting it working outside the US. So this guide is for you US peeps.
1.) Yes, GW works fine on rooted devices. A banner will show that your device is unsupported, and a warning may appear during checkout...ignore this. The app still works just fine. The reason it says "Unsupported Device" is because when you are rooted, there is a security risk for GW (just like there's one for you device as a whole).
2.) GW will not appear on the Play Store from your device. However, if you go to the Play Store on your computer, it will be there.
3.) You have heard there was an update that allowed you add all major credit cards, but you can't see how to update it. You have two options:
~a.) My most recommended option. Go to the Play website using your computer. Click on 'My Android Apps'. Choose the Asus Nexus 7. Scroll through the installed apps until you find "Wallet." Click it. Click on 'INSTALLED' and it will offer to send the update to you. Send it to your N7, you may need to be on wi-fi, I'm not sure about that. Now you'll have the other options for credit cards.
~b.) IF IF IF IF IF and ONLY IF the first option does not work, you can use the hacked apk found here. Just follow the instructions. Now if you are outside of the US, there are instructions in that thread for getting GW to work outside of the US. If you have issues, post them there so the developer can work on it. It is his apk, so he needs to know of issues, not me.
4.) You have added your credit/debit card. When you use GW, it will actually use your virtual master card that goes through Google, which will then debit from your actual card. What does this mean? It means that if you get any kind of rewards for using your card at certain places, you may not get those rewards or only part of them, as your billing statement will show that it was a Google purchase.
5.) No. You do NOT have to have a data or internet connection to use GW.
So there you have it. And just point out the most frequently asked questions: no data/internet required, works on rooted devices regardless of the warnings you see, only shows up in the Play Store on your computer browser. There, those have been repeated twice, so you should not be asking anymore
That's awesome. I'd added a card online, deleted an old one, but the damned app on my N7 just showed a Citi card, and no option to update. I felt retarded... I'm glad this is finally set up. Thanks.
My N7 is rooted. I've installed the latest wallet and I've entered one of my credit cards. When I did that I got an email from google stating that my wallet was set up and ready to go. To test it I should open wallet and tap my card to authorize its use. It doesn't matter how much I tap, touch, or rub the card on the N7 it doesn't appear that it is reading my card.
Is it working properly? I'd kinda like to test it out before I actually take it in someplace and try to use it.
ba_hamilton said:
My N7 is rooted. I've installed the latest wallet and I've entered one of my credit cards. When I did that I got an email from google stating that my wallet was set up and ready to go. To test it I should open wallet and tap my card to authorize its use. It doesn't matter how much I tap, touch, or rub the card on the N7 it doesn't appear that it is reading my card.
Is it working properly? I'd kinda like to test it out before I actually take it in someplace and try to use it.
Click to expand...
Click to collapse
Is your card a paypass card? Never seen it ask to tap the card to the phone. Not sure why it would, frankly.
I was about to say the same thing. You can't tap just any ole card. Doesn't work that way. The card needs to have an RFID chip in it, or some sort of NFC chip. Someone correct me if i'm wrong.
Installed yesterday from the link that was posted and this is what I get.
Thoughts?
Sent from my Nexus 7 using Tapatalk 2
I am not rooted and I tried it at a Walgreens, but it didn't do anything. Can someone explain in elementary steps how it actually works when using it at a store? I just figured I had to have a data connection and that is why it didn't work, but this guide says otherwise.
Thanks for your help!
First, download the PayPass locator to find which stores near you actually have a console that is compatible with the device. Some Walgreens DO NOT have the mastercard paypass system. They have some other kind of technology. I tried at a walgreens by my place and felt foolish when the girl just looked at me weird.
You can use this at ALL McDonald's. Go there and order something. Turn your device on. Make sure NFC is enabled in the settings. You don't need to have wallet open already, but it would speed up the process. If you don't have it open, but with the phone screen turned on, rest the back of the device to the paypass surface. They need to be physically touching. You may need to move the device around just a bit. You will hear a ringing noise, and then google wallet will be active. It will ask you to type in your PIN and the press the device to the surface to complete the transaction. Sometimes you have to tell the person at the cash register that you are paying with credit. Once you tap it a second time to the surface of the paypass thing, it will say transaction complete.
NOW, sometimes it doesn't work 100% flawlessly. SOMETIMES you have to tap the device to the pad over and over again. Or move it around on top of the pad until it goes through. And sometimes, even tho it goes through on the end of the cash register, the device still tells you that the transaction may not have gone through. If the person smiles at you and gives you your receipt, it went through just fine. But the device will ask you to tap the paypass pad again. Just take the receipt and wink at the person if they are cute because they have never seen it before and they are probably blown away by it.
Oh, and even though people say that you don't need a data connection to use it, I have always been connected via wifi to my phone or the wifi at the restaurant when I use it.
One more question, I am getting annoyed by the "you need flash blah blah blah", so I am going to root.
In the past I thought I saw articles saying something about resetting google wallet before you root or it messes it up, but when I go into Wallet to reset it - I don't see that option.
Is this something that is still required? If so, what are the steps?
I was under the impression that you don't need a wi-fi connection to complete a transaction at a PayPass terminal. Has anyone used it successfully knowing there was no wi-fi connection?
Heaterz16 said:
One more question, I am getting annoyed by the "you need flash blah blah blah", so I am going to root.
In the past I thought I saw articles saying something about resetting google wallet before you root or it messes it up, but when I go into Wallet to reset it - I don't see that option.
Is this something that is still required? If so, what are the steps?
Click to expand...
Click to collapse
From Google wallet, go into the menu from the google wallet home screen. The three dots up in the right hand corner. Then settings. Then reset google wallet.
You do not need a wifi / data connection ! How many times does this need to be stated?!
Groid said:
I was under the impression that you don't need a wi-fi connection to complete a transaction at a PayPass terminal. Has anyone used it successfully knowing there was no wi-fi connection?
Click to expand...
Click to collapse
.....................really dude? Did you read the whole thing? I even said it twice. Let me quote myself:
5.) No. You do NOT have to have a data or internet connection to use GW.
So there you have it. And just to point out the most frequently asked questions: no data/internet required, works on rooted devices regardless of the warnings you see, only shows up in the Play Store on your computer browser. There, those have been repeated twice, so you should not be asking anymore
Click to expand...
Click to collapse
See? I put it in there twice. I'm not trying to be a jerk, I just have little patience for people who don't read and ask questions that were already answered. Hope the bluntness gets the point across so this doesn't happen in the future, that's all.
adamhlj said:
From Google wallet, go into the menu from the google wallet home screen. The three dots up in the right hand corner. Then settings. Then reset google wallet.
Click to expand...
Click to collapse
I can't believe I didn't see that until now, I tried that about 4 times using the menu button but it never had the settings option....before I realized I was within a card which didn't have that option. I had to hit the back button twice to get to the "homepage" of the app, then I saw the settings, reset option...
Thanks!
Thanks OP. Your method of updating the app worked flawlessly for me. Now I added another card. Can't wait to try this out.
Quick question: lets say I get a galaxy S3, it has Google wallet on it or I install it(I believe that device has nfc also, all I would have to do is sign in and data transfer KR copies to new device? Or will I have to set THST device up all over again ?
Here's an odd question:
Let's say you're at the end of your funds on your debit card, and you don't want to charge the whole amount on your (different)credit card. Is there a way to use Google Wallet to pay out the last of the debit card's funds, THEN cover the balance of the purchase with the credit card?
matrix0886 said:
~b.) IF IF IF IF IF and ONLY IF the first option does not work, you can use the hacked apk found here. Just follow the instructions. Now if you are outside of the US, there are instructions in that thread for getting GW to work outside of the US. If you have issues, post them there so the developer can work on it. It is his apk, so he needs to know of issues, not me.
Click to expand...
Click to collapse
I'm running Team EOS Rom build 19.
Nothing else would work for me, so I did this method.
I have tried installing it by just tapping the apk and I have also put the apk in /system/apps and set permissions. No matter how I do it, I always get this.
Any thoughts?
I can verify that this works when rooted on the stock ROM AND WITHOUT INTERNET CONNECTION. When I have used it on my Nexus 7, I have had the app open as it will ask you to put in your PIN number on the device.
Few things to make sure you have done before scanning. Make sure you have a card selected before hand WHICH DOES REQUIRE INTERNET CONNECTION. I have tried to scan my Nexus 7 and Galaxy S III without a card selected (although I'm not sure why the card was deselected) and neither would work.
When you scan the device at the NFC point of sale, make sure you center the "U" in "Nexus" on the back of your device over the scanning area (this is according to the instruction manual on the device). You can test this for yourself if you have another NFC capable device, using Android Beam. You will find that the scanning range of the NFC is very specific on both devices.
Sometimes, it will take a little bit of time for the device to be scanned and for the transaction to be completed. You will hear a sound from your device indicating that the NFC has been scanned, after which the Google Wallet app will pop up prompting you to put in your PIN or that the transaction has been completed, showing you a receipt.
matrix0886 said:
.....................really dude? Did you read the whole thing? I even said it twice. Let me quote myself:
See? I put it in there twice. I'm not trying to be a jerk, I just have little patience for people who don't read and ask questions that were already answered. Hope the bluntness gets the point across so this doesn't happen in the future, that's all.
Click to expand...
Click to collapse
I read the OP entirely and thought, hooray! In post 7 someone said his didn't work and questioned the data connection. Post 8 said he was successful and stated he had a wi-fi connection with his phone at the time. No one before my post had verified wi-fi or data was not needed except the OP. Trust, but verify. I just wanted one other person to say it worked.
Just curious if there was a way to reload the virtual card without having another credit/debit card added as an available card in GW? Is there a phone number or website where we could add funds, so the virtual card is the only card listed in GW?
Sent from my Nexus 7 using Tapatalk 2