hello guys
how are u, i hope u all are doing fine
actully it's my first topic here and i need ur help and i am sure that u r gonna help me
my proplem is i tried to upgrade my i mate pda2k but mistakly i used the i mate pocket pc 2003 rom
and everything is gone
my i mate dosn't work now the only thing that i see on my screen is
serial v2.06
so pleaaaaaaaaaaase tell me what to do
and i am really apreaciate it
You should be able to remove it from the cradle,remove the battery,replace the battery ,put it back in the cradle,and run the proper rom.The upgrade should load up fine.If not,then you will probably need to put it in the bootloader mode and run the upgrade.
hi
i had installed wm 6.5 (lost in asia version 6.5) on my HD. i cant able to boot android on my phone. android will work on wm 6.5 ?. when run "haret" its goes to command screen then hanging a long time. i have to remove the battery to boot it my HD. i am using sandisk 8gb mmc. can anyone help me in this.
2255
when u start haret... winmo will be deactivated....
Yes, so it doesnt matter what version of winmo you use.
Try downloading it again and unpacking it to the Root of your memory stick (so not in any folders).
Also, try putting the touch hd in activesync mode and connect to a pc, then try to boot android.
As it is though, dont put time in to getting that version of android version as tuxhero is completely restarting the project - rewriting all of the code, so expect that work better anyway.
Qhen I put the latest version of the radio on my Blueangel i see the error messege. I see how I can pot new version of Radion on the blue angel here.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
i make step by step everything but show me error messege then I make 7th point from this link again show error messege in the program.My pocket PC now is don't show anything. When put the phone on the stand now show only USB and V2.08 under them. nothing light and nothing power on. I try to make hard reset on the phone (press restart buton and power on buton) but do nothing on the screen. I outside the battery and sim card about 10 minutes , then put again into the phone now the phone doing nothing when i try to turn on. I don't know whats happened can anybody help me?? Is my phone dead ?? ;(
now i try to make other way to put another radio but nothing work ... i am dissapointed pls help ...
ok, i understand your situation and i think your phone is not dead, but to find out and to find a way to a solution, you have to give a little more information about what happened:
-what error did you get?
-at what point exactly?
- what os are you using on your pc?
- what rom are you using on the blueangel?
- are you sure, it is a blueangel and not a harrier?
- was your battery fully charged at the point of the first upgrade attempt?
- was the sim card in the device?
- was the sd card in the device?
many people get stuck in bootloader (ok, most of them with a rom upgrade, not the radio, but anyways). until now, we got them all out of that problem and got their devices running again, but it is hard to guess from here, what went wrong, when you only describe your emotional status and not the device's
with best regards,
Chef_Tony
thanks now everythink is write ..
now if you can help me i want to put into my qtek 9090 phone new radio version and another rom with manila because it's easyly to using for me.Now can you help me to install new radio version now is 1.12 I install 6.5 rom but now i want change it with radio and new rom with manila.Now i don't have any error in the phone after flashing rom now it's ok.
I use in my PC windows 7
now in blue angel (qtek 9090) is 6.5 but don't know which version or distribution
I dont have sim card or sd card in phone wehn installing
battery is goot charged more than 90%
sorry for my don't good english if you can i want help me pls and I can't find accurate links in this forum. it's very good forum but I am not professional in flashing rom but I want make it.
for flashing with windows 7 you need to install a special driver first, you find a tutorial and the download of the driver -=here=-.
it never worked for me though (windows 7 ultimate x64) because the x64 is somehow strange. i hope this was helpful, because i didn't really understand your question
tony i need your help
Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?
pls help guys what should i do. my xda iis runs on win mo. 6.1 by dvah79 if im correct. i tried to activate the lock key and activate also the device lock and put my password. if works fine at first then after i turn off and tuern on the phone and enter my password the phone dont recognize it anymore now i cant use my phone. and also there are times my phone starts with "r" and "v" indicated "none" thus i cant use the radio and need to restart for it to be detected and work. pls help
jonrols said:
pls help guys what should i do. my xda iis runs on win mo. 6.1 by dvah79 if im correct. i tried to activate the lock key and activate also the device lock and put my password. if works fine at first then after i turn off and tuern on the phone and enter my password the phone dont recognize it anymore now i cant use my phone. and also there are times my phone starts with "r" and "v" indicated "none" thus i cant use the radio and need to restart for it to be detected and work. pls help
Click to expand...
Click to collapse
Make a HardReset with Option1:No Option2:Yes Option3:No!
This with radio is normal when you remove the Battery... After press Power put the Stick in the Reset hole (On 4 color screen) and you have not "none" on the screen!
thank sir for helping, it was succesfull, i even upgraded my ba to your win mo 6.5.3 and successfull... thanks a lot your a great help.. cheers for you.. beer coming soon...