Database Develop

JACHero guide questions

Quote:
Originally Posted by justanothercrowd View Post
CREDIT:sxfx
Ok Guys.
I created this thread cause in the JACHero thread on at least every page everyone asks how to install it, what am I doing wrong, and why is it broken.
So let me give you step by steps of what exactly I have done for me and others to run Hero with out a problem. I will also create a thread with step by step on how to use Ubuntu Linux Live distro to partition your card.
Things you will need to make this work.
Your Brain
G1 Phone
SD Card reader
And the files I included in this thread.
My phone right now is running.
JACHero 2.3
NEW SPL
cyanogens recovery 1.2
8gb class 6sd with Swapper(Swap file on ext2 sd)
setCPU slightly overclock.
Results.
Ever since I did my new Buttons, and the SPL I included in this write up, I have not had one problem flashing any hero rom at all on my phone, nor did I ever have problem actually running hero roms.
So here goes.
First before you partition your card or do anything make sure your card is at least portioned to fat32, don't worry about any other partitions yet.
OK once you do that go ahead and take the radio zip file I am including in this thread and flash it on your phone.
But first make sure you don't already have new radio installed which is 2.22.19.26I THIS IS VERY IMPORTANT. To check what radio you have, power off your phone, and power it on while holding the camera button.
If you do have new radio you can continue on to flashing the new SPL.
Flashing your SPL. (PLEASE MAKE SURE YOU HAVE THE NEW BUTTONS INSTALLED)
Ok this is where it might get a little tricky, and you might require a SD card reader I know I did and frankly I think this is the best way to do it and I recommend every time you do put a new update on your sd card to update your phone do it through a card reader.
Now after you flash your SPL you might or I should say more then likely will get stuck at the T-Mobile G1 screen, this also might happen after new radio flash in the previous step. If this is the case do not freak out it's normal and your phone is not bricked, but this is why having a sd card reader is important.
Ok so Here is what you do after you have flashed new Radio and SPL(Note:The steps on running Linux live distro and using it to partition your card is coming up). Boot up Live distro of Ubuntu, when its done booting, go ahead and go into the partitioning program while your sd card is hooked up in the computer.
Go ahead and set up two partitions at this time. One EXT3, and of course the other one Fat32. Your ext3 partition doesn't have to be all that big. I actually have mine set up to 512.
Once you are done creating partitions, go ahead and put the latest JACHero on the FAT32 portion and flash away (don't forget to rename to update.zip).
At this point if you follow all of these steps there is no way possible that your phone should not boot right into the system to run the initial setup.
These steps pretty much walk you through steps as if you were starting with a phone that has completly nothing on it.
Also the first boot up after flashing the new ROM, might take a few mins at the HTC screen.
Once your phone loads up and you go through the setup process go ahead and run swapper, it should be an APP that's already pre-installed.
Once you run swapper go into the setting and change the location of your swap file from /sdcard/swapfile.swp to /system/sd/swap.swp
Here is the reason why. The default location is your FAT32 partition. If you all of a sudden mount your phone to the computer with the swap file running on FAT32 you will corrupt your sd card, and then you will have to wipe and reinstall everything.
If you set the location of your swap file on /system/sd/ that's actually your ext2/3 partition and never gets mounted and you never have to turn swapper off.
Well I hope this helps some of you out. I will be writing the walk through on loading up live distro of Linux and partitioning your card sometime today.
I have used this method on a couple different phones and it has worked each time. Also I really recommend installing cyanogens recovery 1.2, as its an excellent way of making a back up of your phone and doing future flashing.
If there is anything anyone thinks that could be done better feel free to post in here.
Remember different people have different ways. I have posted this way cause it has worked for me on my phone and two other phones I setup, and each time there was no hicups.
FILES:
Radio 2_22_19_26I
NEW SPL
CM-Recovery-1.2
Ubuntu Linux Download
DISCLAIMER:
I am not responsible for anything that you might have done to your phone by following these directions. Like I mentioned before so far every time I have used this method, I have had nothing but success.
================================================== =============================
XDA Users, KEEP THIS THREAD ON TOPIC OR IT TOO WILL GOTO THE TRASH!!!
================================================== =============================[/CENTER]
Click to expand...
Click to collapse
Hey everyone,
I was trying to follow the guide posted after the OP (quoted above), and had a few questions that didn't seem all that clear to me. I've searched all of last night looking for answers.
-What does he mean by "PLEASE MAKE SURE YOU HAVE THE NEW BUTTONS INSTALLED", and how do I install them if I must?
-The cyanogen recovery image, is that installed just as any other rom, via update.zip, ALT+S, etc.?
-Lastly, is it really that much better if I get a Class 6 card? I currently have a regular microSD, but am willing to stick with it if the build runs fine, any other reports on this?
I'm currently at a very basic build, JFv1.51 with no other mods. Thanks in advance!

Buttons in the post refers to the Radio. Yes the CM recovery image is installed just like a ROM, alt+s. Yes it is worth it to get a class 6 sd card. I myself don't have one but I know it's worth it. Got to newegg I think you can get one there for under 20$ Hope i helped you!

[Q] Two Simple questions!

Hey Everyone, first off. I love you all. You've made me LOVE my Vibrant and NookColor more than ever!
I have two questions.. (sry my search on the site wasn't working )
1. I had a 4gb microsd card that I used to put the Autonooter for NC on it. Now I'm seeing alot of updates with froyo and overclocking kernels and I want to try them out. But my 4gb card is frozen solid at 32mb, I tried formating a through windows, I read on another post that I cant find at all that theres a better program out there for fully formatting microsd cards back to the original state.. Does anyone know the program?
2. I've been reading daily on the updates for Froyo, Which one is the current most stable version?
----
Thanks!!!
<3

1. Put the uSD card back into your NC. Under the original (BN) Settings ---> Device Info ---> SD card : first unmount the uSD card, then format it. Then remove from NC.
2. Not my thing, no help, sorry.

Thanks for the help on the SD Card! First step done, alot more to go!

Okay, So I installed Clockwork Recovery and made a backup of my system. After I installed clockwork, My nook froze at boot, I figured out how to get into clockwork recovery and I am currently restoring my eclair.
I see alot of people using froyo, which build and what post did everyone do it from? I see alot of eMMC but I see a Development build.. I'm confused as to which one I should get.
Thanks!

[Q] root/rom question

now I realize I'll prolly get the lynch mob soon after i post this... being that all the research is over in the dev section, but my question is fairly complicated and i cant seem to find a direct answer from my own reading.
now i have root on my NC and i would love to put a custom recovery/rom on my NC. could any one point me in the right direction to get me started loading a custom recovery? i dont want to run froyo off of an SD card i would love to have it just be a giant version of my phone(I'm sorry if that's asking to much)
i learned and pushed myself to do it a while back on my EVO 4g when i saw there was a rom with wimax capability's and that was my first time rooting anything. I do on the other hand work as a sprint instore service and repair tech. so all of this reading isnt completely lost on me.
and my second question. when i booted my nook back up after i let the battery die, all my setting and apps were gone. any one know anything about it?
thank you for any answer, and I'm very sorry about my spelling and grammar, i know it sucks >.<

i think my biggest confusion/hangup so far has been the custom recovery not sure if i have this right or not but. these are the steps (i think) i need to take.
1. aquire root. [check]
2.custom recovery.[?]
3.custom kernel.[?]
4. custom rom.[?]

So what you want to do is flash a custom rom? You would just download a CWM sd card image. Burn that image to your SD card. Then, grab the rom you want, such as nookie-froyo, or whatever. Copy that zip to the SD card.
Put the SD card into your nook, then reboot. It should boot into CWR and from there you can just flash the zip. The same thing with a custom kernel, just copy the zip onto your CWM sd card, reboot, and flash the zip.
I'm not sure if that is what you are asking, though.

I've actually figured it all out finally. is there any way to see what my CPU is running at?

The speed of your NC can be done by downloading 2 free apps in the market:
Linpack for Android
Quadrant Standard
The Linpack app will tell you how many MFLOPS (Millions of Floating Point Operations Per Second) and Quadrant will give you a score to benchmark for CPU, I/O, and graphics. They will also give you as a reference how you compare to other devices.

claudius753 said:
So what you want to do is flash a custom rom? You would just download a CWM sd card image. Burn that image to your SD card. Then, grab the rom you want, such as nookie-froyo, or whatever. Copy that zip to the SD card.
Put the SD card into your nook, then reboot. It should boot into CWR and from there you can just flash the zip. The same thing with a custom kernel, just copy the zip onto your CWM sd card, reboot, and flash the zip.
I'm not sure if that is what you are asking, though.
Click to expand...
Click to collapse
So I'm new to Nook. In fact it's still being shipped for the wife, lol. Little that she knows, it's getting nootered before it even gets in her hands.
I've rooted phones and flashed custom ROMs.
From what you're saying above, does CWM reside solely on the SD card? That's different than a mobile phone. So any time we need to install a custom ROM (even the first time), we'd have to boot using the SD Card that has CWM, right? Of course I'd have to root the nook first.
following should really go into a different thread:
So whats the best ROM? So many out there. I just want to be able to use all google apps and market (for kindle app).
Thanks in advance.

jackal424 said:
From what you're saying above, does CWM reside solely on the SD card? That's different than a mobile phone. So any time we need to install a custom ROM (even the first time), we'd have to boot using the SD Card that has CWM, right? Of course I'd have to root the nook first.
Click to expand...
Click to collapse
You can still install Clockwork from the market and it'll run of the NC without an SD card. I've done it. But for the installation of CM7 (something to do with EXT4? I don't even know what that means...) CWM on an SD was necessary.
On what the best ROM is. Well, looking in the general section subsection here it looks like a lot of people are on rooted stock 1.1. I tried Froyo and it was cool and all, but I missed having the full 8GB of storage on the nook. I haven't tried Honeycomb yet, so no idea on that one. I currently have CM7 nightly 8 on my NC and really like it. I may not have all the storage space still (they're working on it) but it's snappy and sleek.

[Q] Flash Rom or just Partition SD

I've finally gone to the point of rooting my CDMA Hero, finding an old copy of ROM Manager online that will run on 2.1OS, installing it and flashing ClockworkMod but now that I'm here I'm a little torn. All I want to be able to do is to save apps2SD to make use of my 16GB card but want the least chance of trouble possible as I'm still really new at this.
I noticed at the bottom of the ROM Manager screen that there is an option to partition SD to save apps2SD. Can I just do this and save myself the potential headaches of something going wrong by flashing a new ROM or do I have to flash a ROM that's at least 2.2 or higher before I can partition the SD card to save apps2SD?
Thanks for helping a rookie out.

If you flash a newer rom it includes the ability to move apps to the SD card.
Sent from my HERO200 using XDA App

winphone said:
I've finally gone to the point of rooting my CDMA Hero, finding an old copy of ROM Manager online that will run on 2.1OS, installing it and flashing ClockworkMod but now that I'm here I'm a little torn. All I want to be able to do is to save apps2SD to make use of my 16GB card but want the least chance of trouble possible as I'm still really new at this.
I noticed at the bottom of the ROM Manager screen that there is an option to partition SD to save apps2SD. Can I just do this and save myself the potential headaches of something going wrong by flashing a new ROM or do I have to flash a ROM that's at least 2.2 or higher before I can partition the SD card to save apps2SD?
Thanks for helping a rookie out.
Click to expand...
Click to collapse
yep, flash a new ROM man, id try the Zero hero 3.5, pretty snappy and pretty stable too, If you want help with it let me know, pm or something ill help you out... Later

Help, several NOOB questions

THANK YOU IN ADVANCE FOR ANY HELP! I'm dead new with android and just got a Nook HD+ 32gb (groupon deal $130)
anyway, I've done a ton of reading on here and watched a bunch of youtube vids- i don't know if people use overlapping terminology that means the same things or what.. and also seems like theres a lot of opinions in the forums.
I want basically the full android experience and root access- like i said, never used any android, but i like toying around with these things. BUT i also really want a fully stable platform- don't want constant crashing or it reseting on me.
questions i have-
1)the CWM is the "program" (don't know the correct terminology) that basically gives me the access to back up and install new roms, root, etc? TWRP does the same thing- but i understand you don't use that?
2)If i have a BRAND NEW nook HD+ do i need to back it up before messing with it OR are the "stock rom" zips you provided just that?
2) with the SD card image, do i need to put a specific image on the specified sd card. i.e. 4gb SD gets a 4gb image? or is the image universal to whatever size SD card i get?
2a) What problems am i going to run into using my mac to make the SD card, if any? what program do i need to use?
4) when you back up through CWM where does it save it? to the SD card?
4a) this is where i was confused about the image, reading into some of the posts it led me to think the image file took up the entirety of the
SD card.
4b)So in the future i could just boot from the SD card and would have the option to flash the stock rom back on the HD+ if desired? and/or
go back to CM?
5) what is DUALBOOTING? and NANDROID? how do they tie into CWM and CM10. very confused about this.
6) any disadvantage to flashing the EMMC vs booting from SD card every time? I THINK i want to flash the emmc, i don't want to be tied to booting from the SD card everytime- if I'm understanding that correctly.
7)what is this "trim" lag problem? couldn't really figure out what people were talking about.
thanks a ton for any help you can give me- I'm sure you receive a lot of questions!
-Sonny

santinod15 said:
THANK YOU IN ADVANCE FOR ANY HELP! I'm dead new with android and just got a Nook HD+ 32gb (groupon deal $130)
anyway, I've done a ton of reading on here and watched a bunch of youtube vids- i don't know if people use overlapping terminology that means the same things or what.. and also seems like theres a lot of opinions in the forums.
I want basically the full android experience and root access- like i said, never used any android, but i like toying around with these things. BUT i also really want a fully stable platform- don't want constant crashing or it reseting on me.
questions i have-
1)the CWM is the "program" (don't know the correct terminology) that basically gives me the access to back up and install new roms, root, etc? TWRP does the same thing- but i understand you don't use that?
Click to expand...
Click to collapse
CWM (ClockworkMod) is a recovery program that allows you to do just what you said. TWRP is also a recovery, but uses the touch screen instead of hardware keys to control it.
2)If i have a BRAND NEW nook HD+ do i need to back it up before messing with it OR are the "stock rom" zips you provided just that?
Click to expand...
Click to collapse
You can either use the CWM backup tool to return your device to stock (including any data you have already created, like registration) or the plain stock zips I have will also return you to stock, but the way it was when you got it new before registering.
3) with the SD card image, do i need to put a specific image on the specified sd card. i.e. 4gb SD gets a 4gb image? or is the image universal to whatever size SD card i get?
3a) What problems am i going to run into using my mac to make the SD card, if any? what program do i need to use?
Click to expand...
Click to collapse
Since you have a Mac, the best way to do it is the new procedure without burning an image. Since I don't have a Mac, I don't know the exact programs to use. I think SDFormatter comes in a Mac version. And I know there are lots of mac partitioning programs to set the first partition active. And using the procedure does use all of the SD, so it is best to use a relatively small one, 2-4GB.
4) when you back up through CWM where does it save it? to the SD card?
4a) this is where i was confused about the image, reading into some of the posts it led me to think the image file took up the entirety of the
SD card.
4b)So in the future i could just boot from the SD card and would have the option to flash the stock rom back on the HD+ if desired? and/or
go back to CM?
Click to expand...
Click to collapse
It saves it either to the SD card or internal memory, you choose.
Yes it uses all of the SD if you use the new procedure. But you need that if you choose to backup to SD. A backup takes about 1.5GB.
And yes, save the SD for future use, like restoring backups or installing new ROMs.
5) what is DUALBOOTING? and NANDROID? how do they tie into CWM and CM10. very confused about this.
Click to expand...
Click to collapse
Dual booting means having one operating system on internal memory (also called emmc for Embedded MultiMedia Card) and one installed to a bootable SD. Most people that dual boot have stock on internal and CM on SD. They are separate and independent from each other.
Nandroid just means internal memory. So a nandroid backup means backing up whatever you have on internal memory.
6) any disadvantage to flashing the EMMC vs booting from SD card every time? I THINK i want to flash the emmc, i don't want to be tied to booting from the SD card everytime- if I'm understanding that correctly.
Click to expand...
Click to collapse
The only advantage to booting to CM on SD is it leaves internal memory untouched for warranty reasons. The disadvantage is it runs slower and is less stable.
7)what is this "trim" lag problem? couldn't really figure out what people were talking about.
Click to expand...
Click to collapse
LAG is a complex issue to explain. If you are used to hard drives getting fragmented and slowing down your system, LAG is similar but a different mechanism with solid state flash drives. TRIM is a process to undo what causes LAG. But some of the solid state chips in these devices have a bug and when TRIM is run, it bricks the chip, making it unusable.
thanks a ton for any help you can give me- I'm sure you receive a lot of questions!
-Sonny
Click to expand...
Click to collapse

leapinlar said:
CWM (ClockworkMod) is a recovery program that allows you to do just what you said. TWRP is also a recovery, but uses the touch screen instead of hardware keys to control it.
You can either use the CWM backup tool to return your device to stock (including any data you have already created, like registration) or the plain stock zips I have will also return you to stock, but the way it was when you got it new before registering.
Since you have a Mac, the best way to do it is the new procedure without burning an image. Since I don't have a Mac, I don't know the exact programs to use. I think SDFormatter comes in a Mac version. And I know there are lots of mac partitioning programs to set the first partition active. And using the procedure does use all of the SD, so it is best to use a relatively small one, 2-4GB.
It saves it either to the SD card or internal memory, you choose.
Yes it uses all of the SD if you use the new procedure. But you need that if you choose to backup to SD. A backup takes about 1.5GB.
And yes, save the SD for future use, like restoring backups or installing new ROMs.
Dual booting means having one operating system on internal memory (also called emmc for Embedded MultiMedia Card) and one installed to a bootable SD. Most people that dual boot have stock on internal and CM on SD. They are separate and independent from each other.
Nandroid just means internal memory. So a nandroid backup means backing up whatever you have on internal memory.
The only advantage to booting to CM on SD is it leaves internal memory untouched for warranty reasons. The disadvantage is it runs slower and is less stable.
LAG is a complex issue to explain. If you are used to hard drives getting fragmented and slowing down your system, LAG is similar but a different mechanism with solid state flash drives. TRIM is a process to undo what causes LAG. But some of the solid state chips in these devices have a bug and when TRIM is run, it bricks the chip, making it unusable.
Click to expand...
Click to collapse
THANK YOU.. so much answered for me