Hi Experts,
I am from Singapore and i have a problem with my SGS and i hope someone here from XDA can help me.
I have been flashing and trying the firmwares here but then i encountered an issue, my SGS is not completely booting and after the samsung logo i will only receive vibrations from my phone.
What i did is, i went to the download mode and used this once click but i did not noticed that this is for CAPTIVATE ONLY!!!
Now my phone is stocked in AT&T logo, just looping back and forth.. i cant even go to DOWNLOAD mode and when i plug it in USB my phone turns off..
Please EXPERTS, need your help..
Thanks in advance
forum.xda-developers.com/showthread.php?t=819551
Try this, i have the same problem, just had the resistor come in today, now just waiting for the breakout board to arrive...
Hope this help.
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
dai123 said:
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
Click to expand...
Click to collapse
Is it possible you flashed the wrong FW? After flashing was the tab able to reboot?
Try wiping cache and do a factory reset. Volume-up+powerbutton. You will see in the middle of the screen a little triangle. Then push the volume-up button again. Then you will be in the recovery-mode. There choose wipe/cache and the wipe-data/factoryreset.
If that not helps try flashing another FW. The Rot-hammer i.e.
Fixed it!
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Question
dai123 said:
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Click to expand...
Click to collapse
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
unanony said:
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
Click to expand...
Click to collapse
please tell me what firmware you flashed...please im stuck and depending on what firmware i flash i can hear it start but still blank screen
Same black screen
I can get Odin to recognize my tab, windows 7 can see it and I can flash to it, but the screen is black all the time.
Has anyone had any luck?
What do samsung use to fix this? I've seen a repair/service program from ZTE for some of their devices that I believe was procured from an employee of ZTE. Maybe there is something like that around?
<edit>
I also flashed a rom from samfirmware, so I guess the issue is a locked bootloader from a stock rom. Anyone know how to fix this?
I too am having this issue with sawfiremware image.
i can can tell i am in download mode but i am unable to flash the EA24 firmware.
Anything that can be done?
Thank you!!
My Tab's screen won't turn on at all, even when plug-in, even that Odin said that flash was successful. But after connecting it to PC with Odin opened (Odin recognized it), loaded all files needed for flash in Odin, I pressed HOME+Volume Down + Power, the device auto-dismounted from PC, and reconnected again, I pressed start in Odin and after finishing updating firmware, the screen was working again.
Good luck to everybody! I'm happy now
what firmware did you use? thx
HELP
hello guys i have the same problem can you please help me out on how to fix it?? my screen is black and i only have the 4 white buttons up, please i need some serious assistence
Blank Screen after installing firmware same firmware
hey guys, could you lend me some help here , my tablet is samsung galaxy tab 7.0 Plus , i installed android 4.12 jelly bean , but it was 3.2 honeycomb before i upgraded to 4.12 jelly bean ,well , i'm proud of it , its smoother then the honeycomb but after a few months , my tablet suddenly just displaying a samsung logo for .... forever .. i downloaded the firmware from samsungupdate.com and i probably understand it's because the rom , i flashed the rom using Odin 3,07 with 4.12 jelly bean firmware that for indonesia region , here's the version of the firmware that i flashed to my tablet "P6200XXMD6_P6200OLBMD5_P6200XXMC3_HOME.TAR.MD5 " please note that my tablet can't open/show the recovery system , it just went black when i went to recovery system , soo i just flashed the rom again , it's because the tablet just showing samsung logo forever , never goes to window , and i flashed the rom with similar firmware but not for the indonesia region , the international one , andd after i flashed , it successfully install the same firmware ( 4.12 jelly bean ) well , it's fix the frozen samsung logo , but after it's showed the samsung logo , it just showed a blank screen of dead , the installazation is success but not fixed my tablet , well i still cant open the recovery mode, it's just showed a blank screen just like before i flashed the same firmware , PLEASE help
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
priyana said:
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
wut ?? isn't this the galaxy tab forum ... it thought i can ask a question here , but thanx anyway
Yeah. Galaxy Tab. You know, the 7" original. GT-P1000. Not at galaxy tab.
Sent from my GT-N7100 using XDA Free mobile app
Hello Everyone, I'm from Nepal. I have also same problem after few days. I search in google and YouTube also but not solve my problem. then i use my technical ideas on SM T561 tab, and I'm Shocked its open and working properly. if you also want to do that plz download Miracle Thunder 2.82 and Odin. install Miracle thunder and open, connect your Samsung tab with pc or laptop, on Miracle Thunder choose Samsung button, scan you Samsung port, model> Auto detect, mode > download, then select factory reset and click Go and wait. now your tab download mode then go to Odin and flashing your Samsung tab original firmware from website and flashing your tab. 100% its work. Thank you and sorry for my poor English.
https://www.facebook.com/softktm
Hi Guys
I need help
My galaxy tab was on froyo
I did'nt root my galaxy tab before to flash with gingerbread.
After boot its frozen (galaxy tab / samsung)
I can easily connect on pc on download mode, but i can't go on recovery mode, i can't connect to kies cause i can't go on debug mode
i been tryin to install differents versions of droid but nothing worked.
I tried roto JME but nothing work , still not booting, and still not recovery working.
Need help please if someone got this problem, pls tell me
There are many many threads about this.
This one for example: http://forum.xda-developers.com/showthread.php?t=1068039
And I am affraid you have to go to a Samsung Service Center....
Are there some errors in odin, when you try to flash a new firmware i.e. stock firmware or roto's firmware?
Halo everyone!
i need your help wherever you can.
i have a galaxy tab p1000 from MTN in south africa. last week i downloaded overcome kernel and tried to install it through CWM. i download the script to check if my bootloader was blocked, it said no. so i proceeded with the install and everything was ok. then i got a 32GB sd card and moved all my games to there.
what i never realised is that the gyro stopped working with all the games using it.
i thought maybe it was the new kernel, so i decided to restore back the original which i made a backup. after the restore finished my tab just got stuck on the screen where it shows galaxy tab. i can't go to recovery mode anymore but i can go into download mode. So i got a thread on this forum which talks about bricked tabs, i followed the steps but everytime the flashing fails. now my tab is longer detected by my laptop and i still get the same problem.
im still able to get to download mode.
Please if you get reffer me to any solutions that you have come accross, i would really appreciate it!
Thanx
Go to samfirmware.com and download the version of your firmware. Reflash that, be aware that you may need to recheck the bootloaders. Best advice I can give...
Hi. For that I can change the "csc" in my galaxy note 5 I had download a knew stock firmware. so I flash it with Odin,all is going well my phone is rebooting ?. but nothing happened: all my apps,photos.... are there. can someone help me with that plz