Hi Guys
I need help
My galaxy tab was on froyo
I did'nt root my galaxy tab before to flash with gingerbread.
After boot its frozen (galaxy tab / samsung)
I can easily connect on pc on download mode, but i can't go on recovery mode, i can't connect to kies cause i can't go on debug mode
i been tryin to install differents versions of droid but nothing worked.
I tried roto JME but nothing work , still not booting, and still not recovery working.
Need help please if someone got this problem, pls tell me
There are many many threads about this.
This one for example: http://forum.xda-developers.com/showthread.php?t=1068039
And I am affraid you have to go to a Samsung Service Center....
Are there some errors in odin, when you try to flash a new firmware i.e. stock firmware or roto's firmware?
Related
Ok guys now i have bricked Galaxy Tab.
Main problem is my customer wanted to install custom rom without rooting device. So there is no recovery mode. I flashed with odin and Heimdall but stuck at Galaxy Tab screen.
i found a solution. There is a recovery section in Heimdall. if someone tell me or send me recovery file i can test it and i will tell the last situation. If it works we will find a solution. if not ...
PS: if u have other solutions please offer me . i didnt find a suitable solution.
Thanks for reading
We would need to know what kind of tab.
it is euro tab
Can you get back into download mode (yellow android digging)? Or sometimes a phone-pc! picture? Then you can just reflash.
i can enter download mode but after re-flash system cant start. bec there is no recovery.
flashing has no relation with root... you can flash firmware on a not rooted device WITHOUT any problem.
recovery is inside the firmware you flash....I think you got some confused ideas...
i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
- exec '/system/bin/sh' failed: No such file or directory (2) -
Any ideas ?
try this it might work
hold the power off button for 10 second
to make sure it really powered off
hold down all 3 button together
see if it power up in recovery mode
www.cepdukkani.net said:
i am reflashing device it reboots and stucks at galaxy tab screen.
i checked 3 - 4 firmwares same error.
i check
adb devices
Result :
xxxxxxxxx RECOVERY
adb shell
Result :
Any ideas ?
Click to expand...
Click to collapse
You don't flash with adb. Flash with odin3 or heimdal.
man i am flashing with odin it reboots and stucks in Galaxy tab screen.
3 button combo stucks "Power Reset or Unknown Upload Mode " screen
Finally ;
Reflash with odin and heimdall :
Result Stuck at Galaxy Tab Screen. Adb result Device in Recovery.
Attempt a full flash with firmware that has recovery? MoDaCo is a good one. Doesn't sound bricked to me, sounds like your rom is not compatible with the firmware.
Are you flashing a ext4 firmware?
I got this tab stuck at the galaxy screen when I attempted a recovery to a non ext4 backup. Sounds similar.
Sent from my GT-P1000 using XDA App
i cant flash ext4 bec it stucks at %100
i re-tried it it gots FAIL at %100
This is a gsm tab, correct?
Have you tried any other kernels or roms?
Which are you currently trying to flash? Did you unlock the bootloaders?
Sounds like a revert to stock and 2nd attempt are in order.
Sent from my GT-P1000 using XDA App
i tried to flash PDA section it gave me error. i flash with PHONE section (via odin) it resets but still same error.
it is gsm euro tab. i tried original 5 firmwares
i tried Roto, JM6, Modaco, Overcome still stuck at same state...
i still think main problem is No Recovery partition in device.
If you can get it into download mode, then there is still hope...
Unfortunately, I don't have the answer...
When mine was stuck at galaxy screen, and wouldn't even go into recovery, I flashed a new kernel and all was well.
I also never used Odin, always Heimdel.
Sent from my GT-P1000 using XDA App
as i read in modaco :
after kernel update enter recovery
but no recovery after kernel update any ideas
Likely because you haven't gotten a complete flash... At least that is how you make it sound.
Are you sure you have and are following the instructions correctly?
Unlocked bootloaders and proper use of odin are the two things I would check right off the bat...
Sent from my GT-P1000 using XDA App
i am not sure that if my bootloader is unlocked or not.
i flashed with odin that is fine what else ?
Last resort I have for u
If u are able to get in download mode
Go get roto jme V4 full version
Flash it with Odin
Please read instruction for installing roto jme v4 full version
***FLASH ONLY WITH ODIN***
FOR GSM TAB ONLY
For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:
You should flash your tab and install a new firmware that's the only solution
omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...
Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App
to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..
Oké gona try it when i get home
Sent from my X10i using XDA App
jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App
thx for all the help. took me couple of hours but got it running again on andriod 2.3.3
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.
Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2
Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
I doubt you will ever get Kies to work with custom ICS rom in your tab.
priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?
who knows Samsung has catch up, then I will be caught out.
kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.
Hello,
I have installed this "ibtimes . co . uk / articles / 419836 / 20130102 / android421-jellybean-cm101-custom-rom-samsung-galaxy . htm" rom on my (actually my mom's) galaxy ace S5830 and it worked just fine. Before i installed it i made a CWM recovery backup. I wasn't happy with the rom so i wanted to go back to my last one by restoring the backup. first i wiped data and cache and then restored the backup. But now when i tried to reboot the system it got stuck on the Samsung logo and later on it was just a light blue screen. can someone help me please.
Don't worry, you need to flash a stock ROM via Odin. Look at the stickies
Sent from my pet- Megatron™
Chill your phone can be fixed easily
Simple Bro , Download the firmware files from sammobile.com then Google for Galaxy Ace Odin ..I guess the version is 4.38 or something like that ..and make sure you download the cooper file with it then flash the original firmware using Odin.So then your phone is back to how it was when you bought it.
I hope this was helpful.
If you want the instructions on how to do this ..let me know ..I'll give you the link for the files also
Help!
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Dude! Switch off the phone. Then press the 3key combo to go to Download mode. U don't need to go to recovery either (which is a 2key combo). & ops name should be:-
COOPER_v1.0.ops
Sent Via XDA™ Premium
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Hi BscorpionII!
As you can open recovery, if you don't have CWM 5.0.2.6 you could install it from your recovery and then try installing another ROM from CWM 5.0.2.6.
You could read this link
"Nielli's [GUIDE] Guides and Tips How to Root SGA, Install CWM5 and install Mods + Downloads"
In the link you'll find the last stable recovery -version 5.0.2.6- and much more.
Good luck.
I am sorry if this is not the place for this topic and for my english.
I have a samsung galaxy pocket (s5300). Once upon a time I rooted it without using odin and it worked :cyclops:
After I tried some custom roms. But in the end I used my CWM Backup file to restore my original rom. But the damn thing just doesn't wanna connect to kies any more. Now I wan't to reflash it's stock firmware with Odin and I'm using a nokia cable (i know that I should use the real thing but it isn't sold in my country + in the begining I didn't have any troble with the cable and my father flashed an android 4.0.4 on his Samsung Galaxy Nexus using this same cable). So when i put my phone in download mode and connected it gives me unkown usb device. I downloaded the drivers installed them tried again, but the damn thing just doesn't assossiet with them.
Than I showed it the proper drivers manually ( you know device menager-->update driver-->sellect driver; you get the picture) and still nothing. And i really use Kies and wan't to fix the problem. What should I do.
PLS HELP!!!
Yes!
So the phone finaly diceded to connect while in download mode and I was able to reflash it. Sorry again if I posted on the wrong place.
So i tried to root my samsung galaxy s3 i9305 4g version
then it didnt work so i tried to unlock it so i could go to 4.1.1 version thet didnt work and my phone wont boot
it only says firmware upgrade encountred an issue. Please select recovery mode in kies and try again
i really need help!!! thanks