Database Develop

looking for way to dial # on calling card

hey,
looking for a way to be able to dial a number off my contacts when using a calling card. ie, when i call the calling card, it tells me to enter the number i wish to call, so instead of having to hand dial it in there, is there a way i can just go to contacts and insert that number? seems silly that i have to write that number on a piece of paper and then hand dial it. thanks
omar

Insert a "w" into the number to have the phone stop and wait for you to press send to enter anything that follows. Insert a "p" to have the phone pause for 2 seconds and then chug along. So for your contact:
(Calling Card Co. Phone #)w(CC Access Number/PIN)#p(Contact Phone Number)#
would dial the calling card, wait until you pressed send, enter your access code/pin for the calling card followed by a pound sign, pause two seconds (so the system can do its thing), and then dial the contact number followed by a pound.
You'll obviously need to customize to match the way your particular CC works.

Is it a silly question to ask why you are using a calling card on a cellphone? Are there any plans left that don't include long distance?

I'll make my guess in two words - "International calls."

Either that or he's trying to hide those 1-900/976 calls from his gf/wife.
$2.99/min doesn't last long...

haha na guys, i'm calling international. much cheaper to use calling cards than to dial straight. i'm still at school, and i tried what you said, didnt seem to work, but i'll try it again once i get home. btw, its the type of calling card where my number is saved with them, so i call the card, and it automatically asks me for the number i wish to dial thanks
omar

Well the same dialing suggestions apply. Whatever you dial on your phone manually needs to be inputted using a 'w' for anything entered manually or a 'p' for a pause, which sounds like what you need. You can put multiple 'p''s for longer pauses like: 1234567890ppp12345 which would give you roughly a 6 second pause.

You can also try inserting commas, e.g:
18007777777,,,0119991234567

But I don't think you can tap a contact phone number and have it inserted mid-dialing stream. If the numbers you are calling will always use the calling card I would just save the calling card sequence as part of each of their numbers.

My personal recommendation is to use SunnySoft calling card and, if you are in the US calling internationally, GorillaMobile.
I'm originally from the UK and call the UK a LOT on my cellphone.
This combination makes it totally painless, just have the international contacts in the phone book as a regular contact (preceded by +44 in my case) adn just press dial. All completely seemless and Waaaaayyyy cheapper than AT&T (even reduced rate) International calling.
Just my 2c

This program could help solve the problem for you.
You can store you calling card and pin with this. Then, you can use contacts and select any phone number and you will see a "Call with calling card" on it.
I use this extensively.
Hope this helps

autosoori said:
This program could help solve the problem for you.
You can store you calling card and pin with this. Then, you can use contacts and select any phone number and you will see a "Call with calling card" on it.
I use this extensively.
Hope this helps
Click to expand...
Click to collapse
Very cool. Thanks so much for the binaries.
I think the source can be found here:
http://msdn2.microsoft.com/en-us/library/bb158783.aspx if anyone needs to tweak it. I went ahead and installed the signature (pulled a copy off the CAB in PK7 format), but I don't think it's required.
I've wrestled with it for a few days before I found a post claiming contention with the WM version of Google Maps. Sure enough, after uninstalling GMaps and and uninstalling and ReInstalling the callingCard cab, all worked well. I can live without GMaps.
Contrary to the doc, you can place symbols along with letters in your pin. Since I have to enter two pins with my card mine looks something like:
12223334567#pp1234#
That enters the first PIN (Account number) # then two pauses. Then it enters the second PIN (PIN) and #. I think reboots are required between regedits for this to work properly.
-Dan

Hello,
Thank you autosoori and Dan. I've added a very quick and dirty configuration GUI to it (its been a while since I've done any C++ programming to decided to use C# instead - apologies for the rubbishness on my part, but you will require .NET CF). The GUI is launched from the context menu in the Contacts list. Context sensitive help is provided within the app. Changed DLL so that device reboot is NOT required when registry changes are made.
I've only tested it on my Trinity running AX3L's WM6 ROM. Plan on adding support for multiple CC vendors (wife uses several calling card companies depending on destination). Apologies for the lack of clipboard support on edit controls.
Two files:
CallingCard.dll
CallingCardEdit.exe
I've wrapped them in a cab file. Alternatively, copy the two .exe's from zip to the original CallingCard's install dir; add a regstring in HLCU\Software\Microsoft\CallingCard called "ConfigApp" with the value being the full path to CallingCardEdit.exe; restart device.
Cheers

it works fine at my SX66 WM6, but only works with contact Menu than any other GUI .
hope for more functions

Changes requested
Hi,
My previous username was a bit non-random (for obvious reasons!), so I've changed it. Anyway, tell me what changes you want and I'll see if I can fit them in. If anyone wants the source, I can mail it to them.

autosoori said:
This program could help solve the problem for you.
You can store you calling card and pin with this. Then, you can use contacts and select any phone number and you will see a "Call with calling card" on it.
I use this extensively.
Hope this helps
Click to expand...
Click to collapse
I installed it and it's works fine, but today stopped work... the link appears, but I can't call with it. I tried to install it again... the same...
any idea?!

Here is a big problem I have with this CAB when used with GoogleMaps. If I install CallingCard AFTER GoogleMaps ... no Context menu for CallingCard appears in Contacts.
If I install CallingCard BEFORE GoogleMaps ... both GM and CC context menu appear, but when I select something like "Call work using calling card" it tries to use GoogleMaps instead

GREAT Application / New Features
GREAT JOB!!!
Thanks a lot !
works very well !
is there a way to use it with the call shortcuts for fast dialing ("numérotation rapide" in french) ?
it would be a very very very nice feature !!!
other options (less important, but pretty nice) :
1. ability to dial # after the "dial number"
2. in settings : ability to choose "0 secs" on each menu (pre-pin pause and pre-dial Pause)
Thanks in advance
thisisbil said:
Hi,
My previous username was a bit non-random (for obvious reasons!), so I've changed it. Anyway, tell me what changes you want and I'll see if I can fit them in. If anyone wants the source, I can mail it to them.
Click to expand...
Click to collapse

GREAT Application / New Features
I havent reviewed this app for a long time - apologies. I've moved calling card provider to one that gives me a local number for each of my international contacts - nice!
Anyway, if someone desperately needs some work on it, I will try to fit it in - let me know.
Phil82de: I noticed the problem with Google Maps. I will try to look into it.
samerweb: Again, I'll see what I can fit it. What exactly do you mean by call shortcuts? If you mean phone Quickdials, then you could save the number that is actually dialled directly as a contact. Can you clarify.
Thanks.

hi i have installed this file on my mobile, but can't find the setting. please help

WM SMS Client for VOIPBuster!

Hi all
I've created an application with which you can send SMS using the VOIP Provider VOIPBuster.com!
They offer free SMS sending for lots of countries!
It's the first beta.
You can download it here:
www.ruttensoft.com/files/WMSMSClientVOIPBuster.zip
It has no CAB yet, so just copy the exe-file to your device and start it.
Then go to Settings and enter:
Username (VOIPBuster Username)
Password (VOIPBuster password)
Phone Numbe (Registered with VOIPBuster)
Your contries Dial Code (e.g. +41 for switzerland)
The application will load all your contacts from your mobile database!
After setting the settings, chose a contact and write a message (maximum of 159 letters) and click on send (make sure you have internet coverage)
NOTE: For an unknown reason, Sometimes VOIPBuster gives back an error message, even though the message was sent!
Currently it is made for Smartphone Devices and I've implemented Portrait and Square support (e.g. s730)
Post your comments here!
Thanks
Sven
www.mobilehelp.ch
www.ruttensoft.com
www.mobiledevices.ch

wohoooooo thanks so much for realizing my request. i will try it soon
EDIT:
i was trying to send an SMS while my phone was connected to my computer using the USB cable. it didnt work!!! but now i disconnected the cable and sent the SMS via GPRS/3G. the sms arrived!!!! and it works
HOWEVER;
after SENDING the SMS i also get the error message that the message was not sent or something.
hope you can fix that problem soon, as it is important to know whether the SMS arrives or not..
thanks a lot for your effort!!!!!!!!!!!!!!

Actually if there is only a simple error, it has always been sent on my device. If there is really a problem, you will get an exact error message (no balance, number false....)
I dont know why this is, I get that "Error" back from the VOIP Server so I cant fix it I'm afraid.
But yeah... I have never gotten this error and it was not sent... so you can test it a bit and if has always been sent while this simple error appears, I will deactivate it...
For USB: It's working here... Does your internet connection work while beeing connect on usb?

yes internet available while on USB. but it doesnt matter really.. at least it works though 3G etc.
you might want to disable the error message... its very annoying and loads for ages before it comes.
the GSM VOIPBUSTER Client shows THE SAME error... thats remarkable. implies the error is from the voipbuster server.

Ok I will disable it

awesome, thanks!

hey wat kind of connection does it use to send the sms, dont have a data plan so will simple wifi connection due? dont want to get a bill of charges afterwards . thanks again we all needed something like this. should port this to the smartphone general forum as it'll help everyone . good job

i'm getting an unexpected error when i enter settings, happening to anyone else?

makaveli86, do you have the Wings?
When do you get the error, by clicking on "save"?

It takes the same connection as the Internet Explorer would do.
So if connected to WLAN it should take WLAN...

If the device you've sent the SMS to is not "on", so could not directly get the SMS (but will later if it is turned on), the VOIPBuster server is also giving back the "Error"
SO I will just deactivate that... If there is really an error, it will show the correct error

oh you created it specifically for the wings? thought it was a smartphone app in general, i have the vox was hoping it would work on any smartphone...is there anyway you could find a way to do that because i know a lot of people who were looking forward to this.

Of course... it should also run on all other devices.
But I had no time yet to test it on other devices, mainly on pocketpc I will have to test some more

ohh ok..well i'm having troubles getting into the settings menu (currently running it on a s710 htc vox) so maybe if someone else that has the vox as well can confirm this for me? or if you dumdium get the chance to run some tests and see wahts up? i'll be glad to help if you need it

anything???

i had some problems too at first
then restarted and then it was ok
it kept saying the login details were wrong or something. now it works
restartd

A.Bagatov said:
i had some problems too at first
then restarted and then it was ok
it kept saying the login details were wrong or something. now it works
restartd
Click to expand...
Click to collapse
ya just retried it, still same thign. did a few reboots nothing.
bagatov, you using the s730? how responsive do you find that phone? are you satisfied of its performance?

hey
i use s730 and i love it. but the ram could be bigger. sometimes when i read RSS news with spb insight, listen to music with TCPMP and surf the web with OPERA stuff gets closed due to lack of ram. thats very stupid. but im sure an update will fix it. it also could be faster, but i hope htc will release the drivers to unleash the full potential of the 400 mhz

Dumdidum said:
Hi all
I've created an application with which you can send SMS using the VOIP Provider VOIPBuster.com!
They offer free SMS sending for lots of countries!
It's the first beta.
You can download it here:
www.ruttensoft.com/files/WMSMSClientVOIPBuster.zip
It has no CAB yet, so just copy the exe-file to your device and start it.
Then go to Settings and enter:
Username (VOIPBuster Username)
Password (VOIPBuster password)
Phone Numbe (Registered with VOIPBuster)
Your contries Dial Code (e.g. +41 for switzerland)
The application will load all your contacts from your mobile database!
After setting the settings, chose a contact and write a message (maximum of 159 letters) and click on send (make sure you have internet coverage)
NOTE: For an unknown reason, Sometimes VOIPBuster gives back an error message, even though the message was sent!
Currently it is made for Smartphone Devices and I've implemented Portrait and Square support (e.g. s730)
Post your comments here!
Thanks
Sven
www.mobilehelp.ch
www.ruttensoft.com
www.mobiledevices.ch
Click to expand...
Click to collapse
did you post the new version of this app where the error message is removed?
thanks

i'm guessing hte program is done with?

[ROM] Jademan SuperROM v3 - CE OS 5.2.20771 (Build 20771.1.4.6)

The new SuperROM 3 adds 'Mobile Location Reporting' to the already tried and tested SuperROM Version 2.3.
This advanced feature will enable you to locate your Jade if ever lost or stolen and is built into the ROM so it even survives a hard reset. Simply send an SMS to your Jade with your secret password and it will reply with a location report.
If a new SIM card is put in the device it will send an SMS message to the pre-programmed number informing you of the new phone number and IMSI number of the new SIM.
This is a new application written especially for the Jade and is exclusive to the SuperROM. It adds no overhead to the device and is only activated when a message is received with your password and for a few seconds when your device is restarted. Written in C++, the tiny code requires no .NET framework and adds no extra size to the ROM.
I have been testing this new feature for the last four weeks and it works very well. Please leave your comments both positive and negative to allow me to refine/improve the 'Mobile Location Reporting' feature.
Full intructions are included in the README file.
http://rapidshare.com/files/223351030/JADEMAN_SuperROM_v3.0.rar
http://www.mediafire.com/file/jom5mddnzzo/JADEMAN_SuperROM_v3.0.rar

Wow that's nice jademan.... will it interfere with guardmobile which i would like to install?? it has few more options like callback etc?
and does this mobile location reporting program survive hard reset??... meaning, if the intelligent thief hard resets my phone and then insert his sim, would it work and send a sms to a predefined no?? (too much, i know )
Anyway thanks for this too
Thank god i din flash the superrom ver 2.3.. i can straightaway go to ver 3

Even though this is UK-Eng, I shouldn't worry about anything if I were to install this on USA right?

^ yeh nth to worry... jademan already answered that in the 2.3 superrom thread

Hi Jademan,
can you cook an German Version of your Super-Rom?

My first comment to the new feature in your SuperROM v.3:
Affter flashing i don't get any SMS from 'Mobile Location Reporting'.
If i send a SMS with "my-password" i get an SMS back with Carrier, CellID, LAC, MNC, MCC, RSS and "GPS failed to get a position fix." (no GPS in the house )
This tool looks to be very good, but if the 'Mobile Location Reporting' does not working on SIM-Card changing it's only half so good...

Dark Angel [gEb] said:
My first comment to the new feature in your SuperROM v.3:
Affter flashing i don't get any SMS from 'Mobile Location Reporting'.
If i send a SMS with "my-password" i get an SMS back with Carrier, CellID, LAC, MNC, MCC, RSS and "GPS failed to get a position fix." (no GPS in the house )
This tool looks to be very good, but if the 'Mobile Location Reporting' does not working on SIM-Card changing it's only half so good...
Click to expand...
Click to collapse
Thanks for the comment.
Even with just the CellID you may get an idea where it is (http://www.opencellid.org/). Google Maps uses this info to find you when it can't use a GPS fix. I can usually get a fix indoors but it can take a while, the default timeout is 5 mins but you can try PASSWORD:30 to give it 30 mins to get a fix.
The SIM change reporting should work, did you tick the box and enter the phone number you want the reports sent to in international format?

Jademan said:
The SIM change reporting should work, did you tick the box and enter the phone number you want the reports sent to in international format?
Click to expand...
Click to collapse
Thanks for the Answer.
Yes, i did it. On SMS from other Phone i get answer, but i missed the first SMS after flashig to your ROM.

Raghav_K said:
Wow that's nice jademan.... will it interfere with guardmobile which i would like to install?? it has few more options like callback etc?
and does this mobile location reporting program survive hard reset??... meaning, if the intelligent thief hard resets my phone and then insert his sim, would it work and send a sms to a predefined no?? (too much, i know )
Anyway thanks for this too
Thank god i din flash the superrom ver 2.3.. i can straightaway go to ver 3
Click to expand...
Click to collapse
Not sure about Guardmobile but they should work together, although Gaurdmobile won't survive a hard reset. If you want more features in 'Mobile Location Reporting' then ask here and I'll consider adding them.
Yes it does survive a hard reset as it's built into the ROM but the SIM reporting feature needs testing more. Please try it and leave your comments.

Dark Angel [gEb] said:
Thanks for the Answer.
Yes, i did it. On SMS from other Phone i get answer, but i missed the first SMS after flashig to your ROM.
Click to expand...
Click to collapse
Look in your Windows folder for a program called simon.exe, double click it and it should send a SIM change report to the pre-programmed number. It should only do this if it hasn't sent one already. Can you check this please?

Jademan said:
Can you check this please?
Click to expand...
Click to collapse
One moment please, i must flash your rom to my jade, because i need the german version and have reflashed chanevs rom affter the first Test with your SuperROM.

Jademan said:
Yes it does survive a hard reset as it's built into the ROM but the SIM reporting feature needs testing more. Please try it and leave your comments.
Click to expand...
Click to collapse
Cool.. will try for sure am flashing oly aftr 2 days oly cos am gonna be busy for 2 days.. will report as soon as i test

O.K. :
1. Image flashed. No SMS on my second Phone.
2. SMS with Password to my Jade, after many minutes i got an answer with all data (gps data too).
3. On Jade "run" the \Windows\simon.exe: Nothing. No SMS to pre-programed number.

Dark Angel [gEb] said:
O.K. :
1. Image flashed. No SMS on my second Phone.
2. SMS with Password to my Jade, after many minutes i got an answer with all data (gps data too).
3. On Jade "run" the \Windows\simon.exe: Nothing. No SMS to pre-programed number.
Click to expand...
Click to collapse
Thanks, I have a German SuperROM on my device right now, will upload tonight
Can you send me two files, _sim.bin and __sim.bin from your windows folder? I'll PM you with my email.

Dear Mr Jademan... Is This Jademan SuperROM V3 Works On Asia Device ?

^ it does

Hello,
I installed the firmware to my Jade, no SMS was sent to the predefined phone nr, the format was the right one, international (+4...)
I sent from the phone (with the predefined phone nr. saved in jade's firmware) a SMS with the password to my phone but there was no SMS sent back to the other phone.
Do I need to check anything to make this function work?
thanks!

ccris said:
Hello,
I installed the firmware to my Jade, no SMS was sent to the predefined phone nr, the format was the right one, international (+4...)
I sent from the phone (with the predefined phone nr. saved in jade's firmware) a SMS with the password to my phone but there was no SMS sent back to the other phone.
Do I need to check anything to make this function work?
thanks!
Click to expand...
Click to collapse
Can you send an SMS from Jade, i.e. you have credit, etc.?
The password is case sensitive, i.e. abcde != Abcde and nothing after the password?
Did your Jade receive the SMS?
The SMS can be sent from any phone and reply goes to the phone that sent it. Pre-programmed number is only for notication of SIM changes.

net 3.5??
hey jademan, why don't you put net3.5 in to your perfectRom??? it would be great if you do so.

You are genius! Thanks for the tool.

phone not sending CID

Hi Group.
Just got a touch diamond, my first smart phone so bear with me,I have a question,how do I find where to change
control over sending out my own number or not ,
TYIA

start-settings-phone-services-caller ID-Get Settings.
You will be prompted for your choice of 3 options:
everyone
noboby
only to contacts

Well That was fast.Thank you so much,Now while you are there,I also have found that if I receive a text from someone not in my contact list,The only way I seem to be able to add them to my contact list is to dial their number and hang up quick, and then I have the option to add it,I bet you know better
Later

highspark said:
Well That was fast.Thank you so much,Now while you are there,I also have found that if I receive a text from someone not in my contact list,The only way I seem to be able to add them to my contact list is to dial their number and hang up quick, and then I have the option to add it,I bet you know better
Later
Click to expand...
Click to collapse
Not entirely sure of the exact details but if you open the txt message and press and hold on the number you should get an option to save that number to contacts.

Hi
Well thanks again,I am sure I did that, which is what made it start to dial, will try it next time to see if it was finger trouble my end
Tis a nice handset,I am fine with windows,just need to get to know the touch screen system better,
Many thanks for your help,seems I have a lot of reading ahead
Later

[Q] MMS issue on Darky's 9.4

Hi! I'm on darky's 9.4 and i can't send mms.. i don't know why it is like this but do anyone of you know a fix for it? =) thanks!

Check your mobile carriers APN values. Then go into your phones settings.
Wireless & network>Mobile networks>Access Point Names.
Make sure all the values are correct.

Where can I find those values?

Who is your mobile carrier? What region? Where's your google skills?
I'll see what I can find, I just need the info.

cheers for being so awesome
Mobile carrier is Telenor in sweden

http://www.phoneontherun.com/carriers_en.php?v_pais=59
Select your region and network, and make sure those values are correct.

I did that but still, it just keep saying ''Sending'' and nothing happens :/

When you went in to the Access Point Names section of the phone, did you adjust the values in both sections? There is an Internet section, and an MMS section.
If that doesn't solve your issue I have no idea what it could be. Might be a rom issue. If you still can't get it working, maybe ask someone in Darky's thread in the development section.

I did it on both.. :/ I'm realy greatfull that you tried. You're great!

I'm sorry I couldn't help you out with your problem, and you are welcome.
If I can think of anything else it could be, I'll post it here.

Thank's alot

I think I may have found something...
Dial this code into your dialer.
*#1234#
What does it say next to CSC?

thanks alot

sorry bout the wierd second ''thanks alot'' reply.. i didn't notice that a second comment tab opened up.. anyway it says : I9000OXXJS1

Hey, no worries weirdo
We're going to try something.
I need you to go to Settings>About Phone>Status. Write down your imei number.
Then in your dialer, dial this code. *#272*imei#* (your number goes where imei is)
Tell me what 3 letter code is selected for your phone. Do not touch anything yet. To leave that menu just back out with the back button.

it says XEN