Database Develop

Need GT Rogers stock Rom

Hi,
I'm looking for galaxy tab stock ROM from Rogers (UXJJ6) please
I want to try to revert to original FW because my tab is stuck at samsung galaxy screen for more than 2 weeks now. All the ROMs i flashed have failed ( for example ROTO JMI, JME or jmk,jj4, jk5 etc) Odin or Heimdall say "pass" but the tab always reboots to the samsung logo and stays there.
Thanks in advance for any help you could provide
Sent from my GT-I9000 using XDA App

Search its in the forum i posted it.
Sent from my GT-P1000

crisvillani said:
Search its in the forum i posted it.
Sent from my GT-P1000
Click to expand...
Click to collapse
Hi Crisvillani,
2 weeks ago I tried the Rogers FW that you posted on march 12. I flashed with heimdall all what was inside by putting each file in their correspondant box. The status bar goes 100% but the tab doesn't reboot.
There is a Pit file that i was not able to use because the box is always greyed out and when I check the repartition, the start button becomes greyed out too.
I was wondering if the ROM is complete or should I flash specific files in some specific order.
Please advice as my tab is still stuck at samsung logo screen.
Thanks in advance

Hey i'm not exactly sure what you have to flash but before you got stuck in a bootloop what firmware were you one and were you converted to ext4?
If so try repartitioning with the .pit file in the folder , then with heimendal flash the factoryfs.rfs and cache.rfs and dont wrry about the rest.
Im pretty sure that should work!

Dude this is the development forum not general discussion or questions forum. This sections is for posting of dev projects, tutorials or reference only.
Use the search function to find what you are looking for.

Crisvillani,
Thanks for the hint. I'll try that out again and see if it works.
TheATHEiST,
Sorry for posting in the wrong section of the forum. I guess I was so desesperate I didn't pay attention.
A+
Sent from my GT-I9000 using XDA App

tupo05 said:
Hi,
I'm looking for galaxy tab stock ROM from Rogers (UXJJ6) please
I want to try to revert to original FW because my tab is stuck at samsung galaxy screen for more than 2 weeks now. All the ROMs i flashed have failed ( for example ROTO JMI, JME or jmk,jj4, jk5 etc) Odin or Heimdall say "pass" but the tab always reboots to the samsung logo and stays there.
Thanks in advance for any help you could provide
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
My guess would be that the ROM you were most recently using has converted your partitions from RFS to another format. Stock ROMs will not work with these other formats.
As such you need to repartition your device. At the moment the start button is greyed out when you select repartition because you have not provided all the necessary files. Once you've put a file in every slot (except recovery) then you will be able to flash. If you're unsure and want to put a file in recovery just select the same file you chose as the kernel/zImage.

[Q] How to return to stock?

I have not flashed a ROM yet, but when I do how would I go back to stock? I made a CWM backup of being stock rooted, but I want to know of another way to go back. When I had the AT&T Galaxy S2, all I had to do was flash the tar file in Odin. I searched the development section and only found modified KJ4(2.3.5) and KKA(2.3.6) ROMs. I have the Polish Note if that matters.
Edit: I think I may have found the right way to go back to stock KKA. Just by placing the stock zimage using Chanfires method ^_^
Edit2: Meh figured it out
Sent from my GT-N7000 using xda premium
Edit3: Need confirmation on correct way to return to stock, as others have the same question.

Get the stock rom and reflash it.

ericyang said:
Get the stock rom and reflash it.
Click to expand...
Click to collapse
Yeah I definitely know that part, I'm more concerned about the way of doing it.
I heard that flashing through Odin would cause the yellow triangle as it would set off the flash counter... Can please you link me to the stock ROM that is flashable through Odin if this isn't the case? OR an alternative method besides the one I posted above.

I do in fact have tha same questions. I even went off topic in a ROM release thread about it.
I'm a longtime HTC user and with long time i mean since like 2002ish. I have no fear to mess around with HTC stuff since I know my way around and know exactly how to brick it, if I really want to ;-)
Things look different with the Note thought. The recovery doesnt stick but is kernel dependant, Odin seems to be similar to HBOOT but shouldn't be used since it tells Sammy what one did to its device. Flashing can be done by this that or another way, it all looks so weird and chaotic to a HTC camper... lol.
Sent from my GT-N7000

schaggo said:
I do in fact have tha same questions. I even went off topic in a ROM release thread about it.
I'm a longtime HTC user and with long time i mean since like 2002ish. I have no fear to mess around with HTC stuff since I know my way around and know exactly how to brick it, if I really want to ;-)
Things look different with the Note thought. The recovery doesnt stick but is kernel dependant, Odin seems to be similar to HBOOT but shouldn't be used since it tells Sammy what one did to its device. Flashing can be done by this that or another way, it all looks so weird and chaotic to a HTC camper... lol.
Sent from my GT-N7000
Click to expand...
Click to collapse
Hopefully we can get some clarification on the right method.
Sent from my GT-N7000 using xda premium

Goodm7sn said:
Cheers guys for the great info .
ive been following this thread for a while now , and i would like to suggest to the experts , if possible , to make a full step by step guide for how to revert to stock (including the whole stock kernel re-flashing process for different note models) bcos to be honest , i think many of us have this same question and are hesitated as the whole process sounds confusing.
i could be one of them as this is my first samsung device , coming from HTC Desire HD ,where flashing and development for samsung devices (as far as i know) is quite different from that on HTC devices.
Thank you again for the efforts , would be highly appreciated to get that guide post up.
Click to expand...
Click to collapse
dr.ketan said:
will post it soon
Click to expand...
Click to collapse
i think this thing is being worked on , all above is from this thread http://forum.xda-developers.com/showthread.php?t=1329360

Goodm7sn said:
i think this thing is being worked on , all above is from this thread http://forum.xda-developers.com/showthread.php?t=1329360
Click to expand...
Click to collapse
Yeah he did update it. That's where I got the idea about just using Chainfire's Initial Root Flasher and placing the zImage in that folder. On the bottom of the OP, he put
Now How I can revert back to Stock ROM/Unroot (In case of replacemet may i need)
I you have Just rooted only but not added CWM - Just Download this Extract - Execute - Rum Me unroot.bat
If You have Root + CWM - then first find out original stock kernel (zImage file)
Now place this file in zImage folder, n repeat procedure(Initial CFRoot Flasher), which you have done at time of pushing CWM by selecting I am rooted already
Now unroot with above said unrooting tool.

HTC Chris said:
Yeah he did update it. That's where I got the idea about just using Chainfire's Initial Root Flasher and placing the zImage in that folder. On the bottom of the OP, he put
Now How I can revert back to Stock ROM/Unroot (In case of replacemet may i need)
I you have Just rooted only but not added CWM - Just Download this Extract - Execute - Rum Me unroot.bat
If You have Root + CWM - then first find out original stock kernel (zImage file)
Now place this file in zImage folder, n repeat procedure(Initial CFRoot Flasher), which you have done at time of pushing CWM by selecting I am rooted already
Now unroot with above said unrooting tool.
Click to expand...
Click to collapse
i have afew questions about that ,
where and how can i find the specific zimage for my device ? i understood that its in a compressed file extracted with 7-zip , but how can i get that compressed file ?
also , what if i had another type of ROM installed (NON stock) , how can i flash the original stock rom back (since i will not be be rooted, wont be able to restore NAND backups)??!
in HTC devices (i had Desire HD) , reverting to stock rom is simplified by flashing the "RUU" files , which were found in a dedicated thread.
This whole samsung diferences is really confusing me
thanks alot for any help.
cheers.

Goodm7sn said:
i have afew questions about that ,
where and how can i find the specific zimage for my device ? i understood that its in a compressed file extracted with 7-zip , but how can i get that compressed file ?
also , what if i had another type of ROM installed (NON stock) , how can i flash the original stock rom back (since i will not be be rooted, wont be able to restore NAND backups)??!
in HTC devices (i had Desire HD) , reverting to stock rom is simplified by flashing the "RUU" files , which were found in a dedicated thread.
This whole samsung diferences is really confusing me
thanks alot for any help.
cheers.
Click to expand...
Click to collapse
This is my ass-umption as I am still waiting for other responses as well.
In order to revert to stock you have to download the Initial Flasher.zip from Chainfire.
Then download your Kernel from the first page. http://forum.xda-developers.com/showthread.php?t=1331784 The zImage is taken from extracting your Kernel, whether it be KK1, KJ4, KKA, etc...
You place that zImage in the files folder and click "already-rooted.bat" *if you are coming from another ROM.*
Once that is done, you run the unrooting tool from Doomlord.

This method may work if you are able to access your device. As in your Android OS is up and running. What about a bootloop on a ROM/Kernel without a custom recovery built in confused. How would you go on from here?
On a part-bricked or bootlooping or otherwise fukkered HTC I would fire up my (bien sure as first thing) flashed ENG HBOOT, put it in FASTBOOT mode and simply a) fastboot boot c:\path\to\file\recovery.img or b) fastboot flash recovery c:\path\to\file\recovery.img and done. No brick from here, bc I a) always can restore a nandroid from here or b) always have a ROM ready on the SD or I could put it there using the mount usb option in the recovery, or heck, even by ADB PUSH. But on a Samsung...

[Q] Verizon Tab 2.3.5 rooted, need cwm for ICM

I've read several threads over the last few days and I'm a little confused. I want to make sure I'm on the right track before I use the wrong recovery files.
I rooted my tab(verizon) by using heimdall and applied a stock gingerbread rom with root. now I need to get clockworkmod recovery but when I download it from the market it doesn't list the galaxy tab as a choice to flash the recovery.
I read want to know if I need to use ADB to get CWM Recovery? Is Rom Manager for Froyo only? Is there a Gingerbread version? Will the CWM apply ext4?
I need these answered so I can then move to ICM on my tab as I read that I need CWM and Ext4.
If anyone can answer me that would be a big help. I searched a lot so if I missed something very easy, I'm sorry. I read the Q&A, but I am still left with unanswered questions.
Thanks

Just hemindal miui, and it will give correct cwm
Sent from my SGH-I897 using xda premium

I used the ICS rom for jt1134 on rootzwiki there are instructions there. Sorry can't post links yet.
Edit there is also the latest CWM to flash with heimdall.

"how to root samsung galaxy tab 7 sch-i800(verizon)
I am very much tired with this for rooting but its still don't. i'll try with super one click when show "RUNNING PSNEUTER" then super oneclick says dont respond & hang . i was used another method for rooting that is z4root but dont work,at this moment what can i do. please dude bro help. root is very much need for me please please please help me and replay the answer.Thank u (sorry for poor English)

[Q] Cant root captivate

Hello, I'm trying to root my samsung captivate. I originally flashed 2.3.5 using Odin a couple weeks before the official update came out. I remember seeing reinstall packages appear in the recovery screen before then but now its gone, completely vanished and I am left with the inability to root my phone. Can anyone help me?

Download 7.0A corn kernel (Odin version, not cwm) found on the development section. Flash it using Odin under PDA slot. Then use three button combo to go recovery and install root from there.
If you don't like corn kernel, search for fugu root and follow the OP instructions.
Sent from my SGH-I897 using XDA App

^ Agreed
and fyi to the OP...search before u start a new thread, because this very subject has been threaded a bunch to say the least.

Thanks, I will give that a try in hopes that it works. NExt time I will make sure to post in pre-existing threads!

ok, I think im retarded because I cant find the kernel d/l. Do either of you have a link to where I can d/l it?

Here ya go
http://forum.xda-developers.com/showthread.php?t=1294477

Thank you so much, <3 you guys!

I need help!

I'm in no way new to Android been around since the g1 era. I basically need help with installing a rom on my T-Mobile gtab. I've had my tab for over a year and I finally decided to root it last week. The problem I'm having is trying to load a custom rom onto it. Is there another way other than Odin that can be used or can I just download the roms and go straight to cwm and flash?
FIREbreathing FLAMEshootingG2X

I have tried to do this several times in my own and my desktop will not let me extract the files that I need to do this on my own... just wanted to know if there was another way to put a from on my tab! Any help would be greatly appreciated.
FIREbreathing FLAMEshootingG2X

king870 said:
I have tried to do this several times in my own and my desktop will not let me extract the files that I need to do this on my own... just wanted to know if there was another way to put a from on my tab! Any help would be greatly appreciated.
FIREbreathing FLAMEshootingG2X
Click to expand...
Click to collapse
Yes you can install ROM from CWM, depends on which ROM you try to flash. Just find all the ROM at the Development section and choose the files with .zip. They usually are flashable from CWM.
for example, this rom is for GSM and are flashable through CWM:
http://forum.xda-developers.com/showthread.php?t=1497872
or if you are ready from ICSm you can also try this:
http://forum.xda-developers.com/showthread.php?t=1385153
Those provide .tar usually flashable with ODIN.
If you decide flashing using ODIN, you have to make sure that you connect you G-tab to Samsung Kies first before trying to use ODIN. (To make sure you have the correct Samsung Driver installed to your usb port connection).
I hope that helps. Please make a note, if you are upgrading from FROYO to Gingerbread, you probably need to flash new PIT file, and probably datadb.rfs as well. These files, I'll recommend to flash them using ODIN.
Good luck, and be careful not to soft-brick your G-Tab.

Since you have T-mobile tab like me,
I think your best bet will be going to Overcome ROM thread.
http://forum.xda-developers.com/showthread.php?t=1317384
Re-stock to Stock Safe 5 and then flash their kernel (all via Odin).
And from there you can CWM flash almost any ROM
Overcome website has broken images.
You can check this
http://forum.xda-developers.com/showpost.php?p=20974872&postcount=681

I just wanted to tell you guys thanks for the help...I'm running AOKP at the moment!
FIREbreathing FLAMEshootingG2X