So I tried updating to the newest Cyanogenmod Beta1 when it failed to boot repeatedly I went to reflash via Odin using stock JM9 with repartition 803.pit. This is what I got on Odin:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> modem.bin
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I had selected the modem and rom file that came with the samfirmware.com package.
Now phone will not even turn on, react to button presses, or show that it is charging while plugged in.. Tried taking out battery and putting it back in a few times with no luck.
This is an international version of the phone. Am I screwed? Could the battery have died while flashing or could the bootloader have been messed with?
I am panicing
Did you find a solution?
I have run into the identical issue and was wondering what your solution was?
I flashed the Vibrant firmware by accident onto my GT-i9000m and now the phone is dead, no boot screen, no logo, no reaction to any button combo.
I previously used the usb jig to get into the download mode, and when I reflashed a known to be good rom back on the phone I checked off "update bootloader" assuming the bootloader was at fault. Big mistake.
I've ordered a replacement phone from Bell, but if you have any info it would be greatly appreciated.
Thank you in advance.
Related
Same post from Odin-1 click thread:
Ok so I tried to install using odin 1.7 with the june factory from sam's firmware from here...
http://www.multiupload.com/MGEJ5CZLWC
after one-click failing on numerous occasions.
1.7 appeared to almost work but I now get a kernel failure upload mode message as it reboots after the ATT logo.
I even tried 1.3 and pretty much the same thing happens. When I use just odin-1 click i don't get the kernel failure but i get a battery image with the circle loader that stops at the 12 o'clock position.
1.7 1og
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> param.lfs
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
If I use 1-click again I always go back to ATT logo then battery indicator that stops at 12 position. So its either this or kernel error with the 1.7.
I am confused as to what my next step should be. I am also using the home-made jig on a consistent basis.
Well I seemed to have fixed the issue for now by installing I897UCJH3 package with odin 1.7...The Rom is working shotty but at least it still got me back in...who would have thought. I still need to go back to a prior ROM setting to upgrade to developer ROMs but its nice that I was able to resolve this issue for now.
I'm using JI6 2.2 firmware and my device is not rooted. I tried to restore stock firmware using I897UCJF6-final-OCD-REV0.exe but it doesn't work and ODIN shows below messages:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I can't see any error messages and it seems ODIN didn't do anything to my device. I tried it with my windows 7 PC. Could anyone help me please??
Pull ur battery out, look at the sticker there, and check what the build date is. It should be something like 10.06 or 10.07 or something like this.
I'm having a bit of trouble flashing froyo with Odin (it sucks that neither Samsung nor AT&T will just release an official build). My phone is rooted, and I have installed the proper Samsung and USB drivers. I run Odin as administrator and connect my phone via USB, putting it in download mode. When I hit "start" Odin gives me a bit of progress, but the phone simply sits there. I've tried multiple times and have had it sitting here for close to 30 minutes, stuck on the downloading screen. Any suggestions?
Here is all I get from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
sammusashi said:
I'm having a bit of trouble flashing froyo with Odin (it sucks that neither Samsung nor AT&T will just release an official build). My phone is rooted, and I have installed the proper Samsung and USB drivers. I run Odin as administrator and connect my phone via USB, putting it in download mode. When I hit "start" Odin gives me a bit of progress, but the phone simply sits there. I've tried multiple times and have had it sitting here for close to 30 minutes, stuck on the downloading screen. Any suggestions?
Here is all I get from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Don't waste your time with this, come see us over at Phoenix.
http://forum.xda-developers.com/showthread.php?t=892973
Click the link in my signature to see more.
Hi,
I know this is another of those phone bricked posts. But please help me guys..this is really getting me tensed..
I had installed Darky's 9.5 with his kernel.
I then installed Dungeon Defenders game and was trying it out when the phone hanged on me.
I had to remove the battery but since then it won't start.
I only shows me the Samsung GT-i9000 screen and I hear 'recover operation' in the background in a loop.
The recovery mode doesn't start giving the same error.
The download mode was working.
I tried to use ODIN 1.3 to flash stock DDJP6 rom.
It failed giving me
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.rfs
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Then the phone screen turned. No button would bring the download mode back.
I then tried removing the battery and getting into download mode again.
All I now see is an icon with the phone on the left and a computer on the right and an alert kind of icon in the center.
Please help!!!
Nilesh
UPDATED: I removed the battery and tried download mode again and it wen't it. I then flashed DDJP6 and everything is fine now!!
heya m8
i had that same problem 3 day's ago lol
when i had that display on my foon i freaked out lols
but you can still go to Download mode,, atleast i could..
so i think you should use a other mod jeh
YADRFMPP
jje
I was trying to install CM7 from Apex10 and ran the bootloaders and something went wrong.. phone was completely off (nothing just blank, no key combinations worked)
I went to download mode using JIG and tried to go to stock and it kept stuck at this
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
I tried many times, it just stops at this point or later.. but never succeeds..
is this totally gone?
any solution pls?
Thanks.
Try a different usb port , check if ur running odin as admin, try different odin vs. and if it's still a no go try another calbe. It's not totally gone 'till it boots up
Its just stopping at this point:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> boot.bin
<ID:0/004> cache.rfs
<ID:0/004> factoryfs.rfs
Its almost 30min..
Any more ideas...
I had the same thing happening to my phone a lil while back. I've got pass that issue by pulling the cable and the battery, restarting odin and connecting usb to the port that worked in the past (com4 in my case).
Thanks for sticking with me.. I tried another laptop and I was able to get the stock.. Now am more confident to play with this toy..with JIG in hand
Woot +1 on the JIG
Woot for unbrickable mod
Sent from my unbrickable cappy *bam*
ohh yahh me 2!!!!