Related
I try to upgrade my i-mate PDA2K (italian) with Helmi Windows Mobile 6 Profesional R0 ...
The program started, recognize my PDA:
Your device software is about to be update from :
Device CE image version : 1.12.24
Device Extended image version : 1.12.168
Device Radio image version : 1.02.00
To :
CE image version : 5.60.00
Extended image version :
Radio image version :
While the update is in progress, your device will act as though it
is outside of network coverage. So, all your calls will be diverted
to your Answer Phone, and any messages will be delivered
once the update is completed.
Please click Update to continue.
Click to expand...
Click to collapse
After then, remain stucked on:
Checking the information on your device ... Please wait ...
Please don't disconnect your device from your PC or
the power supply until the update is completed.
Click to expand...
Click to collapse
PDA is off, nothing happen... I was wait about 1/2 hour and then I take my PDA from cradle...
Nothing happen...
Now, the only thing I see is SERIAL (top of screen when out of cradle and USB when I put the PDA on cradle) and v2.06 (down to screen).
Try to reset, hard reset... nothing...
Can anyone help an moron like me ??? (I'm reaaly moron, not practice with the PDA's)
(I use Vista Business, I update Windows Media Device Center before this...)
Regards...
read wiki?
Did you follow the steps as indicated in the wiki? As you upgrade from 2003:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
See next page for Vista related issues...
Read and good luck!
Yes, I follow that steps...
The problem now is: I cannot acces my PDA, I can't revive it...
How can do that ?
Thanks...
Hi, You say:
Now, the only thing I see is SERIAL (top of screen when out of cradle and USB when I put the PDA on cradle) and v2.06 (down to screen).
Well i guess this is the bootloader, so when you connect the phone to the cradle you can upgrade??
Success
As MuratNL says: you are in bootloader. Connect the cradle (with PDA) to your PC (SERIAL changes to USB). Now execute the rom upgrade file from your PC and upgrade should begin.
If you have problems with connection and Vista read wiki (see above link) or try the upgrade from a WinXP machine...
I try this, but nothing happen.... Tonight I try with an XP Pc...
OK, I follow the guide posted by bins and everything goes OK...
(The I put an Italian ROM [ WM6 ] and run perfectly)
Thanks
Just a quick note:
i've experienced that thing so many times
that it's safe to say that:
IF the rom copying aint started yet, meaning YOU DONT SEE the % screen...
and if you've been waiting for that to appear so long...
and you're stuck at the:
Checking the information on your device ... Please wait ...
Please don't disconnect your device from your PC or
the power supply until the update is completed.
Click to expand...
Click to collapse
you can disconnect the BA to the cradle withouth harming the BA.
1. you can disconnect/takeoff the BA from the cable
2. on pc, terminate the upgrade process
(taskmanager terminate the RUU - "MaUpgradeUt_NoID.exe")
3. reconnect your BA still on "Serial/USB" screen
4. restart your RUU again...
that would work flawlessly. trust me. i can vouch for that.
unless you saw the Rom Copy % Screen...
"DONT TOUCH YOUR UNIT or YOUR PC or YOUR CABLES"
Device: HTC TyTN II
Bootloader: KAIS130
SPL-3.28.0000
CPLD-8
ROM: RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship
Problem: I tried to sync the device with my desktop (running XP Media Center edition sp3) using ActiveSync 4.5 like I normally do. However, this time the device wouldn't sync and it would just hang. I unplugged the device from USB so that I could try again. The phone immediately went into bootloader. It is currently stuck in this mode.
Steps taken:
First I called HTC tech support hotline. The rep walked me through several steps, but nothing fixed the problem. We tried soft resetting, holding down the power + camera buttons and then soft resetting, hard resetting: nothing worked. He then stated that the device's ROM probably got erased when I unplugged it from USB. He instructed me to download the official 6.1 ROM from HTCs website and then try to re-flash the phone.
I tried doing this, but I still cannot get the ROM onto the device. In bootloader, I plug the device into USB and I get an error message that the device is not recognized. I soft reset the phone and then run the RUU and it begins to flash the device. After 10 minutes, I get a message saying that the flash was successful but the phone just resets back to bootloader.
After searching through the forum and wiki, I am still at a loss as to how to proceed without instruction from an expert. I think I read something about using mtty, but I am afraid to do so on the Kaiser because I read that typing the wrong instructions could be disastrous.
I humbly request any kind Kaiser experts to help me with my problem! Thanks
sir topas said:
Device: HTC TyTN II
Bootloader: KAIS130
SPL-3.28.0000
CPLD-8
ROM: RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship
Problem: I tried to sync the device with my desktop (running XP Media Center edition sp3) using ActiveSync 4.5 like I normally do. However, this time the device wouldn't sync and it would just hang. I unplugged the device from USB so that I could try again. The phone immediately went into bootloader. It is currently stuck in this mode.
Steps taken:
First I called HTC tech support hotline. The rep walked me through several steps, but nothing fixed the problem. We tried soft resetting, holding down the power + camera buttons and then soft resetting, hard resetting: nothing worked. He then stated that the device's ROM probably got erased when I unplugged it from USB. He instructed me to download the official 6.1 ROM from HTCs website and then try to re-flash the phone.
I tried doing this, but I still cannot get the ROM onto the device. In bootloader, I plug the device into USB and I get an error message that the device is not recognized. I soft reset the phone and then run the RUU and it begins to flash the device. After 10 minutes, I get a message saying that the flash was successful but the phone just resets back to bootloader.
After searching through the forum and wiki, I am still at a loss as to how to proceed without instruction from an expert. I think I read something about using mtty, but I am afraid to do so on the Kaiser because I read that typing the wrong instructions could be disastrous.
I humbly request any kind Kaiser experts to help me with my problem! Thanks
Click to expand...
Click to collapse
I suggest getting in touch with the moderator named GSLEON3. He is probably going to be your best bet of getting back up and running. Good Luck
Ok, I can't get in touch with GSLEON3 (I'm sure he's extremely busy) and I don't want to pester him so if anyone else out there can help, I certainly appreciate it. Here is my theory for the solution based on further reading of these forums (but since I have no technical training I don't know if I am even on the right track). I'd appreciate if anyone with the proper knowledge can confirm or reject this course of action:
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
(taken from http://forum.xda-developers.com/showthread.php?t=394543&highlight=stuck+bootloader)
redbandana cautions that one must use HardSPL or risk bricking the device. However, in the post about SPL Questions it states:
"Well, at the moment this is where we are at. We are still investigating the full effects of what an SPL can do to vary the performance of an OS. For now there is a large consensus that the newer HTC 6.1 ROM SPL seems to work well for most of the newer 6.1 ROMS (stock and cooked)."
So my question is, will the stock SPL that came with the official HTC 6.1 ROM be ok to use mtty, or do I need to flash the old HardSPL?
I appreciate any advice on how to proceed, especially if I am totally wrong about how to fix this. Thanks!
sir topas said:
Ok, I can't get in touch with GSLEON3 (I'm sure he's extremely busy) and I don't want to pester him so if anyone else out there can help, I certainly appreciate it. Here is my theory for the solution based on further reading of these forums (but since I have no technical training I don't know if I am even on the right track). I'd appreciate if anyone with the proper knowledge can confirm or reject this course of action:
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
(taken from http://forum.xda-developers.com/showthread.php?t=394543&highlight=stuck+bootloader)
redbandana cautions that one must use HardSPL or risk bricking the device. However, in the post about SPL Questions it states:
"Well, at the moment this is where we are at. We are still investigating the full effects of what an SPL can do to vary the performance of an OS. For now there is a large consensus that the newer HTC 6.1 ROM SPL seems to work well for most of the newer 6.1 ROMS (stock and cooked)."
So my question is, will the stock SPL that came with the official HTC 6.1 ROM be ok to use mtty, or do I need to flash the old HardSPL?
I appreciate any advice on how to proceed, especially if I am totally wrong about how to fix this. Thanks!
Click to expand...
Click to collapse
mtty is not a toy and there are some risks of bricking involved. Anyhow, it is a tool that is used for situations similar to yours. Follow the steps that are provided. Step 3 may be different for different pc's, so just look for port 1. After you run mtty, install a version of hard spl. If you plan on installing a 6.1 rom, install a spl that is compatible with it such as, 3.28hard, 3.29, or the new 3.56. I'll be around for an hour feel free to pm me.
Sorry mate, usually takes me a day to catch up with my PM's, etc...
I can't say for sure on the 3.28 SPL as I have not disassembled it. Well, technically I did, just to prove a point that it was the same as 3.29, but I didn't document any of the commands.
The 3.28 HardSPL is NOT an MFG spl, so it definitely WON'T support some functions. I don't know what all the fuss is about SPL's. I use my own customized version, based of course on Jocky's work, but it's still a 1.1 SPL version & I never have any trouble.
For the 3.28 & .29 SPL's, I do know that if you are stuck because of an RUUNBH error, the correct sequence is:
cmd>set 16 0
cmd>task 8
Task 8 is not "format", I don't know where you got that & task 0 will freeze out MTTY.
Have you done an info 8 command?
cmd>info 8
That will tell you more about the issue.
BUT MOST IMPORTANTLY, only connect mtty to USB, not to port. You can mess other things up like external drives, etc. Ports are only when connecting to OEMSBL/Radio Boot Loader.
BTW, a screwed up USB port pin or block can cause this issue as well. Take a look at the pin block, is it perfectly straight?
Ok, here's the weird thing. I was going to try the mtty to do info 8 command, and I powered on the device (it had the SIM card and microSD card removed.) The device started up and performed a hard reset, and then loaded up! It had a ROM on it! Not the original factory ROM that was loaded (which had TomTom preloaded) but the factory ROM I downloaded from the HTC e-club that I tried to flash. I thought my issue was solved, so I put in the SIM card. However, when I turned on the device (with SIM card in) I get the bootloader screen. What the heck is going on?
GSLEON3 said:
BTW, a screwed up USB port pin or block can cause this issue as well. Take a look at the pin block, is it perfectly straight?
Click to expand...
Click to collapse
Yes, it is straight.
Hi everyone,
Thanks for trying to help me. It's all a bit too confusing for me so I just decided to bite the bullet and send it into HTC. Thanks again!
hi
i need help my wizard doesnt boot after i tried to update it to wm6
i reinstalled the clube imate room but didnt boot also
so what can i do ?
please help
Can you describe in more details?
Can your Wizard enter bootloader?
yes describe...
laogiacodai said:
Can you describe in more details?
Can your Wizard enter bootloader?
Click to expand...
Click to collapse
more details please.... does it enter to a rgb screen? striped blue green red screen?
yes
it can enter bootloader so i installed the original rom from clube i mate on it but it didnt work
and it can enter format mode but when i press send it says
format failed .
thank u
help !!!!!!!!!!!!!
plzzzzzzzzzzzzzzz
+ Que PPC said:
more details please.... does it enter to a rgb screen? striped blue green red screen?
Click to expand...
Click to collapse
yes , it does so can it work ? plzzzzz
Let me see...
khaledvic said:
yes , it does so can it work ? plzzzzz
Click to expand...
Click to collapse
Are you... G4 or G3
Maybe you have upload your wizard G3 with a rom for G4 or viceversa
If the RUU progress completes the upload, and the wizard starts... when it stucks? on the welcome screen?
If it is...? You can download the MTTY tool it seems the version 1.4 or something or .4, i dont remember exactly... conect your PDA to activesync in activesync uncheck the allow USB conections and run de mtty in an option select port usb (if it doesnt appears, you canenter bootloader and reconect your wizard...)
A blank screen appears then...write exactly I told you ok?
task 28
then it seems to work on something... then write:
task 28 55aa
it works again... without unplug your wizard... upgrade again your wizard it must to do the job.
tell me if it works please.
thank u
+ Que PPC said:
Are you... G4 or G3
Maybe you have upload your wizard G3 with a rom for G4 or viceversa
If the RUU progress completes the upload, and the wizard starts... when it stucks? on the welcome screen?
If it is...? You can download the MTTY tool it seems the version 1.4 or something or .4, i dont remember exactly... conect your PDA to activesync in activesync uncheck the allow USB conections and run de mtty in an option select port usb (if it doesnt appears, you canenter bootloader and reconect your wizard...)
A blank screen appears then...write exactly I told you ok?
task 28
then it seems to work on something... then write:
task 28 55aa
it works again... without unplug your wizard... upgrade again your wizard it must to do the job.
tell me if it works please.
Click to expand...
Click to collapse
I dont know what to say to thank you .
I'll try this .
If the RUU progress completes the upload, and the wizard starts... when it stucks? on the welcome screen?
yes on the i mate blue screen it stops .
I'll search for MTTY tool
thank you so much
YES
khaledvic said:
I dont know what to say to thank you .
I'll try this .
If the RUU progress completes the upload, and the wizard starts... when it stucks? on the welcome screen?
yes on the i mate blue screen it stops .
I'll search for MTTY tool
thank you so much
Click to expand...
Click to collapse
Yes it must to work!
Good luck!
thank you
but it didnt when i see the white screen i wrote
task 28
a message says:
"invalid command : task 28"
and for help
and the same when i wrote
task 28 55aa
i try it on tow rooms but any has worked
have i to try it on wm6 room ?
plz.....
so...
khaledvic said:
thank you
but it didnt when i see the white screen i wrote
task 28
a message says:
"invalid command : task 28"
and for help
and the same when i wrote
task 28 55aa
i try it on tow rooms but any has worked
have i to try it on wm6 room ?
plz.....
Click to expand...
Click to collapse
Lets revive facts... ok?
what did you do?
What it didnt?
So when you saw the white screen on mtty you wrote task 28
and nothing happens?
said invalid comand?
xtrange! so xtrange...
what info you've got?
ipl and spl?
in wich one rom are you?
do you have pc xp or vista? if vista... try search for mtty_vista
I download the mtty_47 not works!
downloade too the 1.0 not works...
Whats the matter?
Where does I saw 1.04?
lets foun it...
I have the same issue i remember but it was the version of mtty
plzz...
help
help
+ Que PPC said:
Lets revive facts... ok?
what did you do?
What it didnt?
So when you saw the white screen on mtty you wrote task 28
and nothing happens?
said invalid comand?
xtrange! so xtrange...
what info you've got?
ipl and spl?
in wich one rom are you?
do you have pc xp or vista? if vista... try search for mtty_vista
I download the mtty_47 not works!
downloade too the 1.0 not works...
Whats the matter?
Where does I saw 1.04?
lets foun it...
I have the same issue i remember but it was the version of mtty
Click to expand...
Click to collapse
thank you so much
first turned on the wizard
i enteres the boot loader mode
i disabled usb conection from active sync and killed its process
i opened mtty tool
and chose port usb and the other setting at default
(
note :
i tried on the mtty 0.1 and then on mtty 1.42 with the same result
)
i wrote "task 28"
the message apeared :
"invalid command :task 28
to help screen use command h or ?"
i wrote "task 28 55aa"
the message apeared :
"invalid command :task 28 55aa
to help screen use command h or ?"
i tried to write "h"
and "?" but the same message appears
the sheet was blank when i wrote "task 28"
so thing apeared before its "cmd>"
before every thing i write
i searched on the forum and found something and tried it was
"set 16 0"
it worked correctly
like this(after i opened new sheet when i unpluged my wizard and pluged it again and made a rest and entered to bootloader)
"
set 16 0
Cmd>
"
i tried also "task 8"
but the same message
"invalid command :task 8
to help screen use command h or ?"
i am running win xp sp2
now my diveice is turned off and doesnt work i think its battery has not enough power cuze i ve installed tow roms but it doesnt charge now
i dont know why the lab is off so i think it is not charging when it work again i tell you about the information ok
thank you
please visit it like my problem
http://forum.xda-developers.com/showthread.php?t=425526
Mmmmmm
khaledvic said:
please visit it like my problem
http://forum.xda-developers.com/showthread.php?t=425526
Click to expand...
Click to collapse
I have the same issue like yours men!
long time ago... a month i think, i can do this procedure but now i cant!!!!
It makes me sacared even my phone is ok! if crashes, it never works again and it will be the same problem like yours.
Im gonna make a research... i start a new thread asking troubles with mtty... yes it is mine asking about our trouble.
Try to found a wall charger just to charge batteries...
thank you so muche
i found a wall charger but the wizard doesnt reponse it doesnt turn on or charg
Great !
It charches again thank you so much .
the numbers are :
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1
the last clube imate room thank you
is it possible?
that these commands on mtty
does not work on wm5 have i to install wm6 ?
cuz your room is newer than mine
Nop
Cause the last time i try to reflash via mtty my rom was stucked on RGB screen with ROM 2.16 WM5 Tmo Original, so... why your divece can charge if it stucks on RGB on RGB dont charge! or it stucks on Splash screen the one that say the ipl info?
try to reflash an original ROM but TMOBILE search for the 2.16 and do me a favor... change your cable, last night my brother got a problem with his HTC Universal... when he starts to exchange his info by PC to PPC the pda starts to blink on and off again and again and then restarts by itself.... his USB Cables was Broken, so try other one.. all the USB-miniUSB cables are the same try with a cellphone cable.
+ Que PPC said:
Cause the last time i try to reflash via mtty my rom was stucked on RGB screen with ROM 2.16 WM5 Tmo Original, so... why your divece can charge if it stucks on RGB on RGB dont charge! or it stucks on Splash screen the one that say the ipl info?
try to reflash an original ROM but TMOBILE search for the 2.16 and do me a favor... change your cable, last night my brother got a problem with his HTC Universal... when he starts to exchange his info by PC to PPC the pda starts to blink on and off again and again and then restarts by itself.... his USB Cables was Broken, so try other one.. all the USB-miniUSB cables are the same try with a cellphone cable.
Click to expand...
Click to collapse
thank you,
my wizard stuck on the blue screen i-mate blue creen
this rom is original froum ftp.cubeimate.com the last one
and i have three usb cables and i try ech time difrent one
thank you
Hi I have a problem trying to exit from bootloader a PDA's friend, so how can I get to work the mtty?
Sometimes i gain exit with mtty of bootloader screen just kill usb conn in activesyng letthe device in bootloader an conect... select USB port click on OK button and then task 28 erase DOC Chip and then task 28 55aa ready to reflash the same rom that has the problem.
but now i try it on my device an aku3 ipl spl 3.08... on bootloader in a PC Vaio with XP home SP3and....
it say invalid comand
so the dir is CMD
NOT USB
how can i get usb on the dir?
Any body knows?
i had the mtty .01, 2.11 and 1.42 and no one works
any idea?
SADNESS!!!!!!!!!!!!!!!!!
Somebody stole my wizard last night i was waiting for the BUS and two guys atacks me with a knife, they took my Wizard and my money. Again... and in some part i saw somebody called INSANAVACA saying that when the Mtty shows CMD we can put "format" and then choose the A character or B character... one of those options is the OS the other one... Neither him knows jeje and dont remember which one to chose... it starts to clean the DOC Chip.
It maybe works... i cant test it so if anyone can do it please, answer this maybe it works and we can get out of the Splash screens and bootloader stucks.
A long time ago I did this steps but the mtty shows me USB. full charge your batt, remove your SD and SIM card... enter in bootloaders... uncheck the activesync allow USB conection and kill Wcescomm.exe in Win XP taskmanager plug your device to usb, open mtty in all the places works even in the desktop... select USB in the drop menu... a blank screen will appear hit enter if it shows USB your done then... type:
task 28 (hit enter)
--it starts tho the cleaning--- done...
task 28 55aa (it works again in the same thing)
Close the mtty dont unplug your device and reflash it with the stock rom 2.26 Tmobile if you unplug the device you can try to plug it again but in the same port... (but my device is SuperCID unlocked) then goes to the custom ROM.
Maybe the "format" can works if in blank screen shows CMD... try it and let us know what happend ok?
I use the 1.42 Version.
hey thanks for the reply on my thread.maybe we can discuss my problem here.
my wizard is stuck at 2nd splash (the one with the ipl,spl,gsm and os versions)
falshing another rom do not fix the problem. ive even downgraded to several WM5 roms like wizard love, button rom and xda-mini s launcher.
i have a g3 cid sim unlocked wizard.
then lately i noticed, after attempting another manual hard reset, it says formatting failed. so maybe i need to force reset it using a pc. but wizard service tool wont work coz it will only work when synced on the pc.
can mtty forceley reset (hard reset) my wizard? how should i do it? what are the commands? thanks
i've read a thread and read meistrinis reply where he pointed out this thread:
http://forum.xda-developers.com/showthread.php?t=276963
hope this one works for me
lets check it!
dielo said:
i've read a thread and read meistrinis reply where he pointed out this thread:
http://forum.xda-developers.com/showthread.php?t=276963
hope this one works for me
Click to expand...
Click to collapse
I have redirect to a Universal commands for mtty but i cant be for sure if all works for wizards!
So download the mtty 1.42
Unplug your MiniSD card
Put your Wizard in bootloader mode
Kill the wcescomm or put in activesync not allow usb conections
then open the mtty
in ports or conectios you will see
com1
com2
com3
IRDA
USB
More or less I dont know deppending how many ports does your pc have.
choose USB
Be sure that your batt is almost 80% a 100% will be great but with 80% is fine
After choose USB dont move anymore and click ok... or connect something like that.
A blank white screen appear....
Then hit enter if it shows USB> type exactly this:
task 28
(it will work on something like clean the DOC CHIP at the end will show again USB>)
then type exactly this:
task 28 55aa
It will work again on something and
It will prepare the DOC Chip for the OS (FORMAT)
The device stills on bootloader so close the mtty dont unplug the device and downgrade to an original ROM WM5
These are the steps if the MTTY shows USB>
Select the USB port
hit enter in white screen
If it shows CMD>
type in the white screen after the CMD>
format
It will shows you what to choose option A or OPTION B
Here is the problem... Which one we need to choose...
and reflash an original ROM.
Tell us what happends please.
I HAVE MORE COMANDS but for G4 AND WHY IT WONT SHOWS USB!!!!!
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
+ Que PPC said:
I have redirect to a Universal commands for mtty but i cant be for sure if all works for wizards!
So download the mtty 1.42
Unplug your MiniSD card
Put your Wizard in bootloader mode
Kill the wcescomm or put in activesync not allow usb conections
then open the mtty
in ports or conectios you will see
com1
com2
com3
IRDA
USB
More or less I dont know deppending how many ports does your pc have.
choose USB
Be sure that your batt is almost 80% a 100% will be great but with 80% is fine
After choose USB dont move anymore and click ok... or connect something like that.
A blank white screen appear....
Then hit enter if it shows USB> type exactly this:
task 28
(it will work on something like clean the DOC CHIP at the end will show again USB>)
then type exactly this:
task 28 55aa
It will work again on something and
It will prepare the DOC Chip for the OS (FORMAT)
The device stills on bootloader so close the mtty dont unplug the device and downgrade to an original ROM WM5
These are the steps if the MTTY shows USB>
Select the USB port
hit enter in white screen
If it shows CMD>
type in the white screen after the CMD>
format
It will shows you what to choose option A or OPTION B
Here is the problem... Which one we need to choose...
and reflash an original ROM.
Tell us what happends please.
I HAVE MORE COMANDS but for G4 AND WHY IT WONT SHOWS USB!!!!!
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
Click to expand...
Click to collapse
hey thanks, though drug_store's method worked for me and now my wizard is working and i have update 3 for my rom. still a big thanks to you for the starting point on where to look at.
Congrats Men!!!!
dielo said:
hey thanks, though drug_store's method worked for me and now my wizard is working and i have update 3 for my rom. still a big thanks to you for the starting point on where to look at.
Click to expand...
Click to collapse
Very good men!!! you're welcome.
Even if this method still hasn't been proved.
Here's a reason i'm taking Rom's out from Stickies.
So there's space for the important things like this on..
Let's face it sometimes a new thread on Bootfreezes and Bricks is more useful then an old one that people get discouraged by, because of it's length.
Made this one Sticky.
Noonski said:
Here's a reason i'm taking Rom's out from Stickies.
So there's space for the important things like this on..
Let's face it sometimes a new thread on Bootfreezes and Bricks is more useful then an old one that people get discouraged by, because of it's length.
Made this one Sticky.
Click to expand...
Click to collapse
great. you're right. thread like this should be stickied.
Wow
Stickie!!! hahaha so glad too see it thanks but.... is not prooved yet... so does anybody wants to try... damn if i had my wizard ...
It gets more renewed Attention to the most important problem.
Maybe....
You've got right!!!
I will make a deal With Tvaril to buy him his wizard but i need more info about to receive packages World wide. and the way to pay jeje...
I hope it can be truth in an easy way.
in the mtty, when i pres enter it getc CMD, when i type format it gets unavailable comand, so im still stuck on the align screen some other help
Man it sucks!!!!
But in sync screen?
Damn this is new huh!
I dont know what else can we do...
does you try to reflash again an originla ROM?
maybe ayou are in troubles cause your battery is too low...
display damage
i just find out that i damaged the lcd with the f****** glue. i was trying to glue the mask and the glue went on the LCD so i f***** up.
by the way the battery was full recharged, and everything was done like you said.
it sound very bad men!!!!!!
Does the display works? or it has issues?
maybe you can find a display.. so sorry to heard that.
Thank you!
thanks for this mate i was using mtty in vista using the compatiblity patch...
i downloaded all the 4 things who know they may be useful at some point of time for me when i need to do stuff.
Have a good day!
Regards,
Sam
good to hear it... but
why dont post the compatibility patch for all members?
come on share it here men!
I download mtty a while back, you know, just in case. Wellllllll, just in case happened yesterday. Mtty made it easy as pie and quick, too. Now, baby's fine and reflashed and happy again!
my friend has the same problem as this, his wizard g4 stuck on splashscreen when he flash love_rom using How to flash a new ROM to your Wizard... a little tutorial!. His problem was solved if he flash rom using this manual (I'm sorry for czech link, english version by Google translator)
Hi I from CZ and I have problem with my MDA III
what can I do ? please
"bootloader doesn't work and master reset too doesn't work" please help i dont know how to flash i was read much tutorials there but I not found a right tutorial please help me I dont know what i can do I form CZ and my mail is [email protected] ( kdyby nekdo z CR na to narazil tak mi prosim napiste a domluvime se na icq treba klidne kdybych to rozjel tak poslu i nejake penize nebo tak akorat mi prosim napiste co nejdriv ve stredu jdu jinak do servisu ale tam to bude stat hodne ) (this is PH20B
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Chef_Tony said:
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Click to expand...
Click to collapse
I want go to bootloader menu but is dont work I press Power +record+softt reset with stylus but it doesnot work and when I conect MDA with cabel to COM this cable in not USB and active sync not found MDA and when I start update with exe it write me not found (sorry for my english) help me please ? can you write me more detailed tutorial what can I do for flash please what I must download and what I must do anywhere dont work download and i dont know where I can download any files
EDIT : Flashing is not compatible with serial cable ? I have this cable
Code:
http://www.i-obchod.cz/product.asp?productid=6663
this is to serial port (COM) when i buy this
Code:
http://www.easydevices.co.uk/pp/PDA_Accessories/Cradles/QTEK_9090_USB_SYNC_CRADLE.html
work it with this ? or it better when I go to service and pay 800kč this is about 25 Euro or 40 dollars and when I place an order this cradle i pay for this 18£ this is about 600kč and about 7days when it send me to home and I go to service tomorow but if I Flash it I not having to go to service
hi guys!
my ba also displays this strange message after an unsuccessed update (disconnected before finished). i have tried to install the update once more but it says: error 101: connection error. because i own my ba just since 20 hours, i don't know what to do now. so maybe someone could translate it into newbie-language. one more thing: unfortunately i use vista.
thanks for your help!
tried it once more with the new windows mobile device manager but my pc does not find my ba. vista just plays a sound when i put it on the cradle. i think you are the only ones in the hole www who can help me. need your help!
use maupgradeut_noid for upgrade
both of you read wiki there are solutions to your problems
maupgradeut_noid tells me this:
don't think that it is right.
hi folks!
i have tried it a hundred times with my vista mashine and a couple of times with xp on virtualbox but nothing. 15 minutes ago i have turned on my old xp mashine, downloaded the ROM from tmobile germany and started the application. it worked for me without maupgradeut_noid. only the original rom and nothing else. so my tip: don't waste your time with vista! xp is much better for solving this problem. thanks xp!
ok, but as i see it you didn't solve a problem but avoided it, and not even in the best way. i use vista too and i am unable to re-flash my device. the general problem is that the identifier of the device change over the flashing process, so vista downloads new drivers and cuts the connection. as i understand it, there is hardly any way to avoid that.
of course you do't need to use maupgrade_noid for an original rom, the _noid file is, as implied by the name, to avoide the device from identifying, so you could flash a WWE Rom to a rather locked german device.
as you might have realised, the picture you posted shows the magician and not the blueangel, hence the name Maupgrade instead of Baupgrade, which again is solved by the _noid version of the file and putting the device to bootloader first.
that the window does not show the versions from what version you flash to what version exactlyu doesn't matter at all. but as mentioned before, you should use an xp machine which will work like a charm!
am i to understand, that you have the latest official t-mobile rom on? the wm2003se?
as fast and battery friendly that might be, it is so out-dated and practically no newer third party software will be supported, like the fantastic application SPB Online, and the interface is incredibly ugly. if you ever want to try and flash your device again, try my tips above and it will work out just fine, as you seem to have mixed up a few things, but never mind.
i wish you best luck for trying again and will stand by for support, whether something might still not work out as planned.
good luck
Chef_Tony
well if you upgrade under vista take a look here
also look here for MAUpgradeUT_NOID and proper files - it is on the bottom of the page, so you only need the nbf files