Database Develop

Hero Application

hi guys,
i want to install hero rom on google g1 but droiddeveloper lin is loss http://www.droiddeveloper.com/hrbuilds/app_s.zip
any alternative link ? rapid 4share etc ...
thank you

alperk said:
hi guys,
i want to install hero rom on google g1 but droiddeveloper lin is loss http://www.droiddeveloper.com/hrbuilds/app_s.zip
any alternative link ? rapid 4share etc ...
thank you
Click to expand...
Click to collapse
This forum has about 7 different versions as well as links to Rom databases please use the search. And please post your questions in the Q&A section not the Dev section. Also Hero is not an application, it is a phone & build Sense is a UI that runs on these devices.

Look up at the top of the forum where it says "don't start a new post questions and answers here " click on that.....

sory again, but install procedure is below
i dont know and alternative procedure.
hey guys i want to install hero rom on g1 help please
i am new user for google g1 phone. help again please....
(COPIED FROM HAYKURO's OFFICAIL THREAD)
Installation:
1. Download http://www.droiddeveloper.com/hrbuilds/app_s.zip
2. extract "app_s" into your sdcard's ext2 partition.
3. Download http://www.droiddeveloper.com/hrbuilds/hero-signed.zip
4. Place on regular sd card.
5. Reboot into recovery, wipe and flash.
6. Enjoy.

First of all, you need to root your phone, then you need to flash the new RADIO then flash new SPL,then create an ext2/3 partition on your class 6 sd card along with a linux swap partition, then you need to find a newer hero rom and flash that.

alperk said:
sory again, but install procedure is below
i dont know and alternative procedure.
hey guys i want to install hero rom on g1 help please
i am new user for google g1 phone. help again please....
(COPIED FROM HAYKURO's OFFICAIL THREAD)
Installation:
1. Download http://www.droiddeveloper.com/hrbuilds/app_s.zip
2. extract "app_s" into your sdcard's ext2 partition.
3. Download http://www.droiddeveloper.com/hrbuilds/hero-signed.zip
4. Place on regular sd card.
5. Reboot into recovery, wipe and flash.
6. Enjoy.
Click to expand...
Click to collapse
1.do you have a factory g1?
2.wat build is it?
3.have you rooted your phone yet?
4. do you have the lastest SPL and radio?
haykuro hero is OLD!! try a newer version hero_over or anyone

bigslanki said:
1.do you have a factory g1?
2.wat build is it?
3.have you rooted your phone yet?
4. do you have the lastest SPL and radio?
haykuro hero is OLD!! try a newer version hero_over or anyone
Click to expand...
Click to collapse
hi friend,
1- yes i have a factoury g1
2-i dont know.
3- Unfortunately any rooted
4- i try to download lastest spl and radio but i dont know anything... where can i install

http://forum.xda-developers.com/showthread.php?t=563679
http://forum.xda-developers.com/showthread.php?t=543081
You need to get to reading before trying anything with your phone. If you flash something without following directions/knowing what you are doing, I can guarantee you will brick your phone.

alperk said:
hi friend,
1- yes i have a factoury g1
2-i dont know.
3- Unfortunately any rooted
4- i try to download lastest spl and radio but i dont know anything... where can i install
Click to expand...
Click to collapse
just follow the links and read.....it seems hard but follow step for step and you will be fine. the good thing after you have rooted and installed radio/spl you wont have to do it again. and will be able to use any Hero/Dream(ROM).....
its been about 6months or more since i rooted my phone/ it just takes a bunch of reading and trial and error afterwards. goodluck!

bigslanki said:
just follow the links and read.....it seems hard but follow step for step and you will be fine. the good thing after you have rooted and installed radio/spl you wont have to do it again. and will be able to use any Hero/Dream(ROM).....
its been about 6months or more since i rooted my phone/ it just takes a bunch of reading and trial and error afterwards. goodluck!
Click to expand...
Click to collapse
ok dude,
i will try it,
i hope so i can do
regards...

[Q] Nexus One not start after root...

Hi all,
I have a big problem. I have my old Nexus One that never I root or modify. Today, after more than 1 year of use and reading various root guides I decide root my phone. My phone are updated from Google to 2.3.3 and say that is version GRI40. After finish all process of root the phone boot perfect and run perfect. Later I install also the Recovery-RA to can make backups, etc.
After this the phone not boot any more... Keep frozen at main screen with the big "X" and the padlock at bottom.
I can´t use any more my phone... any ideas or help? I forget one step?
I can boot perfect and run the Recovery(*) mode with Recovery-RA and all these options of this application.
All help are welcome!
THANKS!
(*) Recovery version is: RA-Passion-v2.2.1

Try flashing a new ROM, it sounds like it got corrupted when you installed RA. If you made a backup try restoring it, if not just do a factory reset and flash whatever ROM you pick.
Edit: You might also get more help if you ask in the Nexus forum.

OK, thanks!. I make a nandroid backup, that is the first that I try restore, but this not work. Now I try download any other. You know if exist exactly the same 2.3.3 that I have unmodified on my phone before I install RA? Thanks again!

There might be, just search for "stock ROM" in the nexus forum.

Thanks dbz!, I already use the GRI40_rooted_deodexed_busybox_apps2sd.zip that I found here and run again!!!
One more question: if I like on next update receive the update from Google that automatically update my phone like in the past before root, I can?

If you want to get an update from google you'll have to unroot. Usually when an update is released it isn't too long before a rooted version is released so just be patient.

You don't have to unroot the phone to get and install the OTA's in the future.
But when you apply a stock update you will loose root.
Sent from my Nexus One using XDA App

HELP! Galaxy Tab Frozen

While trying to update my Galaxy Tab's Overcome mod using the instruction on the site, I failed to read the part that said "Do note that you should NEVER update Overcome ROMs across different bases, like 1.4.x to 1.6.x or God Forbid, 1.4.x/1.6.x to 2.x! You need to do the full-shebang listed below…". When I tried to boot up the Tab, the standard T-mobile screen came up, followed by the picture attached. Does anybody have a possible fix for this?

*sighs* thats why we say read the guide fully before attempting to flash. Do that first. After you're done read it again. It will tell you everything. Start by booting into download mode and restocking to the stock firmware then follow guide directions word by word to install FULL overcome.
PS make sure your tab is well charged and your FINAL warning: REAd THE GUIDE!

Thanks...but how do you restore to stock firmware? I can't seem to find a guide that makes sense to me (I'm new to this). I don't really want to attempt to follow the guide and mess up again...

Medikay said:
Thanks...but how do you restore to stock firmware? I can't seem to find a guide that makes sense to me (I'm new to this). I don't really want to attempt to follow the guide and mess up again...
Click to expand...
Click to collapse
this is the stock firmware from t-mo, thanks to rotohammer.
http://forum.xda-developers.com/showthread.php?t=855851

Sorry for all the questions, but, after restoring to stock and following the install instructions for Overcome v2.0.0, my Tab has been stuck at the "the Overcome experience" screen for quite some time now. When going through the instructions, there was only one step I did not follow exactly; on step 6, instead of letting the Tab automatically reboot (it never did), I manually rebooted it. After that, I put the zip folder on an external sd card (the Tab would not boot and instead stayed on the "android" screen) and installed overcome...Should I restore again?

[Q] Need help installing StreakROM?!

Hello, noob here... I need help flashing StreakMOD onto my Rooted Dell Streak 7. I have tried and been unsuccesful. I don´t really know anything about flashing or fastboot or whatever its called. All that I really want to do is back-up my ROM (Nandroid) so i can get dj steves honeycomb.
Step by step instructions (that a noob would understand) would be nice!!! Thanks!

If you don't get how to do it right out of the gate, you need to step way back and learn how android works before you do ANYTHING at all.
Unless you got money to burn.

OK. Well, I figured out how to do all of this with some time. But I am running 2.2.2 Stock and i need to Re-Name a file that does NOT exist on my streak 7! I used ES file explorer to try to access the Install-Recovery.sh and re-name it Please_dont_install-recovery.sh. Though the file is NOT on my device.

I can see you ignored my advice, lol.

Actually if you read DJSteve's first post in the HoneyStreak thread, it tells you step by step how to put honeycomb on and also how to revert to a stock 2.2.2 using nvflash. theres even links to get the proper apps and instructions there as well.
first rule - RTFM, next do it again, if still not getting it, stop and back away.
Even if you know what you are doing there's always that chance you will brick your device.

Help with GB update

Hi All,
I am looking at a step by step guide for the GB upgrade which includes the complete backup procedure and also the steps we need to follow for this upgrade. e.g. when i connect my phone to the laptop and run LG mobile update the mobile update software keeps on running but does not find anything.
Can someone please help or direct the new users to achive their GB upgrade with wasy steps.
Thanks in advance for all the new comers.

raj_malhotra said:
Hi All,
I am looking at a step by step guide for the GB upgrade which includes the complete backup procedure and also the steps we need to follow for this upgrade. e.g. when i connect my phone to the laptop and run LG mobile update the mobile update software keeps on running but does not find anything.
Can someone please help or direct the new users to achive their GB upgrade with wasy steps.
Thanks in advance for all the new comers.
Click to expand...
Click to collapse
READ UR MANUAL! You have LG PC suit right? Back it up with this! If your phone is rooted, backup with Titanium Backup! (USE search), If your phone is rooted, boot to CWM and do a backup from there, just to be in the save position.
Connect your phone to USB, choose install Driver!
Install it
Then your phone should be recognized, and you should see, if an update is availiable.
If it is, push Start SW UPDATE!
Follow instructions and you have ur new SW installed.
DO a factory reset, since this often solves problems after an update.
Be happy ever after

Thread closed
raj_malhotra said:
Hi All,
I am looking at a step by step guide for the GB upgrade which includes the complete backup procedure and also the steps we need to follow for this upgrade. e.g. when i connect my phone to the laptop and run LG mobile update the mobile update software keeps on running but does not find anything.
Can someone please help or direct the new users to achive their GB upgrade with wasy steps.
Thanks in advance for all the new comers.
Click to expand...
Click to collapse
You need to do your own research. Read the stickies at the top of the forums and follow the instructions once you feel comfortable. XDA isn't a support forum, it's a development forum, these ROMs and other modifications are provided to those who know what they're doing. Educate yourself before you proceed.