Radio flash error please help
How you guys doing,
I'm new to this whole thing.
I'm trying to flash my phone with the hero rom.
I just rooted it and trying to install the new radio.
It gives this error.
E:Failure at line 2: assert getprop("ro.product.device") == "dream" || getprop("ro.build.product") == "dream"
I tried google at searched here but found nothing. Please help guys if you can
are you using the radio from the htc site? or where did you get it from?
yes I got it from the htc website and then I tried one from http://saphire-port-dream.googlecode.com or something like that.
my only guess could be you got a bad download since i got my radio from the link you posted. try downloading it again and see if that will solve your problem
I did but it didn't help
mods please delete this thread, posted twice.
...............Didn't see the other post......................
ROM: cyan 4.02 +1.4rec
When i try to flash radio v2 to my g1 the error reads "E:No digest for org.anddev.andcam.m3d.rar
E:Verification failed."
any ideas guys? andcam m3d is an app i installed then uninstalled becuase i didnt want it. ???dnt really know what to do here
bump.
c'mon.. this is xda-dev's.. i know somebody knows the answer!!!
What is radio v2? Do you mean ota radio 2.22.19.26I? Can you provide the link you got it from? No digest usually means the package wasn't signed right or something? A link would help a lot
yes. that is the version i am trying to flash.
it was obtained from here http://sapphire-port-dream.googlecode.com/files/ota-radio-2_22_19_26I.zip
dont no what the ANDCAM 3D application has ANYTHING to do with flashing this radio. neither does a .RAR file.???
Hey all,
I just recently installed the JF 1.51 rom so I could take advantage of having root access..
From what i've experienced it's workin' great.
The only problem I seem to have is my bluetooth connections, like my headset.. I've tried two, (both worked perfectly before I installed the rom); they seem to pair and connect without flaw, but I can't hear anything through it and the person on the other line can't hear me. I'm also experiencing issues with my speaker phone performance. (I might just be imagining the speaker phone issues, but still I would like to get this sorted out). My 3g signal seems to have been decreased as of late, and my GPS takes a little longer to locate my position. During the rom installation process, I installed an updated radio from the stock RC27 (or 29 I forget exactly)
So currently here are my specs:
Firmware version: 1.5
Base band (Last 4 entries): 1.22.14.11
Kernal version: 2.6.27-00392-g8312baf [email protected] #2
Build Number: CRB43
I tried downloading the radio image from HTC (See attached file: Screen shot 2009-09-07 at 3.46.30 PM.jpg )
And the steps I took in doing that were compressing the file, naming it "update.zip", and trying to install it
So pretty much I'm just asking what you guys think I need to do.
Do I have the correct radio version already, and my problems are just with Jf's Rom?
Is there a certain way I'm supposed to boot the HTC radio image?
Is there another radio version I'm supposed to download?
Should I just install the official 1.5 because I'm a total noob?
Thanks for all your help, I really appreciate it. I've searched the forums, and could not find specific instructions on how to solve my problem. And sorry for previously posting in the wrong section.
-Mike
nopotential said:
Hey all,
I just recently installed the JF 1.51 rom so I could take advantage of having root access..
From what i've experienced it's workin' great.
The only problem I seem to have is my bluetooth connections, like my headset.. I've tried two, (both worked perfectly before I installed the rom); they seem to pair and connect without flaw, but I can't hear anything through it and the person on the other line can't hear me. I'm also experiencing issues with my speaker phone performance. (I might just be imagining the speaker phone issues, but still I would like to get this sorted out). My 3g signal seems to have been decreased as of late, and my GPS takes a little longer to locate my position. During the rom installation process, I installed an updated radio from the stock RC27 (or 29 I forget exactly)
So currently here are my specs:
Firmware version: 1.5
Base band (Last 4 entries): 1.22.14.11
Kernal version: 2.6.27-00392-g8312baf [email protected] #2
Build Number: CRB43
I tried downloading the radio image from HTC (See attached file: Screen shot 2009-09-07 at 3.46.30 PM.jpg )
And the steps I took in doing that were compressing the file, naming it "update.zip", and trying to install it
So pretty much I'm just asking what you guys think I need to do.
Do I have the correct radio version already, and my problems are just with Jf's Rom?
Is there a certain way I'm supposed to boot the HTC radio image?
Is there another radio version I'm supposed to download?
Should I just install the official 1.5 because I'm a total noob?
Thanks for all your help, I really appreciate it. I've searched the forums, and could not find specific instructions on how to solve my problem. And sorry for previously posting in the wrong section.
-Mike
Click to expand...
Click to collapse
it doesn't look like the radio took when you installed it. did you say you compressed the zip file first? Just download it, rename to update.zip and flash it. If you check the number in settings it should match. And this is probably contributing to your connection issues.
good luck.
willworkforart said:
it doesn't look like the radio took when you installed it. did you say you compressed the zip file first? Just download it, rename to update.zip and flash it. If you check the number in settings it should match. And this is probably contributing to your connection issues.
good luck.
Click to expand...
Click to collapse
Ok, I just tried (again)
Results:
Installing from sdcard...
Finding update package...
Opening update package...
E: Can't open /sdcard/update.zip
(bad)
Installation aborted
Edit: btw, I am restarting while holding the "Home" Button, and then when the S.R.U screen comes up, I press "alt"+"s"
This may seem dumb to ask but if you are using windows just name to " update ", windows hides the file ex. Also try redownloading radio and retrying
I always have hashtab installed: http://beeblebrox.org/
That way you can right-click the file, go to the "file hashes" tab and see the MD5 which is given on the website as "checksum". Then you know for certain it downloaded correctly, you can also check after copying to SD card for maximum sureness.
gridlock32404 said:
This may seem dumb to ask but if you are using windows just name to " update ", windows hides the file ex. Also try redownloading radio and retrying
Click to expand...
Click to collapse
Im on a mac, and I changed the extension. I know I did.
Im pretty sure I got the whole file, I downloaded it twice. And tried to boot it up twice. 3 fails.. One of each of the attempts, and One for me because I'm just so lost on this stuff...
nopotential said:
Im on a mac, and I changed the extension. I know I did.
Im pretty sure I got the whole file, I downloaded it twice. And tried to boot it up twice. 3 fails.. One of each of the attempts, and One for me because I'm just so lost on this stuff...
Click to expand...
Click to collapse
did you try what AdamPI suggested about the md5sum?
david1171 said:
did you try what AdamPI suggested about the md5sum?
Click to expand...
Click to collapse
That's not the problem.. My most concerning/interesting failure display is
Installing from sd card...
Finding update package...
Opening update package...
Verifying updat package...
E:No Signature (15 files)
E:Verification failed
Installation aborted
You only get a no sig if you are not rooted, can you check your bootloader and post what it ays, I know you were running jf so you must have been rooted but sometimes strange things happen
gridlock32404 said:
You only get a no sig if you are not rooted, can you check your bootloader and post what it ays, I know you were running jf so you must have been rooted but sometimes strange things happen
Click to expand...
Click to collapse
Can you describe to me what and where is the boot-loader?
Wow, umm.......yeah, turn off your phone and hold camera and power to turn back on and enter the bootloader and do the three finger salute (talk menu end) to reboot, same bootloader that you need to do to root
gridlock32404 said:
Wow, umm.......yeah, turn off your phone and hold camera and power to turn back on and enter the bootloader and do the three finger salute (talk menu end) to reboot, same bootloader that you need to do to root
Click to expand...
Click to collapse
Ok. The info for my radio is 1.22.14.11
I was looking for the top line of info 32b pvt s-on or s-off
About the MD5sum
nopotential said:
That's not the problem..
Click to expand...
Click to collapse
How can you tell thats not your problem without checking it. You got to run thru all possiblities. Also if you are using the newest recovery you don't have to rename to update you just flash any .zip.
And whats up GridLock where you been all day. It's been a boring day at work, Thanks.
gridlock32404 said:
I was looking for the top line of info 32b pvt s-on or s-off
Click to expand...
Click to collapse
Top Line: Drea100 PVT 32B
supremeteam256 said:
How can you tell thats not your problem without checking it. You got to run thru all possiblities. Also if you are using the newest recovery you don't have to rename to update you just flash any .zip.
Click to expand...
Click to collapse
Good point, I'll check it out.
You stil haven't said if the secutity is on or off
Supreme, I had been up all day, than the night, over the night I was listening to a crying girl all freakin night who's boyfriend cheated on her, then the guy calls up at like 4 in the morning and all of a sudden she was alright with him. Oh did I snap on the girl and ripped her apart, so I came home drank a few beers and just woke up still in a foul mood
gridlock32404 said:
You stil haven't said if the secutity is on or off
Click to expand...
Click to collapse
It doesn't indicate..
Should say after the board type s-on or s-off, you know what **** it, download the rc package for your area, put the dreaimg.nbh on your card and start the rooting process over since you can get in the bootloader
Ok I got it. Here's what I discovered..
Im running on a mac, so when I downloaded the zip file (for the radio update) it would automatically unzip it. When I named it "update.zip" I did change the extension, but it didn't display as it should. I even tried to compress it after it automatically unzipped.. but obviously that doesn't work. (Well, now it seems obvious).
So I guess for noobs like me, let this be a lesson. Use a PC, or learn how your mac operates.
And btw, my bluetooth issues have been fixed.. and my speaker phone actually does seem more prominent. Thanks for everyones help, I really appreciate it.
-Mike
Hey, by you learning, I learn for the next person with a ? So thank you and I am gald that you solved your problem
Newbie here. So i just got new g1 in the mail so i wanted to try to put the hero rom on it because i really like how it looks. I followed a tutorial to take my 1.5 to root on youtube, then followed another on the same channel to partition my sd card and install a version of the hero rom. Now ive tried about 4 different roms and im having the same problem with all of them. When im about to flash from my .zip it goes halfway through the process and then give me this error
E:can't chown/mod /system/xbin/sqelite3
(no such file or directory)
E:Failure at line 43:
set_perm 0 0 04755 SYSTEM :xbin/sqelite3
installation aborted
depending on the mod the failure at line is a different number (41 or 43) but same message. Anyone know how to fix this so i can get that new 2.0 flashed and running on my g1?
wrong section
DANGER SPl flash it
radio first, then danger SPL.
tried the radio first/ danger method, = bricked phone.. thanks...
Hi,
This should be in the q-a forum but do this:
Put a sd card in your phone with the firmware on it named as update.zip.
Go into recovery and flash it.
Hopefully your phone will be revived.
ach1lles said:
tried the radio first/ danger method, = bricked phone.. thanks...
Click to expand...
Click to collapse
ach1lles said:
tried the radio first/ danger method, = bricked phone.. thanks...
Click to expand...
Click to collapse
if u can get into recovery or fastboot ur phone is not bricked.
ach1lles said:
Newbie here. So i just got new g1 in the mail so i wanted to try to put the hero rom on it because i really like how it looks. I followed a tutorial to take my 1.5 to root on youtube, then followed another on the same channel to partition my sd card and install a version of the hero rom. Now ive tried about 4 different roms and im having the same problem with all of them. When im about to flash from my .zip it goes halfway through the process and then give me this error
E:can't chown/mod /system/xbin/sqelite3
(no such file or directory)
E:Failure at line 43:
set_perm 0 0 04755 SYSTEM :xbin/sqelite3
installation aborted
depending on the mod the failure at line is a different number (41 or 43) but same message. Anyone know how to fix this so i can get that new 2.0 flashed and running on my g1?
Click to expand...
Click to collapse
The parts in bold are only in the Danger SPL. If you don't want to use it your SOL.
phone is dead, doesnt turn on at all no matter which mode
ach1lles said:
phone is dead, doesnt turn on at all no matter which mode
Click to expand...
Click to collapse
Even after charging it?
Dude.....every hero thread posts the requirements and the dangers. If you flashed and bricked, u r either really unlucky or u messed something up. Thousands of us have the danger spl and no issues. The warning is serious. Sorry if you just figured that out. If you have more detail of what ur facing now we may be able to hekp
ach1lles said:
tried the radio first/ danger method, = bricked phone.. thanks...
Click to expand...
Click to collapse
Wow! You sure know how to take responsibility for your own actions. If you can't read instructions and bricked your phone, it is your fault, not anybody elses. And if you did do the radio first, then danger spl, it wouldn't be bricked... that is proper order. Now, I am betting you did it the other way around, or your phone is dead and you don't know how to charge it. Either way, probably should stick to the stock Android, plenty fast enough, and it something does go wrong at least you can blame HTC for it then.
pjcforpres said:
Wow! You sure know how to take responsibility for your own actions.
Click to expand...
Click to collapse
I cant tell but did he flash the radio twice then flash the spl?
What spl was your phone at before?
Ace42 said:
I cant tell but did he flash the radio twice then flash the spl?
What spl was your phone at before?
Click to expand...
Click to collapse
No idea, impossible to tell at the moment. $5 says his phone is just dead, everything is fine, and we never hear back because he is too afraid to admit it.
pjcforpres said:
No idea, impossible to tell at the moment. $5 says his phone is just dead, everything is fine, and we never hear back because he is too afraid to admit it.
Click to expand...
Click to collapse
his probably died in recovery mode =/
mustve forgot to plug in that charger.
can some1 please help me ... iv just unrooted my phone and im now running RC7 ... i was told that my phone would update to the latest version of android in a couple of hours .... its been 2 days and still no update ... can some one please tell me where i can download the official t-mobile uk updates from ??
thanks
by the way iv got a uk t-mobile G1 !!
RC8
http://android-dls.com/files/apps/signed-kila_uk-ota-116470-prereq.TC5-RC7.7a5a0178.zip
CRB17
http://forall.ch/WordPress/download/6/
CRB43
http://www.filestube.com/600cd9c345a8f0c003ea,g/signed-kila-eu-CRB43-from-CRB17-1638e1b4.html
"Google Is Your Friend"
hey there thanks for the help ... iv managed to update my phone to RC8 but now when i try to update to CRB17 or CRB43 i get the following error
E:failure at line 1 :assert file_contains("SYSTEM:build.prop" , "ro.build.fingerprint =tmeu_killa_eu/dream/trout:1.1/TMI-RC9/128600:user/ota-rel-keys,release-keys") == "true" file_contains ("SYSTEM:build.prop", "ro.build.fingerprint =tmeu/kila_eu/dream/trou Installation aborted.
can you please help on how i can get my phone to the latest version of android thanks
For some reason the wiki I was looking at skipped RC9 as one of the UK updates listed, but here's a link
http://rs56.rapidshare.com/files/204891929/signed-TMI-RC9-from-TMUK-RC8.a37580e9.zip
that will get you RC9 and then you can apply CRB17 then CRB43