Need a fix ASAP PLEASE! - Galaxy S I9000 Q&A, Help & Troubleshooting

I'm pretty sure my phone isn't bricked.
Ok, this is what I've done...
I'm on official Froyo for UK, unbranded handset (i think jpo/jpp firmware).
I tried to install Voodoo Lagfix (stable, released today) by Odin.
I started Odin up, put PDA as the Voodoo file, put my phone into download mode, connected the usb, waited for odin to detect it and then clicked start.
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> zImage
<ID:0/009> Complete(Write) operation failed.
That's what Odin said, so I presumed it failed.
The screen was black and not doing anything so I unplugged it and removed the battery. When I put in battery and tried to start up phone, I get a logo of a flip phone on the left, with a line dash to a yellow triangle with black explanation mark, and then another dashed line to a computer.
Can I have a set of instructions on how to continue please!

which ROM did you install?
make sure the TAR is not corrupted
even if it failed, you can flash it again
the only way to find out if it works is to unplug and reboot it
there is always the JIG option if you don't have the 3 button modes

AllGamer said:
which ROM did you install?
make sure the TAR is not corrupted
even if it failed, you can flash it again
the only way to find out if it works is to unplug and reboot it
there is always the JIG option if you don't have the 3 button modes
Click to expand...
Click to collapse
It's not a ROM, I tried to put on Voodoo Lagfix 5 (stable) onto my stock firmware from Kies (JPP/JPO).
Shall I try to reflash the Lagfix? I think I need to flash a firmware, can someone please tell me, starting to get a little stressed haha.

BTW, Download Mode is working.

I would imagine you are going to have to flash stock firmware to it, you can try flashing it again or perhaps a different kernel

got it working now guys
just reflashed it and it worked

Related

[Q] Odin3 stopped while installing JH3... Help?

Hey guys,
While on my way to the super root patch ( forum.xda-developers.com/showthread.php?t=751934&highlight=stock ), I first am trying to install JH3. I got Odin3 v1.00, put the .tar in the PDA box, and clicked start. Here's the log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> Removed!!
It hasn't changed in about 10 minutes. Any thoughts?
Thanks!
Pull the battery, get back into download mode with the key combo and start again. Odin is finicky and sometimes takes more than one try.
Sent from my SAMSUNG-SGH-I897 using XDA App
thecoolestcow said:
Hey guys,
While on my way to the super root patch ( forum.xda-developers.com/showthread.php?t=751934&highlight=stock ), I first am trying to install JH3. I got Odin3 v1.00, put the .tar in the PDA box, and clicked start. Here's the log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> cache.rfs
<ID:0/004> dbdata.rfs
<ID:0/004> factoryfs.rfs
<ID:0/004> Removed!!
It hasn't changed in about 10 minutes. Any thoughts?
Thanks!
Click to expand...
Click to collapse
Well the log says "removed" so somehow your USB connection got interrupted... which means your phone is going to be in Phone/Computer screen hell.
Close Odin, unplug your phone, pull out your battery/sim/sdcard.
Open Odin, put in your battery, attach USB, and hold both volume buttons without applying power to get back into download mode to try again
If that doesn't work:
Unplug the phone from everything, hold both buttons and power... keep holding power till the screen turns off, continue holding power- the screen will turn off a second time, at that point release power and continue holding the volume buttons and you *should* get the download screen
Thanks for the quick replies! Unfortunately, Odin doesn't seem to see that it's connected. I don't see anything in the ID:COM boxes. I changed USB ports, nothing. Should I uninstall and reinstall the drivers?
thecoolestcow said:
Thanks for the quick replies! Unfortunately, Odin doesn't seem to see that it's connected. I don't see anything in the ID:COM boxes. I changed USB ports, nothing. Should I uninstall and reinstall the drivers?
Click to expand...
Click to collapse
Odin won't see it unless the phone is powered up in download mode, if you've gotten it to download mode and Odin still can't see it then yeah... your drivers might be fubar
Odin tends to work best for me if I get everything set up in Odin just short of pressing the start button before connecting the phone to the computer and putting it in download mode. Maybe it's superstition, but it seems to help me avoid some of those timeout issues.
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm curious..what happens when you remove and replace battery, hold power up and hit power...wall o text?
Got it! Everything installed, super root added. Thanks for all your help!
Ok I apologize if this isnt where this belongs, but i have yet to find an answer i understand. Is odin a program that i can download to a desk top computer and run? I keep seeing open odin and do this , open odin and plug in phone. its always sounds like an easy step, but for someone who doesnt know how to even get odin, it has prevented me from doing alot of things with my phone. I see "needs odin' an i move on to the next thread I know its a firmware to help flash roms, but that is about it please educate a supernoob lol
I understand what you mean, I just got my captivate yesterday and spent a six+ hours figuring that stuff out. I think I might try to write up the steps I went throigh to help other Android noobs like me. I'm coming from an iphone so this is all new for me. The good news: I figured it all out finally and so can you. I now have JH3 installed, and the super root mod, overclocked and evertything. My quadrant score went from stock of around 900 something to 2160 after all the tweaks I applied. I cant wait to see how it performs with 2.2!
Ok, so basically heres what i figured out; to use Odin, you'll need a firmware image, and Odin will be included. I recommend upgrading to JH3 and installing SuperRoot. It makes everything pretty painless. SuperRoot installs lagfix, root, and much much more all at once.
Search for the SuperRoot thread (IIRC). In there is a link to instructions on how to restore your phone to stock. Look for the thread on JH3 and get that image. Post 6 in that thread has instructions, and the restore to stock thread has more of an explanation. Then, you can do whatever else you need. HTH.
Ill get on my pc in a minute a put the links in here.
Sent from my SAMSUNG-SGH-I897 using XDA App
Ok, I was wrong about the title: it's SuperRooterExtreme. I apologize for not being able to post links for you.
Code:
forum.xda-developers.com/showthread.php?t=751934
Follow the instructions on the next two links to flash to JH3. The fist link is for JH2, but the directions still work. Just download the JH3 firmware.
Code:
forum.xda-developers.com/showthread.php?t=751518
Code:
forum.xda-developers.com/showthread.php?t=731989
This page has all the files you need:
Code:
samsung-firmwares.com/i897.htm
You need the firmware file, the PIT file, and Odin. The links for all of that is on the above page. The PIT file and Odin are under the section called "Flash Tools."
Once you've restored, you can follow the instructions for the first link I gave (SuperRooterExtreme). Or, you can do whatever else you want. This is just what I figured out yesterday.
I know what it's like to not know what Odin is! Took me forever to figure it out, I downloaded all kinds of stupid crap before I got it right.
The odin I downloaded from the samsung firmware website is only 167kb and an unknown file that won't open what's that about
Sent from my SAMSUNG-SGH-I897 using XDA App

Getting a symbol of a phone and PC with a caution sign inbetween when I boot my phone

What does that mean? I'm getting it after I put my phone into download mode and tried to put my phone back to stock with Odin. Odin hung up on me and I had to disconnect.
What do I do?
I could be wrong but I believe that's a brick..? I've never bricked but that would be my guess
Sent from my SAMSUNG-SGH-I897 using XDA App
Oh, jesus, don't tell me that.
Whew, ****, got it back into DL mode using this: http://forum.xda-developers.com/showthread.php?t=775911
I had this same issue, now I can't seem to get my phone to power up at all. any suggestions?
Post above yours
it is getting to the same point about 1/8 of an inch of a blue bar and it stops same problem I have been having
What build is your phone, located under battery, mine is 1008
1009, reconnected/ restarted odin and its on
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
been there for 5 minutes or so
Hookiloo said:
1009, reconnected/ restarted odin and its on
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
been there for 5 minutes or so
Click to expand...
Click to collapse
Not good. There is than one odin.sounds like you are going to have to use a different method. There is an odin that people with 1010 build have to use. Let me see if I can find the thread
try this
M y phone need this done 3 or 4 times before it finninshe odin some times.
http://forum.xda-developers.com/showthread.php?t=775911
odin is wonky especially if you have the stock rom jf6 on there. it is always best to have odin prepared with the pit and .tar files first and to use the usb cable + 2 buttons to get download mode, i remember way back when my phone was stock and i tried to flash stock it wasn't working. i flashed a beta rom jh2 ( the only altenative at the time) and it worked. never had another issue flashing and i have been through many froyo versions and ports from other galaxy s phones and used all the 2.1 roms. odin jf6 just didn't like to flash over jf6 but it usually eventually works.

[Q] Stuck in Odin when flashing kernel

I was following the overcome guide and when i came to step 8/9 (flash overcome kernel) it didn't work, so then i chose the same pit which you use in a previous step and also the kernel and now it worked with the pit but not the kernel. i got stuck in download mode and tried to flash only kernel again but it didn't work not it got stuck on ConnectionSetup... or something like that. I think it couldn't find the device, i shut down odin and took out the micro-sd card which someone said could cause problems but it still didn't work. now i'm stuck at a screen like this: picture of phone .. ! .. picture of computer. I guess it means it can't connect to the computer. Anyone know what to do? I've tried searching the forums and tried some different stuff but haven't succeded.
Edit: Seems like i can use odin even though i don't get into the download mode, will update soon. Seems to work correctly, i'll give the flashing another try and i will make sure to cross the right boxes and so on.
Edit2: This time i checked that i had all the correct things crossed in Odin but when i try to flash the kernel it fails. what should i do? i come from gingerbread 2.3.3 (re-stocked) so it can't be the bootloader right?
Edit3: This is what i get when i try to flash the kernel:
<ID:0/036> Added!!
<ID:0/036> Odin v.3 engine (ID:36)..
<ID:0/036> File analysis..
<ID:0/036> SetupConnection..
<ID:0/036> Initialzation..
<ID:0/036> Get PIT for mapping..
<ID:0/036> Firmware update start..
<ID:0/036> ‹
<ID:0/036> NAND Write Start!!
<ID:0/036>
<ID:0/036> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Edit4: From my research it seems i have the same problem as people hade with the signed/locked bootloaders on froyo, however i'm running 2.3.3 and the thread specifically said not to use their patch so i have no idea of how to solve this. Help would be very appreciated.
Edit5: finally works, thanks to this: http://forum.xda-developers.com/showthread.php?t=1324052

Stuck at Sbl.bin

I recently upgraded from MIUI to WeUI, but decided I didn't like it.
So to get a fresh new start I tried flashing back to stock with Odin3 One-Click Downloader. However it froze so I pulled out the USB and tried again. Now I've been spending the last 6 hours looking up and trying different things like roger's, GB one clicks, etc.
My phone won't even start, but I can make it go into download mode with my USB jig. Only problem is that I keep freezing at Sbl.bin when using Odin.
Am I screwed or what?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
You're going to end up hard bricking if you keep trying
b-eock said:
You're going to end up hard bricking if you keep trying
Click to expand...
Click to collapse
I think I already have. I mean it's not even turning on. Only time it turns on is when I stick my USB jig into it to go into download mode. But that's it. No 3-button either.
If it still turns on with a jig then your not hard bricked luckily
Sent from my SGH-I897 using xda premium
Try another package without bootloader. Remember to run odin as admin and use a mobo usb port.
Sent from my ICS powered Captivate using Tapatalk
read this thread then before you try and use odin again go get a stock package WITHOUT bootloaders, that way if it still looses connection you can't hard brick, good luck.
edit: ninja'd lol

How to restore stock

My rooted T-mobile Note did not like the OTA update it received today (hung at the samsung logo). I reflashed the rooted UVLG3 firmware image, following the instructions at http://androidlegend.com/how-to-root-t-mobile-galaxy-note-sgh-t879/. This worked, and I'm ignoring the OTA update for now.
I don't need root anymore, i didn't really use it anyways, I would like to get back to stock.
How do i get back to the stock/factory image? From http://forum.xda-developers.com/showthread.php?t=1837907, I see items B (T879-STOCK RECOVERY IMAGE) and D (T879-STOCK BOOT IMAGE). In ODIN, do I need to load one or both of these in one the sections (Bootloader, PDA, Phone, CSC, or UMS) and would i then hit the "Start" button?
Thanks for any help.
Just go to Samfirmware.com and download the tar file for the T879. Put it in the PDA section and start.
Sent from my SAMSUNG-SGH-I717 using xda premium
Thanks Charlie, that worked! In case any other newbie like me wants to know what to do, this is what i did:
Downloaded/installed Samsung Kies
Downloaded Odin 3.07 from www __ android __ gs
From samfirmware __ com, i searched for T879 and downloaded the file for "SGH-T879 USA (T-Mobile) 2013 January Android 4.0.4 T879UVMA1 T879TMBMA1". The ZIP file "T879UVMA1_T879TMBMA1_TMB.zip" has a large file called "HOME_T879UVMA1_CL892179_REV02_user_mid_ship.tar.md5", which I renamed to .tar
Powered off the phone, removed battery, connected USB cable to computer and phone, inserted battery, press power/vol-up/vol-down then hit vol-up to get into download mode
Started ODIN3 v3.07 (the box read 0:[COM4], message window read "<ID:0/004> Added!!")
Pressed PDA button, loaded the TAR file
Pressed START
Took about 4 minutes, then the green status bar finished, box above says RESET!, phone resets.
Message window:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> amss.bin
<ID:0/004> cache.img.ext4
<ID:0/004> mdm.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
The phone automatically reset and started the boot sequence, took a few minutes to load updates, and everything was groovy again. When i connect the phone to Samsung Kies on my computer, it now reads "This is the latest firmware" (used to read something like "we don't what firmware is loaded").
How can i rooting the phone if i want to keep stock rom?
Do i have to do same as regular root?
Thank you.
Sent from my SGH-T879 using xda premium
I got it
Sent from my SAMSUNG-SGH-T879 using xda premium
bigape-revamped said:
Thanks Charlie, that worked! In case any other newbie like me wants to know what to do, this is what i did:
Downloaded/installed Samsung Kies
Downloaded Odin 3.07 from www __ android __ gs
From samfirmware __ com, i searched for T879 and downloaded the file for "SGH-T879 USA (T-Mobile) 2013 January Android 4.0.4 T879UVMA1 T879TMBMA1". The ZIP file "T879UVMA1_T879TMBMA1_TMB.zip" has a large file called "HOME_T879UVMA1_CL892179_REV02_user_mid_ship.tar.md5", which I renamed to .tar
Powered off the phone, removed battery, connected USB cable to computer and phone, inserted battery, press power/vol-up/vol-down then hit vol-up to get into download mode
Started ODIN3 v3.07 (the box read 0:[COM4], message window read "<ID:0/004> Added!!")
Pressed PDA button, loaded the TAR file
Pressed START
Took about 4 minutes, then the green status bar finished, box above says RESET!, phone resets.
Message window:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> amss.bin
<ID:0/004> cache.img.ext4
<ID:0/004> mdm.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
The phone automatically reset and started the boot sequence, took a few minutes to load updates, and everything was groovy again. When i connect the phone to Samsung Kies on my computer, it now reads "This is the latest firmware" (used to read something like "we don't what firmware is loaded").
Click to expand...
Click to collapse
I did the same but the phone still hangs at the Samsung logo after I get the TMo Galaxy Note logo.
I had CyanogenMod on it with TWRP and tried to do a restore (bad idea) that's when it bricked.
I got a USB jig to get me to download mode so Odin would see it. All was installed just great but still the logo..
Just remember to flash the flash counter zip if u need to send it over to repairs with Samsung cus if they know ur phone is rooted they won't fix it cus rooting a device voids ur warranty... I flashcounter.zip everything I flash a rom... I usually flash that file last...
Sent from my SGH-T879 using xda premium
thanks all I just learn something from this:good:
Problem solved
JessSayin said:
I did the same but the phone still hangs at the Samsung logo after I get the TMo Galaxy Note logo.
I had CyanogenMod on it with TWRP and tried to do a restore (bad idea) that's when it bricked.
I got a USB jig to get me to download mode so Odin would see it. All was installed just great but still the logo..
Click to expand...
Click to collapse
Got it going. Had to jump on a Windows XP 32 bit PC to get the USB drivers to see the phone. Thanks for the help.
Running great on stock.
I have the update on my status bar but I'm wondering what did the update do for u? Can u post a screen shot of ur about phone info? Thnx
Sent from my SGH-T879 using xda premium
I'm curious, can I flash the stock everything of t879 on my at&t note? I have the i717 switched fully to t-mobile with twrp. I want the ota to upgrade from 4.04
Sent from my SGH-T879 using Tapatalk 2
JessSayin said:
I did the same but the phone still hangs at the Samsung logo after I get the TMo Galaxy Note logo.
I had CyanogenMod on it with TWRP and tried to do a restore (bad idea) that's when it bricked.
I got a USB jig to get me to download mode so Odin would see it. All was installed just great but still the logo..
Click to expand...
Click to collapse
I had to flash TWRP temporarily and wipe the phones emmc and flash the stock ROM again above instruction and worked. I guess before doing anything you should wipe/factory reset your phone first before flashing the stock ROM, this I can't test but just based on logical explanation.
My solution for being stuck on the Samsung logo
I know the last post was done a year earlier, but I thought I'd share this information I learned yesterday. After numerous flashing attempts My Note was stuck on the samsung logo.
I had soft bricked my Note by not clearing out the data on my phone. The previous post here gave me a clue and not being really good at this, I wasn't able to install and get TWRP to play nice with my non-working stock rom image. But I was still able to get the the Samsung Recovery and Download modes.
The working solution (borrowed from a post by andersbot on another thread) was:
1. Go to Recovery mode. Do a "clear cache" and next a "wipe data". Then reboot.
2. Go to Download mode and then connect to a XP PC and start up Odin. Be sure to use the latest Samsung USB drivers.
3. Flash with Odin using ther stock firmware downloaded from sammobile.com. Only tick the boxes for f.reset time and autoreboot (Odin default). Click PDA and load the downloaded file renamed with .tar at the end instead of .tar.md 5.
I dont know if this was the easiest way to clear the data on my SGH-T879, but it worked, and my Note started up correctly with the stock rom.

Categories

Resources