Related
I was tapping away happily on my little used XDA2i and suddenly the touchscreen stopped working. There is no damage to it and I tried to soft and hard reset and nothing works.
Now I am at the opening screen after hard reset and it looks like the touchscreen is kippered.
Any ideas of a cheap mending solution?
Just to clarify - the display works fine it just doesnt respond to touch.
bushako
dude...i think the connectors must have gotten out of place from the motherboard...a simple solution is to go and hand it over 2 da nearest phone repair shop and i doubt it would be cheap so just find a way to open the pda(which is very very very simple and easy) and i have done that a hundred times and the xda2i still works perfectly..one of da reason why i love it soooo much,lol...anyways...the connectors are visible ones you get to open the back panel and see for yourself...
I have just got an XDA 2i. i got it very cheap in a not working state and the problem was as you described. The machine would power up but not accept input from the touch screen. I disassembled it, cleaned it up and rebuilt it and it now works fine. I assumed it was the connector for the touch screen. The job was quite simple but i am fairly technically competent. A replacement screen can be found on Ebay for as little as £14 GBP.
Ok, I have had this to pieces and also dismantled the screen to see what the problem might be, gave everything a wiggle and then rebuilt the machine.
Touchscreen still not working though the LCD still seems fine and so i am assuming that I haven't broken it.
Not sure what to do next as I cant find any XDA 2i touchscreens on fleabay. Anyone had exactly this problem and replaced only the touchscreen (not the LCD too) and could give me some tips. I couldnt see how to replace just the touchscreen ie where it would connect to the mainboard. Also - Stev - when you said you cleaned it - do you mean you actually cleaned the touchscreen part or the machine generally.
Thanks
Touch screen problem with no alignment
Have got 2 Qtek 2020i with defective touchscreens.After hard reset they get to the "align screen" image, and the PDA responds to the touch by moving the cursor between the 5 adjustment points - but alignment seemingly never occurs, as I can continue forever.I guess the touch screen in itself got misaligned - anyone with experience in this ? .I found replacement touch screens from Hong Kong for as little as $6.99/pc, and $2,50 for shipment to Denmark.
I have bought a replacement touchscreen from ebay, however it looks like it needs soldering at the back and the ribbon on the screen is a different layout. Anyone have any idea what to connect and to where?
Does anyone know whether the touch panel from XDA II will be able to fix to XDA IIi ? I am having problem with my XDA IIi(Alpine) it seems the touchscreen is not responsive. I have already tried opening the Alpine check the connectors it seems to be okay so i am suspecting the touch screen is the fault. I have found this website http://mobile.brando.com.hk/TouchScreenO2xdaII.php selling the replacement touchscreen but it stated there XDA II. Will it be a match for Xda IIi? Will it be easy to fix? Anyone with experience please help. Thanks.
I bought one on ebay for £12.98 that said XDA 2i and it looks like the one in your picture, which I dont think is the right one - I reckon that is the XDA 2 one version. I phoned the company I bought it from, in London and they said if I send the whole lot to them they will fit the new screen for £20 more which seems fair enough. That would mean the touchscreen fitted for £32 - a lot less than the £80-100 I've seen elsewhere.
Hi there. I picked up an important call whilst in the shower. Very little water fell on my Kaiser but I belive that this caused the screen to stop working. Or I have dropped it as well.
Now I tried the business card remove dust particle trick. Didn't work. So I disabled cube / Touchflo. Then I reinstalled my ROM. Basically, I can't align the screen... I tried using the Remote Screen Alignment tool as well.
What's weird is that when you leave the phone for a couple of seconds, the battery conservation feature kicks, and when I touch the screen, the screen powers back up. So I know the screen works but just not properly.
Do I have to replace my screen (or just the TOUCH component of it)? I'm not too good with hardware but can I take it apart and fix the problems?
EDIT: For those facing similar problems, use the trial version of SOTI Pocket Controller to work on your Kaiser remotely.
I'm sure someone knows what to do... please help.
I had the exact same issues you were having, I had to send it in finally so I hope it is warrantied.
jallenclark said:
I had the exact same issues you were having, I had to send it in finally so I hope it is warrantied.
Click to expand...
Click to collapse
nope, its out of warranty. I'm thinking of using pocketpctechs or some other similar service. Any suggestions?
I would just order a new screen and replace it yourself.
jallenclark said:
I would just order a new screen and replace it yourself.
Click to expand...
Click to collapse
Did they replace the entire screen or jus the TOUCH component? I heard that the TOUCH surface is way cheaper.
Also, I'm not too sure how to replace it myself.
when my tilt was in warranty they just gave a new device but on the call they said the screen was dead even though it displayed and had minimal responce.
I could be wrong but I don't think it would be easy (if even possible) to replace just the touch surface of the screen.
Hello my fellow android hackers, I need your help. Recently, my touchscreen has been completely unresponsive at the top of the screen, near the notifications bar area, but three times as thick. The problem with this (Besides having to go to my homescreen every time I need to access my notifications, or having to go into landscape mode) is that It often renders my phone useless. Often times when I select an object or slide across homescreens, the UI will select an object at the top of the screen. Shortly after, I will be unable to select anything on the screen, and if I try, the UI will select something at the top of the screen and will begin erratic movements around the homescreens, web browser, and almost any touchscreen interaction. This movement will occur whenever I try to interact with the phone's touchscreen whenever it is in this state.
This is not native to any rom, I've tried reflashing and trying many different roms. I know the touchscreen malfunction is native to the hardware, since I've tried reflashing the 2.xx.x.x.xx.6 and the 2.xx.x.x.xx.5 ruu. I think I will need to replace the touchscreen, so could anyone direct me to where to buy the part, a website to install the part, or both. I'm pretty sure I can find how to install the part, just not where to get it. Also, I'm not sure if it's a problem with the inner or outer lcd screen.
ANYWAYS, this problem is more common with the HTC Hero GSM, but HTC has said that some hero's have bad touchscreens.
Heres a link to a video demonstrating the problem. (I am running CM 6.0.0 test 2, it's a great rom)
http://www.youtube.com/watch?v=1ORe2rjWt7A&feature=related
This is with the hero cdma, but the broken area is on the side of the screen, not top.
http://www.youtube.com/watch?v=JYQnCOAtTLs&feature=related
This is to the GSM hero, but the issue is with the bottom of the screen.
This is a problem native to the HARDWARE, and occurred during normal use of the phone, just shortly after watching youtube videos and browsing the web.
Could anyone even direct me to a location to get this repaired, since the Sprint store said there was no way to fix it, but online many people had this issue and got it repaired by HTC customer care. Could anyone confirm this, or state the time length of a cdma sprint hero warranty purchased from Sprint in the US?
(Occassionally the phone works, but only for a short while and then It starts acting up again, usally during data use, like web browsing or using several apps)
Any help would be appreciated.
Is it humid where you live? Do you use a screen protector?
Sent from my HERO200 using XDA App
Yes, it is humid, and I don't use a screen protector. I think the processor was overheating during heavy use (watching video, etc) and I left the screen on for a while. I think that this damaged the screen.
Have you tried a different rom, or maybe flashing one of the new any kernels for your current rom? Almost sounds like it could be a driver issue. I did have a friend that had this problem on his stock hero, and sprint replaced it for him. If you ruu and it still does it, make a scene, they will replace it.
had the same problem with my hero, unresponsive directly below notification bar, as well as becoming completely useless randomly. took it into sprint, and the tech seemed to know exactly what the problem was. an hour later, it was fixed as well as my peeling buttons replaced...free. apparently the touch sensor was going out and it must happen more often than not considering the tech new what the issue was immediately.
Ok, I will not start another rant and rave I promise, BUT, I will say be very careful going to Sprint with a problem. I just had the same exact problem, I had to go to FOUR different stores, and finally instead of fixing my SPOTLESS Hero, they ordered me a "new" one, it has scratches all over the screen, the back cover hangs off, my hardware buttons(home,menu,ect...)are lose, and the metal where the ear speaker is is sticking out, be very careful dealing with sprint.Oh, yes this all happened in the last 4 days, they didnt give me a loner phone, and it took me 3 days to get this piece of **** they call a new phone. Just my experience.
This may be a problem beyond the scope of android, but seeing as I'm running it, I thought I'd try here first.
I've noticed that the lower left hand side of my screen has a "dead spot" where touch is simply not registered. To illustrate, I went to screen calibration's test screen and drew a straight line along the edge of the screen. (See Attachment)
I've tried recalibrating the screen (manually and resetting to default calibration) as well as wiping data and reinstalling the system. Reinstalling the system worked once, but then the problem came back and subsequent reinstalls did not fix the issue.
I'm running Incubus26jc super froyo [RLS 12] on the 15-07-10 340X480 Froyo Kernel.
Anyone else seen anything like this? As far as I can tell, the problem is not getting any worse. Currently, it's only a hindrance when trying to use keys in that region, but I can work around it by switching to and from landscape. It's a bit of a hassle, so I'm hoping someone may be able to shed some light on the situation.
I was sure it was hardware until the system reinstall fixed it, but am now baffled as I can no longer replicate the fix.
I have not tried reinstalling the kernel but will at some point in the next day or so. I'd like to avoid switching back to WM to check if the problem persists, but may have to... we'll see. Doing everything I can to make this phone last until the Incredible month of February when I'm up for an upgrade.
dont know the issue resolution... but i have the same with my touch vogue.. and in the same 'area' apparently as well.
hard for me to hit the 'a' key on my keyboard. hehe
I'm glad to see I'm not the only one... anyone else?
Bottom right corner for me... I was able to calibrate around it but it took a few tries.
Sent from my Full Android on Vogue using XDA App
The sensitivity across my screen was inconsistent some time ago. I found that years of my abuse had taken a tole on the exterior of my phone. It eventually got worse and I bought a new housing (with a new digitizer) on ebay for a reasonable price. If it is hardware then it really isn't that hard to fix if you like taking things apart.
If you're sure that win mo accepts input from that part of the screen then nevermind my post. I would play with a painting app though and investigate the hardware further.
I may be talking a little out my a$$ with this part but.. is it possible that in calibrating your screen the os may change it's settings on how hard you have to press and such also. that may be how you got it working.
In any case, my investment in a hew housing was well worth it considering how modern my old phone has become thanks to the developers here.
gooph said:
I may be talking a little out my a$$ with this part but.. is it possible that in calibrating your screen the os may change it's settings on how hard you have to press and such also. that may be how you got it working.
Click to expand...
Click to collapse
In my case, no - when drawing a straight line down or across the screen, the line starts 'moving' away from the stylus (like the picture in the OP).
Gah... now it's shutting itself off randomly and the dead spot has grown. Not good at all.
Yeah, mine was better for a while then 'slid' again. I ended up swapping the digitizer with my other Vogue and things are back to normal.
Sent from my Full Android on Vogue using XDA App
I have another vogue, but am weary of doing anything like that. How hard was it to get done?
All you need to do is switch the front half of the housing rather than the digitizer itself- it's not hard. There's a teardown guide somewhere in the forum, Google Vogue teardown and it should be at the top.
Sent from my Full Android on Vogue using XDA App
The only thing that worries me is that my spare vogue exists because it was dropped in a muddy puddle. I'm hoping the water damage isn't too bad. Guess we'll just have to see.
it is really annoying
I have the exact same problem and I too thought it was a hardware issue till I saw this Thread. I was ignoring it till two days ago when it started really bugging me. Now, I don't even need to press any button and it automatically gets pressed around the curve and I have a google search box there, so it keeps on searching for eee or sss randomly and started draining my battery. Is there a proper fix for this?
I thought I'd chime in too... I could never seem to calibrate the touchscreen properly in either Android or Debian. Changing the screen resolution (i.e. msmfb scaling) seems to have no effect, whether it's 240x320 or 640x480. Any area within 5mm or so of the edges of the LCD will register as the edge, making "A" and several other keys on the virtual keyboard impossible to hit. Passing calibration values to the kernel didn't seem to fix anything, but it's possible I was using them the wrong way...
i have the same kind of problem on my Kaiser... i think its realted to hardware... either the housing or the digitizer...
I am experiencing the same problem on X10 mini pro. the same screen spot exactly, i have to try very hard to get z or x or shift to work. Sometimes when I try locking the screen and unlocking it back, it works.
update
so after a very long time with this problem i decided to change the digitizer and problem is gonne. visualy the broken digitizer had nothing wrong with it. The fix was fairly easy though, there is no glued parts involved into getting a new digitizer on the u20i.
Touch Screen
I just bought a brand new Cubot One and it looks more than perfect! It has just a little problem with the touch screen ( I think its the software, need ROM change). There is a dead line on the right side of the screen that touch doesn't work at all. Any solutions? Anyone faced that before? Can I fix it myself or do I have to send it back for replacement? Is there any video or guide that shows its done?
I uploaded a video on YouTube to show the problem but i cant post it yet.. (new member)
You can write "Cubot One touch screen problem" and it's the 1st one.
Thank You!
Hello lovely people of XDA.
Both my wife and me have the Z1, i for my part have experienced screen self cracking and now she is experiencing touch malfunction.
It acts out from time to time, making typing a pain in the a** and playing games even more dificult.
F.ex. if she presses the F key, it registers the D etc.
Ive made a video of this availible here:
http://youtu.be/McGnrGfVpq8 (Sorry about the music, but there was too mutch background noise).
This happens on the home screen, during Candy Crush(yeah i know) and during texting.
Ive repaired the phone twice(previous and newest firmware) via Sony PC Software and still its no good.
It even acted out on the first boot.
Has anyone ever seen anything like this?
Can't seem too find any solution.
CreeVal said:
Hello lovely people of XDA.
Both my wife and me have the Z1, i for my part have experienced screen self cracking and now she is experiencing touch malfunction.
It acts out from time to time, making typing a pain in the a** and playing games even more dificult.
F.ex. if she presses the F key, it registers the D etc.
Ive made a video of this availible here:
http://youtu.be/McGnrGfVpq8 (Sorry about the music, but there was too mutch background noise).
This happens on the home screen, during Candy Crush(yeah i know) and during texting.
Ive repaired the phone twice(previous and newest firmware) via Sony PC Software and still its no good.
It even acted out on the first boot.
Has anyone ever seen anything like this?
Can't seem too find any solution.
Click to expand...
Click to collapse
Theres a well documented thread about touchscreen issues, I myself was one of the people it affected, your problem sounds slightly different.
The method to test was put the phone on a flat surface and make contact with the screen, move around and if you notice a break in contact then you more than likely have the bug.
Holding the metal frame of the phone in your hand eradicated the issue for some (me included) but it was certainly a pain.
My problem went away on it's own but some weren't so lucky.
Have a search for the thread in here, it's more than likely still active.
If nothing helps from that thread then it's more than likely a case of doing a warranty repair. (if it's the same issue)
Hello there and thank you for your reply.
As it seems to me there has been no solution to the problem, ive tried holding the phone without a case and the problem persist.
People are talking about the new update fixing it, but ive tried both updating and reseting the phone so that did not do anything.
It seems like the only thing to do is to send it in for a warranty repair.
With my self cracking the workshop told me that some of the frames where faulty placed in the factory and therefore might crack the screen after a long time under pressure.
Perhaps this is related somehow, though it feels and looks like a software bug.
Thank you for your reply, i'll be sure to keep a look out on that thread. (i found it now, but i could not find it before i posted this :S)
Thanks again
The kitkat update was rumored to remedy these touch screen issues. Have you updated? My C6906 was giving me occasional touch screen issues but they are non-existent after updating.
Sent from my C6906 using XDA Premium 4 mobile app
Yes i have installed Kit Kat, seemed to help at first but started acting out again the same day.
I even did a factory reset with newest firmware downloaded through PC Companion.
I'll keep looking around and post my findings.(If any)
Update:
So we both sent our phones to the service center and sold them right afterwards. Could not find a solution for the problem and the service center ended up replacing my handset and my wifes screen.
I now have a Nexus 6(it's so fantastic!) and she has an iPhone6 plus(Blaaarh...)...