Related
Hi all
I had to wipe my phone in custom recovery.
I wanted to flash it with RSD lite, as a lot of time, and i can't get it detected by my computer
I search to install drivers (wtf, they were on the computer..?!) and failed.
I gone to the configuration panel in my computer and uninstalled adb drivers
The i got "Fastboot smi S" drivers trying to install, failed too
I uninstalled moto drivers and reinstalled with the file Motorola_End_User_Driver_Installation_5.9.0_64bit.msi
rebooted
same problem...
i dont know how to make this fastboot mode detected again ....
Thx for help!
I had the same problem 2month ago with windows 8.
Instal sdk tools if you don't do that before or if it's always not working use an other computer because it's just a driver bug.
Sent from my XT890 using xda premium u
PELLET Nolwenn said:
I had the same problem 2month ago with windows 8.
Instal sdk tools if you don't do that before or if it's always not working use an other computer because it's just a driver bug.
Sent from my XT890 using xda premium u
Click to expand...
Click to collapse
hi
i tried to reinstall sdk, didnt worked.
i finally restored the computer to a prior date, like 3/4 days ago it was working, and i have been able to flash the rom with RSD
fabulous69 said:
hi
i tried to reinstall sdk, didnt worked.
i finally restored the computer to a prior date, like 3/4 days ago it was working, and i have been able to flash the rom with RSD
Click to expand...
Click to collapse
Just had the same kind of problem on Window 7 after playing with fastboot mode and various tools, this is how I solved it:
My XT890 in fastboot mode was recognized as "Unkown device"
=> I uninstalled the driver for this device.
My XT890 was thenidentified as "fastboot smi s" and would not install whatever I did
=> uninstalled "Motorola Device Manager" and "Motorola Mobile Drivers Installation 6.3.0"
=> reinstalled Motorola Device Manager (get it there : motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481 , sorry new users cant post links)
then I plugged back my phone in fastboot mode and Windows correctly installed the drivers
dont have the phone anymore, but thx for sharing your experience, might be useful if anybody meets this problem again in the future.
have a nice week.
hello, i have a probleme with my usb in fastboot mode. out of the fastboot ,usb is working but in fastboot the pc cannot connect to phone. fastboot usb is write but impossible to find phone with exploreur Windows or sdk... can you help me please and thank for your job .
absynte said:
hello, i have a probleme with my usb in fastboot mode. out of the fastboot ,usb is working but in fastboot the pc cannot connect to phone. fastboot usb is write but impossible to find phone with exploreur Windows or sdk... can you help me please and thank for your job .
Click to expand...
Click to collapse
Have you ticked the USB debugging in Developer options ?
USB problem
philos64 said:
Have you ticked the USB debugging in Developer options ?
Click to expand...
Click to collapse
yes,i have tried with and without.
Are you in fastboot on your phone?
USB problem
yes,sure. fastboot/power/ fastboot usb ,driver ok but nothing happened. and maybe i'm wrong but in fastboot usb mode ,debuging or not doesn't change anything ?
i have try to relock and re-unlock , with sdk , no differences.
i have (maybe problem causes) try to flash with sdk htc1recovery.img,flash ok but it cannot works.
before,i have use revone.bin utility with sdk, s-off ok ,i have just tried one time.
i have tried too usb driver compilation from xda. same problem...
my phone is debrande and no tampered
model 801n. -203
hboot 1.44.0000
absynte said:
yes,sure. fastboot/power/ fastboot usb ,driver ok but nothing happened
Click to expand...
Click to collapse
what happens when you command
Code:
fastboot devices
?
Try another usb port, sometimes that helps.
USB problem
gee2012 said:
Try another usb port, sometimes that helps.
Click to expand...
Click to collapse
allready done...
USB problem
redbull123 said:
what happens when you command
Code:
fastboot devices
?
Click to expand...
Click to collapse
"no device detected" ... i will try again but at the moment my old pentium P4 is ko RIP ,my 9years old computer crash out 2 days ago :-$ i wait for my new configuration . Now i have no computer
My phone unsuddenly bricked after I reboot my phone.Can't even boot into recovery cause Sony logo appear for a second and turned off.My phone even don't charge.I tried to flash stock rom via flashtool but phone not detected or after pressing vol down button nothing happened.I also tryed to use fastboot mode to flash boot.img but nothing happened though My phone can turn into fastboot mode.What should I do now?Senior XDA members please help.:crying:
Edit:how can i fix adb "device not found" issue?I installed all the necessary drivers but still not solved. Can't flash stock rom because vol down button not working but the button is fine.
Edit2:How can I fix adb driver issue that not recognizing my phone?
Problem solved!
Maybe died flash boot
Chum.zuizui said:
Maybe died flash boot
Click to expand...
Click to collapse
So is that mean my phone hard bricked?
Røbin said:
So is that mean my phone hard bricked?
Click to expand...
Click to collapse
Yes.i think so
Chum.zuizui said:
Yes.i think so
Click to expand...
Click to collapse
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Røbin said:
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Click to expand...
Click to collapse
Yes.good luck for you
hagar006 said:
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Click to expand...
Click to collapse
ZR driver exist in Sony developer website and I installed the driver but I don't know why my computer not recognizing my phone.My phone can turn into fastboot mode(blue light on when pressing vol up and connecting cable to pc) but when I type command "adb devices" the listed device is empty I mean no adb fastboot device found.I'm just asking the drivers are not working beacuse of windos 10?Actually when after I use custom rom I couldn't connect my phone to pc.So any driver can fix this problem?I searched really hard on google but couldn't find any proper sloutions.
Chum.zuizui said:
Yes.good luck for you
Click to expand...
Click to collapse
This isn't helping!
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
hagar006 said:
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
Click to expand...
Click to collapse
I know you are trying to help me but I tried everything and nothing is working.I installed driver from flashtool but still no clue why pc not recognizing my phone.My phone is like a live junk.My phone soft bricked many times and I could recover my phone with flashtool so I know what to do but this problem is way more confusing.I just need to know what is causing this issue.
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
hagar006 said:
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
Click to expand...
Click to collapse
Flashtool is the best tool to recover soft bricked phone I know but this problem is way more complicated.
Thanks that you tried to help me.I hope I'll figure it out some time later.
Røbin said:
This isn't helping!
Click to expand...
Click to collapse
I dont meant it like that .did you fix it
Chum.zuizui said:
I dont meant it like that .did you fix it
Click to expand...
Click to collapse
Unfortunately no.For some reason pc not detecting fastboot device even after I installed fastboot driver.
same problem plz help
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
pralay445 said:
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
Click to expand...
Click to collapse
My problem was created because local charger damaged my phone battery.So I couldn't turn on my device like yours.I replaced the battery and charger from Sony Center and now my phone is good as new.So Try to use other good battery(small or similer size that suites to your phone's battery pin)and see if your phone turns on without any issue.Then you can target the problem.
Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Click to expand...
Click to collapse
Where is the problem? I've tried with 2 different cables and 2 different computers
Ceranzuo said:
Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Where is the problem? I've tried with 2 different cables and 2 different computers
Click to expand...
Click to collapse
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
If you are already doing that or the problem still persists and have an unlocked bootloader(which I am sure you have), try to flash twrp manually.
muradulislam said:
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
Click to expand...
Click to collapse
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.
Ceranzuo said:
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.
Click to expand...
Click to collapse
Vol down+power should boot into fastboot. Turn off the phone, hold both until honor logo shows up, let go of power but hold vol down for about 5 sec more.
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
If it can not boot into bootloader still, the last is to try adb but that is a bit lengthy.
In bootloader mode, it will be written on phone screen in red whether phone is locked, unlocked or relocked.
Wipe does not effect bootloader status so it's still unlocked imo.
muradulislam said:
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
Click to expand...
Click to collapse
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse
Ceranzuo said:
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse
It did not say anything about phone unlocked in red?
muradulislam said:
It did not say anything about phone unlocked in red?
Click to expand...
Click to collapse
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2
Ceranzuo said:
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2
Click to expand...
Click to collapse
At least it should say, phone locked. Saying nothing is a phenomenon i never heard before but I usually go for newer versions. May be that's the case.
Anyways use adb to fire this command
Fastboot OEM device-info
To be sure if its locked or not.
To setup adb, download and install latest Android SDK, run the program and only download platform-tools.
Your phone is international variant and it came with locked bootloader, I am sure sp tools unlocked it coz otherwise CWM could not be flashed.
Right click platform-tools folder and select run command prompt window here and type the above command
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
And try to reboot into recovery after disconnecting from pc and simultaneously holding power+ Vol up.
edit: nevermind, i forghot about something...
muradulislam said:
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Should I do this when my phone is switched off?
Ceranzuo said:
Should I do this when my phone is connected to pc or not? Switched off?
Click to expand...
Click to collapse
When your phone is connected to your pc in fastboot mode.
Lemme know how did it go, will reply back in the morning. Hope everything works fine for you.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
When your phone is connected to your pc in fastboot mode.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
Click to expand...
Click to collapse
after this I reboot into recovery mode, but there is still CWM, not TWRP
Ceranzuo said:
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
after this I reboot into recovery mode, but there is still CWM, not TWRP
Click to expand...
Click to collapse
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs
muradulislam said:
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
I have already installed many drivers from different sites. I will try with hisuite
Ceranzuo said:
I have already installed many drivers from different sites. I will try with hisuite
Click to expand...
Click to collapse
Hisuite is the best option. Even if that does not work (there is a chance of that), Google Kouch's universal drivers and install those.
May have to manually install dribers if nothing works.
Lemme know how did it go. Will get back to you in the morning if nobody else came along (but someone surely will before that).
Have a nice day/night depending on your time zone
Sent from my PLK-L01 using XDA Labs
---------- Post added at 07:41 PM ---------- Previous post was at 07:31 PM ----------
Lemme get my teacher for you
@DigiGoon
Sent from my PLK-L01 using XDA Labs
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
I was awake just for your post. I think I got the problem. You need fastboot drivers imo but I would have to read a bit before I can suggest how to go about it.
Am busy tomorrow but will try to get back to you in the evening (GMT+5 time zone).
Can never be 100% sure but still I am confident, your problem has a solution. Just bear with me a day or two
Sent from my PLK-L01 using XDA Labs
Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
And I must ask: Are you able to do any operations on device via PC after connecting it?
DigiGoon said:
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
Click to expand...
Click to collapse
I did it and it says some number and recovery
DigiGoon said:
And I must ask: Are you able to do any operations on device via PC after connecting it?
Click to expand...
Click to collapse
In "usb storage media" or something like that? Yes, I do.
Ceranzuo said:
I did it and it says some number and recovery
Click to expand...
Click to collapse
Okay, then it means that there is no problem in the connection. You are using SP Flash tool in which mode?
Sent from my PLK-L01 using Tapatalk
My device is H811 running 10N version (rooted), but I'm unable to update it using because it won't be detected once it goes into fastboot or download mode. I have tried many drivers, and different PCs (running different OS, Windows 10, 8.1, 7) but still can't get it to works. Is there something I'm missing?
zenkhas said:
My device is H811 running 10N version (rooted), but I'm unable to update it using because it won't be detected once it goes into fastboot or download mode. I have tried many drivers, and different PCs (running different OS, Windows 10, 8.1, 7) but still can't get it to works. Is there something I'm missing?
Click to expand...
Click to collapse
first of all. update what.??
raptorddd said:
first of all. update what.??
Click to expand...
Click to collapse
I want to update it to Marshmalllow 20i or later.
zenkhas said:
I want to update it to Marshmalllow 20i or later.
Click to expand...
Click to collapse
have you tried lgbridge..
i doesnt detect phone at all.?
you have both of this drivers http://www.mediafire.com/file/k6ozyesitcqbkdr/driverslg.zip
usb 2.0 ? if nothing else works .. i can only think of format pc.. install drivers.. have windows update on in case it doesnt find drivers.. wait for it to install all drivers first time you connect phone.. or maybe bad usb port in phone .??
raptorddd said:
have you tried lgbridge..
i doesnt detect phone at all.?
you have both of this drivers http://www.mediafire.com/file/k6ozyesitcqbkdr/driverslg.zip
usb 2.0 ? if nothing else works .. i can only think of format pc.. install drivers.. have windows update on in case it doesnt find drivers.. wait for it to install all drivers first time you connect phone.. or maybe bad usb port in phone .??
Click to expand...
Click to collapse
No it doesn't. LG Up detects it when phone is On, but when LG Up restarts the device in fastboot, it says no devices connected, even when drivers are installed. Yes, the USB port is 2.0, and it can't be problem with port of phone since it is detected in normal mode. I will try these drivers and let you know if it works. Thank you
zenkhas said:
No it doesn't. LG Up detects it when phone is On, but when LG Up restarts the device in fastboot, it says no devices connected, even when drivers are installed. Yes, the USB port is 2.0, and it can't be problem with port of phone since it is detected in normal mode. I will try these drivers and let you know if it works. Thank you
Click to expand...
Click to collapse
LGUP and fastboot.??? what you talking about.?
turn off phone. then press vol up and plug you usb cable. it should take you to download mode and open LGUP it takes a while for connection sbut less then a minute..
raptorddd said:
LGUP and fastboot.??? what you talking about.?
turn off phone. then press vol up and plug you usb cable. it should take you to download mode and open LGUP it takes a while for connection sbut less then a minute..
Click to expand...
Click to collapse
Okay, that's the problem actually. I was confused between fastboot and download mode. When I press volume up and connect the cable it boots into fastboot mode instead of download mode. What could be the problem?
BTW here is the log from fastboot mode:
usb_error();transaction failed.txn_status = -1
usb_read(); DONE. ERROR. len 64
SECURE BOOT: DISABLED
LOCK STATE: LOCKED
zenkhas said:
Okay, that's the problem actually. I was confused between fastboot and download mode. When I press volume up and connect the cable it boots into fastboot mode instead of download mode. What could be the problem?
BTW here is the log from fastboot mode:
usb_error();transaction failed.txn_status = -1
usb_read(); DONE. ERROR. len 64
SECURE BOOT: DISABLED
LOCK STATE: LOCKED
Click to expand...
Click to collapse
am not good at readings of finding error i just suggestion why i think it might be..
can you do a factory reset.? can you try again to go into download mode.. maybe use an app that has download mode recovery mode one click on phone to take you there.?
its weird .. something not right when vol up and connect usb.. doenload mode should pop up. with screen showing usb icon.
I had the same exact problem for 6 hrs yesterday and i came across your thread and the problem is when you do adb reboot bootloader, and your phone doesn't show up on your pc under 'Computer management > devices', the driver says unsupported, follow this video starting around 4:50, you'll find all the drivers that way and it'll work right away
nkia2sg said:
I had the same exact problem for 6 hrs yesterday and i came across your thread and the problem is when you do adb reboot bootloader, and your phone doesn't show up on your pc under 'Computer management > devices', the driver says unsupported, follow this video starting around 4:50, you'll find all the drivers that way and it'll work right away
Click to expand...
Click to collapse
What video?