Please, oh please, make a soft touch battery door. - Nexus S Accessories

The NS looks slick as hell naked, no question there. But I'm terrified to set the thing down because the back is so glossy and plasticity. Hope somebody makes a nice rubberized door for it like the EVO has. Because I HATE cases.

Ditto.... I already have a few small scratches

Get some rubberized stain spray paint from lowes/home depot.
Sand, spray, enjoy.

JCopernicus said:
Get some rubberized stain spray paint from lowes/home depot.
Sand, spray, enjoy.
Click to expand...
Click to collapse
I kinda meant something that DOESN'T look like a DIY POS.

thefoss said:
I kinda meant something that DOESN'T look like a DIY POS.
Click to expand...
Click to collapse
Haha, no ****.

thefoss said:
I kinda meant something that DOESN'T look like a DIY POS.
Click to expand...
Click to collapse
If you can't handle a spray can properly, that's kinda depressing.

This is actually not a bad idea. You could use Plasti-dip for this. Just spray the 1st coat. Let it dry than spray another. I say spray about 4 coats and once its dry it will be matte black in color and provide you a nice grip and the best thing is that it will peel right off cause it dries as plastic!. I might actually do this. I have a few can's left from using on my car. (Available at Home Depot and probably lowes)

JCopernicus said:
If you can't handle a spray can properly, that's kinda depressing.
Click to expand...
Click to collapse
Even if you spray it evenly, the resulting back cover will not be flush with the rest of the phone. Do you have any pictures of a DIY job that looks good? I know people have tried with the other Galaxy S phones (Captivate excluded) but I haven't seen any that look that good IMO.

The back will cost 5-10$ to replace... Don't worry so much

pgibbons said:
Even if you spray it evenly, the resulting back cover will not be flush with the rest of the phone. Do you have any pictures of a DIY job that looks good? I know people have tried with the other Galaxy S phones (Captivate excluded) but I haven't seen any that look that good IMO.
Click to expand...
Click to collapse
It's spray paint not body filler.

JCopernicus said:
It's spray paint not body filler.
Click to expand...
Click to collapse
Obviously, but have you seen pictures where it didn't look like a DIY POS like the person said? You end up having a nice phone with an ugly back cover that is not flush with the sides of the phone. If you have seen a good DIY job, show some pics like I said so we can see what it looks like. What is acceptable looking to you may not be to others.

The PlastiDip looks quite nice, and I am very picky. I also like the grip. The stock case is ugly...too glossy, a fingerprint magnet, and slippery to the point where I nearly drop the phone.
My Nexus S is currently my only camera so I can't post any decent photos of the completed cover on the phone, but I'll post some later when my girlfriend gets home. I'm sure the majority of you will be pleasantly surprised at the results.
Here's a shot I took after applying the second coat.

Anderdroid said:
The back will cost 5-10$ to replace... Don't worry so much
Click to expand...
Click to collapse
It's gonna cost a little more than $5. The Nexus S has a NFC antenna molded into the rear cover, along with some connection points that allow it to interface with the phone.
I doubt that you could find a back for a SGS for $5, much less a NS.
My $.02

tech338 said:
It's gonna cost a little more than $5. The Nexus S has a NFC antenna molded into the rear cover, along with some connection points that allow it to interface with the phone.
I doubt that you could find a back for a SGS for $5, much less a NS.
My $.02
Click to expand...
Click to collapse
Yes I did notice that chip as well....

tech338 said:
It's gonna cost a little more than $5. The Nexus S has a NFC antenna molded into the rear cover, along with some connection points that allow it to interface with the phone.
I doubt that you could find a back for a SGS for $5, much less a NS.
My $.02
Click to expand...
Click to collapse
It's not molded in, it's an printed circuit on an vinyl base with adhesive, that is stuck to the inside of the cover.
Also NFC/RFID are dirt cheap to produce.

mhaedo said:
The PlastiDip looks quite nice, and I am very picky. I also like the grip. The stock case is ugly...too glossy, a fingerprint magnet, and slippery to the point where I nearly drop the phone.
My Nexus S is currently my only camera so I can't post any decent photos of the completed cover on the phone, but I'll post some later when my girlfriend gets home. I'm sure the majority of you will be pleasantly surprised at the results.
Here's a shot I took after applying the second coat.
Click to expand...
Click to collapse
Looking forward to seeing the final pictures. I will probably end up trying the PlastiDip route if it looks okay. Did you have to do anything to prep the cover before you sprayed it like sanding?

pgibbons said:
Looking forward to seeing the final pictures. I will probably end up trying the PlastiDip route if it looks okay. Did you have to do anything to prep the cover before you sprayed it like sanding?
Click to expand...
Click to collapse
No prep. Just four carefully applied thin coats. It's completely dry now and I'm VERY happy with the results. Pictures within the hour.

This actually looks amazingly nice. What did you use?

zachthemaster said:
This actually looks amazingly nice. What did you use?
Click to expand...
Click to collapse
Thanks
http://forum.xda-developers.com/showthread.php?t=881062

mhaedo said:
Thanks
http://forum.xda-developers.com/showthread.php?t=881062
Click to expand...
Click to collapse
Thanks for sharing the pictures. It looks better than I thought a DIY job would. Nice.

Related

Matte battery cover?

Hi guys,
I've seen the DIY project which is a pretty decent looking alternative but I was wondering if anyone has seen an actual Matte Battery Door yet? It'd be cool to have one like the Epic 4G's which still said Google on the back. (I think the Google looks oddly classy )
My searches have come up kinda empty so thought I'd ask.
Mini rant.... WHY?! WHY???! Is the back cover so prone to scratches.. it been only a week and a half or so and already I've seen scratches developing, in fact another happened just today.. it's really the one and only thing I don't like about it.. not sure what they were thinking..
Well if anybody has seen alternatives please let me know!
Thanks!
There is the Invisible shield Dry which is a matte back protector for it. It looks pretty sleek.
Sent from my Nexus S 4G using XDA App
N00bsploder101 said:
There is the Invisible shield Dry which is a matte back protector for it. It looks pretty sleek.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
URL?
10 chars
Plasti Dip it
you can get the invisibleshield dry from any of the sprint stores-- it's all they carry.
if you get the invisibleshield from ZAGG, they send the "wet" version, which is the cover everyone's used to.
the dry version is matte, and thinner, and doesn't use spray/sponge/liquid. it's not as "tacky" or sticky as the wet version, and you can still clearly see the google/samsung logo.
just be real sure to follow the instructions, squeegee from the center out, and give it a couple of days to fully cure. i saw a bunch of micro bubbles and what look like flaws after applications, and it looked like the dry shield didn't fully seal around the tiny dots on the cover, but after a couple of days it was perfectly sealed in. don't squeegee too hard, especially around the curves. it'll stick, and give it a day or two.
pretty happy with it, and it comes with the regular clear/tacky/sticky front shield, too, which is also applied dry. i found the squeegee to be a bit too stiff, and it's easy to dent and stretch the shield when squeegeeing it out.
ZAGG says to keep the device off, cuz the heat or something will affect curing. i just left mine on after application, and everything is perfect. there's orange peel, but it's minimal. no problems with touch sensitivity, and if anything i think it's better because fingerprints and oil don't show up.
i wonder if it's even worth shielding the front, though. i have an old blackberry that had nothing on it, and the screen i think is plastic, and i treated it like crap. no scratches.
but yeah, just go to a sprint store. they have em. best buy around here only sells the front shield. i prefer the dry matte back because it's thinner, and still does a good job.
fyi: ZAGG's guarantee and return policy are top notch. registering on their site is simple, and they'll ship out a replacement pretty quickly, and you just mail back your old shield as proof. they don't care what condition it's in. before i just ripped off an old shield and slapped it on a piece of paper.
spiicytuna said:
URL?
10 chars
Click to expand...
Click to collapse
Its Phantom Skins that sells it.....
So the Nexus S still doesn't have any third party back covers or battery doors? I can't stand the shiny plastic back. All I see on ebay are oem battery doors that are the same thing. Don't want to use a sticker/shield or dip.
silverwolf0 said:
So the Nexus S still doesn't have any third party back covers or battery doors? I can't stand the shiny plastic back. All I see on ebay are oem battery doors that are the same thing. Don't want to use a sticker/shield or dip.
Click to expand...
Click to collapse
I imagine that is because of the NFC that there aren't any replacement doors.
Backcover
lembowski said:
I imagine that is because of the NFC that there aren't any replacement doors.
Click to expand...
Click to collapse
Correct.
The white version of the Nexus S actually has a very nice textured back on it. I wanted the white color to begin with but after seeing (and feeling) the difference between the backplate on the black version versus the white version, I much prefer the white one. The black one has no grip to it and, like the OP said, it scratches way too easily.
Yeah I thought about the zagg body shield but they unfortunately only had the screen. I decided to grab the wet one instead and I've never had better luck applying a screen protector.. heh the "wetness" really makes it easy to get the bubbles out and it cures awesome.
As for the battery cover.. it's already got a few scratches, but on top of that in the lower left corner it doesn't seem to snap in very securely, even in general use when tapping on the lower left part of the phone you can feel the battery door.. "click" a little bit as if its not latched properly, it makes a audible click sound as well.
I resolved this issue by putting a very thin strip of scotch tape on the inside of the door along the edge which produces just enough pressure to keep the clicking from happening and it feels more secure. (No you can't see it )
SO I'll probably just buy a new battery door eventually and use a body shield.. hopefully the new one will latch a bit more securely as well. It's not a big big deal, and the DIY fix by me is definitely just me nitpicking the tiny click feeling but still.. I think Samsung makes good products most of the time but they really should step up the build quality a little bit.
Thanks for the suggestions though guys
Actually I think I'm going to try the plasti dip on the existing cover to.. I could see that helping the latch as well because it would be just the tiniest bit thicker it would seem.
ranphi said:
The white version of the Nexus S actually has a very nice textured back on it. I wanted the white color to begin with but after seeing (and feeling) the difference between the backplate on the black version versus the white version, I much prefer the white one. The black one has no grip to it and, like the OP said, it scratches way too easily.
Click to expand...
Click to collapse
Is there any black replacement cover with a similar structure available?
im very interested in this too. if there could be a htc style back door id be very happy
ca509 said:
Is there any black replacement cover with a similar structure available?
Click to expand...
Click to collapse
Not that I am aware of, sorry.

Luxury Flip Leather Case Cover Review w/ Video

Hey guys! Made a quick video review of a new case I just got in today. It's like Samsung's Flip Case, but with some added protection and a magnet that keeps it from moving and opening up when you don't want it to. Definitely recommend it!
Sorry for the random black spots during transitions, still new to this! I also need a DSLR camera and better tripod, haha.
http://www.youtube.com/watch?v=6RE9uU_tflM&feature=youtu.be
Yes, was thinking about this. Love my current Samsung Flip case but the lack of corner drop protection does make me a bit paranoid. I really wish someone made a case like this with a kickstand.
mitchellvii said:
Yes, was thinking about this. Love my current Samsung Flip case but the lack of corner drop protection does make me a bit paranoid. I really wish someone made a case like this with a kickstand.
Click to expand...
Click to collapse
Exactly why I got this! And it'd be nice if it had like, grooves/pivots in the the case too to prop it up like Smart covers and my Nexus 7 cover.
Benjamin150 said:
Exactly why I got this! And it'd be nice if it had like, grooves/pivots in the the case too to prop it up like Smart covers and my Nexus 7 cover.
Click to expand...
Click to collapse
Does the back feel cheap at all? I'm kind of a branding snob. Does the generic look take away from the quality? How does the hinge hold up when you fold the top back? Does it fold back completely and easily?
Does the magnet cause s pen issues?
Sent from my SPH-L900 using Tapatalk 2
Thanks for posting... did you buy this off amazon? Ebay? Links? Also, (as post above) does the magnet (center right location) interfere with spen writing in that area of the screen? Thx
mitchellvii said:
Does the back feel cheap at all? I'm kind of a branding snob. Does the generic look take away from the quality? How does the hinge hold up when you fold the top back? Does it fold back completely and easily?
Does the magnet cause s pen issues?
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Doesn't feel cheap at at all, the phone looks even better in my personal opinion when it's closed, holds up well and doesn't bother me at all either while typing.
DoctorQMM said:
Thanks for posting... did you buy this off amazon? Ebay? Links? Also, (as post above) does the magnet (center right location) interfere with spen writing in that area of the screen? Thx
Click to expand...
Click to collapse
Nope, the magnet is to the side of the screen, so no interference at all. And the link to do the case is in the info on youtube. Just click to expand. I'll post it on here soon, too.
One issue, though, is it can be a bit difficult to grab the Spen, so if you use it often, that could be an annoyance.
Sent from my SCH-I605 using Tapatalk 2
I have exactly the same case, but I would not call it luxury, either from the price (I paid $7 on ebay) or the quality.
OP's case does looks nicer and more premium than my similar case, mine even has Samsung on the metal magnet clip on the cover, but looks and feels like total crap, tossed it to the trash can as soon as I got it.
I'm currently waiting for Amigo flip case, looks super nice from the pic, no magnet though.
x2h said:
I have exactly the same case, but I would not call it luxury, either from the price (I paid $7 on ebay) or the quality.
Click to expand...
Click to collapse
There's a few other listings of "luxury" cases
that look similar but aren't the same. If it I'd the same though, I guess it could be a matter of personal preference? I personally love the soft, textured feel of the case. Feels quite nice to hold.
Vanquiz said:
OP's case does looks nicer and more premium than my similar case, mine even has Samsung on the metal magnet clip on the cover, but looks and feels like total crap, tossed it to the trash can as soon as I got it.
I'm currently waiting for Amigo flip case, looks super nice from the pic, no magnet though.
Click to expand...
Click to collapse
The only complaint with the magnet I have is that it's blue, lol. Figured it'd match the rest. Luckily it's my favorite color.
Let me know how that case goes! I'm purchasing a couple more myself(different cases).
Sent from my SCH-I605 using Tapatalk 2
Benjamin150 said:
The only complaint with the magnet I have is that it's blue, lol. Figured it'd match the rest. Luckily it's my favorite color.
Let me know how that case goes! I'm purchasing a couple more myself(different cases).
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I have the same case as the OP and didn't notice until watching his video that the blue on the latch is only protective tape. I peeled it off and now it's a nice stainless/chrome look.
I can only grab the S-Pen with my little fingernail, but it should be easy enough to cut/file/Dremel the slot a little bigger if it's enough of a problem.
JimSmith94 said:
I have the same case as the OP and didn't notice until watching his video that the blue on the latch is only protective tape. I peeled it off and now it's a nice stainless/chrome look.
I can only grab the S-Pen with my little fingernail, but it should be easy enough to cut/file/Dremel the slot a little bigger if it's enough of a problem.
Click to expand...
Click to collapse
Haha nice! I'll have to do the same, I didn't notice that either.
And yeah, I use my pinky nail to get it out.
Sent from my SCH-I605 using Tapatalk 2
Benjamin150 said:
Hey guys! Made a quick video review of a new case I just got in today. It's like Samsung's Flip Case, but with some added protection and a magnet that keeps it from moving and opening up when you don't want it to. Definitely recommend it!
Click to expand...
Click to collapse
Useful review. Case looks nice, but sadly, once again they forgot to have a cutout for the notification LED. I'd also prefer cutouts for better access to the volume buttons, as I use those a lot as shortcuts and when playing audio (with cases closed).
Most (or all cases ignore this however, especially the LED hole). And it should have a larger SPen cutout like this one. But looks ok for the price.
Beowulf_pt said:
Useful review. Case looks nice, but sadly, once again they forgot to have a cutout for the notification LED. I'd also prefer cutouts for better access to the volume buttons, as I use those a lot as shortcuts and when playing audio (which cases closed).
Most (or all cases ignore this however, especially the LED hole). And it should have a larger SPen cutout like this one. But looks ok for the price.
Click to expand...
Click to collapse
I agree, having that would be very nice. I may have my dad just got one out himself, actually. I mean sometimes its nice cause I don't always like to see if I have a notification, but for that I could just turn the case over. And with the cover I wouldn't have to worry about getting any scratches.
Sent from my Nexus 7 using Tapatalk HD
Quick question to the OP and the other person who owns this case. What type of corner protection does this offer? What material is used for the part that holds onto the phone? Is it a hard plastic like PC or is it a softer Silicone/TPU type material?
JohnnyRocks said:
Quick question to the OP and the other person who owns this case. What type of corner protection does this offer? What material is used for the part that holds onto the phone? Is it a hard plastic like PC or is it a softer Silicone/TPU type material?
Click to expand...
Click to collapse
Mine is plain hard plastic. Part of one corner is gone due to a drop from less than two feet.
Owned this for 2 weeks until it started affecting the spen area around the magnet. no biggie if you dont use the spen just something to consider.

Brown Leather Back Peeling issue

So I got tired of seeing my Leather back on my phone peel more and more, day by day. It was just way too noticeable on the Brown leather (more like Orange-ish). So I decided to peel the entire top layer off and expose the Natural Leather underneath. In my opinion, it looks 100X better than what it did (but then again I am a BIG fan of the natural leather look, especially when it really starts to get used and worn, so...).
Let me know what you all think...
Looks pretty slick... going to pull mine off now.
mad1111 said:
So I got tired of seeing my Leather back on my phone peel more and more, day by day. It was just way too noticeable on the Brown leather (more like Orange-ish). So I decided to peel the entire top layer off and expose the Natural Leather underneath. In my opinion, it looks 100X better than what it did (but then again I am a BIG fan of the natural leather look, especially when it really starts to get used and worn, so...).
Let me know what you all think...
Click to expand...
Click to collapse
Mine is starting to peel as well. How did you get it to come off cleanly? When I go to pull it off, only little bits come up.
hdcp said:
Mine is starting to peel as well. How did you get it to come off cleanly? When I go to pull it off, only little bits come up.
Click to expand...
Click to collapse
I just used acetone and a rag. Go in one direction only tho...when you "scrub" back and forth it's actually harder to remove and can scuff up the leather underneath. I waited a few hours and then rubbed a very thin layer of lotion into the leather to help "seal" and re-moisturize it a bit. (It's best to use an actual leather sealer/moisturizer but I don't have any, so...)
Good luck, and post up pictures when you're done.
Wanted to thank you for plowing the way. Did the same as the peeling was driving me crazy.
Sent from my LG-H811 using Tapatalk
mrcrusha829 said:
Wanted to thank you for plowing the way. Did the same as the peeling was driving me crazy.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Looks way better, dont you agree?
mad1111 said:
Looks way better, dont you agree?
Click to expand...
Click to collapse
My is not peeling off yet. As soon it starts to peel off I'll do it to mine. I was thinking to buy the black leather back but now I'm not. Thank you
Why wasn't this an option at launch!
I put a clear case on to protect it thinking the leather was fake but i love this new look. Great work guys

Review- 5ive Aluminum Metal Case

Ordered this case after seeing it on amz traders, figured I would try it. Here's my amazon review.
Great protective case, honestly it's probably the most protective I have ever used. It includes a thick, seems to me, plastic screen protector that's glued in, has covers over all the ports and a swinging mechanism over the 3.5 jack. I have large hands and had to struggle a bit to remove the S-Pen but not horribly, the charging cover is a bit stiff requiring several attempts to get it open in order to charge the phone. I do not have wireless charging currently so couldn't test that.
The buttons all work properly, a bit stiff but imagine they will break in a bit over time. It takes a bit to get your phone in this case, 4 screws and several minutes, it is not a quick change case. You put it in this case when you know you'll need it, hiking, constriction work, biking etc.
Lastly is the weight, it's heavy. Double the weight of the phone heavy. With all that said, for a protective case you are not going to beat it, it's that solid. It sounds like I don't like the case but I do, I wouldn't call it an everyday day case with the weight but I am certain it would protect my phone in all conditions I could find myself in. I did not remove my tempered glass screen protector prior to putting it in the case which I am sure probably make things a bit tighter but most of my cases do not have one built in so I'll keep it on.
Link to amazon
I noticed the Amazon listing mentions a tempered glass screen protector but you said it's plastic.
Sziehr said:
I noticed the Amazon listing mentions a tempered glass screen protector but you said it's plastic.
Click to expand...
Click to collapse
Yeah, I think it's plastic tho. It's pretty thick, doesn't sound like glass when tapping my fingernail.
Holy crap that thing is ugly. Looks like it was take right from a Transformers movie. Why buy such a sleek and nice phone just to slap it with so much uglyness?
They might rule in advertising, but I would bet Spigen sells a lot more cases than Otterbox does. I see hardly anybody with an Otterbox, but people who do have them it is very obvious and noticeable because they're enormous and look absurd, especially large phones like the Note. It looks different than a normal case that most people have, which is why it's a conversation piece and people know the name. However, even with the size, at least Otterbox makes decent looking cases of high quality. This thing is fugly with those black accents and ugly 5ive logo printed on.
Is there even access to the s-pen?
Sent from my SM-N920S using Tapatalk
cajunaggie87 said:
Is there even access to the s-pen?
Sent from my SM-N920S using Tapatalk
Click to expand...
Click to collapse
Yes, the red lever thing swings open and allows access. Honestly, I sent it back to amazon. It just made the phone too heavy to actually use, intact it fell out of my hand because of the weight. It's a shame because it was definitely a change from the normal cases on the market.
flintston314 said:
Holy crap that thing is ugly. Looks like it was take right from a Transformers movie. Why buy such a sleek and nice phone just to slap it with so much uglyness?
Click to expand...
Click to collapse
LOL, I didn't mind the look so much as I wanted protection. I work in construction and welding, lost several phones to drops that normal cases just can't protect from.
Ducter said:
LOL, I didn't mind the look so much as I wanted protection. I work in construction and welding, lost several phones to drops that normal cases just can't protect from.
Click to expand...
Click to collapse
Thanks, that makes absolutely sense. I absolutely understand that for some users it is imperative to have protection and that looks are 100% secondary.
I just donĀ“t understand most people that pack their phones into such things while sitting at a desk the whole day.
In your case, 100% agree.
Ducter said:
Yeah, I think it's plastic tho. It's pretty thick, doesn't sound like glass when tapping my fingernail.
Click to expand...
Click to collapse
I ended up getting this case thru AMZ. I took a very sharp knife point to the screen protector and couldn't scratch it, so it may actually be glass.
I got this too, but haven't actually received it yet. shipped from china and its taking forever to get here!!

Anyone try Lens Screen Protector?

Seen some on ebay for $1-5. They cover just the lens. Past phones notice scratches on lens at the end of life. Guess wouldn't hurt to have one. Just curious if anybody ever used them before? Ordered one myself just now.
Yes, I've got a cheap one from AliExpress. In fact it was a pack of 5.
The problem I found with them is that the flash interferes with the camera when the protector is applied, and you get a washed out picture. I fixed this by trimming the protector so it doesn't cover the flash. That means that the flash isn't protected, but it isn't the end of the world if that area gets scratched.
I got a two pack off ebay, haven't noticed any issues with my picture quality and stuff. Though I don't think I've used flash yet so not sure if that's an issue.
StevePritchard said:
Yes, I've got a cheap one from AliExpress. In fact it was a pack of 5.
The problem I found with them is that the flash interferes with the camera when the protector is applied, and you get a washed out picture. I fixed this by trimming the protector so it doesn't cover the flash. That means that the flash isn't protected, but it isn't the end of the world if that area gets scratched.
Click to expand...
Click to collapse
Supposedly the one I am getting doesn't have that problem. Probably a lie and will probably have to do what you did. I am lil worried with it and cases. Did it fit fine with whatever you have? I have tech 21 hopefully fits fine.
deebs said:
I got a two pack off ebay, haven't noticed any issues with my picture quality and stuff. Though I don't think I've used flash yet so not sure if that's an issue.
Click to expand...
Click to collapse
Same question to you as above. Cases fit fine with them these lens protectors on?
I can't imagine them interfering with cases - mine is very thin, and only sits on the inner glass itself, and not the surrounding frame. No case will come close to touching it, in my opinion.
StevePritchard said:
I can't imagine them interfering with cases - mine is very thin, and only sits on the inner glass itself, and not the surrounding frame. No case will come close to touching it, in my opinion.
Click to expand...
Click to collapse
In case I do have to cut like you. Was it easy to do? Is it noticeable you cut it?
Nick216ohio said:
Supposedly the one I am getting doesn't have that problem. Probably a lie and will probably have to do what you did. I am lil worried with it and cases. Did it fit fine with whatever you have? I have tech 21 hopefully fits fine.
Same question to you as above. Cases fit fine with them these lens protectors on?
Click to expand...
Click to collapse
It fit fine for all my cases (Spigen Ultra Hybrid, Supacase Unicorn Beetle and Poetic Nubuck). Even a cheap chinese one from ebay that had a split cut out for the camera/flash and fingerprint holes.
Nick216ohio said:
In case I do have to cut like you. Was it easy to do? Is it noticeable you cut it?
Click to expand...
Click to collapse
Yeah, easy. Just used scissors. The only reason you can tell is that the corners aren't rounded where I cut.
StevePritchard said:
Yeah, easy. Just used scissors. The only reason you can tell is that the corners aren't rounded where I cut.
Click to expand...
Click to collapse
Going to follow suite. Will trace around with paper and pencil for better cut. Thanks for heads bro!
Degradates the photo quality for me.
Kawaisa said:
Degradates the photo quality for me.
Click to expand...
Click to collapse
In what way? Seems like different material in a lot of them. What did everyone here get material wise? Temper glass here.
Nick216ohio said:
In what way? Seems like different material in a lot of them. What did everyone here get material wise? Temper glass here.
Click to expand...
Click to collapse
Tempered glass. you're putting a piece of cheap uncoated glass on top of it...
Kawaisa said:
Tempered glass. you're putting a piece of cheap uncoated glass on top of it...
Click to expand...
Click to collapse
Crap hope I don't have your problem.
I wish there was one for the fingerprint scanner. That things is delicate as fudge to scratches!!!
Jammol said:
I wish there was one for the fingerprint scanner. That things is delicate as fudge to scratches!!!
Click to expand...
Click to collapse
Don't forget horrible position. One of the very few things Samsung did wrong on this phone.
Nick216ohio said:
Don't forget horrible position. One of the very few things Samsung did wrong on this phone.
Click to expand...
Click to collapse
Not that bad for me.
Jammol said:
Not that bad for me.
Click to expand...
Click to collapse
You left handed? Or got long fingers lol
Nick216ohio said:
Don't forget horrible position. One of the very few things Samsung did wrong on this phone.
Click to expand...
Click to collapse
I am right handed but hold phone on muy left hand. Sensor works great for me.
Nick216ohio said:
You left handed? Or got long fingers lol
Click to expand...
Click to collapse
I have tiny girly handa and I can unlock it with 1 hand no problem
Picture Quality
I've posted a couple pictures I took last month if you guys want to check it out for any degradation just because I don't have the best eyes to really tell if there is a difference. At the same time I'm pretty rubbish at taking photos.

Categories

Resources