At least with wifi,gps,bluetooth file sharing working &audio.
Camera & Video recording and google apps as well.
A2sd Integrated.
Anything else beyond that is a plus.
He does this on the HeroC forums too. He still doesn't get how deving works.
Wasn't it announced that 2.3 is too large to fit on the g1's memory? Froyo just barely fits...
Sent from my T-Mobile myTouch 3G Slide
they're working on it, heres a pretty stable port by ezterry: (No GPS yet)
http://forum.xda-developers.com/showthread.php?t=882356
add119 said:
At least with wifi,gps,bluetooth file sharing working &audio.
Camera & Video recording and google apps as well.
A2sd Integrated.
Anything else beyond that is a plus.
Click to expand...
Click to collapse
if you look in the g1 dev section you will see there are some full 2.3 roms there try them out and see if they fix for what you are looking for
there are about 3 gb roms are being developed in the G1 dev section
- ezGingerbread
- CM7 unofficial
- COS-DS
ezGingerbread works just fine. Use the ADS MagPie build. It can be found in AnDisa or Firerat's sig.
creezalird said:
there are about 3 gb roms are being developed in the G1 dev section
- ezGingerbread
- CM7 unofficial
- COS-DS
Click to expand...
Click to collapse
you forgot ginger yoshi lol that makes 4
Related
Is there a release of this ROM to flash on my Mytouch 3G 32a?
I wanted to test it out and make some modifications to it for educational purposes with my friend.
Also, a cliq too. Would that be possible to flash the same 2.2 ROM for two separate phones or would I need a special one for the two different phones.
Thanks.
Man, not this again. Wait until Android 2.2 gets on a phone officially.
Cyanogen can port it to the g1/mt3g (also the n1 and the droid) but for now all we got is android 2.1
You have to ask another dev to port it to the cliq since the cliq isn't really talked much about on xda.
UberMario said:
Man, not this again. Wait until Android 2.2 gets on a phone officially.
Cyanogen can port it to the g1/mt3g (also the n1 and the droid) but for now all we got is android 2.1
You have to ask another dev to port it to the cliq since the cliq isn't really talked much about on xda.
Click to expand...
Click to collapse
Thanks for your reply. I'll look into it. But I wasnt looking for a cyanogen release or any other ROM modification release. I wanted the Raw 2.2 file.
Cyanogen won't be releasing anything before its officially released.
http://twitter.com/cyanogen/status/14390399224
Click to expand...
Click to collapse
Wait for haykuro to release for g1. He is working on it now. Hope we'll get it soon
Benbuchacher's tweet:
ok so Froyo for the G1, everything working except wifi, full video drivers, opengl etc all working http://bit.ly/defcon #SuperF
about 7 hours ago via web
Click to expand...
Click to collapse
Even youtube is working fine!
Anyone tried this ?
http://forum.cyanogenmod.com/topic/...or-htc-hero-gsmcdma-alpha-preview-test0-0705/
thats for gsm hero
Sorry didn't catch that...
it's actually for both cdma and gsm. i guess they figured out they can just use a different kernel for each network. i believe darch has a newer version up on the froyolinks page avaliable in the irc
Read again.
CyanogenMod 6.0.0 for Htc Hero Gsm/Cdma Alpha Preview (test0 - 07/05)
It has
Additional mandatory kernel update for CDMA users
From reading the Froyo thread on the development side, it looks like there's plenty of work to be done.
Just wondered if anyone had tried Cyanogen yet on their Hero ?
grifforama said:
From reading the Froyo thread on the development side, it looks like there's plenty of work to be done.
Just wondered if anyone had tried Cyanogen yet on their Hero ?
Click to expand...
Click to collapse
I have darchdroid 2.7 and I am almost certain it is based of Cyanogen. I know Cyanogen themes work with it.
darch has been working on Froyo and according to what I've read on IRC is the lead dev on CM6 for the CDMA Hero. I am getting confused by the other projects that keep popping up, but darch knows what he's doing so I'm waiting on his Froyo to be final.
gunnyman said:
darch has been working on Froyo and according to what I've read on IRC is the lead dev on CM6 for the CDMA Hero. I am getting confused by the other projects that keep popping up, but darch knows what he's doing so I'm waiting on his Froyo to be final.
Click to expand...
Click to collapse
Cyanogen runs beautifully
What works/doesn't?
gunnyman said:
darch has been working on Froyo and according to what I've read on IRC is the lead dev on CM6 for the CDMA Hero. I am getting confused by the other projects that keep popping up, but darch knows what he's doing so I'm waiting on his Froyo to be final.
Click to expand...
Click to collapse
i was thinking the same thing....
gunnyman said:
What works/doesn't?
Click to expand...
Click to collapse
Since yesterday, native tethering and the preview with the camera, but you can download camera magic to fix that
gunnyman said:
darch has been working on Froyo and according to what I've read on IRC is the lead dev on CM6 for the CDMA Hero. I am getting confused by the other projects that keep popping up, but darch knows what he's doing so I'm waiting on his Froyo to be final.
Click to expand...
Click to collapse
gunnyman said:
What works/doesn't?
Click to expand...
Click to collapse
grifforama said:
From reading the Froyo thread on the development side, it looks like there's plenty of work to be done.
Just wondered if anyone had tried Cyanogen yet on their Hero ?
Click to expand...
Click to collapse
Weve had every cyanogen update since 2.2 has been released.. Join the hero-cdma IRC channel, its on the first page of the froyo thread in development. Darchstar is the main dev of the cdma hero and lox is the dev for gsm hero. They joined the 2 heros source. But yesterday Darch said he was separating the two do to some problems.
But cyanogen mod is very nice and very stable, almost all mods from cm 5 is ported over to 6 and more is added all the time. Also darch is adding, fixing and improving the rom almost daily. Everything works but the preview screen on the native camera app.. Use a 3rd party camera app and it works perfect.
There has only been 2 ppl to release a cdma 2.2 (since source), it was me and darch. But that was back when both of ours were based 100% off of google 2.2 source, and it was only because he stopped including JIT. Every other rom released has been from darch and he will be the only one to release them (they do include JIT, just off by default and its based on cyanogen mod).
OK.. First. After running this on my Pure, I could kick myself for not getting an android phone to begin with!
Now, my questions and queries..
1. Is there any version 2.1, 2.2 ..etc that has sound (external speaker, screen taps, music etc) working?
2. I played with 2.1 startups and etc and got everything to work essentially but the external sound. After I tried the latest 2.2 and rc1, which would hang on calls (only time I got it to load completely), I went back to 2.1, which hangs on calls now. So, my question is, is there a recommended setup for 2.1 on a Pure TOPA210?
3. The release notes say for rc1 the sound issues are fixed. I try to run it, and it freezes on creating data.img. There is a post describing using the image from 2.1, but that makes "panic", and none of the fixes in that post seem to work. So question is, any recommendations on setup for 2.2 on Pure TOPA210?
Really awesome thing y'all are doing here, BTW.
smoakeater said:
OK.. First. After running this on my Pure, I could kick myself for not getting an android phone to begin with!
Now, my questions and queries..
1. Is there any version 2.1, 2.2 ..etc that has sound (external speaker, screen taps, music etc) working?
2. I played with 2.1 startups and etc and got everything to work essentially but the external sound. After I tried the latest 2.2 and rc1, which would hang on calls (only time I got it to load completely), I went back to 2.1, which hangs on calls now. So, my question is, is there a recommended setup for 2.1 on a Pure TOPA210?
3. The release notes say for rc1 the sound issues are fixed. I try to run it, and it freezes on creating data.img. There is a post describing using the image from 2.1, but that makes "panic", and none of the fixes in that post seem to work. So question is, any recommendations on setup for 2.2 on Pure TOPA210?
Really awesome thing y'all are doing here, BTW.
Click to expand...
Click to collapse
There are no noobish questions, only stupid answers .
1. There is no build yet with the external sound working ( known and common problem on TP2 and TD2 ).
2. I would recommend to use the 2.2 Froyo build because the 2.1 is no longer under development, we are focusing now ( devs i mean ) to Froyo build mainly now.
3. From Froyo beta v2 till RC1 we had some problems running the build ( kernel panics ), but all was fixed with a new zImage ( 20/07 zImage i think ) anyway head over to the general thread here and go back 1-2 pages back and you will see which one fixes that.
Thanks! The newer zimage and such got it going! I cam use the data connection, but still hangs on calls with the latest, so will try the image from 7-20 and see how that works.. Thanks for the help!
I guess I'm a bigger noob! I'm having trouble locating a froyo build that works on my HTC PURE (topa210).
What builds / sources are you using?
nitronikon said:
I guess I'm a bigger noob! I'm having trouble locating a froyo build that works on my HTC PURE (topa210).
What builds / sources are you using?
Click to expand...
Click to collapse
I am using the newest package and the 7-29 silage package and works great on my pure
Sent from my MSM using XDA App
QUESTION TIME:
if we are using xdandroid on on our td2's does that make it by default rooted???
and do we have cyanogen mod or not???
Trekfan422991 said:
QUESTION TIME:
if we are using xdandroid on on our td2's does that make it by default rooted???
and do we have cyanogen mod or not???
Click to expand...
Click to collapse
Answer time :
Yes, XDAndroid is by default rooted.
Yeah we have CyanogenMod for our device, head over here for more details.
cool thanks.. one more...
will any android rom work on our device or just specialy cooked ones for the td2 (pure)
Trekfan422991 said:
cool thanks.. one more...
will any android rom work on our device or just specialy cooked ones for the td2 (pure)
Click to expand...
Click to collapse
Some of the chefs modifies the kernel,... for their devices ( but they are very rare ). You can use the "roms" from devices listed in my signature under the XDAndroid logo. But i think in near future the Android "roms" for TD2 will start poping up.
Where can the "silage package" be found?
Thanks!
is it true that the random app launching is a an issue on all android phones and that google can gemotely do anything that they want to to the device???
im really hating the ads and the random app launching!!!!
Hey All,
I was just wondering if data2ext would be possible for our beloved milestone. Could some devs please take a look at this - http://www.xda-developers.com/android/new-hack-for-desire-and-nexus-one-data2ext/ ?
I hope this will be possible.
mohitrocks said:
Hey All,
I was just wondering if data2ext would be possible for our beloved milestone. Could some devs please take a look at this - http://www.xda-developers.com/android/new-hack-for-desire-and-nexus-one-data2ext/ ?
I hope this will be possible.
Click to expand...
Click to collapse
I'm going to say no (on Froyo) currently - data2ext seems to requires the same thing that apps2sd (CM) does, and the G.O.T. 2.2.1 leaked SBF doesn't support it.
If you still have 2.1u1/2 from MOTO - then maybe.
So you are saying that the former one is may be compatible but no for the new one ? may be we have to wait for the officiall froyo for this ?
Craven68 said:
So you are saying that the former one is may be compatible but no for the new one ? may be we have to wait for the officiall froyo for this ?
Click to expand...
Click to collapse
Yes, the 2.1 moto kernel supports it, but the leaked 2.2 moto kernel doesnt. Hopefully the official kernel 2.2 will. So if your phone is still on eclair it could be potted, but I don't think any devs are focused on eclair roms much anymore
The way it's implemented requires ext access from Android. This requires a kernel module which for now does not work in our leaked 2.2.1 based builds. It will probably work when Moto releases the source code for the kernel. As of now, ext access is only on 2.1 based builds.
Lollipop_Lawlipop said:
The way it's implemented requires ext access from Android. This requires a kernel module which for now does not work in our leaked 2.2.1 based builds. It will probably work when Moto releases the source code for the kernel. As of now, ext access is only on 2.1 based builds.
Click to expand...
Click to collapse
So will this work with eclair then? (2.1) And if yes, how?
mohitrocks said:
So will this work with eclair then? (2.1) And if yes, how?
Click to expand...
Click to collapse
yes, it should work on eclair - if a dev is willing to try to port it.
Can't wait, hope this will get ported so I can mess with it my Milestone.
Tried this on my Droid tonight and had no luck. On my old phone(CDMA HTC Hero200) I was going from 190MB of internal space to around 473MB of internal space. I just tried it tonight on my Droid with all the coding on Better Terminal Emulator Pro and had no luck whatsoever. I am running CM7.1 Stable on my Droid. It's Android 2.3.7 Gingerbread and thats what I had on my Hero as well. I'll keep looking at the coding and everything and see what I can do for us. I'll talk with some guys over in the Hero Forums about it too. There are different types of data2ext versions as well that may be of some use to us.
EDIT: OK,I had an old android app sitting around on my external called swapper.apk. I gave it a try on my droid today as well and had no luck. I used to use that app on my old T-Mobile G1 way back in the day. Thought it MAY work but got nothing,I'm at a loss right now but will keep working on this for everyone!
Most latest rom are laggy to use and have issue on Market.
Is there any roms recommended?
Try SuperAosp 6.4.x. See if you like it.
BeenAndroidized said:
Try SuperAosp 6.4.x. See if you like it.
Click to expand...
Click to collapse
Cannot find the one you mentioned
http://forum.xda-developers.com/showthread.php?t=1088159
It was posted under HTC Sapphire: myTouch 3G, Magic myTouch 3G, Magic Android Development > SuperAosp 6.4.
But it also works for G1.
BeenAndroidized said:
http://forum.xda-developers.com/showthread.php?t=1088159
It was posted under HTC Sapphire: myTouch 3G, Magic myTouch 3G, Magic Android Development > SuperAosp 6.4.
But it also works for G1.
Click to expand...
Click to collapse
Thanks for your reply but I found it a 2.3 based rom.
Actually, I think 2.3 is just to demanding for G1
Yes it is a 2.3.x base and it will keep going up. currently the ROM is at 6.4.2.
It is not demanding as far as I know. I am currently using the base 6.4 and getting ready to upgrade to 6.4.2 (for basic fixes).
But that is up to you.
Even with the 2.1 base I think it's still demanding.