When I place a call, at 10 seconds the phone backlight turns-off, and at 15 seconds the "power-off" occurs (like when you touch the power button and the screen blanks, not actually powering down the phone). At first, it seemed like a minor annoyance, but I realize now it is a problem, because when I touch the power button to bring the screen on, the start menu and some menu and touch features are locked. You have to wait until the call is over, and even then, you must touch power button off, then on to unlock the start menu and other features. It does not matter if you use the touch screen or hard buttons.
I have adjusted the backlight and power off features all the way to completely off, both during and not during a call, it still occurs.
I have been told by the company I purchased the TyTN II from that this is a known problem?? If so, is there a solution?
Respectfully,
Dave Kleiman - http://www.davekleiman.com
Take a look at the information in this thread:
http://forum.xda-developers.com/showthread.php?p=1519024
Thanks!! That was quick.
I wonder since I am reporting about the start menu and such being locked/non-operational when I bring the phone "back on" during a call, if there might be an additional problem with the phone. I see no mention of that issue in the other thread.
To fix the start menu/screen lock problem simply disable your lock pasword. It is a bug with the device. If you must have the password you will just have to deal with the problem until there is a rom update.
Hello all,
I just got my AT&T Tilt and love it so far, except for one major annoyance. When I press the power button, the device will turn the screen back on after a few seconds to a few minutes. The problem is when it's in my pocket, it can accidentally call people. My 8125 and 8525 did not experience this issue.
Any suggestions?
Thanks!
Button lock
It sounds as though the phone isn't set to lock all buttons except the power button when it is in standby. This happened to me last time I re-flashed my Wizard, and I couldn't figure out for ages why my battery was draining so quickly as well!
Settings > Buttons > Lock
Hmm, not seeing any option under Buttons or Lock. I do remember this setting from WM5. It does appear, however, that the buttons are not turning the phone on, it's just waking up even if I leave it on a desk.
You can add lock to the home screen
first press and hold the hang-up button so that it locks. Then just push the power button once. This puts it in standby.
There is a idle timeout for going on standby mode, but I can't find a setting to auto-lock.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
Are you paired to a Bluetooth device? I see similar behavior in my 8525 when in my car - the BT car kit does stuff which "wakes" the 8525
Richard
Try this leaving Google Maps On the Screen
Hi Guys,
I get this behavior when I have Google Maps running. It will even cycle the screen on and off a couple times.
nope and nope. just sitting on the today screen.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
I have the very same problem.
However, my girlfriend whom I also bought a Tilt for, her's doesn't do it.
We've installed all the same software too, so I'm a little puzzled.
start>settings>system> key lock. set it to lock all buttons except power.
rzanology said:
start>settings>system> key lock. set it to lock all buttons except power.
Click to expand...
Click to collapse
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
JonRick said:
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
Click to expand...
Click to collapse
Any number of applications might be starting the device, from weather apps to calendar, diary, time sync etc etc. For example, HTCs weather app will do it depending on how often you have it set to another example I came across from someone was TREO ALERTS that contains a script "refresh.mscr" and it was set up refresh time 30 seconds (this was turning his TyTn II on by itself).
Mike
hard reset and try again.
i'm betting that none of these suggestions were helpful (except the one about some application generating a wakeup event without any other visual notifications).
i was having the same problem, but i just tried to narrow down which running program was causing the events. it's one of:
* wireless manager
* messaging
* IM
my guess is IM; i'm going to test that out in a second.
well, it's none of the above. still seems to wake up randomly anywhere from 15 seconds to several minutes.
seems to happen more frequently when it's just been turned off.
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
dscline said:
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
Click to expand...
Click to collapse
i'm fine with using the lock function, but it still turns on randomly, using battery, and eventually unnecessarily yellowing the screen from backlight aging. my next approach is to check out the notification queue, using a notification cleaner app.
So i am having a similar problem. When i press the power button, the phone's screen turns off but when the keyboard slides, it turns back on... is there a way to make it so the keyboard sliding does not turn on the device? I think the keyboard slides around a little when in my pocket and i hate pushing 3 buttons to unlock my phone... thanks
I was having the same problem.
This is an issue with the ATT rom. Flash over HTC rom and you will be all set.
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the TyTn II):
http://forum.xda-developers.com/showthread.php?t=341419
Hello everyone. I have an AT&T Tilt, and it's great so far, except for two issues:
1) After I end a phone call, the backlight seems to go off and the screen is very dim. Pressing keys does not bring the backlight back. If I power the screen off and on, the backlight comes back on and the screen is at its normal brightness.
2) I lock my AT&T Tilt using the "Device unlocked" area on my home screen, and when I unlock the phone, sometimes it asks for my PIN, and sometimes it just shows the unlock button on the screen. My settings are for a 12 hour timeout.
If anyone can shed any light on possible fixes to these issues, that would be great. Thanks!
mrbofus said:
Hello everyone. I have an AT&T Tilt, and it's great so far, except for two issues:
1) After I end a phone call, the backlight seems to go off and the screen is very dim. Pressing keys does not bring the backlight back. If I power the screen off and on, the backlight comes back on and the screen is at its normal brightness.
2) I lock my AT&T Tilt using the "Device unlocked" area on my home screen, and when I unlock the phone, sometimes it asks for my PIN, and sometimes it just shows the unlock button on the screen. My settings are for a 12 hour timeout.
If anyone can shed any light on possible fixes to these issues, that would be great. Thanks!
Click to expand...
Click to collapse
I have the same issue after a phone call....
Same issue here too... it doesn't happen when on USB-power... and I don't remember it doing this before the security-Exchange policy was forced onto my phone.
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
I think this happens coz the phone goes into standby / lock mode during your phone call. Just press the on/off button to turn screen off, and press again to turn on. Now your phone will be responsive again.
Minor bug.
Or you can just scroll the volume wheel to turn it back on.
michi123 said:
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
Click to expand...
Click to collapse
thanks michi
thanks everyone for your replies. I will try the StayUnlock application.
I still don't understand my second issue though. If the bug is causing this issue, shouldn't it at least be consistent in either requiring me to type in my PIN or just hit the unlock button? I have set my phone to lock after 12 hours, so it should never ask for my PIN, just the unlock button...
I now see that people have been having the first issue since the Cingular 8125 but I have been unable to find any references to my second issue.
ATT Til and Backlight
When making a phone call, once connected, about 12 seconds later the screen goes dark regardless of the setting on the backlight. I am not using a password, and the only way to get back is to use the power button. using the phone button puts the call on hold
Hi, I am starting a new thread with this issue, because my friend Google couldn't help me much and I hope that maybe somebody would know the answer.
Is there any software to suspend the device and to turn it back on immediately (all into one link, to switch off, then back on, automatically)?
This would be good for re-activating the swipe areas when using Touch Lock Pro, when they loose their receptivity (it happens occasionally). For right now, the solution I have is to press the power button twice, once to suspend, and secondly, to bring the screen back on.
If I had a software to do automatically both moves, with one click on the screen (so the screen would turn off and on again), that would make it much more easy, and no need to overuse the hard button.
thank you very much for any suggestion
Hi, is it possible to use tasker or some other app to change the time after which Gear should return to home screen? For example, let's say I'm browsing reddit, and I'm taking a break by switching the screen off. Let's say if I turn it on again within 15 minutes - it should come back to the same screen where I powered it off.... Now in case it's been more than 15 minutes, let's say 25, next time I turn the power on, I want to see my main home screen - the clock face. Any idea on how to do that?
nice question. this is the same problem i have.........
but, do exist a time minimun to waut... before the power button return you to HOME?
.......I never noticed if after a certain time that works back to the main screen. ( excuse me for my bad english)