[Q] Power button remap and going back to home screen - Samsung Galaxy Gear

Hi, is it possible to use tasker or some other app to change the time after which Gear should return to home screen? For example, let's say I'm browsing reddit, and I'm taking a break by switching the screen off. Let's say if I turn it on again within 15 minutes - it should come back to the same screen where I powered it off.... Now in case it's been more than 15 minutes, let's say 25, next time I turn the power on, I want to see my main home screen - the clock face. Any idea on how to do that?

nice question. this is the same problem i have.........
but, do exist a time minimun to waut... before the power button return you to HOME?
.......I never noticed if after a certain time that works back to the main screen. ( excuse me for my bad english)

Related

Tilt Annoyance

Hello all,
I just got my AT&T Tilt and love it so far, except for one major annoyance. When I press the power button, the device will turn the screen back on after a few seconds to a few minutes. The problem is when it's in my pocket, it can accidentally call people. My 8125 and 8525 did not experience this issue.
Any suggestions?
Thanks!
Button lock
It sounds as though the phone isn't set to lock all buttons except the power button when it is in standby. This happened to me last time I re-flashed my Wizard, and I couldn't figure out for ages why my battery was draining so quickly as well!
Settings > Buttons > Lock
Hmm, not seeing any option under Buttons or Lock. I do remember this setting from WM5. It does appear, however, that the buttons are not turning the phone on, it's just waking up even if I leave it on a desk.
You can add lock to the home screen
first press and hold the hang-up button so that it locks. Then just push the power button once. This puts it in standby.
There is a idle timeout for going on standby mode, but I can't find a setting to auto-lock.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
Are you paired to a Bluetooth device? I see similar behavior in my 8525 when in my car - the BT car kit does stuff which "wakes" the 8525
Richard
Try this leaving Google Maps On the Screen
Hi Guys,
I get this behavior when I have Google Maps running. It will even cycle the screen on and off a couple times.
nope and nope. just sitting on the today screen.
JBHorne said:
When I press the power button, the device will turn the screen back on after a few seconds to a few minutes.
Click to expand...
Click to collapse
I have the very same problem.
However, my girlfriend whom I also bought a Tilt for, her's doesn't do it.
We've installed all the same software too, so I'm a little puzzled.
start>settings>system> key lock. set it to lock all buttons except power.
rzanology said:
start>settings>system> key lock. set it to lock all buttons except power.
Click to expand...
Click to collapse
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
JonRick said:
Hmmm.. yeah, umm my key lock is already set to lock all buttons except power.
The problem isn't with when you press a button it comes on. The problem is the phone turns on by itself, sitting on a table, nothing being pressed, no new email, no new sms, just lights up and that's it.
Click to expand...
Click to collapse
Any number of applications might be starting the device, from weather apps to calendar, diary, time sync etc etc. For example, HTCs weather app will do it depending on how often you have it set to another example I came across from someone was TREO ALERTS that contains a script "refresh.mscr" and it was set up refresh time 30 seconds (this was turning his TyTn II on by itself).
Mike
hard reset and try again.
i'm betting that none of these suggestions were helpful (except the one about some application generating a wakeup event without any other visual notifications).
i was having the same problem, but i just tried to narrow down which running program was causing the events. it's one of:
* wireless manager
* messaging
* IM
my guess is IM; i'm going to test that out in a second.
well, it's none of the above. still seems to wake up randomly anywhere from 15 seconds to several minutes.
seems to happen more frequently when it's just been turned off.
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
dscline said:
Even if you were to find what was turing the phone back on, this can still be a problem just from normal use... obviously, you WANT the phone to turn on for things like a call coming in. The solution for people like us who stick our phones in our pockets is to "lock" the phone. But for whatever reason, the Tilt doesn't lock the phone while holding down the end key. That means the only convenient way to lock it is to keep the lock function on the today screen, wasting space. Hopefully someone can find a way to allow the end key to lock the device on the Tilt just like the unbranded device.
Click to expand...
Click to collapse
i'm fine with using the lock function, but it still turns on randomly, using battery, and eventually unnecessarily yellowing the screen from backlight aging. my next approach is to check out the notification queue, using a notification cleaner app.
So i am having a similar problem. When i press the power button, the phone's screen turns off but when the keyboard slides, it turns back on... is there a way to make it so the keyboard sliding does not turn on the device? I think the keyboard slides around a little when in my pocket and i hate pushing 3 buttons to unlock my phone... thanks
I was having the same problem.
This is an issue with the ATT rom. Flash over HTC rom and you will be all set.
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the TyTn II):
http://forum.xda-developers.com/showthread.php?t=341419

Phone keeps popping out of suspend

The screen keeps blinking back to full brightness, every 30 seconds or so, when it is left alone and the screen dims normally. It is as if something is pressing a button or touching the screen.
When I press the power button and send it to suspend mode, the backlight goes off, and the tilt no longer responds to touch or button pressing. For some reason it pops itself out of suspend and turns back on every couple minutes. My battery life is going down extremely fast. 100% to 40% in three hours.
Any help would be greatly appreciated. I searched the forum but never found a specific topic for this issue.
MiniDevil said:
The screen keeps blinking back to full brightness, every 30 seconds or so, when it is left alone and the screen dims normally. It is as if something is pressing a button or touching the screen.
When I press the power button and send it to suspend mode, the backlight goes off, and the tilt no longer responds to touch down extremely fast. 100% to 40% in three hours.
Any help would be greatly
appreciated. I searched the forum
but never found a specific topic for
this issue.
Click to expand...
Click to collapse
I have the same problem w
th the backlight comming on by itself & battery life depletes extremely fast. I am using HD 15 Nov with 3.29.
In addition to backlight issue my hardware keys are no longer working.
Please has anyone got any advice
i have the same problem. the only thing that seems to work is doing the keypad lock and putting it to sleep. it will occasionally blink like its trying to come back on but doesnt. another thing i did is put my phone in flight mode, locking the keypad and putting it to sleep. when i do that it doesnt blink or anything. sadly i wont receive phone calls or emails and texts. i think the blinking has something to do with phone signal and accessing the networks.
hth
also i noticed that it wakes from sleep when the keypad "unlock" screen pops up.
i think i found a fix
Ok I hope this helps for you because it seems to work for me. I first went to start/settings/sounds & notifications. Then I clicked on the notification tab and unchecked everything leaving only the ringer on for when calls come in. when I did that, for about 5 minutes (longest I tested it at) the phone did not turn on and the backlight didn’t do that weird grayish flash thing. Afterwords I at first was going to go down the list of all notifications and turn things on/off to see what wakes up my phone but i got too lazy and only checked one setting. One thing I noticed is that when I have the beam: autorecieved notification turned on for display a message on the screen I get that weird backlight flickering thing. So for now I just have sound alerts on when I receive any type of messages and a sound alert for reminders. So far so good, my phone hasn’t woken from sleep in 20 minutes.

[Q] [REQUEST][App] Global screen dim time out

Hi everyone!
Has anyone found a way (maybe an app?) to change the screen backlight/lock behaviour?
What I'm looking for is the following behaviour:
Ability to have the screen only turn off the backlight after a certain amount of time, with
a) option to lock the device at the same time
b) option to also turn off the part of the screen that reacts to touch at the same time
c) options to set the timers for the aforementioned options separately
Basically I want the device to turn off the screen after 30 seconds to save power, but stay responsive to touch so that I don't need to pick up the device and press the power button before I can use it.
Then, after about 5 minutes, it should lock itself but respond to touch, so that it can be unlocked without needing to press the power button.
Then, after another five minutes, the screen should completely go off and stop responding to touch altogether (the way it is on Android by default).
Has anyone found a way to do this? It would be REALLY useful for when you've got the phone laying flat on your desk and are IM'ing with a slow typer, meaning you've got 2 or 3 minutes between each message, and need to press the power button every time you get one...
It shohuld be a default setting in my opinion...
Thanks in advance!
You might get a wider audience posting in here: http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=&f=564

lock screen not auto tuning off

had something odd happen to my phone on the weekend. I pressed the power button (to wake it up) so I could quickly see the time and temp and I put it down, came back to it 3 hours later and the screen was still on.... (on the locked screen)
I unlocked it and locked it again and it wouldn't turn off the screen without me hitting the power button to do it
This happened last night as well and I noticed that it dimed the screen and stayed on when sometimes I see it dim then turn off a second later. Rebooting it makes it go back to the usual turning off after 10 or so seconds
I posted this on the aussie Whirlpool forms and someone else has said they have seen the same thing happen
sorry should have put in that I am on the 4.2.2 update on the Australian unbranded handset
chippyaus said:
had something odd happen to my phone on the weekend. I pressed the power button (to wake it up) so I could quickly see the time and temp and I put it down, came back to it 3 hours later and the screen was still on.... (on the locked screen)
I unlocked it and locked it again and it wouldn't turn off the screen without me hitting the power button to do it
This happened last night as well and I noticed that it dimed the screen and stayed on when sometimes I see it dim then turn off a second later. Rebooting it makes it go back to the usual turning off after 10 or so seconds
I posted this on the aussie Whirlpool forms and someone else has said they have seen the same thing happen
Click to expand...
Click to collapse
Try going to Settings -> Display -> Sleep and then selecting your preference, that solved it for me. It seems that sometimes this setting doesnt get recognized, so you have to select it again.

Screen unlocks too easily

Hi everyone,
So as I'm sure everyone is well aware, the buttons on the S6 Active are huge and very easy to press (probably designed to be used with gloves). Problem is, the phone frequently turns on in my pocket (I think) because the power button is somehow getting pressed. I'm looking for an app or setting that will require the power button to be double pressed to turn the screen on, or something to that effect. Has anyone found anything like this to save power?
Thanks for any help.
Mine did it a lot before I got a Supcase, now the buttons are a bit harder to press while in my pocket. I do notice that my phone screen turns on when a SMS comes thru, sometimes it'll do some crazy things if it registers touches.
Try putting a glass screen protector on. Pressing the home button brings up the lock screen, add does hitting the blue active button.

Categories

Resources