Amon_RA 1.7 not wiping cache and dalvik - Hero CDMA Q&A, Help & Troubleshooting

I recently updated to the latest Sprint release in order to get the new radio and PRL. I re-rooted using this method http://forum.xda-developers.com/showthread.php?t=804296&highlight=root . Ever since then, I been unable to wipe cache and dalvik in the recovery menu. It says it's done wiping, but nothing happens. I also been having trouble restoring nandroids, it would be stuck at the white HTC screen and I have to pull the battery and try again.
Anyone having this problem?

Try reflashing your recovery and are you using Firerats mod by chance????
Root-Hack-Mod-Always™

laie1472 said:
Try reflashing your recovery and are you using Firerats mod by chance????
Root-Hack-Mod-Always™
Click to expand...
Click to collapse
I've tried re-flashing with no change, and yes I'm using Firerats.

I think I'm having this problem as well... maybe. When I try to nandroid restore, I have to go through the Google account setup and when I skip it my launcher crashes...

I've had 1.7 for a long time, and I don't think I have any problems with it.... Oddly though, you say the recovery "says it's done wiping" and nothing happens, what the heck is supposed to happen? and what specifically makes you think it is not wiping? I now am curious if I have the same issue. My nandroids do seem to always work, whether creating one or restoring one...

When wiping cache, it will free up some internal memory. When wiping dalvik, it will take longer to boot, around 10 minutes. This no longer happens.
Sent from my HERO200 using XDA App

For the Dalvik, you can be absolutely sure by wiping Dalvik, connecting phone to usb, and in command prompt type
adb logcat
If you see a lot of lines saying DexOpt then that means Dalvik was indeed wiped.

c00ller said:
For the Dalvik, you can be absolutely sure by wiping Dalvik, connecting phone to usb, and in command prompt type
adb logcat
If you see a lot of lines saying DexOpt then that means Dalvik was indeed wiped.
Click to expand...
Click to collapse
I don't see anything saying DexOpt when I adb logcat.

c00ller said:
For the Dalvik, you can be absolutely sure by wiping Dalvik, connecting phone to usb, and in command prompt type
adb logcat
If you see a lot of lines saying DexOpt then that means Dalvik was indeed wiped.
Click to expand...
Click to collapse
is is then safe to assume if I logcat using the catlog app I have after a dalvik wipe it would show the same output? I can't connect to a comp at work

shilent said:
I don't see anything saying DexOpt when I adb logcat.
Click to expand...
Click to collapse
Sorry, I should have been more thorough. You should see a lot of DexOpt lines during the subsequent boot process, not during the actual Dalvik wipe in recovery. Just to be sure, is that what you meant?

c00ller said:
Sorry, I should have been more thorough. You should see a lot of DexOpt lines during the subsequent boot process, not during the actual Dalvik wipe in recovery. Just to be sure, is that what you meant?
Click to expand...
Click to collapse
I ran adb logcat after the phone booted. Anyway, I just switched back to Clockwork recovery which wipes properly, RA 1.62 also wipes properly. I don't know why 1.7 stopped working for me.

shilent said:
I recently updated to the latest Sprint release in order to get the new radio and PRL. I re-rooted using this method http://forum.xda-developers.com/showthread.php?t=804296&highlight=root . Ever since then, I been unable to wipe cache and dalvik in the recovery menu. It says it's done wiping, but nothing happens. I also been having trouble restoring nandroids, it would be stuck at the white HTC screen and I have to pull the battery and try again.
Anyone having this problem?
Click to expand...
Click to collapse
Try Installing....
CacheMate For Root Users,
Works Good For Me!!
Sent from my HERO200 using XDA App

Well, 1.7 doesn't wipe properly for me either anymore.... weird - I wonder what broke it, because it seems it is not an isolated occurance... I dislike clockwork so I will try out 1.6.2. I wonder if this is why people in the GB thread who use 1.7 have been having issues getting the rom to work/bootloops... I bet it is. I will test 1.6.2 and see if I can flash GB without loops and post over there. And to pmgrands, yes there is that app which I've had for a while and it's nice when you don't want to go into recovery. BTW you can also wipe the dalvik cache using titanium backup, and you can wipe data/factory reset using the system settings menu, but it's way easier to do it all in one place(recovery), especially when you are about to flash something, but thanks for heads up for those who didn't already know about it.

il Duce said:
Well, 1.7 doesn't wipe properly for me either anymore.... weird - I wonder what broke it, because it seems it is not an isolated occurance... I dislike clockwork so I will try out 1.6.2. I wonder if this is why people in the GB thread who use 1.7 have been having issues getting the rom to work/bootloops... I bet it is. I will test 1.6.2 and see if I can flash GB without loops and post over there. And to pmgrands, yes there is that app which I've had for a while and it's nice when you don't want to go into recovery. BTW you can also wipe the dalvik cache using titanium backup, and you can wipe data/factory reset using the system settings menu, but it's way easier to do it all in one place(recovery), especially when you are about to flash something, but thanks for heads up for those who didn't already know about it.
Click to expand...
Click to collapse
No Problem Buddy (il Duce) Anytime!! I Hear You, It Definitely Is Easier To Do It From Recovery, But Like You Said The Damn Thing Just Doesn't Work All The Time!! Had To Find A Alternative!!
Sent from my HERO200 using XDA App

Related

[Q] com.android.phone

Is anyone else having with this file? I have been trying to update my Nightly build of CM7 heroc #12 to 13. I do the wipe and all that and the install is successful but when the phone loads it says com.android.phone has stopped unexpectedly. Please restart. I click ok and it does it again over and over again and its pops up right away after i click ok. any suggestions??
You might have a bad download. Redownload and see if that works. Also are you using firerats mod??? If not then try a full wipe as in data,cache,dev-cache and sd-ext.
Yea its me again with the
Modified Hero--
No I am using Nandroid. and I did that. um I will try the redownload and see if that works thanks for the advice. whats Firerats?? Is that better?
lucifersocom said:
No I am using Nandroid. and I did that. um I will try the redownload and see if that works thanks for the advice. whats Firerats?? Is that better?
Click to expand...
Click to collapse
Firerarts is a mod that will resize your data partition. And what recovery are you using??
Yea its me Again With the
Modified Hero-
Your recovery image may be outdated, update your recovery image and then do a wipe on data, cache, and dev-cache and then reboot.
waffle_ said:
Your recovery image may be outdated, update your recovery image and then do a wipe on data, cache, and dev-cache and then reboot.
Click to expand...
Click to collapse
Ok I redownloaded the ROM and it works now no issue what so ever also did all this other stuff Thanks guys!
laie1472 said:
Firerarts is a mod that will resize your data partition. And what recovery are you using??
Yea its me Again With the
Modified Hero-
Click to expand...
Click to collapse
Oh ok and I am using the stock recovery. I tried amon_Ra and clockworkMod but hey both do something wrong cause everytime I do a backup something on my phone doesnt work afterwards or the recovery doesnt work and the Stock one is working perfectly fine.
You're welcome!
For good measures, you should wipe everything and then flash your recovery TWICE, and then reboot into recovery mode -- flashing it twice usually ensures a healthy installation without problems.

[Q] can't flash any rom but asop v0.9.9.2

no ext, no MTD, have tried recovery v2.0.0.5 / v3 / v4
Used to flash often without a problem, until some day all roms suddenly fail.
to make sure all data/cache are cleared, all wipe (4 totally) and all format (but sdcard/ext) are done. still i wouldn't work. only asop v0.9.9.2 will do.
could anyone tell me why?
not a soul
not a soul
At least the only rom you can flash is arguably the best ROM over made for the heroc. Could be worse.
Sent from my wildheroc using XDA App
what error is it giving you?
MrDowntown12 said:
At least the only rom you can flash is arguably the best ROM over made for the heroc. Could be worse.
Sent from my wildheroc using XDA App
Click to expand...
Click to collapse
thanks for replying. I totally agree with you, however, one could be curious sometimes to try new things.
ajrty33 said:
what error is it giving you?
Click to expand...
Click to collapse
thanks for replying.
it just stopped at the white screen with HTC logo
i believe i've waited long enough to make sure it's not working.
and there wasn't any error reported while flashing.
Could it be SDcard problem?
I think you're not wiping good enough. Flash caulkins format all then wipe EVERYTHING manually except SD card but NOT excluding sd-ext. Then go to advanced (assuming you're on cw) and wipe dalvik. Then flash caulkins format all one more time. Flash the rom and report back. I'm sure it will work
Sent from my HERO200 using XDA App
Try Exactly what the ABOVE post suggested, and Report back!
abadasstanker69 said:
I think you're not wiping good enough. Flash caulkins format all then wipe EVERYTHING manually except SD card but NOT excluding sd-ext. Then go to advanced (assuming you're on cw) and wipe dalvik. Then flash caulkins format all one more time. Flash the rom and report back. I'm sure it will work
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
don't know what your "caulkins" means.
i use cw recovery
4wipe(data/cache/dalvik/battery) + 4format(boot/cache/data/system)
I don't perceive any other wipe/system options.
anyway thanks for reply
---------- Post added at 07:44 AM ---------- Previous post was at 07:43 AM ----------
PMGRANDS said:
Try Exactly what the ABOVE post suggested, and Report back!
Click to expand...
Click to collapse
i use cw recovery
4wipe(data/cache/dalvik/battery) + 4format(boot/cache/data/system)
I don't perceive any other wipe/system options.
anyway thanks for reply
Caulkins is a zip that formats the boot, data, system, and cache in one step. It can be.found in the first post of the wildheroc Rom thread.
But your doing what it does already, it just makes it faster really. Still worth a try tho
Also, I remember when people used to have problems flashing stuff, a wipe of the SD card helped. Just back everything up on your computer the wipe it with everything else.
I don't know if they ever figured out why it worked, just that sometimes a bad file get on the card and wont let it boot. Just another suggestion to try.
Sent from my HERO200 using XDA App

P880 won't boot after 442 flashing

Hi guys,
Need your assistance in this. I downloaded the 4.4.2, the Gapps (stock version), and the CWM Touch 6044. Flashed successfully the 6044. Rebooted, and flashed omni 442 and then the gapps. Did a wipe data/factory reset. Then pressed reboot device. The phone will restart and stay stuck at the Omni Logo. No progress from there at all. Did a few other reboots and different combinations to the above but to no result. Stuck there. Finally, did a restore from my backup just to have a phone again..Any idea what I did wrong from the start?
How long did you wait at the first bootup? It took quite long for me, so I'd suggest waiting up to 20 minutes before turning off the phone. Try flashing with the most lightweight Gapps package, that's what everyone seems to be using. You could also try wiping cache and dalvik cache.
Nalefyre said:
How long did you wait at the first bootup? It took quite long for me, so I'd suggest waiting up to 20 minutes before turning off the phone. Try flashing with the most lightweight Gapps package, that's what everyone seems to be using. You could also try wiping cache and dalvik cache.
Click to expand...
Click to collapse
Well, did the Dalvik cache but later on, when I was experimenting. I had waited at least 16/18 minutes till my patience ran out...
Decided to have one more go right now. 1. Did a wipe data / factory reset. 2. After that, wiped Dalvik cache. 3. Presently installing Omni and then will install gapps. 4. Will reboot and leave it to boot until I leave work. (couple of hours from now). And will see what happens.
- Forgot to add thaty in all instances, I selected YES in the "root" question in the end. -
Thanks for replying!
---Update
Nothing changed. Stuck at the Omni logo for about 50 minutes..
The_Sniper said:
Well, did the Dalvik cache but later on, when I was experimenting. I had waited at least 16/18 minutes till my patience ran out...
Decided to have one more go right now. 1. Did a wipe data / factory reset. 2. After that, wiped Dalvik cache. 3. Presently installing Omni and then will install gapps. 4. Will reboot and leave it to boot until I leave work. (couple of hours from now). And will see what happens.
- Forgot to add thaty in all instances, I selected YES in the "root" question in the end. -
Thanks for replying!
---Update
Nothing changed. Stuck at the Omni logo for about 50 minutes..
Click to expand...
Click to collapse
So don't flash gapps and ROM back to back. Flash ROM then reboot and after waiting 5 mins reboot and flash gapps again.
Sent from my LG-P880 using XDA Premium 4 mobile app
Maybe format /system in addition to the factory reset (it's under mounts and storage). So you get a completely clean install
Sent from my LG Optimus 4X HD
Thanks for your advice guys - Unfortunately I don't see any results
I booted in recovery and in this order: Wiped data / did factory reset - then wiped Dalvik - then did format /system - then flashed successfully Omnirom and at the end select YES in the "root" question. Did not touch the Gapps.
Same result - has been in the Omni Logo for more than half an hour.
Can someone tell me the absolute prerequisites needed to install and boot normally? Apart from CWM Touch 6.0.4.4 that is?
Thanks in advance
I really don't see any more required steps to install OmniRom. Did you try another downloaded OmniRom? Maybe something is wrong with your used version.
Sent from my LG Optimus 4X HD
The_Sniper said:
Thanks for your advice guys - Unfortunately I don't see any results
I booted in recovery and in this order: Wiped data / did factory reset - then wiped Dalvik - then did format /system - then flashed successfully Omnirom and at the end select YES in the "root" question. Did not touch the Gapps.
Same result - has been in the Omni Logo for more than half an hour.
Can someone tell me the absolute prerequisites needed to install and boot normally? Apart from CWM Touch 6.0.4.4 that is?
Thanks in advance
Click to expand...
Click to collapse
Select No in the root option.
Sent from my LG-P880 using XDA Premium 4 mobile app
[email protected] said:
Select No in the root option.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That shouldn't do any damage (I tried both ways and didn't notice any difference )
I really think your downloaded ROM zip is corrupt as nobody else having problems with it
Sent from my LG Optimus 4X HD
Omario-242 said:
That shouldn't do any damage (I tried both ways and didn't notice any difference )
I really think your downloaded ROM zip is corrupt as nobody else having problems with it
Sent from my LG Optimus 4X HD
Click to expand...
Click to collapse
Yeah, will redownload - choosing NO also did not make any difference
Did you mount all under mounts and storage?
Coolneng said:
Did you mount all under mounts and storage?
Click to expand...
Click to collapse
all I did under mount & storage is the "format /system". Did not mount anything any other time. Is this part of the procedure too or are we shooting blind here? - Cause directions in the post say flash rom, flash apps, wipe data & reboot, let alone the 15 other combos I've done.
Haven't tried anything yet cause I need to re-download the ROM and presently I can't get any of my 3 PCs "see" the LG's contents like a flash drive. Can only do it in my work's laptop. Beats me why..
If you don't have important data, format internal storage too. No idea for 4.4, but if you flash kdz, this is a must.
Sent from my LG-P880 using XDA Premium 4 mobile app
[email protected] said:
If you don't have important data, format internal storage too. No idea for 4.4, but if you flash kdz, this is a must.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks Black, will try that too. Have everything I need in Helium right now, ready to be restored at any time.
The_Sniper said:
all I did under mount & storage is the "format /system". Did not mount anything any other time. Is this part of the procedure too or are we shooting blind here? - Cause directions in the post say flash rom, flash apps, wipe data & reboot, let alone the 15 other combos I've done.
Haven't tried anything yet cause I need to re-download the ROM and presently I can't get any of my 3 PCs "see" the LG's contents like a flash drive. Can only do it in my work's laptop. Beats me why..
Click to expand...
Click to collapse
It is important to mount everything as far as I know. In my old device's forum it always a step that is specified, I never see it in these forums though.
Try it, you don't loose anything.

Process Ended With Error=255

Can some one explain why I am getting the following
E:mount -o bind 'data/media/0' '/sdcard' process ended wit ERROR=255
+1 please
i have the same on Tab S 8.4 (T700)
When are you having this error?
Sent from my C6903 using XDA Free mobile app
demon148 said:
When are you having this error?
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
When i make wipe data factory reset with samsung's kernel stock OR wipe internal storage with TWRP.
https://drive.google.com/file/d/0B3w6o3fGO_ijOGhZVjI4UlBHcW8/view?usp=sharing
I've gotten this a few times sometimes I've reboot the phone back in to recovery and other times I've waited about two minutes and then tried again, most of the time it works.
Sent from my C6903 using XDA Free mobile app
does not work for me, hard to believe it's that simple... but thx
EDIT : it's good, I used an older recovery and everything works.
I am getting the exact same right now on my Sony Xperia Z3 Compact with TWRP.
Anyone figured out how to resolve this?
alwaysbelieve1 said:
I am getting the exact same right now on my Sony Xperia Z3 Compact with TWRP.
Anyone figured out how to resolve this?
Click to expand...
Click to collapse
Apart from what I have said I have the done, the only other thing is to try and re-flash the pre-rooted rom, other that as far as I know is starting from scratch, but I follow a simple procedure when flashing mine.
Stick Firmware 108 on >> Download SuperSu and Root Checker >> Use EasyRoot to root phone >> Use Recovery Tool >> In Recovery put lollipop on >> Wipe Dalvik Cache and Cache >> Install Pre- Root Lollipop >> Wipe Dalvik Cache and Cache >> Format >> Reboot >> Do Backup. Then setup your phone and it should have worked, but you might have to reinstall recovery.
Ok so I have had to re-root my phone after doing something stupid, and kept getting this error no matter what I did this time. I did a quick search and found that apparently it is harmless, I have left it and went on to setup the phone.
demon148 said:
Ok so I have had to re-root my phone after doing something stupid, and kept getting this error no matter what I did this time. I did a quick search and found that apparently it is harmless, I have left it and went on to setup the phone.
Click to expand...
Click to collapse
Yep me too. All better now.
Ok so I have found a small way around this, but it is a pain. When I get this error, I have already flashed the lollipop rom and am trying to format before restarting so I have a clear canvas to work with, but it won't let me, so what I have to do is go to wipe and then advanced wipe as I know format data gives me a error. Select Dalvik, System, Cache, Data, Internal Storage and wipe them, you may have to do data and internal storage a few times to get it right as it sometimes gives me a error still. After that you will need to re-flash lollipop as you will have no OS on there and if you restart or shutdown you will not be able to boot your phone.
I take no responsibility if anything should happen trying this.
demon148 said:
I've gotten this a few times sometimes I've reboot the phone back in to recovery and other times I've waited about two minutes and then tried again, most of the time it works.
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
Rebooting recovery resolved the issue for me
Update Recovery twrp or lineage Img.
flash an updated recovery and then clean wipe and install new rom. Thats how i took care of my 255 error.

Always stuck at Formatting cache

Hello everyone.
Lately I had this frustrating problem with formatting the cache through any recovery I ever had. ALWAYS!
How flashing a ROM goes:
- I'm powering off the phone and enter in recovery.
- I select Wipe Data/Cache (Or Wipe for a new ROM option in CWM)
- It starts by formatting data and next is cache, where I get stuck.
I don't have many options. I can either pull out the battery or wait a while. Oh, no worries, after 5 minutes of "formatting cache" it reboots, with the current ROM messed, obviously.
It's annoying because no one seems to have this problem and it happens every single time when I wipe.
Hope there is someone who will bother helping me out with this.
P.S. - I'm no expert, more like a noob, so don't ask me too-technical questions.
Thankiees!
switch to latest TWRP
flash stock om once with odin
wipe data and cache with stock recovery once
then install latest TWRP
that fixed it for me when i had that issue
maultasche said:
switch to latest TWRP
Click to expand...
Click to collapse
I had the latest TWRP when I did so. No matter what recovery I use, I always get stuck there.
DrmohamedShawky said:
flash stock om once with odin
wipe data and cache with stock recovery once
then install latest TWRP
that fixed it for me when i had that issue
Click to expand...
Click to collapse
Thanks for your time, I'll try your method and tell you how it goes.
Spooms said:
Thanks for your time, I'll try your method and tell you how it goes.
Click to expand...
Click to collapse
Thanks! Your method did the trick!
Sent from my GT-I9305 using XDA-Developers mobile app

Categories

Resources