Recently tried to flash from JF6 to JH3 and failed. It's now stuck at the phone ! computer screen.
Here's what I've tried so far starting with all the pull sd,sim,batt out and put battery back in:
1. Hold both vol up and down, then plug in usb.
2. Hold both vol up and down, then plug in usb, and then hold power. Let it flash on and off until I get to the 2nd blank screen, then release power.
3. Hold vol up and power, then plug in usb. Let it flash on and off until 2nd blank screen, then release power.
Holding down and power doesn't make the phone!computer flash at all.
I'm really at a loss now. No idea how to get back into download mode... I wasn't able to use the key combos to do it before; just used adb.
Any tips? Help is much appreciated. Thanks in advance.
I've always done after turning off the phone:
1. Plug in USB
2. Hold volume up + down
3. Press and hold power until it turns off for second time then let go (although it's worked for me on the first time it goes off)
Worked every single time for me.
tysj said:
I've always done after turning off the phone:
1. Plug in USB
2. Hold volume up + down
3. Press and hold power until it turns off for second time then let go (although it's worked for me on the first time it goes off)
Worked every single time for me.
Click to expand...
Click to collapse
Doesn't seem to work for me... anything else you can think of?
Have you tied to Flash it with Odin back to stock? Always flash back to stock before flashing. Every thread starts with the same instructions, flash back to stock first. Not to kick you when you're down.
I'd flash back to stock with Odin.
Rhiannon224 said:
Have you tied to Flash it with Odin back to stock? Always flash back to stock before flashing. Every thread starts with the same instructions, flash back to stock first. Not to kick you when you're down.
I'd flash back to stock with Odin.
Click to expand...
Click to collapse
He wouldn't be able to flash without getting into download mode now would he?
op: Make sure that odin is open and ready on your computer. if that doesn't work then i hate to say it but...
Looks like I've got an expensive paperweight? Luckily for me I got it yesterday...
Stupidly enough though, I probably should have returned it in the first place. It wasn't working quite right... I've never seen a phone not respond to button combos or have problems connecting to a computer via USB and I've owned my share of Samsungs. Each boot into their own recovery mode just fine via buttons... guess I won the lottery?
If anyone has some ridiculously convoluted way to get into download mode, I'd be glad to try it.
Did a bit of snooping...
http://forum.xda-developers.com/showthread.php?t=765703
It seems there are a fair amount of phones with disabled button combos...
when i flashed to jh3, i found doing the adb reboot download the easiest way to get into download, even when i messed up my phone and it would boot to galaxy s screen and it would get stuck. Found plugging it in via usb and then running the adb command
Ah... I see. Well, considering I can't get it to recognize it or anything... it's pretty much fubar. I tried my sister's captivate and it boots into download mode just fine with both vol + plug in usb.. so I assume I just had a defective unit that became more defective.
Thanks for the help all, and let's just have this be a lesson to anybody who wants to know, if you follow the instructions on the odin thread and you can't get in, either you're doing something wrong or the phone is wrong...
And adb never hurt anybody.
Thanks again everybody.
pokedoke said:
Did a bit of snooping...
http://forum.xda-developers.com/showthread.php?t=765703
It seems there are a fair amount of phones with disabled button combos...
Click to expand...
Click to collapse
I just exchanged a Captivate for shutting down by itself, got one that can't three button reboot, accidentally bricked it and couldn't recover it. Exchanged it for yet another one that also can't three button reboot. Uggh!
There have been those that run into problems after installing the XXJP3I9000 update on the Samsung Captivate and attempt to reboot into recovery mode. The issue that they have is that since the Captivate has no physical home button to select an option like you can with the Galaxy S, you can't select an option, and therefore you can't reboot your device regularly. While I am in this same problem and have not figured out a solution, I have started this thread to post what knowledge I have about this issue so that others may help get this issue figured out. If anyone has information on how to fix this problem, please comment below. Let's fix this!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
First of all, the key combinations that standardly would work with the original captivate firmware will not work anymore. Pressing all three buttons (Vol+, Vol - and Power) will only power cycle the phone, that is, until you let up on the buttons. Pressing Vol+ and Vol- and then plugging your phone into the computer will also do nothing. (By nothing I mean will take you back to the recovery menu)
Every key combination will only take you back to the recovery menu, so key combinations seem to be out.
If you boot into recovery mode, take out the battery and put it back in, all the while keeping the phone plugged in to the computer, the phone will enter the "POWER RESET OR UNKNOWN UPLOAD MODE", which will show your device in windows as being a Samsung USB Composite Device and a Samsung Mobile Modem (gadget serial, Windows 7) While this may be helpful, you cannot run ODIN or ADB in this mode, nor does this allow disk access. If you have Samsung Kies installed, it will detect a device, but will never complete loading it.
Other information with this method: On the phone screen, as well as showing "POWER RESET OR UNKNOWN UPLOAD DEVICE" the screen will also show the following in red:
RST_STAT =0X1
PMIC_IRQ1 =0X0
PMIC_IRQ2 =0x0
PMIC_IRQ3 =0x4
PMIC_STATUS1 =0x40
PMIC_STATUS2 =0x2c
If this helps anybody, it was a pleasure
Another method I found briefly was that after installing Kies, and rebooting the phone into recovery mode (again) my computer detected four new devices, two of them being Samsung Android devices and one being a disk drive. Potentially, without freezing or error, the drivers that are included with the Kies software will detect and allow for disk management while the phone is in recovery mode. Three of the four devices installed without error for me, but the fourth, the actual Android device, continued to say "installing device" until I unplugged the phone out of frustration. It has since not detected those four devices again, and I have yet to figure out how to do that again. The nice thing about that was that although the adb.exe reboot download command did not work, adb.exe did detect the phone. if this is true then rebooting normally or into download mode should be easy.
The last thing I noticed is that button furthest to the left on the main screen on the captivate will close the recovery menu when pressed, and leave the background behind, and then will reopen the recovery menu when pressed again. This is showing me that the four touch buttons are operable, but not configured. If it were possible to reconfigure the actions that pressing these buttons do, then it would be easy to be able to reboot the device normally.
I have compiled information to the best of my ability, and here is a question to ask, that I think will help solve the problem. Can the captivate with I9000 2.2 software run adb in recovery mode?
Comments, Questions, and Most of all, answers would be appreciated for me, as well as for other users with the same problem as I. Hopefully, this thread can be the solving point for this problem.
Many Thanks,
TouchofDestiny
The n00b who isn't a n00b at all
An Update: The reason that the combinations don't work for me or either people is because they (and I) fail to install the captivate kernel, and that is making the volume power button controls useless.
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
You're problem is a little different. If you can't get into recovery mode, than that means you aren't in recovery mode, which means you can use ADB to enter download mode and use Odin to flash your phone. I have given up looking for a solution, and have sent my phone back to AT&T for a replacement. Since I'm still in my thirty day trial period, it doesn't matter if I used different firmware or not. Hopefully others won't get into the situation I had. For me, this thread is complete.
brandon9721 said:
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
Click to expand...
Click to collapse
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
yep, same boat
I am in the same position here. I downloaded the froyo leak and installed it with odin, no problem there. Upon startup into froyo, all was good, except my phone was stuck in horizontal mode until I tilted it vertical, *then* it would go horizontal. So basically I am 90 degrees off kilter. I decided to look around for another rom to try, and in the process managed to get stuck in recovery mode. Couldn't tell ya what firmware I have, just what is on the endless recovery screen that I cannot get out of!
I have no external microSD card, only the SIM card, and no way to get it recognized on my XP or win 7 system.
Really, really stuck here, guys. I do have the androidsdk installed, if there is a way to get it to reboot. As it is, adb cannot see the device, so I am looking at a truly bricked phone.
And yes, this is a US phone, which is why the power button and home button are not mapped (I assume).
I am DESPERATE for some help here!
and while I am at it...
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
pkrouse said:
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
Click to expand...
Click to collapse
when you are on the i9000 rom the only button that will get you in download mode is the vol down
That's HUGE!
You, sir, are a gentleman, scholar, and all-round smart guy! How did I miss that? I coulda SWORN I was getting into download mode with both volume keys. I've never been so happy to see a little Dalek dude with a shovel in my LIFE. 2 minutes in the one-click installer and now I'm back in business!
Thanks for helping a terrified owner out, and preventing a trip to the AT&T store.
I cannot go to download mode
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
xaga150 said:
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
Click to expand...
Click to collapse
the key to the i9000 rom/kernel button combo is VOL DOWN + using the USB trick. do not press vol up + down, just the down while you are plugging in the usb cable
i too am stuck in recovery mode. the only way i can get into download mode is by using both volume buttons. just holding the down button just sends me to revoery mode as well. how can i fix my phone in download mode?
nevermind, reinstalled 2.2 and it works now.
Eureka I got it...I think
I installed froyo 2.2 i9000 on my captivate and got stuck in recovery mode...power button doesnt select and when I hold down the up and down vol buttons I couldnt get the downloading icon anymore either. Then I remembered something from another post....
Home + Vol Down + Power = Downloading Icon
It worked for me....let me know if this helped....I'm officially unbricked.
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
JPBetley said:
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
Click to expand...
Click to collapse
JPBentley-- Since the I9000 firmware is set to use physical buttons, and the Captivate doesn't contain any, once you get into recovery mode, you cannot get out. The standard Captivate key combinations to get into download mode do not work, as do the combinations to get into download mode via the I9000 firmware. Basically, you get to a dead end. Unless there is some way to flash the phone's ROM outside of download mode, which I doubt, your best bet is to return the phone for a replacement. After haggling around with AT&T for a while, they admitted that installing the I9000 ROM doesn't invalidate your warranty, so they should take it back. They did with mine, and now I'm running the official Froyo leak. Good luck with your new phone!
SOLUTION
For all those that are having this problem, Ive struggled with it & tried EVERY possible button combination & nothing worked.
The ONLY solutions I have found is to use a usb JIG. Take out the battery, sim card & sd card, plug in the Usb JIG & put the batter back in. Give it a couple of seconds & I'tll enter recovery mode without pushing any buttons. You dont even need to push the power button, it's that simple.
Here is an image of how to make one if you are electronically inclined, personally I am not so I found a local electronic parts store & they put on together for me.
1.bp.blogspot.com/_3KjgtwnRiWM/TNTyjkZGquI/AAAAAAAABL4/7NSmqrYmkmU/s640/i900.jpg
If you want, you can also buy one online, I cant post a link becuase Im a new member but just search for "samsung usb jig" on ebay.com & youll find plenty.
shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=samsung+usb+jig&_sacat=See-All-Categories
yes, i think you need to build a jig or buy one online if you want to play with custom rom. you may not need it now, but you may need it just in case.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139
agustinpac said:
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
Click to expand...
Click to collapse
OMG you saved my life
thx so much for your post
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
drowe24 said:
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
Click to expand...
Click to collapse
That's not even close to a brick. Are you using a usb port closest to the motherboard on your pc? Is your cable good? Make or buy a jig, that will put your phone into download mode.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Ok i was running a custom version of 2.2 FroYo on my captivate and it was running fine. I backed up my old version using Clockwork Recovery. Well i decided to get brave and flash back to my stock 2.1 ROM.
When i did that alls i can get is the AT&T boot screen. It will sit there for an hour if i left it. I tried entering recovery bode (power, vol up/down) but it just sits at that screen.
Is there any hope to recovering it? I use a MAC but im about to boot Win7 on it to run ODIN, but i cant get into any flash/recvoery mode....
Suggestions?
You want to try and get into Download Mode, not Recovery. Have you tried the various button combos to get into Download Mode yet?
If the various button combos ultimately don't work, you can use something called a JIG to force your phone into Download mode.
What is the button combo for download mode? also with is 'JIG'? Im no total newb but i am new to this who flashing/kernel modifying thing.
I have a Nexus S now which i love but i need the Galaxy running for my AT&T company SIM card....
Also do i NEED ODIN?
There are like 4+ different button combos for Download Mode. If you search, I'm sure you'll find them all. The one I remember is:
1. Remove battery, SIM, microSD card (if you have one)
2. Wait at least 10 seconds with the phone off
3. Hold Volume Up/Volume Down keys, do not let go
4. While holding the volume keys, insert the battery into the phone
If this worked, the phone should almost instantly be in Download Mode.
Once in Download Mode, you want to use Odin (generally the One-Click JF6 version) to flash your phone to a working state again.
A JIG is a microUSB plug that will force your phone into Download Mode, if Download Mode is still possible on your phone. You can make them with a MicroUSB plug and resistors, or buy one. The link in my signature is an example of what a purchased one would look like.
I was trying to switch to Cognition V.2.3.8 using clockwork recovery like was shown on that thread. I did everything correctly and everything worked exactly like was explained. I got to where it was loading the zip in clockwork mod and it froze. Now my phone only gets the ATT screen when turned on and it takes a lot of tinkering to get it to just the recovery screen, but the phone is cleared, nothing will boot, all info was wiped I'm assuming that's including the previously flashed version of cognition. I tried Odin but couldn't really get it going. Not sure what to do. I used Odin for my last ROM, and clock work recovery didn't go quite as well obviously. Please someone give me some good news, and help me unbrick my phone.
Have you tried doing any of the three button combos to get into download mode and restore to stock possibly?..if none of the buttons work, you might have to make/use a jig to get it into download mode. Anyway, just try getting into download and try to restore to stock for now.
Your phone needs to be in "Download" mode to use Odin.
http://forum.xda-developers.com/showthread.php?t=884364
Scroll down to step 1 and try those "Key Combinations" until one of them gets you into download mode. Once you are in, flash back to stock with Odin. Hopefully that works and solves your problem.
If no key combos work, then you need a jig. My phone is one of the few that don't work with the key combos, while my last 2 did fine.
http://forum.xda-developers.com/showthread.php?t=889128
Like the others stated you need to be in DOWNLOAD MODE to get Odin to work.
Also there is a specific method to get Odin to recognize your device and then flash it back to stock:
Turn on ODIN first.
Do NOT have your phone plugged in when Odin is started.
Make sure your phone is powered off.
Hold down the Volume +/- Buttons on your phone then plug in your USB cord. It should go directly into DOWNLOAD MODE and Odin should state that your phone is connected.
Click the Go button and watch Odin do it's magic.
If that didnt work....
Try the "Battery Trick"
Unplug the phone from USB - Power it off.
Pull the battery, SIM, and SDCard (if applicable) from your phone.
Turn on Odin
Plug in the phone to USB Cord (with everything still out of it)
Hold down the VOLUME +/- Buttons
Then while doing all this - pop the battery back in the back of your phone.
Rinse and repeat a few times if it doesn't go directly into DOWNLOAD MODE to make sure you are doing this correctly.
And if THAT doesn't work.
Do the jig (Build a jig - there are a ton of posts here in the Q&A and Q&A sticky on how to do this.)
Hi,
I wonder if someone can offer me some help, i had my captivate rooted and i had cognition rom on it, i tried to update to a different rom and while i was using the ODIN the usb came loose and then the phone froze at yellow page with the shuffle, then i tried to put in the download mode by holding the power and up and down button then put the usb and then the battery, the computer do not see the phone also i only get this phone ! Computer, i hope i did not brick the phone.
Thanks for the help.
I'm replying to my own post: After i posted my question i tried to put the phone in the download mode by holding the up and down buttons without holding the power button and put the usb then the battery and it was successful.
That's normal
haithamelbedawy said:
I'm replying to my own post: After i posted my question i tried to put the phone in the download mode by holding the up and down buttons without holding the power button and put the usb then the battery and it was successful.
Click to expand...
Click to collapse
Just so you know, holding only the volume up+down and then plugging in the USB is the normal way of putting it in Download Mode.
The volume up+down AND power button is the normal way of putting it into Recovery Mode, not Download Mode.