Related
Is anyone having basic build quality issues with the NC hardware? I just exchanged my first one because it had a mushy power button that didn't click, and the replacement i find makes a creaking noise whenever i grab it by the left side. I know it's going to drive me crazy if I don't exchange it again.
I haven't experienced any of those... in fact I find the construction to be quite solid. Bad batch maybe?
I returned my first Nook Color because there was a dust speck in the screen. I couldn't rub it out and it kept bothering me so I brought it back to B&N and they gave me a brand new one. I wonder what they will do with the one I gave them. Everything seemed to work except that one dust particle in the screen.
Mine had a dead pixel which awoke after a bit of use, but other than that (and I'm picky) it's been really solid. The touchscreen is a bit wacky at times, but that could be me - I have extremely dry skin and that can cause issues.
bruceleroyjr said:
I returned my first Nook Color because there was a dust speck in the screen. I couldn't rub it out and it kept bothering me so I brought it back to B&N and they gave me a brand new one. I wonder what they will do with the one I gave them. Everything seemed to work except that one dust particle in the screen.
Click to expand...
Click to collapse
this plus the frame on my first was loose and the sd door magnet didnt work right my girlfriends (bought at same time) has no issues
milkham said:
Is anyone having basic build quality issues with the NC hardware? I just exchanged my first one because it had a mushy power button that didn't click, and the replacement i find makes a creaking noise whenever i grab it by the left side. I know it's going to drive me crazy if I don't exchange it again.
Click to expand...
Click to collapse
Funny, I am having the exact same issue with my NC. Creaky left side. Kinda makes a 'click' noise in about a one inch spot on the left middle by the screen. Kind of annoying but I suppose I'll live with it..
Definitely experiencing the creaking as well, and now I am noticing the back left side has some 'give' to it, allowing me to actually push it in slightly. The right side is perfectly firm. Anyone else notice this? Only had it for a few days, so if this is an isolated issue I will return/exchange it.
Thanks
+1 mushy power button here too.
no dead pixels though so I think i'm going to keep it.. I've got 'QuickBoot' installed anyways as a workaround
Mine is creaky, too. Everything that matters (to me) appears to be working well.
The top frame may be a 'snap-on' thing that snaps-on from right to left resulting in a bit of a space on the left side about a 1/3 of the way up. I'm sure most folks are sensing/feeling/hearing the 'creak', especially when moving through different ambient temperatures.
Touch and squeeze most of your devices (notebooks, phones) that are composed of different materials, e.g. plastic and metal, and, more than likely, they 'creak', too.
I have the creaking too. I thought about exchanging it but I don't really notice it anymore.
I returned my first nook color because of the creaking on the right side. It only happened after the device warmed up.
The second one is now doing the same thing on the left back. As much as I love it, it doesn't seem very solid.
sent from my NookColor using tapatalk
Yeah i've got the creak top left corner. Doesn't bug me much but I do plan on keeping an eye on it.
I've got the creaky left side too. It hasn't bugged me too much, but the USB cable did catch on fire when I plugged it into my Nook this morning.
So that was fun.
mtmyers said:
I've got the creaky left side too. It hasn't bugged me too much, but the USB cable did catch on fire when I plugged it into my Nook this morning.
So that was fun.
Click to expand...
Click to collapse
Huh?
10 char
The first NC I brought home had a dust particle right in the middle of the screen, too. Exchanged it, and the new one creaks right below the N button. No power button issues, though!
mtmyers said:
but the USB cable did catch on fire when I plugged it into my Nook this morning.
Click to expand...
Click to collapse
Ahaha, funny joke. !.
I'm thinking of returning mine too. I have creaking. Anyone else have a bowed panel where the home button is? The left side is about a 0.5 mm lower then the center and the right side is about 0.25 mm lower then the center.
Such a shame. It is nice device. Its the best built android device I have seen.
mrintegrity said:
Ahaha, funny joke. !.
Click to expand...
Click to collapse
Seriously, the USB cable sparked and caught fire when I plugged my Nook Color into it this morning.
It didn't appear to damage the Nook, but the USB cable end is burnt and blackened.
Needless to say I'll be taking it back.
I'll take some pictures in a bit.
Took some pictures, I'll post them when I get 8 posts under my belt and can post pictures.
mtmyers said:
Took some pictures, I'll post them when I get 8 posts under my belt and can post pictures.
Click to expand...
Click to collapse
You know, that actually doesn't sound far fetched to me. For some reason the USB cable does not want to work in 2 of my known working USB slots. Windows gives me the standard "USB root hub has detected a power surge" message. So it wouldn't surprise me at all if it caught fire. I plan on seeing about a third party cable if I keep running into weirdness with it.
For anyone having the infamous left side screen lift issue. This includes being able to physically see the glass protruding the silver bezel, screen sponginess, and being able to hear the screen stick/unstick from the adhesive.
After reading this thread http://forum.xda-developers.com/showthread.php?t=1800418 it is apparent the screws are a hair too long. When tightened all the way, they actually can press the screen glass out.
The easiest thing for anyone to try is to just LOOSEN the screws just 1/4 turn. You are loosening the screws so very little, that they will stay snug as far as holding what they are supposed to, but they will no longer push out on the screen glass. I didn't even bother with finding a screw driver, and just used my pocket knife. My screen was raised in the very middle of the left side, so I only loosened the 2 screws directly under the seperation. I suppose this will not work for everyone, but it's so simple and only took me less than 2 mins, you might as well give it a shot. Good luck!
Great thanks
Sent from my Nexus 7 using Tapatalk 2
If you're going to loosen screws you probably want to Loctite them.
http://forum.xda-developers.com/showpost.php?p=29457665&postcount=41
eh hem...what gave you this idea? jk
Just don't overdo it and you'll be fine. No need for loctite, it's only a small turn and the screws are still plenty secure.
---------- Post added at 12:29 AM ---------- Previous post was at 12:28 AM ----------
Loosening the screws in some areas will also help with backlight bleed. If you notice a spot near a screw that is really bright, it's most likely a little too tight.
I found this out by testing different "tightness" adjustments. When I went too far, I noticed back light bleed starting to show, loosen it up a bit and it went away.
This actually worked! So far, anyway. We'll see if it's a permanent fix, but it looks promising.
ferris2375 said:
http://forum.xda-developers.com/showpost.php?p=29457665&postcount=41
eh hem...what gave you this idea? jk
Just don't overdo it and you'll be fine. No need for loctite, it's only a small turn and the screws are still plenty secure.
---------- Post added at 12:29 AM ---------- Previous post was at 12:28 AM ----------
Loosening the screws in some areas will also help with backlight bleed. If you notice a spot near a screw that is really bright, it's most likely a little too tight.
I found this out by testing different "tightness" adjustments. When I went too far, I noticed back light bleed starting to show, loosen it up a bit and it went away.
Click to expand...
Click to collapse
Lol yeah I saw your posts. I mean, that's the same thing I thought of right away. The washers seemed to be a stiff foam, so they compress when screws are tightened. I figured I could loosen them but at the same time keep them snug.
But yeah man good stuff. Did it work for ya?
This.
The washer idea is smart, but for me it caused a more annoying problem. The frame was too thick and pulled the silver trim piece away from the screen and caused a creaking noise at the slightest touch that was way worse than the screen lift.
I just loosened every screw and tightened them back with basically no torque after they stopped turning. All is good now, no creak from the trim and no screen lift, though it's basically flush on he left side
Sent from my Nexus 7
jweitzel24 said:
This.
The washer idea is smart, but for me it caused a more annoying problem. The frame was too thick and pulled the silver trim piece away from the screen and caused a creaking noise at the slightest touch that was way worse than the screen lift.
I just loosened every screw and tightened them back with basically no torque after they stopped turning. All is good now, no creak from the trim and no screen lift, though it's basically flush on he left side
Sent from my Nexus 7
Click to expand...
Click to collapse
Cool. So did you end up loosening the screws then? Meaning, when you re-tightened them, you didn't tighten them as tight as they were from the factory?
Very interesting... I thought the glass was supposed to be flush with the bezel, until I read your comment. After looking at it, the left side of my glass is also flush with the bezel, while the right side glass sits just a little lower.
That's no big deal to me though, as long as my screen is seated properly.
jaycustom said:
Cool. So did you end up loosening the screws then? Meaning, when you re-tightened them, you didn't tighten them as tight as they were from the factory?
Very interesting... I thought the glass was supposed to be flush with the bezel, until I read your comment. After looking at it, the left side of my glass is also flush with the bezel, while the right side glass sits just a little lower.
That's no big deal to me though, as long as my screen is seated properly.
Click to expand...
Click to collapse
Probably a little lighter than factory. Honestly, mine wasn't bad to begin with but like every other ocd person on here, I just couldn't resist opening it up and tightening the screws. At that point, the screen lift started getting worse and I moved on to the other half-dozen or so "fixes" when, it turns out, the screws being too tight was making everything way worse.
But yeah, its been a couple hours now and it still feels real solid. I've got a tpu case on order so regardless I'm done messing with it.
Sent from my Nexus 7 using xda app-developers app
jweitzel24 said:
Probably a little lighter than factory. Honestly, mine wasn't bad to begin with but like every other ocd person on here, I just couldn't resist opening it up and tightening the screws. At that point, the screen lift started getting worse and I moved on to the other half-dozen or so "fixes" when, it turns out, the screws being too tight was making everything way worse.
But yeah, its been a couple hours now and it still feels real solid. I've got a tpu case on order so regardless I'm done messing with it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Cool beans. Luckily, like your N7, mine wasn't bad either.
Couldn't really tell it was lifted by looking at it, but it was the sponginess and that horrible stick/un-stick sound. This is the first fix I tried, and luckily it worked. Let me know how yours turns out, with or without the case..
I simply loosened all screws then tightened them up. Also, Part of a sponge bumper was tucked under a copper shield which I untucked.
Now when I push hard on the left part of the screen I don't get the tacky sound when i unpress it. Also, screen isn't as bulged. In fact you can't even tell anymore.
Neither was a real problem on my n7 but I prefer to make it perfect. This solved everything.
MikeMurphy said:
I simply loosened all screws then tightened them up. Also, Part of a sponge bumper was tucked under a copper shield which I untucked.
Now when I push hard on the left part of the screen I don't get the tacky sound when i unpress it. Also, screen isn't as bulged. In fact you can't even tell anymore.
Neither was a real problem on my n7 but I prefer to make it perfect. This solved everything.
Click to expand...
Click to collapse
Awesome. Mine wasn't bad either, so I just tried for something simple. It seems like the screws may be too long and pressing on the glass, so I thought to just back them off a hair. 2 minutes later the screen is perfect
jaycustom said:
Awesome. Mine wasn't bad either, so I just tried for something simple. It seems like the screws may be too long and pressing on the glass, so I thought to just back them off a hair. 2 minutes later the screen is perfect
Click to expand...
Click to collapse
If you take one of the screws out near the central left and shine a light straight down, you will notice that it is open on the other side as in the the screw can pass through. You will also see a portion of the LCD sticking out underneath those screw holes.
I think the LCD isn't suppose to stick out and get underneath the holes, because otherwise the screws won't hit anything and be tightened all the way. I think for some people without screen lift, the partially sticking out LCD might have been crushed and deformed with the screws or the LCD just isn't sticking out as much.
I've been screwing (pardon the pun) about with this some more today, what I have noticed with mine, is if I take the back off and remove all screws the screen sits perfect, put the screws back in, still seems perfect, clip the back on and the screen now sits above the frame on the left, wondering if mine is an issue with the back plate pushing something out of line.
This worked for a while for me but after it heated up the spongy noise returned. HOWEVER I did notice that loosening the screws did fix the touchscreen issue where it was unresponsive at times.
jaycustom said:
Lol yeah I saw your posts. I mean, that's the same thing I thought of right away. The washers seemed to be a stiff foam, so they compress when screws are tightened. I figured I could loosen them but at the same time keep them snug.
But yeah man good stuff. Did it work for ya?
Click to expand...
Click to collapse
Haha. I was just messing with ya. This is certainly better than adding a shim but I never had the problem. I just wanted to test this out and take my screws back a bit just in case. The other fix is not the way to go as it screws up the casing.
Still no issues though.
Sent from my Nexus 7 using Tapatalk 2
Summerfly said:
If you take one of the screws out near the central left and shine a light straight down, you will notice that it is open on the other side as in the the screw can pass through. You will also see a portion of the LCD sticking out underneath those screw holes.
I think the LCD isn't suppose to stick out and get underneath the holes, because otherwise the screws won't hit anything and be tightened all the way. I think for some people without screen lift, the partially sticking out LCD might have been crushed and deformed with the screws or the LCD just isn't sticking out as much.
Click to expand...
Click to collapse
Thanks for this.
I'm going to open it up again and consider using mini-washers, or something, just to ensure my now-tightened screws are not pressing on the LCD.
Genius. Popped the back off with a knife, loosened the screws down the left side of the screen a quarter of a turn, and now it's perfect - no more squeaking, no more raised screen. Took about 2 mins to do it.
Also, for those who want a decent cover, I bought a Belkin case from PC World yesterday (quite pricey at £30 but I like to try these things out before I buy them rather than just buy online). Even though it's designed for the 7" Samsung Galaxy Tab, it's a near-perfect fit for the Nexus 7. Speaker cut-out is in the wrong place but it doesn't affect the quality noticeably (besides, I hook mine up via Bluetooth to a Jawbone Jambox). Also got myself a sat nav mount and stuck it on the wall next to my bed, so my Nexus 7 is now a handy portable TV
I fixed mine without even getting inside. Just used a blowdryer and heat up the side while holding the screen down. Seemed to stay put and still is.
Simply awesome, completely fixed that annoying screen bulge on the left side!
I made this comment in the impressions thread but am trying to bring more light to it...
Put your phone face down, rub your thumb on the upper half of the phone, does it creak at the top? Its almost like the rear glass wasn't put on properly on my device - it creaks like plastic. I'm really surprised by this since most reviews say the thing is completely creak free. And yes its somewhat annoying because I can hear the creaking more and more when I am just handling the phone....
Thanks
Edit - made a video.... now that its happening more often it seems to be due to the plastic/rubber trim (which goes around the phone) not fitting properly, its flexing between the front and rear glass. BLah, I wish I had a bumper to see if that would minimize the issue. Its very noticable now. I added a 2nd video on youtube.
www.youtube.com/watch?v=zT_JhcS90eI
Hope people will be able to answer this if the phone creaks at all I don't think I'll get it
Sent from my SGH-T999 using xda app-developers app
No creaking at all from my device. The power button is a little wiggly tho...not as solid as the volume rocker which is kind of annoying, but not a deal breaker or anything.
dbdynsty25 said:
No creaking at all from my device. The power button is a little wiggly tho...not as solid as the volume rocker which is kind of annoying, but not a deal breaker or anything.
Click to expand...
Click to collapse
This +1
Stand on your head and rub the left corner counter clockwise.... Do you hear that noise? Come on guys.... really?
But to answer your question no mine does not creak perhaps you should return if you rub the back of it a lot.
Nope, no sort of creaking with mine in any form, and the buttons are all very firmly in place. The whole device feels extremely sturdy and well built.
Get a life or get out more there are more important things in life
asasione said:
Get a life or get out more there are more important things in life
Click to expand...
Click to collapse
You're an idiot - I started the thread to get real comments...
As my original post says, it occurs in regular situations when handling the phone. There is a creak on upper half of the rear or top of the device. It's annoying to spend any substantial amount on a device and have it creaking when new. I'll try to make a video later.
The buttons are fine on mine though - no issues there.
asasione said:
Get a life or get out more there are more important things in life
Click to expand...
Click to collapse
I mistakenly thanked your post but that I feel the opposite.
We are on XDA and on the Nexus 4 forum, it isn't like the OP is making a huge deal out of it. He is just wondering if any other people have been experiencing the same issue.
People post on these device-specific forums to discuss about the particular device, people are well aware that there are things in life outside of smartphones without you having to point it out.
it is completely solid, power button doesnt wiggle, there is a bit of a rattle when tapping the top but thats the camera lens I assume (only rattles when tapping near the camera)
Yeah I don't think it should be creaking at all, especially since the back is glass and non-removable. As you said, it probably wasn't put on right. I would wait a couple of weeks until this whole order fiasco is fixed before calling about doing a warranty exchange.
idividebyzero said:
it is completely solid, power button doesnt wiggle, there is a bit of a rattle when tapping the top but thats the camera lens I assume (only rattles when tapping near the camera)
Click to expand...
Click to collapse
Same here.
vexx786 said:
Yeah I don't think it should be creaking at all, especially since the back is glass and non-removable. As you said, it probably wasn't put on right. I would wait a couple of weeks until this whole order fiasco is fixed before calling about doing a warranty exchange.
Click to expand...
Click to collapse
Agree - especially when the majority of people say its extremely solid. I'll post a video later tonight (I'm at work right now) so people can have something to relate to...
Added a video for you guys....
www.youtube.com/watch?v=zT_JhcS90eI
dale_cooper said:
Added a video for you guys....
www.youtube.com/watch?v=zT_JhcS90eI
Click to expand...
Click to collapse
Mine creaks on the bottom
mine doesn't creak at all. Of course I don't sensually rub mine on the top of the glass where there is no touch feedback, but to each his own.
hondarider525 said:
mine doesn't creak at all. Of course I don't sensually rub mine on the top of the glass where there is no touch feedback, but to each his own.
Click to expand...
Click to collapse
lol...
It creaks under real world situations if I grip the phone on both sides to turn on power it will flex and creak. If I grip with my index finger on top of the phone and fingers on both sides on the top, it creaks.
My phone doesn't creak no matter how I hold or press on it
Sent from my Nexus 4 using xda app-developers app
seriously? cmon guys...u guys look for annnnny thing to ***** about. no device is perfect...
No creak, wobbliness, dead pixels, shaky mic, but I do have that line in the top right in the plastic. I kinda like it, it gives the phone character.
I don't know if anyone else has this problem but when I hold my phone with my pinkie supporting the bottom, the bezel flexes and makes an audible and annoying clicking noise. All I did to fix it was loosen the screws like 1/8 of a turn. They were just a hair too tight.
Sent from my Nexus 4 using xda premium
what tools did you use? cuz i dun have the screwdriver for it....an alternative maybe?
was wondering if anyone else was having this issue.
mine does the same thing. annoying creak and spongey feel.
mines just makes the noise
mine is on top left corner lol D:
nivlac978 said:
I don't know if anyone else has this problem but when I hold my phone with my pinkie supporting the bottom, the bezel flexes and makes an audible and annoying clicking noise. All I did to fix it was loosen the screws like 1/8 of a turn. They were just a hair too tight.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I did it a bit different. I loosened up the screws, pressed glass down and pressed bezel into the phone, and then screwed the screws back just as they were before
I have the same creaking noise and slight flexing. There also seems to be a little bit of separation between the silver part of the screen and the soft touch plastic side. I'll have to try AntonJart's solution and see it that works.
ugotproblemz said:
what tools did you use? cuz i dun have the screwdriver for it....an alternative maybe?
Click to expand...
Click to collapse
It looks like a T8 Screwdriver (or one of the T series anyways, not quite sure what size yet.) You can get them at a hardware store, but any size smaller than a T10 is kinda hard to find.
Jtaks said:
I have the same creaking noise and slight flexing. There also seems to be a little bit of separation between the silver part of the screen and the soft touch plastic side. I'll have to try AntonJart's solution and see it that works.
It looks like a T8 Screwdriver (or one of the T series anyways, not quite sure what size yet.) You can get them at a hardware store, but any size smaller than a T10 is kinda hard to find.
Click to expand...
Click to collapse
its a T5. only in precision sets.
Tightened up a little at both sides and there is still movement but no more clicking noise.
Sent from my Nexus 4 using xda premium
Mine creaked on the bottom right, I sent it back to Google it had a few other little niggles but my replacement is perfect.
AntonJart said:
I did it a bit different. I loosened up the screws, pressed glass down and pressed bezel into the phone, and then screwed the screws back just as they were before
Click to expand...
Click to collapse
Thanks for the trick, it worked for me.
AntonJart said:
I did it a bit different. I loosened up the screws, pressed glass down and pressed bezel into the phone, and then screwed the screws back just as they were before
Click to expand...
Click to collapse
You sir have sorted out my problem! I had this issue and was the only real fault with the device, unscrewed a bit to help didnt work so assumed I had to live with it, glad I found this thread and I cannot believe I didnt think to push the glass to, I thought my device was missing a support!.
A tiny gripe for the perfectionists. But I noticed after a day, that I had a couple of tiny little nicks in the aluminium. As the phone had just been lying on my desk and hadn't been taken outside it must have come that way. I didn't see them at first because they are on the edges and not on the back surface. It is very tiny and it was because it caught the light that I noticed it. I remember when the iPhone 5 came out there were scores of people with chips on the black iPhones that showed silver underneath. This is nowhere near as bad as that....just the light catching the fact that the surface is not quite flat. I had the same with an iPhone 4 a few years ago as well. Seems to me that aluminium is very dingable, even in the factory.
Anyone else notice this?
Mines fine so far, no complaints.
Sent from my HTC One using xda app-developers app
None really had a small black mark but managed to get rid of it quite easily
jonstatt said:
A tiny gripe for the perfectionists. But I noticed after a day, that I had a couple of tiny little nicks in the aluminium. As the phone had just been lying on my desk and hadn't been taken outside it must have come that way. I didn't see them at first because they are on the edges and not on the back surface. It is very tiny and it was because it caught the light that I noticed it. I remember when the iPhone 5 came out there were scores of people with chips on the black iPhones that showed silver underneath. This is nowhere near as bad as that....just the light catching the fact that the surface is not quite flat. I had the same with an iPhone 4 a few years ago as well. Seems to me that aluminium is very dingable, even in the factory.
Anyone else notice this?
Click to expand...
Click to collapse
What colour and is it possible that you post some pictures? I would like to follow this as would a lot of potential buyers Thanks, I have run out of thanks for the day
Please keep us posted about this
markj338 said:
What colour and is it possible that you post some pictures? I would like to follow this as would a lot of potential buyers Thanks, I have run out of thanks for the day
Please keep us posted about this
Click to expand...
Click to collapse
I tried to take a photo of it, but I am going to need someone at home to help me take the picture as its all about getting the light angled correctly so that its clear in the picture. So I will need someone to hold the phone at the right angle so I can get a picture to show. I will try and see if I can get a picture shortly. It is a silver phone, the only colour available right now.
It's not possible to make it 'perfect' so there will be slight defects.
Mine has a tiny little mark on the top that unless you really look for it in certain light its not possible to really see.
Unless there's a real dent or chip on the casing, it shouldn't be a problem. I know it can annoy perfectionists but man, that is aluminium, it is understandable (to an extent, of course)
yep, my silver came with tiny nicks..could feel them when i ran my fingers down the side.not there now [3 days later], maybe 'ironed' out lol
lezduur said:
yep, my silver came with tiny nicks..could feel them when i ran my fingers down the side.not there now [3 days later], maybe 'ironed' out lol
Click to expand...
Click to collapse
Haha...I hope the metal is not SO soft such that it would be possible!
I have wondered if a fingernail is able to nick the edges of the metal. The anodising is only on the back surface. So the bevelled edges will be more suceptible. It is the edge where I noticed a couple of tiny nicks.
I was reading that a fingernal has a hardness of 2.5 (on some scale that I forget the name of). And aluminium is 2.5-3. This would suggest a fingernail striking the edge of the phone could put a nick it. But I am not willing to try intentionally to do so!
jonstatt said:
Haha...I hope the metal is not SO soft such that it would be possible!
I have wondered if a fingernail is able to nick the edges of the metal. The anodising is only on the back surface. So the bevelled edges will be more suceptible. It is the edge where I noticed a couple of tiny nicks.
I was reading that a fingernal has a hardness of 2.5 (on some scale that I forget the name of). And aluminium is 2.5-3. This would suggest a fingernail striking the edge of the phone could put a nick it. But I am not willing to try intentionally to do so!
Click to expand...
Click to collapse
Mohs scale! Yeah, they do overlap on the hardness scale, and nails have a history of being able to scratch aluminum (take Macbooks, for instance).
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the silver lightly. looks like someones drawn a line with a lead pencil by the power button now. might try to buff it out but afraid if i wear the area down it will all go a dull grey.
jcb1985 said:
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the silver lightly. looks like someones drawn a line with a lead pencil by the power button now. might try to buff it out but afraid if i wear the area down it will all go a dull grey.
Click to expand...
Click to collapse
Note to self: Don't be lazy about cutting your nails once you get this phone.
Good call! :good:
jcb1985 said:
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the
Click to expand...
Click to collapse
My wife has damaged three buttons on 2 DAB radios and one remote control by that method.
Not even necessary to use a fingernail to operate the buttons, either.
jcb1985 said:
Yeah my wife came in the room yesterday and said when she pressed the power button, her finger nail scratched the silver lightly. looks like someones drawn a line with a lead pencil by the power button now. might try to buff it out but afraid if i wear the area down it will all go a dull grey.
Click to expand...
Click to collapse
Rule number 1: never let your wife come anywhere near your phone :silly:
compact_bijou said:
My wife has damaged three buttons on 2 DAB radios and one remote control by that method.
Not even necessary to use a fingernail to operate the buttons, either.
Click to expand...
Click to collapse
Have you ever tried growing your nails out super long? The pads of your fingers begin to cease to exist. :laugh:
This is weird. And yes aluminum does indeed has a weak mohs scale and that's the main reason why they anodize it. Now when anodized the mohs scale increases to 9 so how would a fingernail even scratch that?
i can assure you that it does scratch with false fingernails regardless of any specifications.
Riyal said:
This is weird. And yes aluminum does indeed has a weak mohs scale and that's the main reason why they anodize it. Now when anodized the mohs scale increases to 9 so how would a fingernail even scratch that?
Click to expand...
Click to collapse
I dont believe all of the aluminium is anodised though. The back surface certainly is. But there is a bevelled edge which is almost shiny like a mirror, and I think that area is not treated and is also where I found a couple of tiny nicks (seen when angled under a spotlight) out of the box. It is unfortunately also the most likely bit to be hit knocked, swiped with a fingernail etc.
jonstatt said:
I dont believe all of the aluminium is anodised though. The back surface certainly is. But there is a bevelled edge which is almost shiny like a mirror, and I think that area is not treated and is also where I found a couple of tiny nicks (seen when angled under a spotlight) out of the box. It is unfortunately also the most likely bit to be hit knocked, swiped with a fingernail etc.
Click to expand...
Click to collapse
Could you post a picture of that bevelled edge? I'm not sure what you're saying but HTC One is unibody. And when you anodize aluminum you submerge the whole body into a solution. So it's quite impossible that some parts get's anodized and some aren't.
I guess I have to cut all my nails b4 buying it lmao
Sent from my GT-I9300 using Tapatalk 2