Related
Hey everyone, PDAnet is now available for android!
http://junefabrics.com/android/index.php
PdaNet does NOT require root access or hacking your phone's firmware in order to work. It is just a regular Android application that works on all Android phones as-is. Currently this initial version supports USB tethering on the T-Mobile G1 phone. Tethering is secure and will also charge your phone at the same time. Your phone can either connect to 3G data or WiFi.
Click to expand...
Click to collapse
It works perfectly, and root access is not required.
Enjoy!
Good find! Works best with Opera browser (other browsers such as IE and Firefox, won't display pictures for some reason...) Has some connectivity issues when using longer than 5 minutes (yes, I have enable usb bugging enabled and stay alive while connected via usb) All and all, a good program for your laptop without draining your G1 or when the REAL internet goes out. Good find! Thanks! Also, incredibly simple to use!!!
EXE installer? WTF?! How does it work? Does the program require something on the computer-end too?
I'm Linux user, so I can't use it?
Yes, it seems to be only compatible with windows. Since you're in linux, you may try running it through WINE to see what happens.
andonnguyen said:
Yes, it seems to be only compatible with windows. Since you're in linux, you may try running it through WINE to see what happens.
Click to expand...
Click to collapse
Did you experience the pictures not loading problem also while using IE or firefox?
this doesn't really seem to work yet
I was able to install it without much trouble and the initial connection looked promising (well, some pages came up anyway).
It was basically impossible to connect to Speedtest.net however and Speakeasy only rated my connection at 287/283 kbps at best (the G1 was on WiFi). I tested it again with the G1 on 3G and got a 409/330 kbps (doesn't that seem weird that it would rate better on 3G?) but then it seemed to stop connecting somehow and I had to restart the program and reestablish the connection on the PC. After a few more minutes it happened again. I would call this basically not useful at the moment, but I hope they can work the bugs out and get some decent speed out of it.
For reference, using Tether WiFi to connect to the G1 over 3G Speakeasy rated the connection at 699/316 kbps. And in my experience it's stable/consistent.
As a disclaimer, this was on my work laptop which has some pretty hefty encryption software installed. While this may be the problem, I didn't have any trouble connecting initially (multiple times).
Additional:
Their "reviews" section is just "customer testimonials", as my honest yet critical assessment of the app's inability to perform as intended was NOT posted and they didn't even bother to drop me an email to try to sort out the problem. I hope they can improve on the app, but they're quickly losing my respect and interest.
I just got this. I dl it to my sd card, connect phone to pc w usb, ran exe through windows. Installed program automatically onto phone. Windows asks to install driver for g1 and it does the work from there.
It seems to work ok, the first few tries on my desktop it would disconnect after a few minutes, restarted phone and its been better but still only seems to stay connected for about 20 min, which should be ample time to do alittle websurfing without getting mad about disconnects.
well they might not have replied because they are aware of the problem, and they clearly state that this is beta software. if you look at the known issues the first one is about the connection dropping and having to reconnect.
once they work out the bugs this software will be pretty useful because of how easy it is to use.
if only i could plug the g1 into the 360 would save me $100...or if i could share the connection with my windows media desktop(i use it as a media server for my xbox and its not even close to a internet connection).
i tried to connect it but it does the network doesnt have sufficient MTU settings. xbox live requires a minimum MTU setting of 1364.
darn.
ill be watching for updates though, should be useful once fully operational.
i've been using mine for a while now...no problems once i turn off the wifi switch on my laptop...recently when i plug it in tho, it says PDAnet is expiring soon...is this supposed to be a paid app?
This app is gay... It was pretty good at first... but once the guy updated to r1.5... its been acting gay... it would come up with random blockings... it blocked www.google.com... wtf?... and wikipedia... yahoo answers... so I just got root and installed WiFi Tether for Root users... works way better and doesnt have blocks...
USB tether 4.2.6
This is supposed to be plug and play. A lot of people have said it's great. I have not been so fortunate. Anyway, could someone give me directions on how to use this. 1. plug in phone via USB. 2. settings/wireless settings/ internet tether (on). 3. Go to PC and click on G1Tether click connect. For me this does not work. Help.
This application is a fine hold-over for people who are too stupid to get root, but it is a VERY VERY poor imitation of tethering.
1) A real tethering solution will NOT require proprietary crap to be installed on the CLIENT.
2) Wired or Wireless tether for root users *IS* a *TRUE* plug-it-in-and-it-works solution. Run the program on the phone, plug in the wire, and you're done. No weird nonsense to be installed on the computer.
Anyone know of a good wifi tethering for a rooted captivate? If you don't know of a wifi tethering...what about a good USB tethering?
Thanks,
Chris
dinohaven said:
Anyone know of a good wifi tethering for a rooted captivate? If you don't know of a wifi tethering...what about a good USB tethering?
Thanks,
Chris
Click to expand...
Click to collapse
Wifi tethering is built into the leaked 2.2 rom. Just go to Settings > Wireless and network > Mobile AP
If not on 2.2, this is the best I've seen so far. http://code.google.com/p/android-wifi-tether/
USB tethering is built into the phone.
For 2.2: Settings > Wireless and network > Tethering.
For 2.1: Settings> Applications > USB Settings
Isn't the built in usb tethering in 2.1 so you can use at&t's subscription tethering service? If not I wasted $10 on EasyTeather. (which works like a CHAMP btw.)
PDANet adds the bonus of being able to text using your computer also. Costs more if I remember right.
For sure on froyo MobilAP is full of win.
Sulphur4724 said:
Isn't the built in usb tethering in 2.1 so you can use at&t's subscription tethering service?
Click to expand...
Click to collapse
Wouldn't know. I don't keep usb cables with me so I never bothered to try it.
Sulphur4724 said:
Isn't the built in usb tethering in 2.1 so you can use at&t's subscription tethering service?
Click to expand...
Click to collapse
No. There is no fee for using the usb tethering in 2.1
dayv said:
No. There is no fee for using the usb tethering in 2.1
Click to expand...
Click to collapse
/mutter (10 char)
Neither Hotsport nor Tether Works on Captivate
Hmm, so I tried "Wireless Teather" but failed to ever get the computer to recognize the wifi hotspot...any ideas there?
As for tethering direct from the USB, when I go to Settings > Applications > USB Connections, I only get the following:
Kies
Media Player
Mass Storage
Ask on Connection
No option to tether...
Ideas?
dinohaven said:
Hmm, so I tried "Wireless Teather" but failed to ever get the computer to recognize the wifi hotspot...any ideas there?
As for tethering direct from the USB, when I go to Settings > Applications > USB Connections, I only get the following:
Kies
Media Player
Mass Storage
Ask on Connection
No option to tether...
Ideas?
Click to expand...
Click to collapse
I think you select ask on connection and it pops up in that menu.
Sent from my Captivate
Samsung's i896 Captivate (Rogers version) allows for wireless tethering, stock:
Settings -» Wireless and network -» Mobile AP settings -» [hit the checkbox]
AFAIK, PDANet is a free-download:
junefabrics [dot] com/android/download.php [you know what to do]
This works for me, I've tested it: very easy setup.
Could it be, that the i897 (AT&T) rendition of the Captivate does not include wireless tethering by default...?
PhrProfess said:
Samsung's i896 Captivate (Rogers version) allows for wireless tethering, stock:
Settings -» Wireless and network -» Mobile AP settings -» [hit the checkbox]
AFAIK, PDANet is a free-download:
junefabrics [dot] com/android/download.php [you know what to do]
This works for me, I've tested it: very easy setup.
Could it be, that the i897 (AT&T) rendition of the Captivate does not include wireless tethering by default...?
Click to expand...
Click to collapse
On the firmware that comes with it straight from the box, it does not include it by default.
Sent from my Captivate
Hmm... fascinating.
Got WiFi Up and Running...But...
OK OK...thanks to the thread WIFI is up and running on the captivate (tethering I am still clueless). But I am using the latest version of WIFI TETHERING and it appears to be working fine. I am using wireless_tether_2_0_5-pre11.apk version on this site:
http://code.google.com/p/android-wifi-tether/downloads/list
BUT:
Here is the real pickle now....it works GREAT (about 2MBPS) until I try to bring a game up to play (like BF2). Then, the internet simply stops. Any suggestions on how to bypass this?
I know this sounds like a real trivial question...but the AT&T cap on data cards simply devastated our internet in my house (we live in the sticks). I am trying to find a good alternative.
To summarize:
Internet now works on WIFI until I try to bring a game up to play (like BF2). Then, the internet simply stops. Any suggestions on how to bypass this?
One possibility for you would be to install Cognition. It enables both Mobile AP and USB Tethering, among other things. You have two choices, Eclair or Froyo. Cognition 2.1.7 is Eclair and includes the JH7 rom update. This version is completely stable. The Cognition 2.2 Froyo beta versions are also good but there are a couple of issues.
I have had Cognition 2.1.6 installed since the day Froyo was first leaked. I decided not to intall Froyo until the release version is available. My version of Cognition runs fantastic. There are zero issues.
When you have USB Tethering insatlled, there will be an additional option in the USB Settings screen: Samsung Kies, Media player, Mass storage, "PC Internet" and Ask on Connection. PC Internet is the Tethering option.
I havn't used either wifi mobile ap, or usb tethering much, so I don't know how well either of them works, but just thought this might be one possible solution for you to try.
Creepy...
I like where you are going Creepy...but I have yet to see detailed instructions on how to install the ROM. I have done it on many phones, but Captivate step-by-step instructions seem to be lacking...
You have a good link to that??
dinohaven said:
I like where you are going Creepy...but I have yet to see detailed instructions on how to install the ROM. I have done it on many phones, but Captivate step-by-step instructions seem to be lacking...
You have a good link to that??
Click to expand...
Click to collapse
Go to the thread and the first post click on faq's
Sent telepathically using vulcan mind meld app.
dinohaven said:
I like where you are going Creepy...but I have yet to see detailed instructions on how to install the ROM. I have done it on many phones, but Captivate step-by-step instructions seem to be lacking...
You have a good link to that??
Click to expand...
Click to collapse
I believe there may be an easier way. I think I remember seeing a thread in the apps and themes forum about a ported mobile AP app from one of the i9000 roms. I could be wrong of course. I'd find the link but I just woke up and am now planning on passing out again
Sent from my Captivate
dinohaven said:
I like where you are going Creepy...but I have yet to see detailed instructions on how to install the ROM. I have done it on many phones, but Captivate step-by-step instructions seem to be lacking...
You have a good link to that??
Click to expand...
Click to collapse
You probably already found this, but, you would be installing from stock 2.1 I believe, so here. This rom is drop dead easy to install:
http://cognition.theidiotshideout.net/mw/index.php?title=Main_Page#From_2.1_Eclair
Did you see this thread in Capitvate general? It might also be an alternative for you. I installed the full Kies program downloaded from the Samsung UK site at one point. I didn't keep it though, because I didn't need it. My PC is Windows 7. There's another thread somewhere, a sticky I think or was a sticky, about downloading and installing kies from the Samsung UK site. http://forum.xda-developers.com/showthread.php?t=731325
when i plug in the usb i get
when i plug in the usb i get
kies
media player
mass storage
there is no tethering option, please help, im totally lost and am a total beginner with the computer. walk it out slow, i have been workin on this for days and am getting nowhere.
dinohaven said:
Anyone know of a good wifi tethering for a rooted captivate? If you don't know of a wifi tethering...what about a good USB tethering?
Thanks,
Chris
Click to expand...
Click to collapse
I have both working setup yesterday via Perception. All I did is go to Wireless and Networks and chose MobileAP. That's for the wireless. Then for the usb, I chose Tethering. My windows installed an Samsung NDIS driver for the device.
It works perfectly on the internet. However on VPN, it works but I get disconnected in less than 2 minutes. I am able to remote desktop to a Windows machine as well as ssh to a unix machine but after a minute, my access is gone. The remote machine wouldn't respond anymore. I had to disconnect my VPN then reconnect again. Not sure why.
I can't speak for the stock ROM since I've been on Cognition for quite a while and now Perception. However, I just tried the USB Tethering on Perception... plugged in the USB cable, selected Mass Storage... then went into Settings->Wifi->Tethering and turned on USB Tethering. Took Windows a minute to install the drivers and whatever else it decides to do when you plug something new in and withing about a minute and a half, was connected to the internet via my phone. (typing this on it right now actually)
I believe Cognition had the same option available... but can't be 100% sure since I never used it prior to just now.
Have also used the wifi tethering without issue since some of the earlier cognition 2.2 releases.
perhaps somebody here could be tolerant enough to assist or direct me to concise clear info to such a likely passe situation.
Phone again, stock from VZW and fully updated.
Barnacle installed from market.
I have a few questions;
1)Superoneclick seemed to only install "superuser" on my phone. Does this mean the busy box and abd things, of which I have no idea what to do with, is only accessible via my win7 64 bit pc while the phone is connected to it via usb?
2)How do I optimize this phone with stock rom and remove "bloatware" as well as eliminate intrusive programs? Are there any threads which ID these as well as their functions?
3) Jrummy Droid Overclock installed, several versions in fact, and the best I could do was make the phone extremely laborious and finally reverted back to stock settings before uninstalling. I did have to click the "experimental" box to make it able to scale the stock rom.
Any thread or info as to some failproof settings to make this stock thing work much better/faster?
4) Can this phone, usb tether the data connection without any paid apps or limitations regarding secure sites and such?
Interestingly enough, I'm finding the search functions on this forum to be impossible on my handheld and just about the same from my pc. From the handheld, it wanted me to assemble pix which my touchscreen or keyboard didn't seem to allow.
From the pc, 'no matches found' or something to that affect.
Also, when I was having problems recalling my login info, had almost given up deciding instead to reregister, I got a denial message based on having a verizon wireless IP. Weird.
I'm rereading the beginners info and it would be nice to be able to simply make my stock rom'd droid better.
Feel free to tell me if I'm pissing in the wind and need to just do different roms and or kernals. However, I'd like to just keep it simple for now.
You are able to download Busybox straight from the Android Market: https://market.android.com/details?id=stericson.busybox&feature=search_result
You can tether your phone to create a wireless hotspot, but I'm not 100% sure about USB tether.
skadude66 said:
You are able to download Busybox straight from the Android Market: https://market.android.com/details?id=stericson.busybox&feature=search_result
You can tether your phone to create a wireless hotspot, but I'm not 100% sure about USB tether.
Click to expand...
Click to collapse
Yes and thanks, I snagged barnacle for that. It works fine although I'm either too green to make it secure, or the WEP stuff is broken.
That is why I'd like the option to have a more secure hardwire tether.
I know I can do pda.net and some other apps, it seems to me that it should be able to do that perhaps just with some tweaks.
So when I extracted superoneclick on my pc, I see busybox and such in that file. I just did the one click and nothing else, not even on my phone.
It is interesting how fast such basic topics become inundated with miles of confusing info to bewilder a virtual computer twit.
It looks like what you want to do is basically create a wireless hotspot with your phone? Because I use Wireless Tether for Root Users and I am able to encrypt it and set up a secure connection.
Here's what I pulled from the Barnacle website:
How do I use WEP?
Barnacle support 40 and 104-bit WEP. In Settings find Wireless Security and enable WEP, then type in the key. For 40-bit WEP, type in 5 ASCII characters or 10 hex digits. For 104-bit WEP, type in 13 ASCII characters or 26 hex digits. Passphrase is not supported.
Click to expand...
Click to collapse
skadude66 said:
It looks like what you want to do is basically create a wireless hotspot with your phone? Because I use Wireless Tether for Root Users and I am able to encrypt it and set up a secure connection.
Here's what I pulled from the Barnacle website:
How do I use WEP?
Barnacle support 40 and 104-bit WEP. In Settings find Wireless Security and enable WEP, then type in the key. For 40-bit WEP, type in 5 ASCII characters or 10 hex digits. For 104-bit WEP, type in 13 ASCII characters or 26 hex digits. Passphrase is not supported.
Click to expand...
Click to collapse
Phone Settings? "no "Wireless Security" to be found nor did I readily find anything to do with WEP under the Wireless sections.
Barnacle? Again, no "Wireless Security" section found. There is a "Wireless Encryption" settings section. I did enable it with the app stopped and set a five digit alpha code. Restarted Barnacle and my pc completely disregarded it, connected to it with no input required and the signal still shows as unsecured and public.
I'm pleased that it tethers, I would like to make it secure and I would also like to easily usb it to any laptop or pc sans having to load software on them unless said pc/device was older and didn't automatically recognize this phone, as this new win 7 pc did, where upon loading some drivers would be seem reasonable.
I'm not pc/droid knowledgeable enough to know if this is dreaming but, it seems reasonable that it's usb output could be toggled and be seen as a modem connection.
I'm sure it can, but people use Wireless tethering more than a physical USB tethering.
I've never actually used this, but I've heard of people using it when they need to tether via USB: https://market.android.com/details?id=com.mstream.easytether_beta&feature=search_result
Yes and thanks, I truly appreciate your efforts to help and your tolerance for my ignorance.
I am aware of those various usb tethering programs and I suppose my question is why must software be loaded on a device capable of seeing other usb plugged connections and run them 'plug and play'?
I'll see if somebody with barnacle can assist me with the WEP issue. I've tried it several ways and have had no success. Possibly related, my droid no longer will send MMS. It still receives them, just no longer sends. I wish I could say if that occurred after rooting or after attempting overclocking, but, it happened after one or both.
Wait, does the Easy Tether not require software to be installled on usb tethered device? I was sure it did and after reading the page, it doesn't mention it.
It's still bizarre that I can wirelessly tether now that soc rooted it, but I still have to buy an app to usb tether it, and I was pretty sure, install stuff on device to be tethered.
No problem, anytime!
Honestly, I don't know much about Easy Tether, I've heard about it, but have not delved much deeper into it.
What ROM are you using (if any)? I know that I had some issues with CM7 and a little bit less with Cronos right now, where I send a text message and it hangs with "Sending..." for hours at a time.
How much did you overclock your phone by? What vsel?
Sent from my Milestone using XDA Premium App
phone is stock other than being rooted
I used JRummy's Droid Overclock as it is supposed to overclock a stock rom'd A855 droid.
I tried several several many settings, mostly what was recommended, but none of them seemed to make it better, and if they did, I couldn't seem to make them stick upon rebooting.
Kept all attempts at or below 800MHz.
I'm sure it's my lack of understanding and likely there are some simple settings that will speed it up with just a few clicks as well as save thru a fast and speedy reboot.
Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
TaylorofCanada said:
Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
Click to expand...
Click to collapse
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Wow thanks.
That's very complete. One questions though... I didn't mention this, but I am a registered WP7 dev and can unlock this device using my dev access. Can I load any of the XAPs directly instead of having to crack my phone?
Thanks,
Taylor
Yeah, you have limited access to installing xaps, but you will still need to interop unlock and use root tools to give higher level access to WinTT, so your best starting from scratch,
Sent from my SGH-i937 using XDA Windows Phone 7 App
Unable to understand the process
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
abhijeetmohan06 said:
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
Click to expand...
Click to collapse
ok, first things first.
You won't brick your device, at worst a hardrest all remove all changes you can do, our device, the focus S, isn't fully unlocked, so there are limitations to the amount of damage you can do by arseing it up. With that behind us you have to learn what you are about to do, there isn't a simple way.
So, start by knowing these basics, then read through the guide, any bits you don't understand feel free to ask.
1, AT&T locked your internet connection sharing, so you must re enable that
2, To enable ICS, you must make changes to the registry
3, Microsoft locked you out of making changes to the registry, so you must gain access to do it
4, AT&T left a security hole allowing us to make changes to allow us to change things like registry
5, using that hole we can install software that will give us more access, that software can then allow us to remove the AT&T lock on ics
These things you must do, there is no magic answer, there has been some short cuts made but this in some cases has had a negative effect, such as losing 3g, doing as I said will not have any effect on your signal or anything else
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Have you guys noticed any of the following....
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
7carisfast said:
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
Click to expand...
Click to collapse
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489# ***DOES NOT WORK ON i937***
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
dazza9075 said:
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489#
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
Click to expand...
Click to collapse
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
7carisfast said:
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
Click to expand...
Click to collapse
indeed, so it would seem, many of the diagnostic codes have been disabled which is a pain, even the ones that are left don't always do what you expect them to do
8773 update
dazza9075 said:
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Click to expand...
Click to collapse
What if I have already updated to version 7.10.8773.98, is there any other possible way? I don't need any other features. Thanks in advance.
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
dazza9075 said:
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Click to expand...
Click to collapse
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
kholio88 said:
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
Click to expand...
Click to collapse
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Samsung Firware Update
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
Dazza,
Kudos for your help as you personally worked with me through this information. Not sure the Samsung update is a concern as I'm running fw2103.11.10.1 and everything works great.
Thanks again.
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
kholio88 said:
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
Click to expand...
Click to collapse
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Found a solution =D
dazza9075 said:
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Click to expand...
Click to collapse
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
kholio88 said:
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
Click to expand...
Click to collapse
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
dazza9075 said:
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
Click to expand...
Click to collapse
Well I tried that, but there is no definite answer to it, sometimes I turn it on and off on and off many times without needing to restart and throughout the whole day, and sometimes it works once and doesn't at the second try. So it all comes down to luck, but still better than nothing
Now the thing is I'm afraid that when the 7.8 update comes, they would fix this glitch =D Haha.
PDAnet is able to directly share internet over USB, but it seems limited in what it can do. I can hardly connect to any game servers, steam's download speeds are slow (Figured it may be some Steam port issue but I also have problems with Origin so I'm unsure), and I can't directly connect to other peoples lobbies. I'm using Ver 5.10.5 of Pdanet (and have paid version) and am wondering if anyone knows a possible solution. I tested connection with built in USB tethering and I was able to connect, but I'd rather not blow through the limit for the built in option
I would second this. When I upgraded to the s9 plus everything got slow.... Any solutions?
van131 said:
I would second this. When I upgraded to the s9 plus everything got slow.... Any solutions?
Click to expand...
Click to collapse
So far I haven't had any success. With limited testing the hotspot would sometimes be faster for downloading games on Steam, but it's not too reliable for in-game
I got this from the company:
> 1. Uninstall PdaNet+ from your phone
> 2. Open the we browser on the phone and go to http://pdanet.co/install
> tap on the link to the apk file to download and install it.
> 3. Open PdaNet on the phone and tap the "3 dot" menu icon, select "IPv6
> support" from the menu, then select "IPv6 prioritized".
> 4. Enable USB mode and connect PdaNet.
Thank you, I'll try this as soon as I get the chance and report back
Ended up getting faster download speeds when using IPv6, though still had trouble connecting to servers. Think I figured out the problem when playing Torchlight II and it brought up I had a strict NAT. Not sure how to change it for mobile tethering but I'll keep looking