[Q] No Vibrate on Darky's 7.8 - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello xda, I've flashed my i9000 to Darky's 7.8 Gingerbread ROM but am having a problem with the vibrate notification.
I've tried the following settings:
-Silent Mode Enabled
-Vibrate set to ALWAYS / Vibrate set to SILENT MODE ONLY
-Silent Mode Disabled
-Vibrate set to ALWAYS
This never happened with 7.7 ROM, but only with 7.8. Has anyone else had this issue, is there a setting I'm overlooking?
Cheers

Already tried to clear the cache ¿?
I FLASHED IT TODAY (NO WIPE VERSION) from jpx and everything works fine till I tried to change the lockscreen (com.android.settings error).
Maybe Got a solution?
Sent from my GT-I9000 using XDA App

Wouldn't this be better in the Dev section. Specifically on Darly's thread ?

According to Darky's thread:
Changelog - v7.8
Replaced the Gallery for a much better battery life [Setting a Lockscreen Wallpaper won't work with this Gallery, so stop complaining]
Hope this problem would be resolved in 7.9 .

Related

CM 7 - hello hello bug -- any fix?

Hello Everybody,
I am having an incoming call issue even with JVT modem.
The fact is: intermitently the caller doesn't hear hear me when I pick up a call.
Workaround used: hold/unhold the caller and then I hear perfectly well.
Has anybody found a fix for this? (I am already on JVT modem).
Thanks in advance,
Same Problem ...Waiting for the right solution
Hi ,
I am facing the same problem on my i9000....with CM7 ...MIUI....or ICS build (CM9) ,tried and tested different modem's but no success....I hope there is someone to help us out ...
First thing is when this happens try to hold and unhold the call.
If you use custom kernel download voodoo control app and in recording presets set it to original.
That is the workaround.
Hi Malcho..
Thanks for your suggestion , i have tried setting preset to ORIGINAL in voodoo control app when i was in ICS by Teamhacksung ....but that didnt work out too ...
same problem i am facing in MIUI and cyanogenmod
me too
up up!
same here...fugu mod kernel + voodoo control app recording preset to original = same issue.
Did I miss anything?
Same problem for OneCosmic Rom
I was facing the same problem in Build 9 of teamhacksung.. went back to CM7 and everything was fine again.. then tried Onecosmic's ICS and now MIUI.. no such problems.. so that was in CM9 only I guess and maybe it's been resolved in the later builds don't know..
See comment 31
code.google.com/p/cyanogenmod/issues/detail?id=4681
Edit: Reply if this works for you + what rom and kernel you are using
"hit THANKS if i helped you"
hello,
Thanks a lot for that.
I will test it next week and let u know the result. (Have installed ICS for the moment).
Had this a while back, all i had to do was move the phone away from my ear so the screen will light up and its back to normal
Tried everything..
Flashed hhb_test2.zip , different modems , voodoo control app.... Nothing works till now..
Its fine only on stock rom..
Any comments guys?

[Q] Lock Screen Issue

Hi everybody. So recently I have been having an issue with my lockscreen. I was playing around with some ICS roms in order to see what I liked and I had tested out SlimICS and Dark Knight. I had originally been running NIGHTLY builds and had reverted to them again after my searching. However now my lockscreen keeps changing into a different lockscreen. I had it on the default one and then it would go into a different lockscreen that would tell me to slide down to unlock with a new wallpaper and everything. I have tried to reflash the rom as well as wiping the data on my phone but still no luck in stopping this. Any suggestions? Thanks in advance!
rliu307 said:
Hi everybody. So recently I have been having an issue with my lockscreen. I was playing around with some ICS roms in order to see what I liked and I had tested out SlimICS and Dark Knight. I had originally been running NIGHTLY builds and had reverted to them again after my searching. However now my lockscreen keeps changing into a different lockscreen. I had it on the default one and then it would go into a different lockscreen that would tell me to slide down to unlock with a new wallpaper and everything. I have tried to reflash the rom as well as wiping the data on my phone but still no luck in stopping this. Any suggestions? Thanks in advance!
Click to expand...
Click to collapse
I replied to you in the CM9 thread, take a screenshot.

[Q] Home button no function

After i flash [ROM] RocketROM v1 - JB - 4.1.1- XXLS2 [Update 10/26] FAST/STABLE
then my home screen no function and no lock screen function.
How to solve this problem? thanks you
Same Problem here
Even i am facing the same problem with the Home Button. Also there are no settings i found for Notification messages. Whenever i get an SMS or a Whatsapp message i dont get a notification. Can someone please suggest whats the issue here.
i dont no what happens after 14 hours my homebutton is now working
Sent from my GT-N7000 using xda premium
I'll wait 14hrs too n_n
_______________
Sent from GT-N7000 via XDA Elite App
Issue Resolved
I went back to RR v12 ICS and reflashed back to RR JB v1 and it seems to work fine now. Home Button & Notifications work fine. :laugh::good: Suggestion: Try a full wipe n flash the rom again and hopefully it should work.
Guys... other issues you facing with Music Player, Polaris or S Note(SMEMO) then please find this thread as there are many fixes that are given there which could help.. :good:
http://forum.xda-developers.com/showthread.php?t=1957152&page=24

[Q&A] Marvel ICS - Highly Customizable ROM

Let us keep the Marvel ROM development thread clean. Where everyone can post here. Even newbies.
So all Q&A will go here.
Other senior members can help answer questions are also welcome here.
Helloo...im using your great rom for few days.Its quite good...but kinda slow for me with stock kernel(i know that i can flash other kernels) Can you add strong accord kernel ?
Thx
Sorry for bad Eng.
Sent from my LG-P970 using xda app-developers app
It is possible that the ROM provides customization options within the system and not at the time of the install mode similar CM10 that are based on?
For example: clock in the center or on the side, various styles of lockscreen, clock + date style, style icons and battery etc..
Another thing would be, you can deploy LED notifications?
Sorry my English.
crystallogenesis said:
Helloo...im using your great rom for few days.Its quite good...but kinda slow for me with stock kernel(i know that i can flash other kernels) Can you add strong accord kernel ?
Thx
Sorry for bad Eng.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Ok I will add strong accord in the install options.
elderap said:
It is possible that the ROM provides customization options within the system and not at the time of the install mode similar CM10 that are based on?
For example: clock in the center or on the side, various styles of lockscreen, clock + date style, style icons and battery etc..
Another thing would be, you can deploy LED notifications?
Sorry my English.
Click to expand...
Click to collapse
Customization options within system requires a lot xml file modifications. This will take some time. For notification, have you tried LG Touch LED Notification app? Its free on play store.
I've got a question about choosing apps, can i add my apps before install/flash rom? i mean, can i add my luncher, keyboard, im using holo luncher and swift key (both are bought) and it will be nice to have only them without others lunchers/keyboard.
AW: [Q&A] Marvel ICS - Highly Customizable ROM
darth2805 said:
I've got a question about choosing apps, can i add my apps before install/flash rom? i mean, can i add my luncher, keyboard, im using holo luncher and swift key (both are bought) and it will be nice to have only them without others lunchers/keyboard.
Click to expand...
Click to collapse
No that works not. Generally speaking you need something first to change it.
Sent from my LG-P970 using xda app-developers app
I just installed this rom since about a week, had some battery drain problems. I switched to the interactive governor and this got a bit better. One big drain is wifi, for this i installed an app which disconnects wifi when screen goes off and on again when i wake my phone. Another problem is that the phone is constantly awake and never goes into deep sleep. Any solution for that?
hi ppl, here is my review, i change to hellmanor kernel. first impression that its running good, i need a lot of battery and when i set to lionheart and cfq. i manage to have a working phone over 24 hrs with low usage, around 8 short calls, about 2 hrs of wifi, no data 2/3g at all, and around 1 hr of gaming. and few minutes ago i put to recharge, battery left b4 charge - 44%
the funny thing is that i notice that my phone start to ring very late while incoming calls, i use vibrate with sound, while a call is incoming, the phone vibrate around 5 sec b4 the sound kicks in, this wasn't happening with stock kernel.
do u think that it might be the governor i chose or maybe I/O ? maybe the low cpu speed when phone in deep sleep?
thanks
sol
Lockscreen
Hi Tantrums,
first thanks for you work.Greate job I have several questions. Is it possible turn off the locksreen rotation? I hate it If i get the sms or miss call, the notification bar show me. But if i turn off this in notification, sms still like unread. I want accept it from notification, not go to the sms or dialer and tap to miss call or sms. Last is GPS. After lock the satelites, gps work normal. But if i want use it for running, walking and others, gps is not realy correct. Sport tracker show me bad way, distance and speed. I guess gps use only few satellites. Do you can change this for next version? Please! Because you ROM is awesome.
Thanks you.
I wonder how I install CWM recovery without flashing the regular v20s via SFT? I tried not to install this custom CMW ('ve had problems with it to restore roms at other times) but could not.
I await your help.
Hello!
I have not been able to sort out the issue of date & time sync with my network provider, I have to do it manually & I have to go through all the pain every time I reboot my phone.
Also, is there any app to control the extensive battery drain?
chintan.bhaidani said:
Hello!
I have not been able to sort out the issue of date & time sync with my network provider, I have to do it manually & I have to go through all the pain every time I reboot my phone.
Also, is there any app to control the extensive battery drain?
Click to expand...
Click to collapse
from the Play Store, download and install "No-frills CPU Control". Open the program and set the governor to either "performance" or "interactive". Set the scheduler to "cfq". That should help with the battery. (it should actually double it).
Not sure about the time sync. Someone else was manually having to do it too.
Have you performed a factory reset via settings or the hidden menu?
chintan.bhaidani said:
Hello!
I have not been able to sort out the issue of date & time sync with my network provider, I have to do it manually & I have to go through all the pain every time I reboot my phone.
Also, is there any app to control the extensive battery drain?
Click to expand...
Click to collapse
Did you flash v30 baseband? Coz for me it solved the problem with auto time/date sync.
sent from my smart toaster
AW: [Q&A] Marvel ICS - Highly Customizable ROM
I had the problem with wrong time sync a lot with CM10 as I used a v20 baseband. After upgrading to v30 baseband I only had it with one CM10.1 ROM.
Sent from my LG-P970 using xda app-developers app
is there any difference if its Unknown baseband or flashing a baseband?
marckjao said:
is there any difference if its Unknown baseband or flashing a baseband?
Click to expand...
Click to collapse
I used the base band from Huexxx when I updated from GB to ICS:
http://huexxxtuff.blogspot.com.es/2013/01/izs-rom-links.html
You should be able to change the base band even after you install a ROM image.
Hi, I'd like to try this ROM but I just have a few quick questions as I couldn't find a clear answer reading through all the posts in this thread and the dev. thread...
Is flashing the baseband absolutely essential to run this ROM? I currently have V20j as I'm in Canada on the Koodo (Telus) provider. I noticed the basebands (versions V30x) are for Europe and Germany etc. Would this not cause an issue as I'm in Canada? Would the language still be in English?
Also there are several baseband versions, I'm not sure which one I should use. Can anyone help me understand which one I should use (if any)?
Does this ROM contain it's one gapps version as well as it's own Kernel? (I'm currently using kernel 3.0.8)
I'm currently running Mackay 2.7.6 (JB 4.2.2) so I'm assuming just a factory/data wipe, wipe dalvik cache, wipe cache, and install the zips from SD, correct?
Can someone confirm the bluetooth works with this ROM (audio works) as well as camera works completely?
Thanks in advance.
I will try with the v30 baseband.
MEC-777 said:
Hi, I'd like to try this ROM but I just have a few quick questions as I couldn't find a clear answer reading through all the posts in this thread and the dev. thread...
Is flashing the baseband absolutely essential to run this ROM? I currently have V20j as I'm in Canada on the Koodo (Telus) provider. I noticed the basebands (versions V30x) are for Europe and Germany etc. Would this not cause an issue as I'm in Canada? Would the language still be in English?
Click to expand...
Click to collapse
No it's not essential. I don't know if it's better to stay with your baseband or flash the european open. I would first stay with the one you have and than after a few days try the v30 one, if v30 works well it's probably better. You know that some contries in europe speek English too? (Like England.)
Does this ROM contain it's one gapps version as well as it's own Kernel? (I'm currently using kernel 3.0.8)
I'm currently running Mackay 2.7.6 (JB 4.2.2)
Click to expand...
Click to collapse
Your getting something complettly wrong here, this is not CM9 based it's based on the oficiall LG v30b, so Gapps are not needed (you could say there already included, but it's more like there not removed). Marvel11 comes with aroma installer and includs 3 different kernels. Mackay is CM10.1 based, so everything is different, the kernel for sure.
Can someone confirm the bluetooth works with this ROM (audio works) as well as camera works completely?
Click to expand...
Click to collapse
Camera works, GPS didn't for me (europe) but it might for you, bluetooth I hardly ever use so I can't garantie but it works on other v30 based ROMs so I don't see why not. (As said it's not CM9 based.)
Don't make a fuss just try it, it should work. If it doesn't you probably made something wrong, than come back explain what you did and probably a few ppl can help you.
do we need to flash v30 baseband separately? doesn't it gets flashed along with the ROM?

[Q] Small problem with Auto Rotate

Hi guys!
Recently i flashed my SGS with 4.2.1 jb and actually right now i can see the auto rotation doesn't work. My previous android version was 2.3.4 DarkyROM and there was working but now it doesn't work,i was thinking about my accelerometer is gone but no is not,i tryied with some apps from store to check if is broken but its working.Only if i download an app and press LANDSCAPE mode its rotate but automatic doesn't work,what problem could be? Thx and sorry for my bad english!

Categories

Resources