charging + mem card problem - XPERIA X1 Q&A, Help & Troubleshooting

i already have x1 when it is released, now i moved to htc hd7, i read a thread regarding to how to create a gold card, so i was trying to generate the sd cid using my x1. the proplems are:
1- i am unable to charge the phone when the sd card connected.
2- i am unable to sync with my pc either with sd or without.
3- i am unable to format the sd using resco i got a message that the sd might be protected while it is not.
4- i am unable to hard spl my device and it is stuck in 0% and i get error 262
5- i try different generic rom's with no luck.
for ur info i use 2 different sd cards while it is working fine when it is connected to my pc. Also, i try 3 different pc's.
any solution will be appreciated.
: (
regards,
Saud

saud__19 said:
i already have x1 when it is released, now i moved to htc hd7, i read a thread regarding to how to create a gold card, so i was trying to generate the sd cid using my x1. the proplems are:
1- i am unable to charge the phone when the sd card connected.
2- i am unable to sync with my pc either with sd or without.
3- i am unable to format the sd using resco i got a message that the sd might be protected while it is not.
4- i am unable to hard spl my device and it is stuck in 0% and i get error 262
5- i try different generic rom's with no luck.
for ur info i use 2 different sd cards while it is working fine when it is connected to my pc. Also, i try 3 different pc's.
any solution will be appreciated.
: (
regards,
Saud
Click to expand...
Click to collapse
Your problem seems really same on Russell's problem but Russell's problem is caused that his phone was broken due to falling down (hardware problem).

^^^
thanks bro. it is really strange no sync no charging while sd card is inserted, changing generic roms with no luck, unable to hard spl. i am totally confused.

Related

Major SD Card problem..

ok ive had my 256mb, 512mb and 1gig sd card working fine on my BA until recently..now im running into the following problems:
1. all the cards are recognised on the BA, but i'm prompted with this "Do you want to format this storage card to make it readable". Following the successful format, neither system nor applications like Resco or SKTools see the Storage Card.
2. I've formatted using both Fat16 and Fat32 on pc but again when inserting the cards into the BA i get the same "Do you want to format this storage card to make it readable". After formatting, the same result as no.1.
3. Ive read that un-checking "Enable advanced network functionality" would help. Have tried this and soft-reset with the same problem.
4. After formatting a card in the BA and then sticking it into the card reader on my desktop...the pc doesnt recognise it and prompts to format it. So this keeps going round and round with both pc and BA prompting to format before use. However the pc recognises the cards after formatting them.
5. After the BA formats any of these cards..I soft reset..but then it prompts to format again after the soft-reset.
6. Tried using StorageTools but it never recognises any of the cards when inserted..even after the BA has recognised it and apparently successfully formatted it.
7. Finally tried a hard-reset and restored my backup but still none of the SD cards are recognised.
Now it seems maybe a system problem or possibly a hardware fault..but the cards do initially get recognised when inserted into the BA but its after the BA formats it that nothing appears.
Have had a search in these forums...tried chkdsk on all cards without errors..but I'm still stuck..hope someone out there can help. Thanks in advance.
definately some hardware problem in BA.
i have a broken WIFI chip.
welcome to the club.
SD Card Problem - QTEK9090
I have the same problem with my 2Gb Storage card. I have updated my QTEK9090 to WM6.0 and after the update my storage has the same problem.
Im trying to find some patch or upgrade to this problem.
Try this
After some times, ived already had such problems like yours, and i think ived already fix it, ahm try to install wm5storage on your device,then activate it,, then connect to the PC, IT will,promt as removable disc,, just format the SDcard, then try to restart it,, im n0t sure if it would work on You BA coz ive done it on My HIMALAYA, but again its worth of trying,,
bukwit said:
ok ive had my 256mb, 512mb and 1gig sd card working fine on my BA until recently..now im running into the following problems:
1. all the cards are recognised on the BA, but i'm prompted with this "Do you want to format this storage card to make it readable". Following the successful format, neither system nor applications like Resco or SKTools see the Storage Card.
2. I've formatted using both Fat16 and Fat32 on pc but again when inserting the cards into the BA i get the same "Do you want to format this storage card to make it readable". After formatting, the same result as no.1.
3. Ive read that un-checking "Enable advanced network functionality" would help. Have tried this and soft-reset with the same problem.
4. After formatting a card in the BA and then sticking it into the card reader on my desktop...the pc doesnt recognise it and prompts to format it. So this keeps going round and round with both pc and BA prompting to format before use. However the pc recognises the cards after formatting them.
5. After the BA formats any of these cards..I soft reset..but then it prompts to format again after the soft-reset.
6. Tried using StorageTools but it never recognises any of the cards when inserted..even after the BA has recognised it and apparently successfully formatted it.
7. Finally tried a hard-reset and restored my backup but still none of the SD cards are recognised.
Now it seems maybe a system problem or possibly a hardware fault..but the cards do initially get recognised when inserted into the BA but its after the BA formats it that nothing appears.
Have had a search in these forums...tried chkdsk on all cards without errors..but I'm still stuck..hope someone out there can help. Thanks in advance.
Click to expand...
Click to collapse
Well, you've already tried different STORAGE CARDS and same thing happens right? You've already tried reformatting it using your PC and also with your BA and same thing happens right? You did a hard reset and samething...definitely a hardware problem. But before this, what happened? Before your BA stops reading your storage cards, what happened?

Storage Card not showing up

Hi guys
Had problems yesterday with my Storage Card being renamed to Storage Card2 etc and could not figure out what was up. Renamed it back as described in various places (By deleting the Storage Card folder created and resetting).
Today however the Storage Card is not showing up at all. Have tried the following:
- Remove storage card, copy contents onto PC using card reader and formatting. Copy contents back and put in phone. -> No luck.
- Hard reset. -> No luck.
Never had any other roms than the standard. Have not upgraded to 6.1 yet.
Could the contents stop it from showing up?
Cheers
Louis
One thing i could think of is a corrupt file.
Try formatting it again (with all your files backed up in your PC) and just insert the card with nothing on it. If it shows up and your phone reads it, a good bet that one or more of your files from your backup is corrupt and the phone is unable to read the card.
yes i suppose that is a logical step to do. lets hope it is. but luckily it is still under warranty if it is hardware...
Reformated the card (FAT32 is this right?) and loaded into HTC TyTN II without restoring files onto it (i.e. completely blank).
Still not showing up...
Any ideas?
ur storage card reader might have become faulty. i would recommend a warranty exchange for ur device.
Installing WM6.1 sorted this out...
I have the exact same problem as you had.. But I already have WM 6.1 and the storage card still doesn't show up..
Tried formating, etc and still nothing.. I can see all the contents if i use a card reader on my PC, but once I insert de card on my kaiser it doesn't show up..
Any ideas?
Have you hard reset? It didn't help me until I installed the WM6.1. Otherwise is it still under warranty. I was actually on the way to take mine in when I installed 6.1. Actually I should have taken it in as I have a scratch on my screen and I suspect they would have replaced the phone...
This problem usually happens if you are using a third party file explorer like Resco etc. and make non visible areas such as your ROM visible.
It then treats the new area as Storage card and the SD card becomes Storage card2.
Just check if you have any other memory areas set as viewable and undo this.
My storage card completely disapeared but came back when I installed WM6.1. Didn't use 3rd party explorers etc. But this might be Baretto's problem.
This problem also occurs when running Card Export II. The Storage Card is renamed as Storage Card2. The only solution is to remove the card and re-insert it.
This solved the problem for me.
Regards,
MAC
The problem I originally described here was the Storage Card disappearing completely. Not renamed etc. I.e. there is no Storage Card2. Baretto may have a similar problem to mine or his may also just be renamed.
Yes, I have the exact same prob as lrossouw did. My mem card wasn't renamed. It just disapeared..
I've already did hard-reset, and I don't use any third party explorer.. I already formated the card.
My only hope is to flash another rom.
I'm using the official HTC 6.1 portuguese rom and i'de like to stick with this rom..
If I was the only one with this problem, I would think it would be a hardware prob, but lrossouw solved his prob by flashing another ROM, so I'm hoping there will be another solution..
EDIT: Just tried to flash another ROM and still no success.. Still Can't find my mem card
I got one better for you. I had to wind up formatting mine because of this. Here's the deal. I go to open up my storage card and the folder is there but none of my files are showing. Then I go to the memory to check the space available and it was still showing that I had half of the card full. So I popped out the card and plugged it into my computer with the same results, nothing. So then I soft reset twice, nothing. I pim backed up my phone and hard reset, nothing. The pim back up was on my card but nothing else. Then I made another my documents folder and for a split second it showed the files that use to be in the old my documents. So seeing that all was lost I formatted my card and I haven't had any problems yet. I started a thread about this but no one responded so I assumed no one else had this problem.
P.S. I have an 8gig sdhc card
cragordon said:
I started a thread about this but no one responded so I assumed no one else had this problem.
Click to expand...
Click to collapse
No one has answered you, because there are already other threads about that problem.. Search and you will find them..
This thread is not about empty mem cards.. It's about the device not recognizing the card, so pls refer to other threads..
Thanks
Baretto is it possible to reflash it with the wm6.1 rom? It might fix it.
lrossouw said:
Hi guys
Had problems yesterday with my Storage Card being renamed to Storage Card2 etc and could not figure out what was up. Renamed it back as described in various places (By deleting the Storage Card folder created and resetting).
Today however the Storage Card is not showing up at all. Have tried the following:
- Remove storage card, copy contents onto PC using card reader and formatting. Copy contents back and put in phone. -> No luck.
- Hard reset. -> No luck.
Never had any other roms than the standard. Have not upgraded to 6.1 yet.
Could the contents stop it from showing up?
Cheers
Louis
Click to expand...
Click to collapse
LOL,
Guy this is the easiest fix ever.
All you do is delete the folder that says "Storage Card" then remove & reinsert the SD card. SD 2 will disappear & be corrected upon reinsertion.
This issue happens because of the Unload delay & sometimes because of SD Power management issues.
Always best to make sure SD Card Power Management is DISABLED.
GSLEON3 said:
LOL,
Guy this is the easiest fix ever.
All you do is delete the folder that says "Storage Card" then remove & reinsert the SD card. SD 2 will disappear & be corrected upon reinsertion.
This issue happens because of the Unload delay & sometimes because of SD Power management issues.
Always best to make sure SD Card Power Management is DISABLED.
Click to expand...
Click to collapse
As I & Baretto posted before (read the bit you quoted) there is no *spoon* (edit:storage card folder). It is not there. Can't delete it if it is not there. There is no Storage Card 1,2 or any number either. The storage card is not showing up anywhere and not as SD2 either.
Mine was fixed by upgrading to wm6.1. Baretto is on wm6.1 already.
@ lrossouw
I already tried to reflash it with HTC original 6.1 rom and other 6.1 cooked roms and nothing..
I'm getting desperate..
I'm thinking about sending it to the warranty, but I'm predicting 1 or 2 months without my Kaiser if I do so
@ GSLEON3
What do you mean by "SD Power management issues"? As lrossouw said, I don't have the SD card rename problem, but maybe my Kaiser ins't recognizing the SD card because of something related with power mangement..
It might be power related. My phone was on very very low battery power just before this happened for me. In fact had to reset itself a couple of time due to low battery. The next day the storage card was gone.
Anythign similar for you Baretto?

Flashing from sd card Problem

Hallo,
i cooked many ROMs and every time i try to flash using SD Card (8GB), but without any sucess, it does not find any ROM to flash!
I renamed the cooked ROM to blacimg.nbh (also tried blackimg.nbh), copy to SD Card, Rebo0t into Bootloader mode (Power + Volume Down), it reboots and search for ROM then change to serial (usb)
I used search but no answer found
What am i doing wrong?
Thnax in Advance
WBR
Siemens Lover
SiemensLover said:
Hallo,
i cooked many ROMs and every time i try to flash using SD Card (8GB), but without any sucess, it does not find any ROM to flash!
I renamed the cooked ROM to blacimg.nbh (also tried blackimg.nbh), copy to SD Card, Rebo0t into Bootloader mode (Power + Volume Down), it reboots and search for ROM then change to serial (usb)
I used search but no answer found
What am i doing wrong?
Thnax in Advance
WBR
Siemens Lover
Click to expand...
Click to collapse
Which file did you rename to blacimg.nbh (that's correct and not blackimg.nbh)? Did you save it to the root of the sd card as suggested (although mine is in a folder and this also works)? Because the steps you are describing are correct and should work (work like that for me). The only thing I can think is that there is possibly something wrong with the file you are using. Is it one of your own cooked roms?
ClydeB1 said:
Which file did you rename to blacimg.nbh (that's correct and not blackimg.nbh)? Did you save it to the root of the sd card as suggested (although mine is in a folder and this also works)? Because the steps you are describing are correct and should work (work like that for me). The only thing I can think is that there is possibly something wrong with the file you are using. Is it one of your own cooked roms?
Click to expand...
Click to collapse
Thanx for ur reply
Yes, i cook my own clean ROMs, the ruu_signned.nbh is renamed to blacimg.nbh and is directly copyed to the root of my SD Card
I do not know what is wrong!
WBR
Siemens Lover
faced the same prob long time ago with a old 4 Gb card...no matter what i've did was not able to flash. However I sugest to reformat your sd card (FAT 32 and not on your pc/laptop, do it with your phone) and then try again after formating, altough it may not help. to be sure that you are not doing wrong try another SD card if possible.
Another option to check your self is flashing with ActiveSync after formating.
Good Luck
p.s. It seems this is happening often if you used your SD card in another device
I'd a similar problem while flashing on my old P3300
To avoid the problem, I'm using a 1gb micro sd dedicate only to rom flashing but with a single partition of 256MB.
dunno if this could help u
cheers
I was having exactly same problem today when I tried to flash - mine's 8gb mini SD which came as a part of package from Orange, U.K.. I ended up using normal USB cable but I was wondering why it didn't work...
zephyr said:
I was having exactly same problem today when I tried to flash - mine's 8gb mini SD which came as a part of package from Orange, U.K.. I ended up using normal USB cable but I was wondering why it didn't work...
Click to expand...
Click to collapse
Fashing with some big SD >4gb could generate some issue. Use one small dedicated to that and format it first in Fat32.
Hi Carl, thanks for your advice - it actually worked like a charm. I didn't really thing 8gb would cause this problem. I used just a plain 2gb ScanDisk card, formatted in Fat 32 and put only blacimg.nbh following normal procedures - thank you very much again!
My 2 cents
I had a similar problem not long ago with my 8Gb Micro SD that came with the card. I'd re-formatted it via the PC and altered the default settings based on a thread I read on here which was supposed to speed up access to the card. If I remember correctly it was changing the default allocation size.
Long story short, reformatted back to default settings and I was able to flash again from SD. IMO it's moreso the format of the card, not so much it's size as I never had a problem with flashing from card before tweaking it's format settings.
SD Card
I always flash from my SD card.
My latest card is a 16Gb class4 SanDisk, and I must have flashed more than 50 times from this. I always put my blacimg.nbh file in the root of the card.
Size of the card is not important, it just have to be formated in FAT32.
There are several reports that some brands of card do not work very well with Windows Mobile.
One time I purchased a Kingston card that simply would not work.

micro SD smaller than before- ??

hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
bump bump bump
cor848 said:
hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
Click to expand...
Click to collapse
keep the card in your phone and connect to pc with usb cable in card reader mode.
Format card.
If still dont work you got a fake/pirate micro sd
How did you format it ?
On the official SD Association web site http://www.sdcard.org/consumers/formatter/ there is the following statement:
"SD or SDHC memory card file systems formatted with generic operating system formatting software do not comply with official SD memory card requirements and optimum performance may not be experienced."
The site also provide an SD card formatter program, fully compliant with SD Association specifications, but, unfortunately for you, it runs only on PC, so you need a card reader.
I had the same problem some time ago, with a 2GB full size SD formatted with my iPaq and recognized as 1GB, this tool fixed it.
If you connect your device to PC as a card reader, as stated above, it should work.
Go to Settings / Connections / USB to PC and choose Disk Drive. At least, my Xperia, and many HTC have this control panel.
cor848 said:
hi guys I got weird problem- my micro SD card is, or should I rather say was, 4GB. after some ROM installing I observed that its not a 4gb anymore, but 2gb. and its not about collecting trash, its just maximal capacity. Can some1 tell me what to do?
1. I dont have memory card reader in PC so dont ask me do to that okay?
2. should I do sth before installing new rom? of course HardSPL is done. But between installing 2 different roms? I used to copy the installation file Kovsimg.nbh on card and did standard prodecure- switch off the phone etc but I guess its a mistake isnt it?
thanks in advance
Click to expand...
Click to collapse
chinese fake
you are a chinese fake, formatted with device that one of u recommended me and working
thx

Problem Downgrading HD7 Tmobile US

Hi, i am stuck with this phone on WP7.1, the matter is that i need to change the ROM because T-Mobile ROM does not have this language.
I have read the tutorials how to downgrade the SPL and ROM form asnar and by goldcard method, but none of them are working, i have made everything as the tutorial say here in forum but i can not downgrade this device.
Every time i try by goldcard method after booting into usb host mode(volume down + camera + power) i get the screen loading...
After this the phone goes it a reboot loop and keeps showing usb host mode, then loading... screen and then reboot again
This are the details of my HD7:
OS : 7.10.8107.79
FW : 2250.21.51202.531
Radio : 5.71.09.02a_22.51.50.21U
Bootloader : 5.12.2250.0 (135916)
I have tried to flash with this files :
RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_by_ansar
RUU_Schubert_TMOUS_1.18.531.01_Radio_5.51.09.11a_22.31.50.09_Signed_SCHUBERT_RELEASE
RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_22.45.50.21_Signed_SCHUBERT_RELEASE
RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE
But i keep on the reboot loop
Hope you can help me to solve this matter
Thanks in advance
Br,
Tito Millo
When the device goes to "Loading" and then gets stuck in a boot loop, that means that is started to read the file but then failed.
The most common cause of this are -
1. The SD card reader. Try a different card reader. Make sure that it's not a multi card reader as these seem to have the most problems.
I tried 3 different card readers before my flash/downgrade was successful and have heard of others trying 5 or more different card readers before it worked.
2. If the SD card reader uses a USB cable (like a standard PC printer USB cable) try a different USB cable to connect from the SD card reader to the Y cable.
3. Try switching around the connections on the Y cable between the SD card reader and the phone.
4. Sometimes the camera button will get stuck pushed in when entering USB host mode and prevent the device from flashing.
Try the above and see if it will work for you... I'm pretty sure it's the SD card reader though.
Since it's a T-Mobile device I would also recommend using a T-Mobile Pre-NoDo/NoDo rom to avoid any errors and if you need to return to stock for any reason you have it.
This is a good rom to use, I used it to downgrade my device and the 5.65 radio that is included with it, seems to have better reception and battery life..at least for my device.
RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_2 2.45.50.21_Signed_SCHUBERT_RELEASE
Don't forget to use a 1GB sdcard because 2GB gives some problems with the goldcard method...
I have a TMobile like yours and the goldcard made it possible.
xdrc45 said:
When the device goes to "Loading" and then gets stuck in a boot loop, that means that is started to read the file but then failed.
The most common cause of this are -
1. The SD card reader. Try a different card reader. Make sure that it's not a multi card reader as these seem to have the most problems.
I tried 3 different card readers before my flash/downgrade was successful and have heard of others trying 5 or more different card readers before it worked.
2. If the SD card reader uses a USB cable (like a standard PC printer USB cable) try a different USB cable to connect from the SD card reader to the Y cable.
3. Try switching around the connections on the Y cable between the SD card reader and the phone.
4. Sometimes the camera button will get stuck pushed in when entering USB host mode and prevent the device from flashing.
Try the above and see if it will work for you... I'm pretty sure it's the SD card reader though.
Since it's a T-Mobile device I would also recommend using a T-Mobile Pre-NoDo/NoDo rom to avoid any errors and if you need to return to stock for any reason you have it.
This is a good rom to use, I used it to downgrade my device and the 5.65 radio that is included with it, seems to have better reception and battery life..at least for my device.
RUU_Schubert_TMOUS_3.01.531.02_Radio_5.65.09.25a_2 2.45.50.21_Signed_SCHUBERT_RELEASE
Click to expand...
Click to collapse
Thanks for your kindly help, i was trying with 5 card readers and none worked finally went to a store and got a new one, and a SD 1GB, made the gold card and downloaded the NoDo ROM, and with this SD card and SD card reader i have been able to downgrade the device, now i am happy i can install any rom on my device
Thanks a lot for your kindly help all was about the SD reader and SD card
Br,
Tito Millo
Hell YEAH!!!
tito millo said:
Thanks for your kindly help, i was trying with 5 card readers and none worked finally went to a store and got a new one, and a SD 1GB, made the gold card and downloaded the NoDo ROM, and with this SD card and SD card reader i have been able to downgrade the device, now i am happy i can install any rom on my device
Thanks a lot for your kindly help all was about the SD reader and SD card
Br,
Tito Millo
Click to expand...
Click to collapse
Goldcard + 1GB all the way!!!!
I recommend you Deepshining, I'm sending you the link.

Categories

Resources