[Q] HELP - Tilt, TyTN II, MDA Vario III General

hey, im trying to figure out how to put wm6.5 on my htc 8925 at&t tilt. I dont want to mess up and need to be sure I got the whole process understood and proper files downloaded. can ANTONE help??

gearheadbobby said:
hey, im trying to figure out how to put wm6.5 on my htc 8925 at&t tilt. I dont want to mess up and need to be sure I got the whole process understood and proper files downloaded. can ANTONE help??
Click to expand...
Click to collapse
you should try to find it at http://forum.xda-developers.com/showthread.php?t=533617
I think there was already a tutorial, but if not there you can find it on Wiki

Hakim Rahman said:
you should try to find it at http://forum.xda-developers.com/showthread.php?t=533617
I think there was already a tutorial, but if not there you can find it on Wiki
Click to expand...
Click to collapse
ya I found the instructions and read them over good. it seems simple but when i installed the files it said, Kaiser hard spl, and went thru the process i ended up with nothing. my phone is the same as it was with wm6.1 . only thing changed is radio. what should i do to get the 6.5 rom installed?

gearheadbobby said:
ya I found the instructions and read them over good. it seems simple but when i installed the files it said, Kaiser hard spl, and went thru the process i ended up with nothing. my phone is the same as it was with wm6.1 . only thing changed is radio. what should i do to get the 6.5 rom installed?
Click to expand...
Click to collapse
You need to hardspl your device before you flash to a ny rom (in this case 6.5). Hardspl and rom flashing are different processes.
Please take your time to read. This thread will be closed.

Related

Can't upgrade to cooked ROM

hello guys...i've been trying to upgrade to this Romeo's rom....but seems there's a problem with it...after i copy n run the jump spl, the screen become tri color...n i waited for the "usb" words to appear in the middle of the screen,but it didn't appear....and because of this i've been stuck at these steps for few days...i hav searched at the wiki's, but couldnt find about this probl..help pls guys...thanks in advvnce,,
okay..think i find the way now..searchd again at the wiki...n the suggestion was to reflash the original rom...think this is my original rom "1.81.707.0 (radio 1.27.12.11) Dopod WWE "...the question is...the rom version and the radio version is different here....the rom vers is exactly the same wit my rom...but the radio is different....should i just proceed or not?
What version of JumpSPL are you using? Mine, and a couple of other's as well, didn't show the "USB" with version 1.93. Try version 1.56 and it should work.
Please tell me that you are not trying to flash a ROM using JumpSPL...
i've been told to use this "JumpSPL1.93-KAIS" in order to use the "@ROMEOS_v3_5"...i just follow the steps given to me...
Connect Kaiser to computer using USB cable
Make sure ActiveSync icon is GREEN
RUN kaiser-HardSPL.exe on Computer (PC)
Follow instructions on screen:
Click to expand...
Click to collapse
Wonder if someone told him to cid-unlock first..
The wiki/sticky would have.
ChumleyEX said:
Wonder if someone told him to cid-unlock first..
The wiki/sticky would have.
Click to expand...
Click to collapse
That's why I went with an open-ended statement/question. His original post states he checked the Wiki, but I saw no mention of HardSPL.
NotATreoFan said:
That's why I went with an open-ended statement/question. His original post states he checked the Wiki, but I saw no mention of HardSPL.
Click to expand...
Click to collapse
i checked wiki because the instruction given to me went wrong...i downloaded this romeo v3.5 and comes together with jumpspl and hardspl as well...the instruction ask me run the jumpspl before running evrything else....so here,u guys saying that i should straight away run the hard spl is it?
giggsy_lel said:
i checked wiki because the instruction given to me went wrong...i downloaded this romeo v3.5 and comes together with jumpspl and hardspl as well...the instruction ask me run the jumpspl before running evrything else....so here,u guys saying that i should straight away run the hard spl is it?
Click to expand...
Click to collapse
JumpSPL
HardSPL
ROMeOS
in that order...
Ok, so I know I have posted this before....and have seen it posted in about 100 other places ( not to mention the ROM UPGRADING thread right on the front page of the WIKI ). JUMPSPL is ONLY used to flash your current locked spl into a HARDSPL.
Step 1
Run JumpSPL on the phone
Step 2
Flash HARDSPL onto the phone
Step 3
Using HARDSPL, Flash your ROM and/or RADIO
NEVER NEVER NEVER DEVIATE FROM THIS!!!!!
pyraxiate said:
Ok, so I know I have posted this before....and have seen it posted in about 100 other places ( not to mention the ROM UPGRADING thread right on the front page of the WIKI ). JUMPSPL is ONLY used to flash your current locked spl into a HARDSPL.
Step 1
Run JumpSPL on the phone
Step 2
Flash HARDSPL onto the phone
Step 3
Using HARDSPL, Flash your ROM and/or RADIO
NEVER NEVER NEVER DEVIATE FROM THIS!!!!!
Click to expand...
Click to collapse
yeapp...this the order i followed..after i run the jumspl,the tricolor thing appeard...and the sync stopped..and it didn't reconnect,i tried to run the hardspl n follow the steps..but it appears no connection with device...when i checked the wiki about stuck at tricolor...they ask to flash back the shipped rom again..found that rom but in different radio vers with mine....is it ok to just run the original rom again?
giggsy_lel said:
yeapp...this the order i followed..after i run the jumspl,the tricolor thing appeard...and the sync stopped..and it didn't reconnect,i tried to run the hardspl n follow the steps..but it appears no connection with device...when i checked the wiki about stuck at tricolor...they ask to flash back the shipped rom again..found that rom but in different radio vers with mine....is it ok to just run the original rom again?
Click to expand...
Click to collapse
In answer to your Question, Yes.
Read the instructions of Post #2 very carefully of this thread to install Hard SPL: http://forum.xda-developers.com/showthread.php?t=396922.
Then flash the ROM.
Ta
Dave
DaveShaw said:
In answer to your Question, Yes.
Read the instructions of Post #2 very carefully of this thread to install Hard SPL: http://forum.xda-developers.com/showthread.php?t=396922.
Then flash the ROM.
Ta
Dave
Click to expand...
Click to collapse
okayyy bosss....i think this might help...gonna try now..
finallyy...i got it man...thankss alot devshaw...i found that u must take out the sdcard n simcard in order to proceed the steps...now i'm gonna test some roms here...hey devshaw which rom u think best?for me i prefer roms having nice interfaces....seems dutty n L26 are more in interfaces...their design is gorgeus....since this is the first time flashing the rom i don't know which to choose...i've been told to use romeos by hang.tuah,since he's same country from me...i just give it a shot...any recommends??
giggsy_lel said:
finallyy...i got it man...thankss alot devshaw...i found that u must take out the sdcard n simcard in order to proceed the steps...now i'm gonna test some roms here...hey devshaw which rom u think best?for me i prefer roms having nice interfaces....seems dutty n L26 are more in interfaces...their design is gorgeus....since this is the first time flashing the rom i don't know which to choose...i've been told to use romeos by hang.tuah,since he's same country from me...i just give it a shot...any recommends??
Click to expand...
Click to collapse
For a nice UI try the [27-08-08] L26 KaiserDiamond Throttle Launcher (Beta 6 released!). ROMeOS is fast and stable though, best way to find out is to try them.
Ta
Dave

Can't Install any rom on my wing

i try all these rom on this site n i always get errors on my wing n i cant use wm6.1 cuz i have windows xp can anybody help
windows xp has nothing to do with your phone. you just need to flash the rom using uspl just follow the instructions exactly as the site says and you shouldnt have a problem
guntcent said:
i try all these rom on this site n i always get errors on my wing n i cant use wm6.1 cuz i have windows xp can anybody help
Click to expand...
Click to collapse
just go to this link and follow the instructions EXACTLY.
http://forum.xda-developers.com/showthread.php?t=421304
what kind of error?
Hmm... upgrading..... from the beginning
fzzyrn said:
what kind of error?
Click to expand...
Click to collapse
@Fzzm and anyone who has personally upgraded:
So it doesn't matter if you have Vista or not, WM6 or higher still works with XP??
Also, is HTC upgrade good to start?? My phone is unlocked from HTC.
I have everything base original from the box with a few additives (nov 06 hera100) I just move around too much-military
Thanks ahead
answer to your question- no it does not matter
i think i've figured out whats happening.
Unlocked from HTC lets you use any gsm service provider, not install any rom. For that you need a cid-unlocked phone. To this end, we have two tools- USPL and HardSPL. Read the stickies in all the herald forums to get an idea of whats needed.

Please help

Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
USPL and HSPL do this for you so you are able to flash a rom or radio. Read this page from wiki. It'll help you understand
Follow cRaCKwHoRe's guide on how to flash (can be found in my signature). If you intend to do a lot of flashing I'd flash HSPL as its permanent whilst USPL is temporary and you'd need to re-use it before every flash to new rom or radio
Latest HSPL can also be found in my signature
Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.
futurama said:
Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.
Click to expand...
Click to collapse
Flashing from one HTC stock rom to another you don't need to use USPL or HSPL. But going to a cooked rom you do.
Answer to your query is it depends on route you take. If you go down the USPL route you'll need to follow cRaCKwHoRe's guide. Would take to long to explain and he as already done a very good tutorial on the subject. If you go down HSPL route, all you need to do is flash latest HSPL then 1.56 rom
That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.
futurama said:
That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.
Click to expand...
Click to collapse
I'm currently testing Dutty's V3.4. His V3.3 is already released but I'd wait for the new release hopefully in a few days. Both are based on WM6.1. Alternatively their is so many good roms out there. I'd also recommend Davideuck, EnergyROM & L26_THDV2.2 (Laurentius26). All very good roms by very good cooks. Best thing would be to try each of them and make your own opinion
thanks again mate, you are a legend, Ill post tonight to let you know how it went.
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM?
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that
yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.
davemazo said:
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that
Click to expand...
Click to collapse
There are a few forms of unlocking but the bottom line is that you need to bypass the checking which is done in the flash process.
One way is permanat as done once no issues anymore - HSPL
Another is as and when you need - USPL.
Wiki has a walk through that needs to be upated but I thought still was useable.
Flash the new 1.56 shipped rom and then move on to cooked roms. (will help you by pass the greenscreen issue)
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.
futurama said:
yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.
Click to expand...
Click to collapse
Sorry to hijack your thread futurama but I am having the same problem. Could you let me know how you did it
Thanks HDuser. Not sure if you know where I`m up to but originally I flashed my Orange 1.19.61.1 ROM with USPL and then flashed Duttys 2.7 1.56 based ROM which has given me the green screen problem. An earlier poster suggested I flash Olinex HSPL 1.54 to cure the problem. The problem I am having now is the phone refuses to sync with the PC. I have tried Vista and XP, the PC does not hibernate or sleep or anything, the phone is set to not switch off. It will usually sync on first connection but after a few seconds it will disconnect and therefore HSPL is reporting as being disconnected.
I have tried the earlier HSPL and HSPL 1.56 (as the ROM in bootloader screen is reported as being 1.56 and SPL is 1.14). I feel I`m going round in circles and its only a matter of time before I brick the phone.
I have read and re-read the wikis but I am now just getting more and more confused.
davemazo
Look the best way to approach any problem is to go back to the roots.
Flash a stock rom, find your own stock rom and refalsh it, then take it from there.
Your post is missleading and I have no idea were to sart. One issue is your PC ist does not Hibanate, not or go into sleep mode, at the saem time you are saying that you can't sync. Sounds like you have other problems and those other problems are making you have problems with your device.
Thanks HDuser. Sorry for confusing you, but I am now totally confused myself, Basically though the phone does not sync with the PC, I have tried 2 PC`s, with Vista and XP.
But back to your point about flashing stock ROM, I have tried a link in the wiki to download the one I need which is Orange 1.19.61.1 but the link seems to be broken and I don`t know where else I can get it. It doesn`t seem to be on the Orange website or HTC.
HDuser said:
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.
Click to expand...
Click to collapse
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.
futurama said:
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.
Click to expand...
Click to collapse
It sounds as if you have it sorted now and everything working. As HDUser stated previously HSPL & USPL allows you to bypass the CID lock to enable you to flash new roms
Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back
futurama said:
Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back
Click to expand...
Click to collapse
Of course you can. All information you need including original stock radio's, roms etc are available in wiki to download.

Cannot seem to flash blackstone??

Hey all,
I currently have the original ROM Version: 1.19.61.1 WWE and i am trying to update the SPL to a HSPL so that i can use cooked ROMs, can someone tell me why this isnt working? I used the HSPL from the sticky thread on this forum yet it hasn't changed anything......do I have to hard reset my blackstone after doing this? I am getting the error [240]:FILE OPEN telling me to update utility.
Thanks
What type of operation system do you have? Is it vista?
http://wiki.xda-developers.com/index.php?pagename=RUU_Errors - doesnt really apply to HSPL package though for your error code?
I have XP does that make a difference?
sergioiacobucci said:
I have XP does that make a difference?
Click to expand...
Click to collapse
Should make it easier as you don't need to update vista drivers as you're using XP.
Have you followed cRaCKwHoRe's guide to get HSPL or USPL onto your device. Follow link to his guide in my signature.
ERROR [240] - When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again. Check that the contents of the folder is a CustomRUU.exe file and an .nbh file. If you put the os-new.nb file in by mistake instead of the .nbh, this is the error that shows up.
just downloaded again and now im sorted ive got SPL-1.56 OliNex coming up in bootloader mode however my screen is all wierd colours which im hoping will fix once i flash a new ROM, which 6.5 ROM would you suggest? And also do the radio version have match?
Thanks
sergioiacobucci said:
just downloaded again and now im sorted ive got SPL-1.56 OliNex coming up in bootloader mode however my screen is all wierd colours which im hoping will fix once i flash a new ROM, which 6.5 ROM would you suggest? And also do the radio version have match?
Thanks
Click to expand...
Click to collapse
well browse the threads of some roms n u can know the best rom for u..
ya once u fash a 6.5 rom all screen problems will be sorted out.
for radio version, they usually are not included on cooked roms
Ok thanks! Its just im looking at downloading dutty's rom however this has a radio code on it does this matter do you think?
Thanks for all your help
sergioiacobucci said:
Ok thanks! Its just im looking at downloading dutty's rom however this has a radio code on it does this matter do you think?
Thanks for all your help
Click to expand...
Click to collapse
well ya it has the radio n well no probs cos its the 1.14 radio..
all's good..
thanks for all your help much appreciated

restoring a bricked phone

any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Was restoring the stockspl succesfull?
What info do you get in bootloader?
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
pls dont wast threads
hi
a humble request Kindly dont was threads i have created a specific thread for Q& A on Jade why not post it their pls see below link
i see u have wasted 3 thread which could have been used for a much more usefull purpose this is just my humble request to you i hope u will do the neeful thanks
Note : kindly read the first page u would understand why not to waste threads
http://forum.xda-developers.com/showthread.php?t=534581
orange3g said:
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Click to expand...
Click to collapse
"a humble request Kindly dont was threads" read your thread on that, space taken up whether new thread or reply is the same.
orange3g said:
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
Click to expand...
Click to collapse
Am afraid you have a problem, you should have down it the other way around...first stock ROM then stock SPL.....but this is merely a fact then helping you out, i have absolutely no clue how to go from here...sorry!
Maybe someone who can offer some practical assistance will be along soon ......
@Nirak: yes, I misread it. What a silly thing to do. Do you think HTC can help. The phone is in warranty.
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Have you tried to flash your rom through the boot loader mode
try this
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
orange3g said:
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Click to expand...
Click to collapse
Send them a PM, Olipro is not often here, but Cmonex is
haree said:
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
Click to expand...
Click to collapse
Doesn't work because it needs a functioning windows mobile, which I don't have. Mine gets stuck.
thomas01_58 said:
Have you tried to flash your rom through the boot loader mode
Click to expand...
Click to collapse
Yes, nothing happens. The screen is stuck at 0%. I tried using a htc original rom, it got to 1% and said something like not suitable for this device.
I sure this sounds rather silly ,and I am sure you have tried it,have you tried removing the battery and then putting it back again.
Not sure if you tried this already:
Run HardSPL when your phone is in tricolor mode (bootloader?).
Then reflash a stock ROM, also in tricolor mode.
Finally, flash stock SPL.
Hope this helps.
@izzysc: I have tried it (will try again though) in running HardSPL when phone is in tricolor mode. It did not work.
Nirak said:
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
Click to expand...
Click to collapse
I have PMd Cmonex. Thanks.
replied to PM
cmonex said:
replied to PM
Click to expand...
Click to collapse
Tx! had an idea you could help out...

Categories

Resources