[Q] MVNO hero issue - Hero CDMA Q&A, Help & Troubleshooting

I have a Hero which is on an MNVO of sprint. I need the stock HTC (not sprint) rom to have RMA work done. Unfortunately I cannot obtain the stock image now.
I have tried the RUU from HTC but it does not work giving me the invalid ID error.
Can anyone lend a hand?

MVNO? What's that?

Mobile Virtual Network Operator... basically a wholesale user of the sprint network. Are able to brand own devices while being able to use the sprint network...
It appears that the issue with my phone is the "blown" speaker variety. I am going to try blowing air into it to see if it is just dust..
Basically what I need is a stock version of sense UI without the sprint bloatware..

Related

[Q] Dual Nam on Sprint HTC Hero

Hi all,
I was very sure that before i upgraded my HTC Hero, i can see the dual nam menu from the "Setting". But after i upgraded to 2.27 firmware, i no longer have that menu. Does anyone know how to get "dual nam" appear again?
Regards,
Aditya
My guess is you need to run a RUU of the older sprint software. Search around all build RUU's are posted.
i searched around the web for how to downgrade to 1.29, but no luck. the closest i can get is downgrading to 1.5. unfortunately, a website that generates the required mtd0.img was down, so i couldn't downgrade to 1.5. any idea?
Wow. I have no idea what that is. Can you inform me of its function?
what i mean by dual nam function is the ability of a cdma phone to store 2 number within a single phone. it can be from the same or other carrier. you can switch your number without having your phone reconfigured by your carrier. you can easily switch your number from your phone menu.
in US, i almost never consider this function, as cdma carrier in US, AFAIK, prohibit this. but since i'm overseas, i can inject another carrier in the same phone without purging my sprint number.

[Q] HTC ONE UK EE to UK/EU Model

All,
I've been out of the Android loop for some time, I bought a HTC One M7 from T-Mobile UK (EE), it's a non contract/non payg model just the handset, I decided to switch providers and unlocked the phone with no issues.
However T-Mobile have modified the device somehow and locked the APN/MMS settings, I have put new ones in but it defaults to the T-Mobile (EE) settings, as I am using a Virgin sim card it sort of half works as it's on the same network. But I do not get MMS etc.
Also when I dial my voicemail it will no longer allow me to make calls until I remove the sim or reboot the phone which is annoying!
What I would really like to do is turn it in to a non carrier UK/EU device and get OTA updates from HTC.
I have looked and looked at information, but my head is fried, can anyone help me with this, OTA updates are important, I do not want any modified ROMS and I want to revert it to normal if I need to send it in for a repair.
Any advice would be gratefully appreciated.

Straight Talk And Sprint Cluster F HTc One $ S3

So i wanted to do the BYOP with straight talk.. Went to the store got a BYOP Kit $59 and another 1 month $45 Card. Then (after checkin straight talk's MEID check on there site) Checked the MEID of the Samsung S3.. Went thru the activation process and it went thru fine.. Phone Didnt work. It was stock no root ect. Well... I suspected maybe there was a lost/stolen or past due so i called sprint and after 4 attempts and some social engineering that SWIM is not and is proud of was able to determine there is 249 balance and they wont release the phone .. The guy lied to me and said it was deavticated and free and clear. Great.
So yesterday I find a HTC one with a cracked screen but still works.. Great. I run the MEID thru straight talk and Sprint and its good and clear.. Awesome no past due's everything is ok.
Get home tried using the Tmobile Micro Sim and completed the activation process and it goes thru ok! (Dont you love how they make ya feel warm n fuzzy..) I go into the setting on the HTC one and change the mobile data between 4g lte Cdma to gsm and then do the root and sim unlock running viper and get the hidden menu and via *#*#4636#*#* and change the settings to WCDMA GSM ONLY Gsm Auto Prl.. And nothing..
Then spent 2 hours on the phone with Straight talk, got them to cancle out the Tmobile sim and Activated a Att Mirco Sim (They Said it would be better coverage ect) And still Notta.. I got a Htc One 32gb Boot Loader Unlocked (Presumably SIM Unlock) and Rooted and Would really like to get it working on Straigh talk.. I have seen a couple of people on here that have accomplised this But cant get a response from them how they did it.
I really need a working phone cause of the kids, ect. Does anyone have any ideas?
I also have seen how some of these knock off MVNO's say that a past due bal isnt a issue and they can flash a Sprint phone No Issue.. But seems like the S3 wont work unless someone knows of a sure fire place that can do it.
Or getting my HTC ONE to work on a Sprint MVNO but im assuming they will want a UICC# or Sprint 4g Mico Sim card number. And I dont know how to get one of those or who might have them.
Any one have any solutions how i can accomplish getting a working Phone preferably with 4g.. Id even trade these damn things out at this point. I would most likely like to get that HTC One on Sprint thats been unlocked to work with straight talk using its International Capabilities and the ATT Micro Sim that is now active and registered because i have 3 months paid thru them.. Any ideas?
Mortland said:
So i wanted to do the BYOP with straight talk.. Went to the store got a BYOP Kit $59 and another 1 month $45 Card. Then (after checkin straight talk's MEID check on there site) Checked the MEID of the Samsung S3.. Went thru the activation process and it went thru fine.. Phone Didnt work. It was stock no root ect. Well... I suspected maybe there was a lost/stolen or past due so i called sprint and after 4 attempts and some social engineering that SWIM is not and is proud of was able to determine there is 249 balance and they wont release the phone .. The guy lied to me and said it was deavticated and free and clear. Great.
So yesterday I find a HTC one with a cracked screen but still works.. Great. I run the MEID thru straight talk and Sprint and its good and clear.. Awesome no past due's everything is ok.
Get home tried using the Tmobile Micro Sim and completed the activation process and it goes thru ok! (Dont you love how they make ya feel warm n fuzzy..) I go into the setting on the HTC one and change the mobile data between 4g lte Cdma to gsm and then do the root and sim unlock running viper and get the hidden menu and via *#*#4636#*#* and change the settings to WCDMA GSM ONLY Gsm Auto Prl.. And nothing..
Then spent 2 hours on the phone with Straight talk, got them to cancle out the Tmobile sim and Activated a Att Mirco Sim (They Said it would be better coverage ect) And still Notta.. I got a Htc One 32gb Boot Loader Unlocked (Presumably SIM Unlock) and Rooted and Would really like to get it working on Straigh talk.. I have seen a couple of people on here that have accomplised this But cant get a response from them how they did it.
I really need a working phone cause of the kids, ect. Does anyone have any ideas?
I also have seen how some of these knock off MVNO's say that a past due bal isnt a issue and they can flash a Sprint phone No Issue.. But seems like the S3 wont work unless someone knows of a sure fire place that can do it.
Or getting my HTC ONE to work on a Sprint MVNO but im assuming they will want a UICC# or Sprint 4g Mico Sim card number. And I dont know how to get one of those or who might have them.
Any one have any solutions how i can accomplish getting a working Phone preferably with 4g.. Id even trade these damn things out at this point. I would most likely like to get that HTC One on Sprint thats been unlocked to work with straight talk using its International Capabilities and the ATT Micro Sim that is now active and registered because i have 3 months paid thru them.. Any ideas?
Click to expand...
Click to collapse
Always make sure you check the imei of all phones you purchase. You mine as well flash it to cricketr or page plus. Also you can get edge speed with AT&T gs3 on straight talk

[Q] AT&T-branded M7 can't call on T-Mobile

I've got an AT&T M7 which I'm trying to use on T-Mobile. I've carrier unlocked it through AT&T and, with the T-Mobile SIM in, I am able to get "data". Data is in quotes there because even though I see bars I can't actually get anything. Also calls and MMS don't work. SMS works reliably though.
I've made sure the only APN is one with the settings specified on T-Mobile's website.
I saw someone on the T-Mobile help forums recommending flashing with the T-Mobile flavor RUU offered on HTC's site. I downloaded it, but it doesn't seem to recognize my phone (I assume because it's checking for some sort of T-Mobile signature?)
Anyhow, if anyone has dealt with this before, I'd appreciate any advice.
For reference for anyone dealing with this in the future, it ended up being something on T-Mobile's end. They had me turn the phone off while they reset something in their infrastructure. When the phone came back up, it was able to call.

CDMA Workshop alternatives and can I get data on other carriers?

So, I've recently rooted and unlocked my device and I wanted to know if I can bring it to another carrier and still get data.? I'm using the LS991 Sprint version. I also wanted to know if there are any good CDMA Workshop alternatives; it's really expensive and I'm only gonna be using on a few devices.
Dfs
So you rooted (doesn't really matter with respect to carrier support) and you unlocked it (that's what matters with respect to carrier support) - so you put in a SIM card for the carrier you want, set the APN data (use Shortcut Master if needed, there's a version specifically modded for the LS991 directly available in my post HERE - might be a good idea to read that post as well since that's what I did myself.
Worse comes to worse if you have no luck because you unlocked your LS991, consider installing the global LS991 ROM (whether it's Lollipop ZV6 or Marshmallow ZV9 or ZVA - if you install ZVB you can never go back to anything prior so be aware of that) which will work much better for other carriers than using the unlock mod so many of us have done in the past.
Hindsight being what it is, if I knew about the global ROM when I got this G4 recently I wouldn't have mucked around with all the unlocking crap and the carrier partition at all for any reason because just installing the global ROM (or modifying build.prop to allow for global unlocked operation) is way more useful and less damaging to the phone. Modifying the build.prop isn't necessarily a cakewalk but, since someone else has already done it for others and posted the global ROM(s) for Lollipop and Marshmallow (as .img files you flash using the Send_Command.exe/dd method) it's really not a big thing anymore.
If you muck up flashing an .img file you can typically just use LGUP and a TOT file to get things working again so it's relatively safe overall, but if you muck up the unlock and trash the carrier partition content the phone will end up being pretty much useless unless you have that information safely backed up someplace (I'd say multiple backups in multiple locations, to be honest).
Anyway, if you truly want the phone to be capable of working on other carriers, my suggestion is go for the global ROM but that's just my own personal opinion on the matter. I'm using tabp0le's MellowMallow ZVB global ROM on my LS991 and T-Mobile LTE works just fine for me, for the record. It did take a little work - I wrote about how I got the full phone/data working in that post with Shortcut Master - but it does work.
Thanks for the help!
One last question, how did you get other carriers to let you activate the phone? Everytime I try they ask me imei then tell me my phone won't work on their network.
Well I've had service with T-Mobile in the past (not currently but will again soon), I have a bunch of T-Mobile microSIM cards because whenever they put the SIM card activation kits on sale for $.99 or sometimes even free (rare but it happens) I usually grab 3 at a time so I have 'em around for testing purposes. T-Mobile doesn't require me to provide any info to them, and even if I go to their website right now and input my IMEI number it'll say it's not recognized, etc but it's not relevant: it works, and that's what matters.
Most carriers don't actually require you to provide the IMEI for any reason as long as you can get one of their microSIM cards (or nanoSIM with adapter) and then get service without having to contact them. T-Mobile is somewhat unique in that process I suppose. With this SIM card I have (it's never been activated) I can go to their website and sign up for service right now and it'll be active in 10 minutes or less, sometimes when I've activated service (it's prepaid so I don't necessarily keep it month to month, sometimes I choose some other service for testing) it's done before I even sign out of their website, like 30 seconds or less and wham, the phone beeps telling me service is working.
So, the advice is: get a SIM card for the phone from the carrier you're interested in and go from there, not sure what else to suggest honestly.
br0adband said:
Well I've had service with T-Mobile in the past (not currently but will again soon), I have a bunch of T-Mobile microSIM cards because whenever they put the SIM card activation kits on sale for $.99 or sometimes even free (rare but it happens) I usually grab 3 at a time so I have 'em around for testing purposes. T-Mobile doesn't require me to provide any info to them, and even if I go to their website right now and input my IMEI number it'll say it's not recognized, etc but it's not relevant: it works, and that's what matters.
Most carriers don't actually require you to provide the IMEI for any reason as long as you can get one of their microSIM cards (or nanoSIM with adapter) and then get service without having to contact them. T-Mobile is somewhat unique in that process I suppose. With this SIM card I have (it's never been activated) I can go to their website and sign up for service right now and it'll be active in 10 minutes or less, sometimes when I've activated service (it's prepaid so I don't necessarily keep it month to month, sometimes I choose some other service for testing) it's done before I even sign out of their website, like 30 seconds or less and wham, the phone beeps telling me service is working.
So, the advice is: get a SIM card for the phone from the carrier you're interested in and go from there, not sure what else to suggest honestly.
Click to expand...
Click to collapse
You good sir are a god among men, phone and data are working like a charm. Now I can tell sprint to go **** themselves!
glad it worked for you. MY experiences with ls991, i am using it nvmode. zv6 rooted works for me with cdma data. but data doesnt work with zv9 or zva. global rom doesnt work unless, I edit build.prop target carrier to SPR . it is open to use it as global mode. I am using it in cdma nv mode.. not with any sim..
sunilromy said:
glad it worked for you. MY experiences with ls991, i am using it nvmode. zv6 rooted works for me with cdma data. but data doesnt work with zv9 or zva. global rom doesnt work unless, I edit build.prop target carrier to SPR . it is open to use it as global mode. I am using it in cdma nv mode.. not with any sim..
Click to expand...
Click to collapse
so in my case i use att on ls991. my build prop is ruim,sim i believe. now does that sound rite for gsm?
also another cdma workshop alt if qpst i used that one to rebuild my g2 a few years back
TheMadScientist420 said:
so in my case i use att on ls991. my build prop is ruim,sim i believe. now does that sound rite for gsm?
also another cdma workshop alt if qpst i used that one to rebuild my g2 a few years back
Click to expand...
Click to collapse
Ruim is basically used when it comes to cdma sim card.
"Removable User Identity Module (R-UIM) is a card developed for cdmaOne/CDMA2000 ("CDMA") handsets that extends the GSM SIM card to CDMA phones and networks. To work in CDMA networks, the R-UIM contains an early version of the CSIM application."
Your is at&t 4g gsm card. [emoji4]
Check your build.prop and search for
ro.build.target_operator: OPEN
Most probably for global mode open works
For making it work on cdma nv, i have set it to SPR
You can tweak with it by changing to options, it will also change signal bar and 4g symbol like at&t
These will show a Standered international 4G data icon for 3G/HSPA+ and LTE for LTE.
ro.build.target_county: CA
ro.build.target_operator: TLS
These will show a standered international 3G data Icon for 3G/HSPA+ and 4G for LTE (Messes up settings menu pretty bad)
ro.build.target_county: SK
ro.build.target_operator: SKT
If you want the AT&T 4G and 4G LTE Icons.
ro.build.target_county: US
ro.build.target_operator: ATT
Sent from my LGLS991 using Tapatalk
---------- Post added at 02:36 AM ---------- Previous post was at 02:26 AM ----------
My fav cdma tools are qpst, cdma workshop, dfs, revskill and bit advance is qxdm All are freely available. I cant say which one is best hahah. Trust me for me, all of them worked at some instance when i was stuck. Revskill is great with htc finding spc. Though i used dfs mostly.
Sent from my LGLS991 using Tapatalk

Categories

Resources