Hello.
My phone is now 6 months old and its running froyo 2.2.1 firmware I9000XXJPY.
And what ever i do i get this error UIDs inconsistent.....perform...and som on.
I have tried clockwork and formatet data partition and internal sd-card. Nothing works. Tried 5-6 diffrents rom same error(used odin for flash). The phone boots and just hangs after typing in pinn code.
So is there anybody out there that can help me get the phone back in working order.
Related
To start, I was using I9000XXJP2 firmware on an unlocked samsung I9000 from Bell. I installed a lagfix a few days ago and everything was working fine. The phone was really slow and freezing a lot today so I decided to restart. Ever since then, the phone is stuck on the Samsung S screen (not the one with the triangle). I can get into download mode just fine and i tried reflashing XXJP2 using odin back onto the phone. Odin does everything fine up until i see a blue 'reset' on odin and the phone is in recover mode with the options asking for me to restart the system etc. I restored to factory settings from there and even cleared the cache and restarted but it is still stuck on that "S" screen at startup. Odin only says "pass" once the phone is disconnected. So as of yet I haven't been able to flash a working ROM back on the phone. If you have any ideas as to which ROM i should try, if you could place a link with that, I would be very grateful.
I've had this problem myself a couple of times (just happened today in fact).
Boot into recovery mode (vol-up, home & power). Do you see any error messages in yellow under the menu?
I was unsuccessful at reflashing any of the Froyo firmwares so I reverted back to the last official 2.1 firmware from Bell JH2. Since I was coming from a 512 pit firmware, I didn't repartition or specify a pit file. This ended up working for me. I've since flashed to JK3 and am about to go back to JPU.
Reply:
I actually do see an error message E:can't mount /dev/block/mmcblk0p1, Can't mount SD card.
I should mention that Im using the unlocked bell phone on fido. Will i lose the unlock if i downgrade? Also, if you could point me to the site where i can download bell firmware, that would be awesome. I went to samfirmware.com and they dont have canadian versions there.
Unless one of the pros comes by and says otherwise, I understand that's the error indicating internal sdcard issues.
However... if the thing is dead, you can't hurt it more by trying some fixes
You can get the official and unofficial Bell firmwares from samfirmware.com, you just have to look in the US section. You want the firmwares starting with "i9000UG". Here's direct download links for you:
JH2 (official 2.1)
http://www.multiupload.com/ZNBT2RY5Y0
JK3 (unofficial 2.2)
http://www.multiupload.com/WTZGSKJGPF
JK4 (official 2.2)
I've heard people flashing this via CWM but I haven't see the files.
Also, I've seen references to people saying their phones begin working again after this error msg after they've left the battery hour for hours.
Let us know how things go.
Reply:
No go. When i flash to 2.1, it just shows the "S" screen and turns off. When i flash to 2.2, does the same thing as my first post. I still can get to the download screen through all of this so I hope its not messed up too bad.
I tried several times this afternoon before it worked including clearing data/cache.
Although, I had a different error message so you might be SOL in the end.
called samsung
So I called samsung this morning and they basically said they won't repair it because Bell handles repairs. Since I dont have a bell account, I can't get it repaired. I keep reading on forums that if you can get into the download mode, if you see the battery icon when you plug the phone in, its not totally bricked so i still have hope yet everything I've tried doesn't work. I tried to adb into the phone in recovery mode and it detects it but says I dont have permissions to push files onto the phone. If anyone can tell me what possibly went wrong and if it is fixable, how, that'd be awesome because right now this is a very expensive paperweight.
Hello,
I am(was) running MIUI version 2.1.13.
Recently my phone kept freezing, leaving a black screen with nothing but the backlight on.
I tried re-flashing the phone to a previous version of MIUI and after that all of my problems really began...
first of all after reflashing I can't write anything to the SD card... I mean I can but after I reboot the phone the file is gone(and if I format the card or erase a file they are back after the reboot)...
even if I manage to get MIUI or CM7 running after each reboot of the phone my login to my google account & market are lost... so basically every time I load up the phone it is as if I just flashed it. also I keep getting all sorts of services crashing notices.
when I try reflashing any other ROM I get the following error:
Can't access to '/system/csc/xee/system/'.
and the phone stays stuck on the Samsung LOGO or enters a boot loop.
I tried STOCK, Darky, Operators rom & PilotX...
Can some one please help me?
Reflashing a stock rom with odin or heimdall should always work...if not, maybe your sdcard is broken?
I popped darky ROM on my wifes galaxy I9000T about 6 months ago and she has been very happy with it, but for the last month each time she reboots it goes to recovery then reboots fine. Today however it goes to recovery then tries to load then reboots then goes back to recovery. I'm happy to load a new ROM on but Cyanogen and others say to "Install the ROM from internal sdcard using ClockworkMod Recovery" I can't get to the internal sdcard as the bugger wont boot. Any suggestions would be great?
nevermind I factory reset and wiped cache and has come back to life for the moment, I think my wife installs too many apps
Hello guys,
I have the i9000m
a few months ago I installed CM9 on my phone. Everything was fine until today. It just kept telling me that I'm running low on phone space. So what I did was, move almost all of my applications to the SD card. The notification went away and 10minutes later it was back.
It told me that my message folder was full and that I could not receive new messages. As I was trying to fix this I installed an SMS backup application to move all my msgs to the SD. The phone started acting weird so I rebooted....! Ever since, it's been stuck in an infinite boot loop. I can't access the recovery mode, but I can access the download mode.
I really need my phone for work, and this has come at the worst possible situation. I had spent a lot of time trying to install CM9 and honestly I'm getting desperate with this. I saw in this forum that some people had similar issues and that installing a kernel with Odin fixed their issues. But I couldn't understand what they were doing.
Could someone please tell me to how to install CM7 or stock Samsung Froyo on my phone with Odin? I downloaded Odin but I'm just lost!
Thank you for your time,
Do you need your data like SMS, App etc?
If not I would flash a 3 file Rom with Pit file and repartition. You can download these Firmwares from samfirmwares.com.
If you need the data try just to flash a kernel.
I recently updated my gt-p1000 to cm10, by following a youtube tutorial. After Two days of use , i encountered a bootloop.
i tried factory reset and wiped dalvk cache, cache but it still ddnt work. i then put ICS, (CM9) but still ddnt work.It still keeps restarting.
then i tried to install the latest kernel, but after i did this im stuck on the cyanogenmod logo, it just keeps rotating. I then used odin and down graded to the stock rom, and im suprised that the restarting still ddnt stop. It just keeps restrating every 20-30mins or sumtimes just after u turn it on, (10sec). Pls help Me, i've dont everything told on the internet ( wiped cache, dalvk cache, factory reset, formated sys) EVERYTHING!
Hi,
It sounds a lot like a stuck power button issue to me. Especially if it behaves the same after returning to stock.
But for other opinions and ideas, I will have your thread moved to your device section.
Good luck!
ted my galaxy tab p1000 2.2 froyo with z4mod.
Then initially I installed cwm with ROM manager for galaxy tab T because there wasn't any specific model of cwm for p1000.
But but when I switched off and booted recovery, stock recovery always came......I could access cwm only through the ROM manager ("boot into recovery")....and that too if i choose any function it starts to load and when I press home twice it says "replacing stock with cwm" and that goes on forever...
So I installed cwm with Odin as I couldn't access functions like "install" in cwm without going into the loading phase.....but as the process in Odin finished, my tab started to boot and at "galaxy", the sceen got all pixalated and it went till " samsung " and the whole process looped........ Help!
I actually was trying to install lollipop 5.0.2...