About to bash my head!!! Please help.... - Captivate Q&A, Help & Troubleshooting

Hello everyone. Tonight, nothing works on my AT&T Captivate (used on Fido here).
First, I am trying to flash Darky Official Port 7. I have copied the ZIP on my SD card and successfully boot into Recovery (CWM), but when I choose to browse for the ROM zip, I don't see it, even if I know it is there! What is happening there? I have tried everything and I can't. Find. That. *&%?% ZIP file. In the past, I have rooted and flashed many ROMs (long time lurker...), but this time.....
In desperation, I have tried to use ODIN to revert to stock; and I can't get into download mode. No matter what I do, I always finish into Recovery instead of Download Mode.
Any ideas anyone? I just want to revert to stock and then to Darky.
PS: Oh by the way, I am on a 2.2 moded AT&T ROM, but I don't know which one, since in "About Phone", the info is erroneous (kept the info from a Cognition ROM I was trying, the 1.7 Unhelpful Kernel one).

adb reboot download
/thread
wrong section

Flash Update.zip from recovery?

Xaltotun said:
Hello everyone. Tonight, nothing works on my AT&T Captivate (used on Fido here).
First, I am trying to flash Darky Official Port 7. I have copied the ZIP on my SD card and successfully boot into Recovery (CWM), but when I choose to browse for the ROM zip, I don't see it, even if I know it is there! What is happening there? I have tried everything and I can't. Find. That. *&%?% ZIP file. In the past, I have rooted and flashed many ROMs (long time lurker...), but this time.....
In desperation, I have tried to use ODIN to revert to stock; and I can't get into download mode. No matter what I do, I always finish into Recovery instead of Download Mode.
Any ideas anyone? I just want to revert to stock and then to Darky.
PS: Oh by the way, I am on a 2.2 moded AT&T ROM, but I don't know which one, since in "About Phone", the info is erroneous (kept the info from a Cognition ROM I was trying, the 1.7 Unhelpful Kernel one).
Click to expand...
Click to collapse
Darky 7 is dead, go for 8.0.1. You're positive that you have a. CWM recovery and b. the zip on the internal sd card? To get in to download, you press both volume buttons (but not power) and plug in the usb cable (but don't press power)

Xaltotun said:
Hello everyone. Tonight, nothing works on my AT&T Captivate (used on Fido here).
First, I am trying to flash Darky Official Port 7. I have copied the ZIP on my SD card and successfully boot into Recovery (CWM), but when I choose to browse for the ROM zip, I don't see it, even if I know it is there! What is happening there? I have tried everything and I can't. Find. That. *&%?% ZIP file. In the past, I have rooted and flashed many ROMs (long time lurker...), but this time.....
In desperation, I have tried to use ODIN to revert to stock; and I can't get into download mode. No matter what I do, I always finish into Recovery instead of Download Mode.
Any ideas anyone? I just want to revert to stock and then to Darky.
PS: Oh by the way, I am on a 2.2 moded AT&T ROM, but I don't know which one, since in "About Phone", the info is erroneous (kept the info from a Cognition ROM I was trying, the 1.7 Unhelpful Kernel one).
Click to expand...
Click to collapse
Have you tried the Micro USB JIG. This has saved me many times now. Let me know if you need one. I can send you one free of charge.

ztoloev said:
Have you tried the Micro USB JIG. This has saved me many times now. Let me know if you need one. I can send you one free of charge.
Click to expand...
Click to collapse
Dude, what is the Micro USB JIG?
Edit: I Googled it and I saw lots and lots of different pics, I am not sure which is the one you mean. I guess that allows to go directly to recovery or something similar?

ytt3r said:
Darky 7 is dead, go for 8.0.1.
Click to expand...
Click to collapse
OK, will do!
ytt3r said:
You're positive that you have a. CWM recovery and b. the zip on the internal sd card?
Click to expand...
Click to collapse
Yep .... Could it be something to do with my kernel? I read something about "2" kernels and "3" kernels? It's easy to get confused with the many many threads here, often it is hard trying to see if the solution explained is the one pertaining to your own problem or not...
ytt3r said:
To get in to download, you press both volume buttons (but not power) and plug in the usb cable (but don't press power)
Click to expand...
Click to collapse
Aaaarrrrggh, that *might* be it.... I think I hit Power each time..... I'll try tomorrow, I'm wasted and I might brick something by being impatient.
Thanks for the tip.
Stay tuned!

If you are able to reboot into recovery you should be able to find a way to get into download mode using odin 1.3 (not the one-click one) and adb tools...

Xaltotun said:
Dude, what is the Micro USB JIG?
Click to expand...
Click to collapse
basically tearing up a good micro usb cable to use it to put 2 wires in it to insert into your phone to activate download mode
search youtube jigs captivate and you can find a cheaper solution maybe if there is a radioshack near you

Xaltotun said:
OK, will do!
Yep .... Could it be something to do with my kernel? I read something about "2" kernels and "3" kernels? It's easy to get confused with the many many threads here, often it is hard trying to see if the solution explained is the one pertaining to your own problem...
Aaaarrrrggh, that *might* be it.... I think I hit Power each time..... I'll try tomorrow, I'm wasted and I might brick something by being impatient.
Thanks for the tip.
Stay tuned!
Click to expand...
Click to collapse
Didn't see this post before my comments, hope this works good luck

Related

[q] help i messed up big time

Help!
I have 2.2 on Rogers, rooted. I also have Cognition 3.04 installed as well as CWM. I tried to install a battery mod .zip file using CWM, but all that is happening now is that I am stuck on the startup screen (Cognition) and my Captivate just vibrates! In recovery using CWM 'reboot now' and 'reboot recovery' doesn't work. Is there anyway to 'bypass' my last (failed) installed .zip and go back to the home screen?
WHAT DO I DO? I have tried to use the recovery_update.zip file from CWM to get my phone working again but still no luck.
I SWEAR IF SOMEONE CAN HELP ME I WILL NEVER EVER TAMPER WITH MY PHONE AGAIN EVER. I WILL ONLY EVER USE IT FOR PHONE CALLS AND TEXTING. I WILL DO ANYTHING. PLEASE HELP!!!!
Can you get it into download mode?
If you can get back into recovery which it sound like you can just reflash the original rom zip.
Sent from my SGH-T959 using XDA App
Edit....and calm down, just a boot loop from a bad flash, no biggie. Though you should understand how to recover before you start.
I can get into download mode, now what?
Sorry I am clearly no good with this whole phone business...
How do I flash the original ROM when I can't get past the recovery screen? Could you please provide instructions? I am so scared! AAAARGH!
NewbDroid said:
I can get into download mode, now what?
Sorry I am clearly no good with this whole phone business...
Click to expand...
Click to collapse
if you can go into download, use odin to flash back to stock.
NewbDroid said:
How do I flash the original ROM when I can't get past the recovery screen? Could you please provide instructions? I am so scared! AAAARGH!
Click to expand...
Click to collapse
do not worry, i will be here to help you until you fix your phone.
Could you give me more instructions on Odin and flashing back to stock? I'm so sorry, if I knew how to do this I would not ask! Thanks SO MUCH!
NewbDroid said:
Could you give me more instructions on Odin and flashing back to stock? I'm so sorry, if I knew how to do this I would not ask! Thanks SO MUCH!
Click to expand...
Click to collapse
read the first sticky post in this Q & A section (question 3)... meanwhile, please let me know your build number. it is a 4 digit under your battery, looks like 1008, 1010, etc.
I think it's 10.11. th eonly other numbers are the IMEI, s/n and upc numbers.
NewbDroid said:
I think it's 10.11. th eonly other numbers are the IMEI, s/n and upc numbers.
Click to expand...
Click to collapse
ok, 1011 means build date is Nov 2010. you should just follow the link below to restore your phone:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Since you can go into download mode, do not worry, you should be fine in just a few minutes.
You can either download Designgears Odin One Click where baiscally you put it into DOWNLOAD ** and click "flash" or w.e and it puts your phone back to stock or you can use a new tool http://forum.xda-developers.com/showthread.php?t=944418 < dont know how that is have never treid. Basically theyre both one click so shouldnt be too hard.
steps r put ur phone into DOWNLOAD MODE aka, shut off phone take of sim + microsd if you have any, then put battery back in, while holding both volume buttons pressed, plug in USB cable (MAKE SURE YOU HAVE ODIN OPENED FIRST), once your in the recovery screen you should see the COM:12 or something like that on odin (also make sure you have samsung usb drivers installed.)
press flash and should put it back to stock. IF THAT DOESNT WORK, you MIGHT have an internal SD card that is dead. then your phone is useless(never had this happen to me on captivate, just on vibrant i9000m)
Good luck.
ed116 said:
You can either download Designgears Odin One Click where baiscally you put it into DOWNLOAD ** and click "flash" or w.e and it puts your phone back to stock or you can use a new tool http://forum.xda-developers.com/showthread.php?t=944418 < dont know how that is have never treid. Basically theyre both one click so shouldnt be too hard.
steps r put ur phone into DOWNLOAD MODE aka, shut off phone take of sim + microsd if you have any, then put battery back in, while holding both volume buttons pressed, plug in USB cable (MAKE SURE YOU HAVE ODIN OPENED FIRST), once your in the recovery screen you should see the COM:12 or something like that on odin (also make sure you have samsung usb drivers installed.)
press flash and should put it back to stock. IF THAT DOESNT WORK, you MIGHT have an internal SD card that is dead. then your phone is useless(never had this happen to me on captivate, just on vibrant i9000m)
Good luck.
Click to expand...
Click to collapse
please note one-click will NOT work here since the build number is 1011.
Thanks so much for th ehelp so far, what I am worried about is flashing it to i897 (AT&T) instead of i896 (Rogers) which has happened before. When that happened the phoen refused to recognize my SIM card, etc and I had to bring it back into the store to be shipped back to the factory, etc.
Any idea if this will bring me to i897 or i896?
Thanks again!
think this might help? it was on the first page of the dev forum
http://forum.xda-developers.com/showthread.php?t=905042
NewbDroid said:
Thanks so much for th ehelp so far, what I am worried about is flashing it to i897 (AT&T) instead of i896 (Rogers) which has happened before. When that happened the phoen refused to recognize my SIM card, etc and I had to bring it back into the store to be shipped back to the factory, etc.
Any idea if this will bring me to i897 or i896?
Thanks again!
Click to expand...
Click to collapse
basically 897 and 896 are same. if you really want to flash to roger rom, you may need to search the forum for that.
Alright I'm going to try using the one on that link you posted, for Clockwork Recovery Flashable: (To be applied from Stock 2.1). However, I will be applying it from 2.2. Do you think it might still work?
Pirateghost said:
think this might help? it was on the first page of the dev forum
http://forum.xda-developers.com/showthread.php?t=905042
Click to expand...
Click to collapse
this should be fine, use odin since you are able to get into download mode.
can you still get into clockwork?
Yes I can still get into clockwork. Thanks again for all the help so far, I really appreciate it!

[Q] Bricked [MIUI]?

Hi all. I'm hoping someone can advise me on what to do.
I was rocking MIUI beta 8, and saw RC2 came out. On the i9000 page, it had a version for cappy. Something I didn't pay attention to is that it said I was supposed to be on 2.2 (whereas I was on 2.3 with miui already).
So i flashed that, did my usual steps, and booted. And I hang at the cyanogen boot screen.
I can get into CWM, but i can't get into download mode (i usually use the vol buttons + plugged in, insert battery method).
Since i can't get into download, I can't use Odin. Adb doesn't recognize a device connected.
I have on my phone a few versions of MIUI, the efs-backup, captivate-initial-kernel, and the kang kernel for the captivate. Is there anything I can do?
If i purchase a jig, will it work regardless of this?
Is there anything else I can do? I have an external sd card, so I think i could put a file on that and access it via cwm.
Thanks!
Did clockwork make any backups? If so restore one.
If you have the version of MIUI you were running before on the SD card, you can flash back to it.
I don't have any backups (cause I'm silly).
I have the previous versions, and I've tried to flash them with no success.
I flash the beta 8 (which i what I was using previously), then install the kang kernel, and wipe data cache and system. No go.
If you can read your external sd, it could save you.
also, a jig forces the phone to go in DL mode so I do presume it would work (btw you can make one yourself with 3 resistors and some tape.. it's cheap and you don't have to wait days to receive it).
As mentioned, CWM recovery could save you alot of trouble, if you made a backup that is.
I dont want to cut my own cord though. I would rather grab one off ebay for $8 if i need it.
is there something I could flash via CWM?
mswirski said:
I dont want to cut my own cord though. I would rather grab one off ebay for $8 if i need it.
is there something I could flash via CWM?
Click to expand...
Click to collapse
As for the JIG, 3 100k resistors can just be put together (no need to cut anything.. all you need is patience and tape lol).
And for flashing, I'm not sure it's such a good idea since u're on CM7 (correct me if I'm wrong) - It's really different than other ROMs and most likely not compatible with most rdm flash as it is 2.3 based.
I'd honestly suggest Odin 1 click once you get your JIG, that way you can be sure not too mess up royaly trying too many things. Patience might be your best friend here
You don't need to cut the cord. Check that one in my sig lol.
Can't you use CWM to reboot into DL mode? I thought that there was something like that in there.
Twicebak3d said:
You don't need to cut the cord. Check that one in my sig lol.
Can't you use CWM to reboot into DL mode? I thought that there was something like that in there.
Click to expand...
Click to collapse
CWM doesn't have that option, can only reboot into recovery.
Twicebak3d said:
You don't need to cut the cord. Check that one in my sig lol.
Can't you use CWM to reboot into DL mode? I thought that there was something like that in there.
Click to expand...
Click to collapse
I looked at your sig. I think I will try that.

[Q] SS AT&T Captivate stuck on ATT Splash Screen

Hi, I have a SS/ATT Galaxy S. It was working fine. I made the mistake of running an update to change the ATT splash screen. The device boots to the ATT splash screens and stays there. You can hear the SS start up sounds as though the unit booted ok.
I've tried various Odins they all hang on file analysis. I've tried using different computers per the recommendations in the various threads. I've tried many of the one click and also separate file updaters. They all hang on file analysis.
I am able to use Droid explorer to view the device. I've also put a new update.zip on an sd card but nothing seems to change the splash screen.
I'm not sure how to tell what version the unit is currently on.
I can get to the 3 button state. It says Android System recovery <2e>.
I have the options to reboot, reinstall packages, delete all user data and delete cache data. I've tried each of them, no change.
I have tried to read many threads before bothering anyone. Your input would be appreciated.
Thanks
if you have the update.zip on your phone, in the root of your SD card.. then from 2eRecovery, select reinstall packages.. may have to do it twice. That will boot your phone into clockworkmod recovery.. and from there you should be able to mount storage- put a ROM on your device, flash and be good to go.
Reply to thread
Hi, Thanks for the fast response. I've tried update.zip on both an sd card and also via droid explorer, about 5 times. If I reboot, same thing, the ATT splash is there, and the Galaxy boot sound. I can get into recovery and droid explorer works. If I try Odin it hangs on file analysis. Anything else I can try? Thanks again.
Are you in dl mode when you try this, or recovery?
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
If you can get to dl mode try using AIO Captivate to flash back to stock 2.1. I've had success as I flashed with the partition checked and had to go all the way back using ODIN contained in the AIO Captivate program. Found here
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
Yeah if you can get into download mode than you are not bricked. I would Odin or Heim back to JF6 and go from there. What happened when you tried reinstalling packages from 2e? I know you said everytime you reboot- but what did it say when selected reinstall packages?
Sent from my SGH-I897 using XDA Premium App
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Great.. glad to hear it
Sent from my SGH-I897 using XDA Premium App
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Now on to some real ROM flashing!! Glad you got it working. I did almost the same thing and was sweating bullets.
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Delphin9 said:
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Click to expand...
Click to collapse
Of course it is worthed it to move to 2.3 I mean, it comes with so many more features and is running just perfect as a everyday rom. You shouldn't be disapointed
Sent from my Mosaic powered I896 using Tapatalk
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
mrhaley30705 said:
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
Click to expand...
Click to collapse
+1.
I had to make a jig when I soft bricked it. Not fun. Since then I purchased one and am glad I did.
Well, that means I won't have wasted my $2.00.
I saw this and thought it worth to try. http://www.youtube.com/watch?v=D0aoabVtPJ8
In your footer, it says you're using mosaic.
e.g. ROM: Mosaic III, ¤Kernel: Xcal's #14, ¤Modem: JK4, ¤Launcher: ADW Ex
Can you point me to the correct files/process? I guess I'm scared of screwing it up again. when I look on the forum there's almost too much info for a noob to choose which is best. Cheers...

[Q] Captivate Bricked after Odin One Click

Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
yakobo said:
Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
Click to expand...
Click to collapse
You'll have to use the full Odin program and grab a stock ROM from the development section. Once your in download flash stock ROM with through Odin or heimdall. I'm not next to my computer so I don't feel like fishing for links ..but should be fairly easy!
Sent from my SGH-I897 using xda premium
yakobo said:
Hello. I have searched the forums and have not really found out an answer to my question. Earlier in the week I tried installing Andromeda with an ursa minor kernal I believe? (I was following a tut on youtube) I succesfully got ursa minor on my phone but the tutorial failed to mention I had to put Andromeda on the internal sd card to flash it. (first time trying to flash a rom so big noob). I decided to go back to stock and retry using Odin One Click. Odin bricked my phone because it is build number 1108 :/ I have an infinite ATT world phone boot loop because of this. I will be trying to make a jig/buying one soon to get back into download mode to fix this. I am not sure exactly what I am supposed to do once I am in download mode. I want to get back to stock. Obviously Odin One Click doesn't work because of my build number. What steps should I follow to go back to froyo 2.2 and to retry? Please help I am just not sure.
Click to expand...
Click to collapse
This is a Odin 1 click for KB1 2.2 stock. After that follow any roms instructions except if it says stock 2.1 ignore it and assume its stock 2.2
I was wondering if I should follow this thread??
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Might I ask do you need to get to 2.1?
prbassplayer said:
Might I ask do you need to get to 2.1?
Click to expand...
Click to collapse
When I got my phone (about a two weeks ago) it came with 2.2 already on the phone. I don't need to get to 2.1 but I was thinking I'd go to 2.1 and then upgrade to 2.2 using att? If I can?
But why? If you got it as is and its stock its att's 2.2. At any rate If your so inclined on flashing 2.1 the one you mentioned thats using full Odin with pit should work. I suggest doing it if and only if you have that jig handy. Also keep in mind that .tar probably has bootloaders in it (wich is a risk you really dont need to take) just my 2 cents
prbassplayer said:
This is a Odin 1 click for KB1 2.2 stock. After that follow any roms instructions except if it says stock 2.1 ignore it and assume its stock 2.2
Click to expand...
Click to collapse
Links in that thread seem to be broken:/ So I suppose I can't use that.
Ive never used this one but it is also a KB1 2.2 KB1
My ultimate goal is to get Andromeda3 on my cappy. It seems to be a good rom. Could I just flash that using oden? (put it in the pda slot) or will that not work until I go back to stock?
With this new thread you linked me to, Just put in odin and I should be good to go? Thank you for your help by the way.
Ive never used that rom. Follow their instructions and assume stock is 2.2 for you. Also The original link i sent you should have worked. Aperrantly mediafire.com is having issues tonight.
installing Andromeda3 doesnt require going back to stock, 2.2 or 2.1.
ODIN flash a custom CWM kernel
boot to recovery
flash rom
thats it
Pirateghost said:
installing Andromeda3 doesnt require going back to stock, 2.2 or 2.1.
ODIN flash a custom CWM kernel
boot to recovery
flash rom
thats it
Click to expand...
Click to collapse
I can't because I bricked my cappy. i can't go into recovery right now. I need a jig to get back into download mode to fix it.
prbassplayer said:
Ive never used that rom. Follow their instructions and assume stock is 2.2 for you. Also The original link i sent you should have worked. Aperrantly mediafire.com is having issues tonight.
Click to expand...
Click to collapse
Once I get my jig hopefully mediafire is up and I can download from the first link you sent me. That seems to be my best bet right now. Thank you for your help. I sure hope I can get my phone backXD
yakobo said:
I can't because I bricked my cappy. i can't go into recovery right now. I need a jig to get back into download mode to fix it.
Click to expand...
Click to collapse
you are stuck in a boot loop right?
if you power your phone off, hold down both vol buttons and hold down the power button until the ATT screen comes up, let go, does it not go into recovery mode?
or
download mode:
power off, while holding both vol buttons, plug in usb. does that not work?
yakobo said:
My ultimate goal is to get Andromeda3 on my cappy. It seems to be a good rom. Could I just flash that using oden? (put it in the pda slot) or will that not work until I go back to stock?
With this new thread you linked me to, Just put in odin and I should be good to go? Thank you for your help by the way.
Click to expand...
Click to collapse
Get ursa minor back on your phone, then mount usb in mounts and storage, then copy the Andromeda3 zip to the drive. You were almost there.
Fish around in the usb port with 301kOhms of resistance from radio shack. You will hit pins 4 abd 5 and you will be in download mode.
Pirateghost said:
you are stuck in a boot loop right?
if you power your phone off, hold down both vol buttons and hold down the power button until the ATT screen comes up, let go, does it not go into recovery mode?
or
download mode:
power off, while holding both vol buttons, plug in usb. does that not work?
Click to expand...
Click to collapse
No:/ no button combos work to get me in recovery or download mode. Getting a jig (hopefully today) so I can fix all this. Yes it is in a boot loop
AdamOutler said:
Get ursa minor back on your phone, then mount usb in mounts and storage, then copy the Andromeda3 zip to the drive. You were almost there.
Fish around in the usb port with 301kOhms of resistance from radio shack. You will hit pins 4 abd 5 and you will be in download mode.
Click to expand...
Click to collapse
Thanks. I tried putting the Andromeda on the phone by copying it over to the phone through the mounted sd card but it was all of a sudden "write protected" and showed up as a cd instead of an sd card. :/ I know I was real close but I made some mistakes along the way
also, when you say fish around the usb port. you mean inside the phone? Is there any danger of hitting the wrong pins and possibly hurting my phone? (say i hit pins 3 and 5 by mistake or something) or is it all pretty safe? I was going to try and attempt the jig method that only used the resistors but n oticed the pins were horrible small in the phone:/
yakobo said:
Thanks. I tried putting the Andromeda on the phone by copying it over to the phone through the mounted sd card but it was all of a sudden "write protected" and showed up as a cd instead of an sd card. :/ I know I was real close but I made some mistakes along the way
also, when you say fish around the usb port. you mean inside the phone? Is there any danger of hitting the wrong pins and possibly hurting my phone? (say i hit pins 3 and 5 by mistake or something) or is it all pretty safe? I was going to try and attempt the jig method that only used the resistors but n oticed the pins were horrible small in the phone:/
Click to expand...
Click to collapse
It's not inside the phone... it's the USB port on the phone. One pin is on top and the other is on the bottom. If you don't have a JIG, that's the easy way to do it. There's no power on the USB port. This is a quick way to do it. You'll be fine. It's safe.
AdamOutler said:
It's not inside the phone... it's the USB port on the phone. One pin is on top and the other is on the bottom. If you don't have a JIG, that's the easy way to do it. There's no power on the USB port. This is a quick way to do it. You'll be fine. It's safe.
Click to expand...
Click to collapse
Sorry, that is what I meant. I meant to place where the charger is plugged in to. Just seems like the pins are really really tiny. Thank you for your help gonna get my resistors hopefully today and get my phone working again.

[Q] Need to straight up nuke my I9000 - Many an issue

Hey guys, it's been a while!
Anyway, before I even got my I9000 I had everything sorted to install Darky's ROM and the Speedmod kernel. Some time between them working perfectly and now, I plugged the phone in to Kies and it has tried to update me to GB. SM and DR did not like this.
I managed to do a factory reset (or whatever it is in CWM), and that got the phone to boot, but it isn't pretty. I get the kind of graphical messing up that a dying GPU would render whilst booting the phone, it reboots 25% of the time I am using the music player, and I can NOT boot in to download or recovery any more. I already tried plugging it in to Kies in the hopes it could just wipe the phone over and start again, but it simply does not recognise it.
Likewise, I would look in to the files I need to just do the equivalent of a full format with Odin/ADB, but without download mode I don't think that would even work.
So, the question is; just what the **** am I supposed to do?
USB recovery jig.
can you get into your phone ??????????? I mean can you reach Settings ???? because I didnt read all your speech .
Search for "recovery.tar" and flash it with MOBILE Odin, this would give u cwm and flash a new rom in cwm or flash a stock rom with mobile Odin. Good luck
snapper.fishes said:
USB recovery jig.
Click to expand...
Click to collapse
Hmm, good idea. I'll see what I can do.
hassanalip21 said:
can you get into your phone ??????????? I mean can you reach Settings ???? because I didnt read all your speech .
Click to expand...
Click to collapse
Phone is more or less functional, it's just that I can't get in to Recovery or Download. At all.
zodiaxe66 said:
Search for "recovery.tar" and flash it with MOBILE Odin, this would give u cwm and flash a new rom in cwm or flash a stock rom with mobile Odin. Good luck
Click to expand...
Click to collapse
Mobile Odin? Interesting, will look in to it.
EDIT: This recovery.tar; should it be on my phone already or do I have to find one? Because Astro can't find jack **** on my phone.
EDIT2: Scratch that, found it. Trying to flash it using "Open File..." has just resulted in it being stuck at:
"Flashing...
Flashing Kernel..."
for the last 10 minutes...
Thanks for the replies so far guys!
solved it ???????????
Nope. Sorry, I have been editing that post rather than enter new posts (until someone else posts, of course).
EDIT: Still flashing...
Ok, it now won't boot at all (stuck at the Samsung splash load screen), BUT, importantly, I can get in to download mode and CWM recovery.
What do I download and do to entirely wipe the **** out of this phone and start again?
EDIT:
Fixed. Sorted. Thanks for your help guys, it is much appreciated.

Categories

Resources