Hi all ,
Please help me . When I upgrade my liquid by acer-a1-tool . suddenly my acer liquid is close and the acer-a1-tool tell me your device it is not connect .
After that I am separated wire from my liquid and I am try to turn on my acer liquid but it did not respond . And the all buttons not respond .
Please help me . Because it is new and I am bought is before 2 weeks .
Sorry my English is poor .
help is here !
try copying the .zip files of any custom rom.. n then copy to SD card n insert in phone n run the phone is recovery mode (volume dwn + camera + power)
phone will vibrate thrice n then release the buttons.. u r ready to insatll the new rom..
or
if u want to get it done on A1 tool, then proceed normally, if it tells device not connected or something, simply unplug the usb (from phone, NOT from PC) and re-insert. A1 tool will re detect n proceed with installation !
cheers
iDiamond said:
Hi all ,
Please help me . When I upgrade my liquid by acer-a1-tool . suddenly my acer liquid is close and the acer-a1-tool tell me your device it is not connect .
After that I am separated wire from my liquid and I am try to turn on my acer liquid but it did not respond . And the all buttons not respond .
Please help me . Because it is new and I am bought is before 2 weeks .
Sorry my English is poor .
Click to expand...
Click to collapse
Go to modaco. there are more developpers for liquid. I think someone could help you
Related
im new to the site , ive got samsung galaxy s gt 1900 16gb , ive tried every thing to root and custom rom it, been such a fail . i cud do with alot of help . i rooted the fone with z4 root . and did rom manager as holding volume up n down and power button didnt work i went through rom manger to reboot and click unzip and sommat else cant remember then said not worked basically and click boot up . help wud b appreciated
having issues with this
ok ive got a galaxy s 16gb 2.2 froyo . ive tried to follow all the instructions to install a custom rom and it wont work. i cant reboot phone by holding volume buttons and power buttom, i did reboot through rom manager and clicked sd thingy and sed nothing found basically, the guy on the video went onto one click lag fix OCLF. and click available and then he click "root device recovery 2e" and then his did something, mine does not have this wen i open OCLF.
so how do i do it . please help me . i do not wont to brick this . comment if u can help . rep given
Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?
If u can access download mode than its not bricked download a stock rom flash it.....
sent from my GT-I9000 using xda premium
this is where I get stuck
http ://img706[DOT]imageshack[DOT]us/img706/8782/30950752[DOT]jpeg , sorry for the lame link I can't post outgoing links yet.
i have no idea what odin version to use or which one works, what ROM to use , all those files are from different sources i dont tink that's right
dualzo said:
Hello everyone , I recently bought a GT9001 also known as galaxy S plus , so here's my desperate problem ... today about 4 hours ago , that POS program Samsung Kies told me there's a new firmware available so I hit upgrade ... it got stuck at about 60% then after 1 hour and a half I unpluged the phone from the USB ... since then I can't get rid of Recovery Mode .... before all this the phone had Android gingerbread , was working perfectly I loved it .. and now I think it's bricked ... I'm not good at this , I've tried with odin .. but it gets stuck ... please someone kind enough , help me get it back to its default state ... i have no idea what I'm doing here ... and i'm kinda desperate i need the phone asap
gotta mention I was able to get it in download mode via the three buttons ... can someone tell me what i need in order to fix it?
Click to expand...
Click to collapse
use Kies recovery procedure http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
Flash a i9001 rom using odin
so I've been trying for 5 hours to fix my semi-bricked phone and I can't do anything .... I've tried with odin 4.43 and some stock ROM-s ... but it gets stuck ... god damn it what should I do , i have no warranty ... GSM service , do they know how to fix things like these? it seems complicated
http[dots]//img18[dot]imageshack.us/img18/6763/96005243[dot]jpg ---> i get stuck with odin here
L.E
So I finally managed to fix it with AiresVE.ops , MultiLoader Odin v.4.43 and an official ROM from sammobile , it took 8 minutes but I had to do it on my laptop. Thanks for everything guys.
Hi,
some time ago i got the same problem But don't worry it's easy to solve..
Just download this one:
http://forum.xda-developers.com/showthread.php?t=1694617
and download this one to get a stock rom:
http://forum.xda-developers.com/showthread.php?t=1032437
or i recommend the broodrom which is based on the valuepack an works just flawless on my i9001
http://forum.xda-developers.com/showthread.php?t=1696381
then copy both .zips to your external sd and then boot into recovery (press vol+ and power button.. wait 3-5sec and release.. when the android thing & a box appears press and hold the home button (the left touchbutton))
if you're now in the recovery mode, click on "install update via zip" or something like that..
then you navigate to your external sd where the 2 files are
then you install the teamwinrecovery (zip file) after that you shutdown your system (pull the battery^^)
then boot again into recovery and you will see a new recovery (it's the teamwinrecovery)
this can be controlled with your touchscreen
now you click again on "install update via zip" or something like that an navigate again to your external sd..
for that you should navigate on the tip level and open a folder called "emmc"
There you install the other zip (it's your rom) an wait until it's finished
it will reboot automatically
If you get stuck in a recovery loop you should flash the bootloader with odin.. (instructions are given in the teamwinrecovery thread)
Good Luck and sorry for my horrible English
You can send me a pm if you have questions
I Got Micromax A26 Bolt And Getting Weired Problem , That When I Touch On It To Use It Just Malfunction (eg.When i Open Menu It Closes Automatically ) . So i Reseted Phone With Android MultiTool Then To The Problem Is Not Solved , So i Decided To Flash The But While Flashing IT Stucks On Waiting In FTP type . Please Tell Me How To Reflash The Phone . Need Urgent Help
rkumbhar said:
I Got Micromax A26 Bolt And Getting Weired Problem , That When I Touch On It To Use It Just Malfunction (eg.When i Open Menu It Closes Automatically ) . So i Reseted Phone With Android MultiTool Then To The Problem Is Not Solved , So i Decided To Flash The But While Flashing IT Stucks On Waiting In FTP type . Please Tell Me How To Reflash The Phone . Need Urgent Help
Click to expand...
Click to collapse
Hlw Bro
Mmmmmm Well Go Through a Video Tutorial Follow all steps
surely will help u
here is the link
http://m.youtube.com/watch?v=vCs3i1QLUso
HIT THaNks
I tried to install rosemary fonts in my turbo ... I flashed the zip with cwm recovery ... After flashing it , the phone got stuck on canvas turbo logo ... I tried to flash the stock rom .. Bt while connecting it to sp flash tool i removed out the usb when device was detecting in sp flash tool ... The phn is not starting up now... Led is also not glowing when i connect it to charging before connecting in sp flash tool charging was done ... Now the phn is juzz not starting up ... I took it to care center bt they are saying tht internal display is broken out and it costs more than 7k ... I cant understand thts it software or hardware issue ... Is my phone brick ? ... I juzz can't under tht what is happened to my phone .. Needed expert advice urgent ... Plzzz plzzz help out
Use "Format+Download" option in SPtools
SPtool us not detecting only now my phone
_yassh_ said:
SPtool us not detecting only now my phone
Click to expand...
Click to collapse
Reinstall drivers and try again.
I tried a lot ... Bt my phone is dead nd it's showing nothing
plzz help me out
battery removal.
_yassh_ said:
plzz help me out
Click to expand...
Click to collapse
.
I heard we can connect with simulating battery pulling or removing the battery any body no how to remove the battery
Factory reset your phone
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
afireon8 said:
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
Click to expand...
Click to collapse
It is recommended never to use "download+format all" option ......I have many times used sp flash tools for flashing stock rom ....I always used "firmware upgrade" option......I never faced any problem ....
same here bro...
my a1 also dead after flashing and not powering on
not even shows charging....
plz post if found any solution...
found something
i cannot try this because i dont hv fon with me....
http://forum.xda-developers.com/showthread.php?t=1943442
Try latest sptool i also face this problem & flash stock rom lollipop build may it will help you )*
just use sp flash tool 5.142
Guys m facing the same problem... Using sp flash tool version 5.1604 .. Help me plz