I had a problem with the radio and went to my dealer and he did a factory reset. When the phone boots it now hangs on the Samsung logo. I was running Darky's v5.2 gingerbread edition voodoo. The phone was rooted and the 3 button function was working ok.
Now I can only use the power+down volume+home combo and it goes into download mode and says Downloading... Do not turn off Target!!!
In this mode neither ADB or Odin will connect. If I do a normal boot Odin will connect but i can't do anything. When I try the power+vol down+home boot it just goes into a reboot loop.
i've read all the tricks to get into recovery mode but none are working for me. I need to get it back to factory original so I can send it for warranty repair. The phone is only 2 months old.
Any ideas welcomed.
i'm having the same problem, i was running darky's v8 then i did a factory reset and now it won't bootup, i can get into download mode but not into recovery mode
1. Threads,for this already exists.
2. Download odin and stock firmware from samfirmwares.com
3. Download 512 pit file.
4 flash csc,modem,pda and pit in odin
panamaggs said:
I had a problem with the radio and went to my dealer and he did a factory reset. When the phone boots it now hangs on the Samsung logo. I was running Darky's v5.2 gingerbread edition voodoo. The phone was rooted and the 3 button function was working ok.
Now I can only use the power+down volume+home combo and it goes into download mode and says Downloading... Do not turn off Target!!!
In this mode neither ADB or Odin will connect. If I do a normal boot Odin will connect but i can't do anything. When I try the power+vol down+home boot it just goes into a reboot loop.
i've read all the tricks to get into recovery mode but none are working for me. I need to get it back to factory original so I can send it for warranty repair. The phone is only 2 months old.
Any ideas welcomed.
Click to expand...
Click to collapse
Put it in odin flash new kernel and unplug usb then you se broken fimware then reflash
Same old story flash Darky rom and now its broke don't ask Darky how to fix it v.
jje
Ajjter said:
1. Threads,for this already exists.
2. Download odin and stock firmware from samfirmwares.com
3. Download 512 pit file.
4 flash csc,modem,pda and pit in odin
Click to expand...
Click to collapse
I've read all the same issue posts but none solve my problem. I can't get Odin to connect to the SG. If I put the SG in download mode with the 3 button combo, Odin won't connect. ADB also can't connect to the SG as the SG won't boot. I've tried everything suggested but it simply won't connect. I guess the SG is now a bin job. The only way to get a connection in Odin is to let the SG boot and hang then connect. Odin can see the SG but you can't do anything unless the SG is in download mode. ADB can't reboot the SG either. Something must be wrong with SBL but I can't find a way to fix it. My fingers are sore from so many 3 key combos over the last few days.
Full brick and leave it in for repair and blame on kies?
Ajjter said:
1. Threads,for this already exists.
2. Download odin and stock firmware from samfirmwares.com
3. Download 512 pit file.
4 flash csc,modem,pda and pit in odin
Click to expand...
Click to collapse
All the thread answers require the use of ADB and or Odin. This is the problem, I can't get the SG to connect to Odin when the SG is in download mode. Something is wrong with the SBL so the download mode isn't working. If I could get the download mode fixed the rest is easy. The only time Odin can see the SG is when I let the SG boot normally and it hangs. Then I connect the USB and Odin sees the SG. As it is not in download mode, Odin can't send anything. ADB gives an error that it can't connect to the device so I can't use ADB to put the SG in dl mode. To summarize, I can only get the SG to either hang on boot or go into a faulty dl mode with the 3 key combo.
Sounds more like a USB problem. Change USB port and or remove and reinstall Kies/USB drivers .
jje
so you could never get into recovery mode or only after he did a reset?
if it's not a usb problem as suggested above then i agree with "Full brick and leave it in for repair and blame on kies?", if they can't get it in dl mode or recovery either they won't know what you've done to it, or they might, so leave that as a last option
Related
I have tried everything, flashing with odin does not seem to work every time my phone starts up it just stays on the Samsung bootup screen then turns off for a split second and comes back on to that screen again. I have tried everything. I AM able to get in download mode so i can flash my phone but that is IT as recovery mode doesnt work, as i have tried all the methods.
-my phone was rooted and flashed and lagfix was applied.
Any1 know what i can do?
help would be greatly appreciated as my phone doesnt have wanrranty from Bell
( mutters)
ohhh
u should always disable a lagfix beforw installing a.rom.
( iv been with an android for a year and i know this?? lol) anyway try getting into download mode and factory reseting. if that doesnt work try connwcting to kies or if thoses dont work.....
CONGRATUALATIONS YOUR PHONE IS OFFICIALY BRICKED!!!!!
THE ONLY THING U HAVE TO SAVE U IS YOUR WARRENTY
HAVE A NICE DAY
how do i factory reset if i cant get into recovery mode or anything? i can only get into download mode. Is there a way to factory reset with kies or odin
Try the 3 button fix and see if u can get into recovery mode after that
http://forum.xda-developers.com/showthread.php?t=785201
i tried it, im only able to get download mode. Am I SOL? or is there a way i can enter recovery mode
You sure u did it corrently? pressed volume up + power + home and when the i9000 logo appeared released power
If not find some guide on going into recovery mode using adb
http://forum.xda-developers.com/showthread.php?t=723596
paulcordi said:
how do i factory reset if i cant get into recovery mode or anything? i can only get into download mode. Is there a way to factory reset with kies or odin
Click to expand...
Click to collapse
yes there is!!!
but with odin though( which is unfortunatley the hard way )
but before i tell you the odin way..............
feast your eyes on this: http://www.youtube.com/watch?v=eLYkMk16la8
first flash xwjm8 with odin
Then flash your region's eclair firmware. From there you know the route.
Wish you all the best.
thank you, i shall give it a try right now
Need to get a firmware with 4 files (pit, phone, modem, csc) then flash with odin and repartition. Should work now.
Sent from my GT-I9000 using XDA App
blockbusta said:
Need to get a firmware with 4 files (pit, phone, modem, csc) then flash with odin and repartition. Should work now.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
There is one: http://forum.xda-developers.com/showthread.php?p=11003642#post11003642
Repartition first, then flash the three files and everything should be OK then...
How can i get adb to see my device? i can get into download mode but that is it. Adb says device not found. I cant turn on the phone therefore i cant also get into usb debugging mode. Is that a problem? how can i get it to read my device?
paulcordi said:
How can i get adb to see my device? i can get into download mode but that is it. Adb says device not found. I cant turn on the phone therefore i cant also get into usb debugging mode. Is that a problem? how can i get it to read my device?
Click to expand...
Click to collapse
oh well u didnt turned on ur debug mode u adb wouldnt read ur phone, the best treatment for that is to flash ur phone with Official Roms, theres nothing to worry about if u can still go to download mode and if odin can detect ur phone
whats bells firmware called?
I did an Odin wipe and now the touch isnt working on my phone!! What do I DO!? Its stock so it goes straight to MTP transfer instead of debugging and I cant change it. PLEASE HELP.
What do you mean the touch? Give more details
Alright, well I was having problems with dig11fs rom so I decided I wanted to install serendepity 5.0. I plug in my phone, run odin and go into download mode. Once in download mode I press start and it goes through and does the factory reset of my phone. My phone turns on and the "swipe screen to unlock" screen comes up. I try to swipe it and nothing. I try going back to download mode and maybe running odin again. Not working. I try different things but overall my touch screen isnt working at all. I went to recovery and deleted user and cache thinking maybe something will work. Phone boots back up and still nothing. I can't do anything cuz I cant get to usb debugging without being able to use the touchscreen.
I just did a master clear with odin and still my touch screen isnt responding! The buttons are working fine but the touch screen is not.
This is a new one.
Pull battery or for a couple minutes. Then try again
what is the build of your phone, located under battery, something like 1008
I think you are in store for a jig
It says 10.08 on the white sticker under my battery.
Have you used odin before, what its the name of the odin file you used?
I have used odin a few times before. Not a problem. I tried the battery pull, nothing.
I used the newest odin "I897UCJF6-final-OCD-REV0.zip" I just downloaded it about an hour ago.
Good news is that you are on stock, so if need be call at&t and file warranty claim. You said matter clear went through correct/
Have you had problems with three button combo in the past?
Do you know what a jig is?
I can get to download mode no problem with the 3 button method. Thats not the problem and I have ideas of what a jig is but if it can help me right at this moment i would appreciate the information.
You can still.get into dl mode?
Have you tried odin flash more then once
Bleepm said:
I can get to download mode no problem with the 3 button method. Thats not the problem and I have ideas of what a jig is but if it can help me right at this moment i would appreciate the information.
Click to expand...
Click to collapse
A jig wont help, if you can get to download mode you don't need a jig. this sounds like a bad flash, try flashing stock again.
Yes I can get into dl mode and I tried twice so far.
I actually have a charger in my house that will disable the touch screen. I once made the mistake of trying to flash using CWM while my phone was plugged up to that charger and when everything booted back up my touch screen was disabled completely. I was able to Odin back to stock and reflash everything.
Bleepm said:
Yes I can get into dl mode and I tried twice so far.
Click to expand...
Click to collapse
Go find the post for the Stock rom with the 3 button fix and the ODIN that is not one click and use that. the one click downloader does strange things sometimes. READ THE INSTRUCTIONS IN THAT POST COMPLETELY BEFORE FLASHING.
This one.
1. Download ODIN and the PIT file and extract it somewhere.
2. Download the PDA file and put it in the directory where you extracted ODIN and PIT to.
3. open ODIN and click the PIT button and choose the PIT file that came with it.
4. click on the PDA Button and choose the PDA.tar that you downloaded from the post.
5. power off your phone completely.
6.Hold down vol up and vol down and plug in the cable.
7. Click start.
So i tried using a different charger, nothing. I'm trying to run the not one click odin.
rpicaso said:
Go find the post for the Stock rom with the 3 button fix and the ODIN that is not one click and use that. the one click downloader does strange things sometimes. READ THE INSTRUCTIONS IN THAT POST COMPLETELY BEFORE FLASHING.
This one.
1. Download ODIN and the PIT file and extract it somewhere.
2. Download the PDA file and put it in the directory where you extracted ODIN and PIT to.
3. open ODIN and click the PIT button and choose the PIT file that came with it.
4. click on the PDA Button and choose the PDA.tar that you downloaded from the post.
5. power off your phone completely.
6.Hold down vol up and vol down and plug in the cable.
7. Click start.
Click to expand...
Click to collapse
That worked!! Except i did the JH2 becaues that was the first one I saw. Wow I am SO relieved.
Hi people!
I got bricked my galaxy mini gt-s5570, but not totaly (that means I can still use the download mode, and RAMDUMP ARM9 mode) but I can't power up the phone. That happened after I used ODIN for gt-s5570 and changed the Kernel (I forgot to make backup before), and device was working well with the new kernel, but after it I use the same step in ODIN to get back to the old one. So the result is, when I'm pushing the power key the screen starts to blinks and nothing more! But as I say download mode, and ARM9 mode are still working. Any solution for this?
just download the new firmware from samfirmware.com n flash it thru odin as u can go to download mode..n ur phone will be back to life again..
i accidently pressed thanks on ur first post
I can't, I don't have access to recovery mode, it doesn't work!
Explainations
ybregeon said:
I can't, I don't have access to recovery mode, it doesn't work!
Click to expand...
Click to collapse
I mean even when I flash an official rom with Odin, I still have the same problem, I am trying this since three days now and noway...
i think you tried to upgrade firmware not boot whenever you upgrade firmware it cant be downgrade it can just be more upgraded when you downgrade your firmware it will not boot up it will just show a black screen so just reinstall the firmware again and do not try to downgrade it
Ok i put my device into download mode with picture then flashed my i9000 with http://forum.xda-developers.com/show....php?t=1160580
i now know this was the wrong FW for my device since then i cannot boot my phone normally nor get into download mode with the picture
it works fine just if i pull battery or turn off the phone
all i get is a black screen with "home & back buttons lit up"
however when i attach my device to odine it recognizes the phone first time
i dont have to do anything, i've tried flashing stock FW
same result black screen buttons lit up no DL mode with pic no boot
i've tried flashing FW with sbl success odine tells me,
no luck again, also when i try to flash 3 files
it always hangs then fails on modem, however if i flash allinone it works
but only boots with odine & not on its own & without samsung boot image
i can flash modem on its own via psa tab with success, i've also tried the jig to get into normal DL mode, but to no avail
also when i plug usb cable in & take out battery phone turns off
its like the usb is not a power source, ive tried on my laptop, ac adapter & pc all same result
to summerise:
i can flash my phone however if i turn off device i it will not boot
on its own & have to reflash via odine but with no boot logo only sounds
im thinking the only solution is samsung service centre but i can hazard a guess the price of a new mobo will prob be the same as the phone its self secondhand on ebay
any ideas? thanks
P.S when i flash 2 or more files i use pit 512, what if i didnt use a pit or used a different one would it make a difference?
P.P.S kies does recognize device once its flashed but cant find any updates on FW
would doing an emergency restore with an .sbu file fix this boot issue?
& where could i get an .sbu file from as i didnt do a backup
Did you also check “repartition“ in odin when you flash with the pit file?
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
In fact if you can't go into DL mode you can use a thing called JIG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Unbrickable mod will fix it.
liraindon said:
Did you also check “repartition“ in odin when you flash with the pit file?
Click to expand...
Click to collapse
odine automatically clicks re-partition when i check a pit file
ansonscleung said:
In fact if you can't go into DL mode you can use a thing called JTAG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Click to expand...
Click to collapse
is this not similar to a jig?
rax22 said:
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
Click to expand...
Click to collapse
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
stevo-p said:
is this not similar to a jig?
Click to expand...
Click to collapse
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
does anyone have a basic .sbu file with no data on that i could use with kies?
would it work?
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
You're correct, guy. A JIG cost about HK$15.5 ($15 for a Micro USB port and $0.5 resistor) (approx. US$1.99 €1.5 not incl. transportation fee) or spend US$8 here.
Hope you can pass through those stuff and enjoy back your phone!
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
already tried jig, no affect, also i cannot getinto recovery mode also
im assuming im already in download mode as odine recognizes my phone
but i have no pic on phone
Unbrickable mod will fix it.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
rax22 said:
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
Click to expand...
Click to collapse
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
woolf clubs said:
Unbrickable mod will fix it.
Click to expand...
Click to collapse
i've researched that method, i know little about soldering
and asked in a phone shop & they knew nothing about it
so i wouldn't attempt it as i would probably screw it up
stevo-p said:
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
Click to expand...
Click to collapse
also i just re-flashed with darky rom same as before "boot loop with pic & welcome to darkyrom 10.2 extreme edition" so turned off phone
thinking great i finally got a pic on boot......no
turned phone on no pic no sound black screen with buttons lit up
nothing else
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
UPDATE*
i've flashed my phone with
PIT: 512
PDA: PDA_XWJVZ_Sbl.tar
PHONE: PHONE_XXJVT.tar
CSC: CSC_OXXJV9.tar
KERNEL: Semaphore_kernel_JVT_1.8.0.tar
I now have the download mode pic so im thinking great
color is abit off but atleast i had the startup samsung logo
fantastic just turned off phone rebooted it
back to square one, black screen bottom 2 buttons lit up?
Fallen04 said:
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
yes multiple stock fw's all work until i turn off device
then try turn on black screen 2 buttons lit up
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?
dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.
dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).
Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this
Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app
Why will it be hardbricked if the custom roms are based on s5830i stock roms?
But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium
Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .
Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app