I did an Odin wipe and now the touch isnt working on my phone!! What do I DO!? Its stock so it goes straight to MTP transfer instead of debugging and I cant change it. PLEASE HELP.
What do you mean the touch? Give more details
Alright, well I was having problems with dig11fs rom so I decided I wanted to install serendepity 5.0. I plug in my phone, run odin and go into download mode. Once in download mode I press start and it goes through and does the factory reset of my phone. My phone turns on and the "swipe screen to unlock" screen comes up. I try to swipe it and nothing. I try going back to download mode and maybe running odin again. Not working. I try different things but overall my touch screen isnt working at all. I went to recovery and deleted user and cache thinking maybe something will work. Phone boots back up and still nothing. I can't do anything cuz I cant get to usb debugging without being able to use the touchscreen.
I just did a master clear with odin and still my touch screen isnt responding! The buttons are working fine but the touch screen is not.
This is a new one.
Pull battery or for a couple minutes. Then try again
what is the build of your phone, located under battery, something like 1008
I think you are in store for a jig
It says 10.08 on the white sticker under my battery.
Have you used odin before, what its the name of the odin file you used?
I have used odin a few times before. Not a problem. I tried the battery pull, nothing.
I used the newest odin "I897UCJF6-final-OCD-REV0.zip" I just downloaded it about an hour ago.
Good news is that you are on stock, so if need be call at&t and file warranty claim. You said matter clear went through correct/
Have you had problems with three button combo in the past?
Do you know what a jig is?
I can get to download mode no problem with the 3 button method. Thats not the problem and I have ideas of what a jig is but if it can help me right at this moment i would appreciate the information.
You can still.get into dl mode?
Have you tried odin flash more then once
Bleepm said:
I can get to download mode no problem with the 3 button method. Thats not the problem and I have ideas of what a jig is but if it can help me right at this moment i would appreciate the information.
Click to expand...
Click to collapse
A jig wont help, if you can get to download mode you don't need a jig. this sounds like a bad flash, try flashing stock again.
Yes I can get into dl mode and I tried twice so far.
I actually have a charger in my house that will disable the touch screen. I once made the mistake of trying to flash using CWM while my phone was plugged up to that charger and when everything booted back up my touch screen was disabled completely. I was able to Odin back to stock and reflash everything.
Bleepm said:
Yes I can get into dl mode and I tried twice so far.
Click to expand...
Click to collapse
Go find the post for the Stock rom with the 3 button fix and the ODIN that is not one click and use that. the one click downloader does strange things sometimes. READ THE INSTRUCTIONS IN THAT POST COMPLETELY BEFORE FLASHING.
This one.
1. Download ODIN and the PIT file and extract it somewhere.
2. Download the PDA file and put it in the directory where you extracted ODIN and PIT to.
3. open ODIN and click the PIT button and choose the PIT file that came with it.
4. click on the PDA Button and choose the PDA.tar that you downloaded from the post.
5. power off your phone completely.
6.Hold down vol up and vol down and plug in the cable.
7. Click start.
So i tried using a different charger, nothing. I'm trying to run the not one click odin.
rpicaso said:
Go find the post for the Stock rom with the 3 button fix and the ODIN that is not one click and use that. the one click downloader does strange things sometimes. READ THE INSTRUCTIONS IN THAT POST COMPLETELY BEFORE FLASHING.
This one.
1. Download ODIN and the PIT file and extract it somewhere.
2. Download the PDA file and put it in the directory where you extracted ODIN and PIT to.
3. open ODIN and click the PIT button and choose the PIT file that came with it.
4. click on the PDA Button and choose the PDA.tar that you downloaded from the post.
5. power off your phone completely.
6.Hold down vol up and vol down and plug in the cable.
7. Click start.
Click to expand...
Click to collapse
That worked!! Except i did the JH2 becaues that was the first one I saw. Wow I am SO relieved.
Related
Got an at&t tab here, I upgraded to JM6, flashed the modem, and rooted it, all was well, untill I realized that I couldnt get into recovery to wipe. So I went into d/l mode, and couldnt get out, loaded up Odin3 and attempted to flash the bell modem again just to get it to reboot. Well it froze up, and now all I get is a communication error picture: "phone ----- !-----PC"
Help please, its brand new and going to be sold
From my experience you can power off the unit, put it in dl mode again flash the Bell modem with no partion, no pit and with reboot selected and it should do a regular startup!
Sent from my GT-P1000 using Tapatalk
I lost d/l mode. But somehow the second time I attempted to flash JM6 with odin, while seeing this error message, it worked. So its working again.
But I have no recovery anymore is this normal?
UPDATE. Seems after JM6 I have no recovery and no bootanimation(have sound). I get a black screen with a thin vertical line on the right side of the screen. Any advice would be great
The phone --!-- computer problem is solvable.
Power off your phone, and power it back on with holding the volume down button, when you see the --!-- sign release the buttons.
You are now in download mode, although you cant see the little android with the shovel. Connect it to a pc with an odin 1.7 open and you will be able to reflash it.
When I got the error picture: "phone ----- !-----PC" after messing with JM6, I just reflashed it at that screen with the full JM6 package. I dont think you can downgrade from JM6...
I just flash pit file at the phone ----- !-----PC screen then when it reboots it will boot loop. Turn it off then hold vol down and power then when the screen turns on let go of power button but still hold vol down. That will get you in download mode. You can downgrade form JM6 but you have to try 3 to 6 times before it will work. JM6 to jj4 then at&t rom is how I do it.
shep211 said:
I just flash pit file at the phone ----- !-----PC screen then when it reboots it will boot loop. Turn it off then hold vol down and power then when the screen turns on let go of power button but still hold vol down. That will get you in download mode. You can downgrade form JM6 but you have to try 3 to 6 times before it will work. JM6 to jj4 then at&t rom is how I do it.
Click to expand...
Click to collapse
You can downgrade ? Make your guide a bit better please so we can all use it.
shep211 said:
I just flash pit file at the phone ----- !-----PC screen then when it reboots it will boot loop. Turn it off then hold vol down and power then when the screen turns on let go of power button but still hold vol down. That will get you in download mode. You can downgrade form JM6 but you have to try 3 to 6 times before it will work. JM6 to jj4 then at&t rom is how I do it.
Click to expand...
Click to collapse
Interesting that you claim you can get back to JJ4 from JM6. All i get is boot.bin error so id like ro know how you did it?
Sent from my GT-P1000 using XDA App
Cmon guys, read the thread. I got the error fixed, now I have no recovery or boot animation.
Does the tab boot up at all? if it does you can try and do a factory reset from settings and see if that clears it up. You will loose all your settings and third party apps but this seems to be a requirement after flashing
Sent from my GT-P1000 using Tapatalk
Tab boots up fine, everything works, I just have no recovery or bootanimation, the sound plays for the bootani, just no picture.
MotoMudder77 said:
Cmon guys, read the thread. I got the error fixed, now I have no recovery or boot animation.
Click to expand...
Click to collapse
You need to tell us what filename you flashed and what .pit file if any you partitioned with.
It sounds like you flashed P1000OXAJM6.tar without partitioning which is probably not going to work.
Never put the phone into download mode unless you have a file ready to flash.
Flashing the file in my sig will probably fix your Tab.
rotohammer said:
You need to tell us what filename you flashed and what .pit file if any you partitioned with.
It sounds like you flashed P1000OXAJM6.tar without partitioning which is probably not going to work.
Never put the phone into download mode unless you have a file ready to flash.
Flashing the file in my sig will probably fix your Tab.
Click to expand...
Click to collapse
I followed the instructions in the OP of the JM6 thread, and flashed the files that I was linked to in the OP. I checked the box to partition. After I flashed the bell modem as I am on At&t. Then I rooted via SuperoneClickv1.5.5.
Now I have no recovery or boot animation.
I was already d/ling your file to check if that fixes anything.
Ok I tried your(rotohammer) file, and still no luck, it did save me from the root proccess tho.
adb reboot recovery, and adb devices will show the device is in recovery, but I have a backlit screen with a thin line down the right side of it. Which is the same thing I see during boot, after the at&t image.
At startup I will see this screen untill I press the lock button twice, first time shuts the screen off, and second unlocks as normal.
MotoMudder77 said:
Cmon guys, read the thread. I got the error fixed, now I have no recovery or boot animation.
Click to expand...
Click to collapse
I answered your problem yesterday and you didnt pay attention to it i guess.
This Video say it all....! http://www.youtube.com/watch?v=nmpWC73pig4
ive seen the screen you are talking about i messed up and flashed the pda file in the wrong place, what i did though is flashed the Stock ATT firmware in the pda section didn't select partition and this file seemed to re-flash everything there is a thread here in the forum, it should be on the first or second page
better yet here is the link http://files.deodexed.com/ModADroid-Galaxy-Tablet/T-Mobile/ATT_Stock.zip
I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
mloc33 said:
I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
Click to expand...
Click to collapse
This procedure will get you back to stock JPU ROM via Odin and Download Mode.
http://forum.xda-developers.com/showpost.php?p=10449932&postcount=7
Then once your phone is working again you can go ahead and flash to a custom ROM which I'm guessing you know how to do. Let me know!
Ok dude I`m doing it now, fingers kriss crossed!!!
Ok this happened....
I took usb out, restarted pc, then phone went into recovery mode, I did a factory/data wipe, same with cache, was about to restart phone, now there`s a white box with an orange arrow comming out of it and a little green android man?
I pressed menu button, it brought up recovery, I restarted, went passed the white logo screen to swirling S logo screen, also played music, now at black screen....
Still in black screen but every 20 or so seconds it vibrates once then 3 quick times???
After sometimes it is required to do a factory reset to get it working.If your flash was succesfull try to factory reset it in recovery mode.
Tried Odin again and got the same error, so when I get into recovery mode I should factory reset everything?
Tried to get back into recovery from download mode and got the bricked screen!!! Its hopeless now is`nt it
I can still get into download mode.....
I dont really get what you are trying to do.
Can you get in recovery mode and do a factory reset???
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Hmm i had that screen many times but always able to flash with Odin.Are you sure you got the drivers on your pc?Make sure that you havent Kies running,on try or in backround,or any other program that is used to connect your phone.Also its always good to use a free USB port on your pc,and by saying free i also mean that it not one of the front panel USB cuz those ones sometimes are shared.
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
mloc33 said:
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Click to expand...
Click to collapse
Modem = phone
gtg2 said:
Modem = phone
Click to expand...
Click to collapse
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
JJEgan said:
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
Click to expand...
Click to collapse
Yes
No
Yes
tackygr said:
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
Click to expand...
Click to collapse
Repartition was checked, should I put the modem one in the phone section?
2. Open Odin AS the Man said .
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
I`m still getting a FAIL on it.
I download that Odin, reinstalled the Samsung drivers and disabled anything related to the phone.
I tried it even without the sim car and sd card in cause I read one post that had tried it and it worked.
From the instructions it looks like I`m using 3 of the 4 files download, remember that modem one.
I definitely have to use that same file twice for PDA and phone?
I followed these instructions to the letter...
file:///C:/Users/Colm/Desktop/xda-developers%20-%20View%20Single%20Post%20-%20[Q]%20i9000%20can%20not%20boot.htm
I`m not sure which one is the right Odin to use, but I tried the both of them and still the same results.
There both v1.30, the gt-p1000 is the one from the previous post..
I`m even trying different USB ports...
Ya fuppin BEAUTY, I did it, I put into the phone section in Odin that modem file and here`s what I got...
NoW I have fireware 2.2.1
Baseband jpu
Kernel 2.6.32.9
[email protected] #1
Build
Froyo.xxjpu
Is this the new froyo?
Will I be able to go back to Darky`s 8.0?
Would this also mean I`ve 3E instead of 2E?
Is this the new froyo?
Says Froyo
Will I be able to go back to Darky`s 8.0?
On your own head be it all i have done for a week is answer borked post all using this rom .
Would this also mean I`ve 3E instead of 2E?
Probably flash via Odin you will need to search i dont have a link .
CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
Its probably on Darkys front page as is Clockwork .
Install sd card update zip CWM twice to get to 2e .
jje
Ok first of all I want to thank the 2 of ya`s for all your help, I really appreciate it!!!
Now that I`m up and going for some reason my pc does`nt see my phone even tough it says I`m connected on my phone?
I restarted my pc, reconnected phone nothing...
If its not one problem its another...
I followed instructions on a link via the cyanogenmod website, to try and get cm7 on my phone. The instructions were on a wiki website which I now know is not reliable!
I got to the stage "flashing cyanagonmod" to find out that the zip files had to be in the internal sd card BEFORE starting the whole process!
I can still access download mode and recovery. But my phone gets stuck on the "Samsung galaxy i9000" intro screen.
I tried restoring and factory reset but still no joy...
any help is very appreciated!
Download some odin flashable ROM, and flash that in download mode.
where do I find an odin ROM and how do I know which one to use?
corrected: samfirmware.com
If you want a custom rom, then look through here however your going to have to read which is odin flashable...
This is a guide and rom i have used myself. Click here
BTW this is obviously assuming you are on SGS I9000 the second link should be quite clear...
here's a nice link to finding stock firmwares and using Odin:
http://forum.xda-developers.com/showthread.php?t=1102881
Talon26 said:
samsungfirmware.com
If you want a custom rom, then look through here however your going to have to read which is odin flashable...
This is a guide and rom i have used myself. Click here
BTW this is obviously assuming you are on SGS I9000 the second link should be quite clear...
Click to expand...
Click to collapse
Thanks for your post. Only problem is ODin doesn't recognise when my phone is plugged in? i.e. there isn't that yellow box showing...help!
Ok so im guessing your trying the 3 button combo for download mode (vol up + home + power). Alternatives to force download is a homemade jig, which is easily obtainable from ebay for a relatively cheap price. Other ways you can try is holding the combo for as long as you can, some have reported it may even work after 3 mins. Another method is hold the combo and then whilst holding it insert the battery. Also the last method but have the usb plugged into with odin open, then put the battery in. Many many ways... just search
Is that what you mean or that you CAN get to download mode and Odin and the computer does NOT recognise when you plug it in. If this is try re-installing the drivers using kies, its under the tools menu. Try a different version of odin, plug phone in then try the combo (with battery already in, then without). Have you closed all Kies applications background processes? (use task manager in windows). Use another computer..
Also have you read this
Edit: Forgot to add, can you get into Recovery? Then use your nandroid backup which you should always do before flashing.. If you dont have a back up try use ADB to force download mode "adb reboot download"
Need to know what options you have available in-order to help, what can you do? Is there any response from your phone with pressing buttons or key combinations??
Ok i put my device into download mode with picture then flashed my i9000 with http://forum.xda-developers.com/show....php?t=1160580
i now know this was the wrong FW for my device since then i cannot boot my phone normally nor get into download mode with the picture
it works fine just if i pull battery or turn off the phone
all i get is a black screen with "home & back buttons lit up"
however when i attach my device to odine it recognizes the phone first time
i dont have to do anything, i've tried flashing stock FW
same result black screen buttons lit up no DL mode with pic no boot
i've tried flashing FW with sbl success odine tells me,
no luck again, also when i try to flash 3 files
it always hangs then fails on modem, however if i flash allinone it works
but only boots with odine & not on its own & without samsung boot image
i can flash modem on its own via psa tab with success, i've also tried the jig to get into normal DL mode, but to no avail
also when i plug usb cable in & take out battery phone turns off
its like the usb is not a power source, ive tried on my laptop, ac adapter & pc all same result
to summerise:
i can flash my phone however if i turn off device i it will not boot
on its own & have to reflash via odine but with no boot logo only sounds
im thinking the only solution is samsung service centre but i can hazard a guess the price of a new mobo will prob be the same as the phone its self secondhand on ebay
any ideas? thanks
P.S when i flash 2 or more files i use pit 512, what if i didnt use a pit or used a different one would it make a difference?
P.P.S kies does recognize device once its flashed but cant find any updates on FW
would doing an emergency restore with an .sbu file fix this boot issue?
& where could i get an .sbu file from as i didnt do a backup
Did you also check “repartition“ in odin when you flash with the pit file?
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
In fact if you can't go into DL mode you can use a thing called JIG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Unbrickable mod will fix it.
liraindon said:
Did you also check “repartition“ in odin when you flash with the pit file?
Click to expand...
Click to collapse
odine automatically clicks re-partition when i check a pit file
ansonscleung said:
In fact if you can't go into DL mode you can use a thing called JTAG repair.
you'll need a 300K resistor (which exactly 301K) and a micro-USB plug.
http://mobile-devices-phones.factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
It works for me!
Click to expand...
Click to collapse
is this not similar to a jig?
rax22 said:
It sounds like you've toasted the bootloader flashing a wrong firmware. But since you can get Odin connected and flash you might be able to recover.
You'll need to flash a stock firmware with bootloaders, Darky RE should have bootloaders. Follow the instructions on the page.
Good luck
Click to expand...
Click to collapse
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
stevo-p said:
is this not similar to a jig?
Click to expand...
Click to collapse
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
does anyone have a basic .sbu file with no data on that i could use with kies?
would it work?
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
You're correct, guy. A JIG cost about HK$15.5 ($15 for a Micro USB port and $0.5 resistor) (approx. US$1.99 €1.5 not incl. transportation fee) or spend US$8 here.
Hope you can pass through those stuff and enjoy back your phone!
clarkey15 said:
What ansonscleung linked to is a Jig, Jtag is something completely different all together. If Odin won't recover your phone, I can't guarantee the jig will work. Although it will help getting to download mode and maybe help flashing the proper firmware.
If you can boot into recovery "home + vol up + power", wipe data, and cache and reboot. Might fix it
Click to expand...
Click to collapse
already tried jig, no affect, also i cannot getinto recovery mode also
im assuming im already in download mode as odine recognizes my phone
but i have no pic on phone
Unbrickable mod will fix it.
stevo-p said:
ok followed all instructions flashed phone now phone still wont boot gets caught up in a loop keeps saying "welcome to darkyrom 10.2 extreme edition" thats after i powered down device
Click to expand...
Click to collapse
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
rax22 said:
Do you get the Galaxy S logo when the phone is turned on? If you do then your bootloaders are now OK and you can boot into recovery and flash a CWM ROM.
Click to expand...
Click to collapse
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
woolf clubs said:
Unbrickable mod will fix it.
Click to expand...
Click to collapse
i've researched that method, i know little about soldering
and asked in a phone shop & they knew nothing about it
so i wouldn't attempt it as i would probably screw it up
stevo-p said:
does my phone have to be rooted to use a cwm rom?
as i never rooted my device
Click to expand...
Click to collapse
also i just re-flashed with darky rom same as before "boot loop with pic & welcome to darkyrom 10.2 extreme edition" so turned off phone
thinking great i finally got a pic on boot......no
turned phone on no pic no sound black screen with buttons lit up
nothing else
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
UPDATE*
i've flashed my phone with
PIT: 512
PDA: PDA_XWJVZ_Sbl.tar
PHONE: PHONE_XXJVT.tar
CSC: CSC_OXXJV9.tar
KERNEL: Semaphore_kernel_JVT_1.8.0.tar
I now have the download mode pic so im thinking great
color is abit off but atleast i had the startup samsung logo
fantastic just turned off phone rebooted it
back to square one, black screen bottom 2 buttons lit up?
Fallen04 said:
Have you tried installing stock firmware with re-partition?
http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
yes multiple stock fw's all work until i turn off device
then try turn on black screen 2 buttons lit up
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.