Hello everyone.
I have just flashed the Darky's 9.0 ROM on my Galaxy S.
At the first boot, the device stuck at the Nexus S animation screen and vibrate every 1~2 minutes but cannot enter the home screen.
I would like to ask what should I do next? I have tried to re-flash the ROM but it seems doesn't help at all.
i didnt know darky had released his 9.0 ROM yet, last i heard about that it was still in BETA mode as it contains bugs and things.. Anyway Can you get into download mode. Volume up + home + Power button ?? if so i would just flash back to stock ROM and go for a different ROM maybe darkys 8.1 or below..
EDIT : Just seen darky has released 9.0 ignore me ive only just noticed...
You should ask Darky about his rom problems .
Or as the previous post wipe it off your phone .
jje
azzledazzle said:
i didnt know darky had released his 9.0 ROM yet, last i heard about that it was still in BETA mode as it contains bugs and things.. Anyway Can you get into download mode. Volume up + home + Power button ?? if so i would just flash back to stock ROM and go for a different ROM maybe darkys 8.1 or below..
EDIT : Just seen darky has released 9.0 ignore me ive only just noticed...
Click to expand...
Click to collapse
Thanks for your reply.
I would also like to know what is the first boot normally looks like? Is it like my situation that keep "looping" the animation screen?
I flash the ROM again and I don't know whether to wait it or not.
well usually first boot can take up to 20mins in some cases, but reading through his threads few people are having trouble.. i am going to use his 9.0 ROM myself but i will be waiting another week or so till i know its running at 100%.
Also, what ROM did you have before ? if your so persistent on having it i recommend re flashing to stock ROM, install darkys 8.1 / 2, choose voodoo kernel, then upgrade to 9.0..
Thats just what i would do, if it goes pear shaped thats not down to me..
azzledazzle said:
well usually first boot can take up to 20mins in some cases, but reading through his threads few people are having trouble.. i am going to use his 9.0 ROM myself but i will be waiting another week or so till i know its running at 100%.
Also, what ROM did you have before ? if your so persistent on having it i recommend re flashing to stock ROM, install darkys 8.1 / 2, choose voodoo kernel, then upgrade to 9.0..
Thats just what i would do, if it goes pear shaped thats not down to me..
Click to expand...
Click to collapse
I have the stock ROM in my hand but the problem is that the ROM is not yet put into the phone's internal SD card.
And I cannot enter the system so I don't know how I can copy the files.
Is there any method to move the ROM into SD card for me now?
so your on stock ROM now, and you cant access anything ?? what happens when you plug your phone into pc via usb ??
azzledazzle said:
so your on stock ROM now, and you cant access anything ?? what happens when you plug your phone into pc via usb ??
Click to expand...
Click to collapse
I have downloaded two stock ROM, both in tar format.
But I haven't put the two file into the internal SD card yet.
When I plug in the device. the PC cannot read it.
When I plug in under recovery mode, the PC can read 3 devices in "My Computer" but shows half-transparent color and cannot access them.
But I have just realize that the stock ROM is acompressed with the odin program
Can I install the stock ROM via odin?
you must flash stock via odin
Fix for boot loop
Posted a solution in the main ROM thread, here's the link to the fix
yes u have to do stock ROMS via ODIN, open up ODIN, select pda, find the .tar file (something like JPY_JPY.tar) make sure re-partition is UNchecked, then put the phone in downlode mode. Volume Down + Home Button + Power Button, that should bring up a yellow screen, then connect the phone to the pc. Make sure Kies is closed ( even in icon tray) the ODIN should see the phone ( something like COM 8 READY) press start and wait for the pass screen on ODIN.
Related
ok I have a problem:
I got started on my Mums phone..
opened up odin
grabbed the wrong file - I was supposed to select 'Aries_P-SBL..yaddayadda' (I wanted to get 3 button recovery working.. I accidently selected the speedmod kernel file..
it then rebooted & never got past the first screen with the samsung name & phone model on it.
started to panic.. tried repeatedly to get into recovery.. nothing.. tried to put the Aries file on.. failed.. tried *heaps of times to get into recovery again.. nothing.. tried to put the Aries file on.. success!!! I can now get into recovery!
BUT
it still doesnt go any further than the very first screen with the samsung name & phone model.. basically, I'm quite certain that all I have to do is some how get darkys v7.0 on there & I'm set.. how do I do that seeing as I cant get the phone to boot into its OS, thus I cannot transfer the file across like I did with mine when it was connected to the pc?
cannot get phone to act as dumb storage device
CWM working, check - when I boot into recovery I can see CWM related things (& fiddle with settings RE: to it) - I can also see the speedmod things & fiddle with settings...
I grabbed an mSD card, chucked Darkys v7 on it, put it in phone... cant seem to direct it to it.. it cant 'see' the ex.sd card while in recovery.. I made an attempt to mount the ex.sd (or so I thought) but no go
the adb program sees it, so does odin..
http://forum.xda-developers.com/showthread.php?t=712433
ok so followed the instructions.. a command window popped up, stayed a while, then, just before it dissappeared, text came up - dunno what it said.. the file isnt on there tho. I attempted this with the phone in recovery mode
yeah, I can get it into d/l mode..
rather not put anything stock on there atm.. I've got a bad feeling about doing that
I can have the phone in 3 diff states:
recovery mode
download mode
sitting on the very 1st screen with the samsung name & phone model displaying..
on my first attempt @ pushing the file onto the phone, I put it into recovery (is there a nice, non-confusing way to abbreviate 'recovery'?) mode - & it didnt work.. I just tried d/l mode.. the command window popped up, but only came up for a split second - too fast for it to transfer the ~190MB file.. I'll check, but I doubt it...
edit: na, didnt take
sorry for the 'copy & paste' job from another forum.. any ideas on what to do?
no one?
Umm, your post is a little unclear, but I'll try and help.
As long as you have download mode, you should be fine to flash any stock rom with odin. Why are you scared to flash a stock rom? It's very strange
You probably should select repartition in odin and flash a middle package firmware (ie. as richothen often provides, or any eclair firmware afaik).
Then if you want a custom rom, flash CWM or any kernel with CWM recovery, and flash the rom.
Pretty simple...
essentially, all I want to do is transfer darkys vs7 onto the phone, but I cant do it the usual way (which is thru windows & when the phone itself is in its os)
the phone wont boot into its os - its stuck @ the very first screen - I can only get into recovery mode & download mode
so how do I tranfer a file?
tiro_uspsss said:
essentially, all I want to do is transfer darkys vs7 onto the phone, but I cant do it the usual way (which is thru windows & when the phone itself is in its os)
the phone wont boot into its os - its stuck @ the very first screen - I can only get into recovery mode & download mode
so how do I tranfer a file?
Click to expand...
Click to collapse
you could flash a stock rom and then start from the begin and do everything again?
I dont think I can flash any rom - I would need to transfer the rom file onto the internal sd, which I cant do
I need to know how to transfer a rom file (preferably darkys vs7) onto the internal sd, using either recovery mode or download mode, as the phone will not boot into os (it hangs @ very first screen)
alternatively, how do I get rid of either CMW or speedmod? or both?
better yet, how do I get the phone to boot into os?
surely someone has an answer?
tiro_uspsss said:
I dont think I can flash any rom - I would need to transfer the rom file onto the internal sd, which I cant do
I need to know how to transfer a rom file (preferably darkys vs7) onto the internal sd, using either recovery mode or download mode, as the phone will not boot into os (it hangs @ very first screen)
Click to expand...
Click to collapse
Download a stock rom reboot into download mode then fire up odin and flash then once the phone boots up you can transfer darkys rom
EDIT: samfirmware.com and download XXJPY flash PDA no pit untick repartition
Sent from my GT-I9000 using Tapatalk
Sorry for double post something went wrong and it posted twice :s
Caskast said:
Download a stock rom reboot into download mode then fire up odin and flash then once the phone boots up you can transfer darkys rom
EDIT: samfirmware.com and download XXJPY flash PDA no pit untick repartition
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
didnt work..
in fact.. I've made it worse.. I can no longer go into recovery mode.. & the phone no longer displays the first normal screen - it displays the phone-!-pc thingy
ok I reflashed the 3 button fix on & the speedmod.. now I'm back to where I was before
can someone please please help me with this?
its been like this for almost 3 days
Get to download mode, flash a stock rom through odin, (whatever you had before the whole mess), then start over. Make sure you have all the correct settings when flashing with odin, using the right pit file etc etc.
nwsk said:
Get to download mode, flash a stock rom through odin, (whatever you had before the whole mess), then start over. Make sure you have all the correct settings when flashing with odin, using the right pit file etc etc.
Click to expand...
Click to collapse
yep just did that:
mild progress..
did the flashing..
no longer hangs @ the first screen.. instead, it gets past it, plays the samsung 'S' tune & clip.. then shows the S for a while longer.. then goes to a blank screen, which is where it stays, occassionally vibrating as well... thats it, thats all it does
Thats the symptoms of a bad/incorrect flash .
Flash again with all the correct settings and files .
jje
tiro_uspsss said:
yep just did that:
mild progress..
did the flashing..
no longer hangs @ the first screen.. instead, it gets past it, plays the samsung 'S' tune & clip.. then shows the S for a while longer.. then goes to a blank screen, which is where it stays, occassionally vibrating as well... thats it, thats all it does
Click to expand...
Click to collapse
Try this. This is legendary unbrick me ROM from Eugene. Flash it with Odin in PDA only and Pit from the package.
http://rapidshare.com/files/439942035/EUGENE373_SamsungS_Froyo_PDA.rar
HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks
roni2915 said:
HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks
Click to expand...
Click to collapse
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.
gee2012 said:
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.
Click to expand...
Click to collapse
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
There are threads about reviving recovery i think on xda, haven`t needed them so far but look around and you will find them. If you can`t restore recovery or downloadmode then it`s off to the shop i guess
Does Odin recognize your phone, what exactly goes wrong when flashing with Odin?
roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
i have the same situation like you before ...try this ..http://forum.xda-developers.com/showthread.php?t=1667886 i works for me..hope it works for you too...
"Battery Too Low, Can't Download"
Now there's another problem.
Not only I Can't flash anything, I can't even get to Download Mode because the battery is low.
When I press the Vol Down + Power + Home key, I get "Low Battery, Can't Download" in red font.
I left my phone on charge through the AC port and I had no idea it wouldn't charge. The only thing was that my phone was exteremly hot but still with zero battery. I even tried plugging the phone through the USB cable but still no luck.
I removed battery for few minutes upto 30 mins and put it back in and plugged in the charger but all I see is the empty battery symbol keeps flashing every 5 seconds.
Is there any way I can charge my battery and get back to download mode so I could try flashing the stock kernel to get past the boot screen? I even tried plugging in the USB jig that I used with my SGSII previously, but it was of no use as well.
Please Help!!!
your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck
ac-milan said:
your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck
Click to expand...
Click to collapse
i will probably take it to best buy because i dunt know anyone that owns a note.. only I'm the cool one
hopefully i can charge my battery at best buy and then go on with the process!!
Hey,
I managed to buy an external charger and I was able to go to Download Mode again.
After that I tried to flash stock kernel (stockKernelXXLA4.tar) And Odin said "Pass".
After that I was stuck on the Samsung Galaxy Note GT-N7000 Logo again.
I'm not sure what to do now!!
Please help.
Is there anything else that I could flash?
Even though I flashed a stock kernel, I still see a yellow exclamation mark..
PLEASE HELP, I NEED MY NOTE TO COME BACK TO LIFE!
Sorted this mess out!!!
I flashed "N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar" And the phone now works!!!
Stock kernels didn't do the work for me, but the official ICS release did.
Thanks to all that contributed in the thread.
is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?
antique_sonic said:
is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?
Click to expand...
Click to collapse
it only took me 5-8 minutes...
Hi,
I have Galaxy Note with 4.0.3 rooted already. I tried to installed the Ultimate JB v5.1 from this thread
http://forum.xda-developers.com/showthread.php?t=1970626
Now I am having a problem. The Philz Touch 3 seems working now, but when I am trying to flash the rom. There is absolutely no progress BAR!
After 5-10 minutes the phone reboot itself. Then the JB rom was not installed. It stuck at a screen displays Installing applications.....
It will be like that forever.
and I can't go back to 4.0.3. I did not backup....
It seems like the OLD ICS is still on my phone but I can not enter the system. It says Installing Applications forever. Then if I connect a usb,
I actually can goto Setting, then I see the phone is still on 4.0.3.
Seems like I only partially wiped out the old ICS? I could not see the internalsd from my PC after connect the USB.
I have also formatted EMMC... am I screwed?
Is there a way to save the phone?
Please help.
Many many thanks
Tony
Are you able to go into download mode? If yes then flash a stock ics through pc odin. This should boot up your phone normally
nokiamodeln91 said:
Are you able to go into download mode? If yes then flash a stock ics through pc odin. This should boot up your phone normally
Click to expand...
Click to collapse
Thanks for replying, I think I am able to Reboot Download from Philz Touch 3. I will certainly try that.
Currently it seems like I still have old system remained in my phone but partially. That might be why I could not boot.
I will try that option.
Thanks
Tony
Yes, there is; your phone boots so all is still well. Download odin, and put your phone into download mode (volume up + home + power; pressed at tge sane time it will automagically reboot and only when you see the galaxy note icon you release these buttons. Now also download a stock pre-rooted GINGERBREAD rom and glash this rom via odin, there will be 3 things to flash; csc, phone and if I remember corrrectly also modem. Now just let it boot and you will be safe again. Now you can experiment again....
hom.hom said:
Yes, there is; your phone boots so all is still well. Download odin, and put your phone into download mode (volume up + home + power; pressed at tge sane time it will automagically reboot and only when you see the galaxy note icon you release these buttons. Now also download a stock pre-rooted GINGERBREAD rom and glash this rom via odin, there will be 3 things to flash; csc, phone and if I remember corrrectly also modem. Now just let it boot and you will be safe again. Now you can experiment again....
Click to expand...
Click to collapse
Thank you so much!. I will try that.:good::good:
Tony
Hi everybody,
sorry for posting this outside the mini 2 forum, but appearently that's a developers reserved forum, so I had no rights to post there.
I would like to ask what is the latest stable custom rom developed for mini2, where to find it and possibly an instruction page.
I had good experience with CM on another galaxy before, so I checked on the the CM website first but mini 2 is not listed there
On the other end I saw a long post on the mini2 developers forum saying that CM10 was actually created, but the post is 91 pages long(!), so forgive me if I didn't read it all. Is it working?
I also checked if there was something like an "in evidence" post with instructions for newbies but couldn't see any, maybe I missed it.
Can someone point me to the right page?
thank you for your held
davide
mm in the meantime I screwed things up. I installed gapps and now it only boots in recovery mode...
why? what shall I do?
please help
thank you
davide
ok, now I'm starting to panic.
why does nobody answer, am I doing something wrong with this post?
I reinstalled the stock rom. I first tried using CWM recovery and selecting install zip file from sd card, but it didn't work: it told me BAD regarding the zip file (downloaded from sammobile), then I succeded using odin. by the way which is the correct method?
However it now seems to start, but I get in loops messages from the setupwizard that says the guided configuration has crashed and also from gapps that Google service Framework has crashed (but should gapps be wiped by the rom flash???).
the problem is that the first of the two keeps restarting and crashing so the phone doesn't do anything else then showing this messages.
please help
davide
After you flash Stock ROM via Odin. Remove battery, put it back. Boot into stock recovery - clear user data & cache and reboot. If the same error occurs try deleting /Android directory(old cache) in your sd card.
thank you for your reply, unfortunately it didn't help.
what do you mean by "stock recovery"? the recovery I see, I believe is CWM which I installed before, but I'm not sure.
anyhow from there I wiped user&cache but I had tried this before and removing teh battery didn't make a difference.
I do not have any /Android directory on my SD card.
it's a simple 4GB fat 32 partition with a single file in it (the zip with stock rom I tried to flash before using odin) and nothing else.
by the way, I used odin3 v.1.83 to flash and I selected the file using PDA button,
but I also have "bootloader", "phone" and "csc" options.
what is the difference?
everything I do makes it more dramatic!
I tried reapeating the whole procedure once again, and odin crashed while flashing teh rom. now it doesn't even boot in download mode, it simply asys to connect kies in recovery mode. but kies never saw my phone in spite of driveres reinstallation, and it is of course not seeing it now!!
yukdav said:
everything I do makes it more dramatic!
I tried reapeating the whole procedure once again, and odin crashed while flashing teh rom. now it doesn't even boot in download mode, it simply asys to connect kies in recovery mode. but kies never saw my phone in spite of driveres reinstallation, and it is of course not seeing it now!!
Click to expand...
Click to collapse
you should terminate kies before using odin. You can kill it in task manager, because kies intereferes with ODIN.
You should'nt be concerned with bootloader and the other options. As long as ur downloaded stock has tar.md5 extension you just place it in the PDA section and select Auto reboot and F. Reset time only.
Also You should only disconnect when it says PASS otherwise u will brick ur phone.
When u success fully flash ur stock rom, the chance is it will not get to homescreen
So u remove battery, reinsert it, press and hold HOME button together with POWER button, the phone boots into stock recovery, you choose wipe data and cache, then reboot. (chemicalrage explained this)
If it ain't booting into download mode u should go to service centre.
PS: My advice is to stay away from custom roms until samsung releases jelly bean for mini 2, then better custom roms will be released.
I write here to help me solve a problem with the mini s3 after turning not spend 30 seconds when powered down or rebooted ...
I did full wipes and reset from recovery and nothing .. I did the * 2767 * 3588 # either .. by odin I did a wipeI8190.md5 and nothing .. the cel turns back on as your last finished reboot .. in fact if I make a modification before they shut down or restart the phone back and not assumes the change .. and the USB debugging is not activated
I wonder if anyone happened to this and can help me.. the warranty is lost
thanks
First thing is to see if stock firmware in odin can help.
tys0n said:
First thing is to see if stock firmware in odin can help.
Click to expand...
Click to collapse
Yes is stock firmware.. theres no modificartion...
could manage to keep it active and enter the ram and select delete but when spend time the phone restart again, in fact delete all applications and messages and when I hes restart put everything back like used to be... and alsdo did the reset factory default and nothing hes restart over again with the same phone profile
flash http://megafiles.me/s/param_i8190-tar-md5 with Odin and reboot
JackoMJ said:
flash param_i8190-tar-md5 with Odin and reboot
Click to expand...
Click to collapse
also did that and still boot with the same configuration..
I'll make a video and I will upload to youtube
it seems is related to a material issue. i thought it's on your power button !
redomix said:
it seems is related to a material issue. i thought it's on your power button !
Click to expand...
Click to collapse
i dont think so.. i will post 2 videos showin the problem
here's the videos
is in spanish but i think is tunderstandable
youtube.com/watch?v=EZhKPInC5r4
and the second
youtube.com/watch?v=hT8e6T0ymJo
if you see in the last part of the second video i did the factory reset and the phone restart without nothing happend
i think you should flash TWRP or clockworkmod, make a backup of your files also the present rom,
After that, flash with a new rom like Cyanogenmod 10.2 from Maclaw and revert with the difference, maybe the problem will be fixed..
redomix said:
i think you should flash TWRP or clockworkmod, make a backup of your files also the present rom,
After that, flash with a new rom like Cyanogenmod 10.2 from Maclaw and revert with the difference, maybe the problem will be fixed..
Click to expand...
Click to collapse
i can not flash becouse the phone not assumes any changes.. with odin i flash in the PDA a recovery.img a CWM and nothing.. even im update from chache/fota upadte of recovery and he gave me this error...
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
i think the problem that the phone no assumes anything with flashing is because is before hes broke or whatever happend to this F%$& is the USB debugging is not marked.. but i dont really now :S
try first flashing TWRP recovery.. can really help.. !
redomix said:
try first flashing TWRP recovery.. can really help.. !
Click to expand...
Click to collapse
can i do that without USB debbugin?
how can i see a tuto or something... im really new in this.. please...
you can do it with your android recovery, mount you internal or external sdcard with android recovery, download TWRP with zip format. and flash it within your android recovery with install.zip.
You can search on Youtube for tutorials.
redomix said:
you can do it with your android recovery, mount you internal or external sdcard with android recovery, download TWRP with zip format. and flash it within your android recovery with install.zip.
You can search on Youtube for tutorials.
Click to expand...
Click to collapse
men you see the videos? i cant put the USB debbugin mode plus everytime then i flash anything on the phone when he reboot the phone no make any change. still the same like you see in the 2 videos that i post on the other messages..
thanks for trying to help.. :good:
Hey Brother,
Very Welcome, yes i've seen the videos, try to mount the internal sdcard with android recovery and copy the twrp recovery, or use another phone and copy the twrp file onto external SD Card, there's an option on recovery called update.zip flash with it,
if there's no change at all, try to flash it with ODIN.. if it don't recognize due to absence of USB Debugging, there's a tool called Samsung GS3 Mini ToolKit. maybe can help you. if not try with samsung KIES .. if also nothing helped you at this point, search around the internet for your problem, maybe you can find some useful help..
Cordially, I.R.
redomix said:
Hey Brother,
Very Welcome, yes i've seen the videos, try to mount the internal sdcard with android recovery and copy the twrp recovery, or use another phone and copy the twrp file onto external SD Card, there's an option on recovery called update.zip flash with it,
if there's no change at all, try to flash it with ODIN.. if it don't recognize due to absence of USB Debugging, there's a tool called Samsung GS3 Mini ToolKit. maybe can help you. if not try with samsung KIES .. if also nothing helped you at this point, search around the internet for your problem, maybe you can find some useful help..
Cordially, I.R.
Click to expand...
Click to collapse
hey men.. take a look at thsi image
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
this is what happend when i do the update.zip..
im searching all over the internet and anybody has put som help.. in fact this is the 3rd forum that i put this problem...
thanks again..
foxdie99 said:
hey men.. take a look at thsi image
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
this is what happend when i do the update.zip..
im searching all over the internet and anybody has put som help.. in fact this is the 3rd forum that i put this problem...
thanks again..
Click to expand...
Click to collapse
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
PTGamer said:
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
Click to expand...
Click to collapse
Good tutorial bro, this is the same what i'm talking about.. it should work with these method.. waiting your reply.
PTGamer said:
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
Click to expand...
Click to collapse
well men let me tell you the phone laguh hes ass off to maclaw TWPR hes reboot like before.. hes no assumes anychange... im little impress with this little piece of S%&T...
thanks for the tuto but dont work for me right now
i think is a service from google.. NLplocationreceiver. thats is the only one who`s dont start.. and keeps searchin
foxdie99 said:
well men let me tell you the phone laguh hes ass off to maclaw TWPR hes reboot like before.. hes no assumes anychange... im little impress with this little piece of S%&T...
thanks for the tuto but dont work for me right now
i think is a service from google.. NLplocationreceiver. thats is the only one who`s dont start.. and keeps searchin
Click to expand...
Click to collapse
thats strange at least for me that worked...
meybe you have a faulty memory?