Database Develop

How do you use clockworkmod rom manager?

I have a Mytouch 3G running test 7 on my phone, and i just installed the clockworkmod rom manger. After, installed it i wanted to flash a new rom, so flashed the clockwork mod recovery, and when i tried to install the new rom from the sd card, it keeps on getting stuck on the mytouch screen, and nothing happens. How do i get into the recovery screen? thanks

First: This belongs in Q & A !!!!111
Which ROM did you flash? Maybe you had to wipe before

right now, i'm running cyanogen test-7, but when i go into the clockworkmod rom manger app and pick the flash rom from sd card, it just says it has to go to the recovery, and then my phone will reset and it would just get stuck on the mytouch screen. So, i just pull out the battery and reset the phone again, and i realized if i press the end button, it will go the rom that is already on the phone. I'm i suppose to push some buttons or something to get to the recovery screen?

No it should flash the rom you select and reboot the phone to boot the new rom without keypress needed.
maybe the wrong device was selected when downloading the recovery image? Try reinstalling clockworkmod recovery from rom manager.

Mod edit: not dev related, moved to q&a

I have the same problem.
I downloaded and installed Rom Manager from the Market and it has completely screwed up my recovery (I can't get into it at all). I tried flashing Amon's again (through Rom Manager) and it still doesn't work.
HTC G1. CM5.07 test 7 (trying to go to stable!).

Your recovery has been corrupted, you will need to flash it through fastboot.

JAguirre1231 said:
Your recovery has been corrupted, you will need to flash it through fastboot.
Click to expand...
Click to collapse
Yes thank you. I erased recovery partition in fastboot then reflashed Amon's.
Working now.

i got into the fastboot screen, but i have 4 options. hboot mode, reset device, restart to hboot, and power down. how do i flash from here?

illmatic282 said:
i got into the fastboot screen, but i have 4 options. hboot mode, reset device, restart to hboot, and power down. how do i flash from here?
Click to expand...
Click to collapse
Connect to your PC via USB, and from the command line issue "fastboot erase recovery" and then "fastboot flash recovery filename.img"
More on common fastboot commands here can be found on these forums, i'm not allowed to post links.

i connected my phone to my computer but nothing on my computer pops up. only the new hardware wizzard pops up. what do i do from here? im i suppose to get a adb popup? how do i set up the fast boot? i'm so confused..thanks

some one, please help..i want to be able to flash new roms in the future...thanks in advance

Can I sugges that you try this sticky thread at the top of this forum board.
It contains all you need to know on who to set up fastboot and how to use it - there are a couple of tutorials on it if you read through the thread.

CM 5.0.7 for Dream/Sapphire introduced a bug in flash_image. It causes recovery flashes to fail. It has since been fixed in the latest test of 5.0.8 I believe.

Man i have the same darn bug cant get back into recovery for nothing, and i dont have a pc to fastboot i have a non intel based mac so no adb or fastbooting, i have been doing fine for forever without adb or fastboot but is there any way around this one, i need help bad, im on HTTClay Superbadv1.3 and it has all sorts of bugs but i cant nandroid or bart or flash any rom without recovery, can someone please help!!!
Also is there another way to erase the recovery partition?

phone semi bricked

ok the phone is not bricked an i know there is only one way to brick a hero blah blah blah. but i have psfmod recovery flashed to my phone and i was trying to do the firats mtd partition thing. so i did everything it said and when it came time to do adb shell,reboot recovery it wouldnt work. so after about 5 minutes i realized that the computer wasnt recognizing my phone. i guess cause of the psfmod recovery. and i had already wiped everything. so i wiped everything again and flash zenaraia rom back on. but after rebooting it just stays at the white HTC screen. waited for an hour. i tried wiping and reflashing like 20 times. and i cant mount the sdcard to put another rom on there since the computer wont recognize my phone. anybody following me? lol any suggestions?

It seems like you might need to RUU... have you tried doing that?

cp0020 said:
ok the phone is not bricked an i know there is only one way to brick a hero blah blah blah.
Click to expand...
Click to collapse
Haha I came here just to possibly rip on the OP when I read the title but saw you already mentioned it :/ So you put it in your thread title anyway?
As the guy said before, try running the RUU - should be able to be done in the bootloader.
OR if you can boot up into a rom (wasn't too sure judging by what I read) just get a Dropbox, throw a rom.zip on it, get the app for the phone, sync and bam. New rom.zip on your phone to try.
If neither one can be done, you need to find another phone, camera, sdmount...something so you can add files to it. Even if its just a HERCIMG.zip to update via the bootloader (look up s-off if you don't know what that's about)
Good luck

thanks for your help guys. i'll try the RUU but i dont think it will work since my computer wont recognize my phone while in bootloader. im pretty sure it's just the psfmod recovery that f'd everything up. and yeah i cant boot into a rom. im hoping that somehow my rom.zip just got messed up somehow.

ok yeah RUU didnt work. my only other option is to find a laptop or something

Try getting a live Fedora or Ubuntu linux cd (or any flavor for that matter) and booting it up.

what would that do? i went back to the psfreedom thread and i saw that adb and usb mass storage does not work with that recovery. i should have read better lol

Same thing happenned to my evo..i kept tryna flash the wrong kernel wit nym rom..all i did wuss flashed the rom without da kernel and walla...it started workin again..thnx god..idk if dis would help but it worked for me..
Sent from my PC36100 using XDA App

ok i got it to work. i was talking to nfinitfx45 on google talk and he said to boot up in fastboot and then plug the phone into the computer and then i can run the RUU and it worked like a charm now i just gotta re root :/

cp0020 said:
ok i got it to work. i was talking to nfinitfx45 on google talk and he said to boot up in fastboot and then plug the phone into the computer and then i can run the RUU and it worked like a charm now i just gotta re root :/
Click to expand...
Click to collapse
yay !!! im just quoting this because this bears repeating...
1 - if recovery is not working, go into fastboot to get pc to recognize phone...
2 - if roms (recovery or whatnot) are not working, reflash to RUU to start fresh...
(and adding)
3 - once youve started fresh, then flash a working-recovery and go back to your latest [nandroid] backup...
(you always have a good backup to use, right ?) h.

I think all you had to do was flash a different recovery from terminal if you were able to boot up the reason y I didn't use that mod was the fact you can't use adb wen u flash that recovery in that post I think the op posted the link to the old recovery that allowed you to use adb good luck
Root-Hack-Mod-Always™

that was the problem. i couldnt boot to a rom cause i had erased all data and my rom.zip had got corrupted somehow. and with that recovery you couldnt do adb or usb mass storage. so i started freaking out lol. thanks again nfinite

So I'm having a similar problem. I can use ADB to reboot my phone, so I know the computer is talking to the phone but it wont get past the HTC screen. I was trying the firerat mod and made it to the reboot as well but it never came back up. If I reboot to recovery its a white screen with the android on the skate board but the only option is to clear user data and then reboot again which goes back to the HTC screen. I tried the RUU but it wont install because it says my phone doesnt have enough battery (it's been charging on and off for the better part of 24 hours now.) Any assistance or advice would be greatly appreciated.

first, can you use usb mass storage? if so the you need to put a rom on your sdcard and flash it and see if that fixed it. and if you want to RUU. then pull the battery and put it back. then hold volume up and power at the same time. then hit the button it says to to go into fastboot. you should already be in fastboot though. and then while in fastboot plug the phone into the pc and you may have to install drivers. and then you can run the RUU.

I'm not exactly sure what happened but i got it working. I ran "adb reboot-bootloader" from the menu that brought up i was able to get back to the clockwork recovery, restore my nandroid and finish the mod. all appears to have worked beautifully except that last night my battery went completely dead over night (for the first time) although i'm doubting that that has anything to do with any of this

[Q] Interesting boot loop problem.

2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?

hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?

bradels said:
2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?
Click to expand...
Click to collapse
myrobelle said:
hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?
Click to expand...
Click to collapse
Thats too bad guys,and i m sorry to hear that news.I would like to havean answer but i dont...
The fact is that since most people in this forum use some custom roms,and all of us think the same,that we can always go back,so it would be great if you give some more details about what happened to you,and mybe why it went wrong,and it would be even better if one of the BIG guys would give some explanation about this...
I already thinking of not updating my rom anymore,dot want to end up in looping too,so lets see if someone will find something.Good luck guys..
By the way,i didnt get it right,CWM recovery cannot load your backup????

I just got an idea,but not sure if or how it would work or not.
Since you can push file with ADB,if soeone made a clean backup with his CWM (o e mail,contacts,setting saved) and send it to you,so that you log in with CWM recovery and flash that ???
Just an idea..maybe stupid dont know...

Its not very clear if youve tried this already but cant you just boot into recovery through adb? or does that not work either?

[Q] urgent helped needed please

I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?

Bricked means it is a brick and that is it, your phone still turns on so the good news is that it is not bricked.
Need some more info before anyone can help:
1. You reformatted everything using clockwork recovery
2. Did you re-install a new ROM?
3. Did you restore a nandroid backup?
I would recommend booting into recovery and wiping everything (factory reset and dalvik-cache) in recovery, then reinstall froyo - once you are booted and running you can figure out what you want to put on it. At least your phone would work then.

stonemad said:
I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?
Click to expand...
Click to collapse
Just what Heaterz16 said...
I'm also pretty sure your phone isn't bricked, as long as you can still get into Recovery, it Most Likely can be Fixed!
I also Recommend trying to Wipe Everything, then Reinstalling a New Rom, Also as a Suggestion... If it were me I'd Probably Choose a Different ROM to install! My Very First ROM I Flashed was a Cyanogen one, and I had Trouble with it Booting Also!!
Try LiquidSense... its Only 2.1, but its Stable, It Boots Fast, and just plain out Fast as Hell!
You can always Switch to Whatever you want... Once you get your phone back to a Working Condition!
Good Luck!
Sent from my HERO200 using XDA App

I cannot get it into recovery now. It will turn on, but it stops at the initial HTC screen, and stays there until the battery dies. When I connect my phone with my computer, the computer recognizes it, but I can't seem to get the 2.1 exe from HTC.com download to the phone. My guess is I wiped the thing clean. Unfortuneately, I didn't back anything up.

I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.

Can you adb into the phone and flash a recovery?
I think that would be a helpful start.

stonemad said:
I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.
Click to expand...
Click to collapse
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.

kwahomba said:
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.
Click to expand...
Click to collapse
kwhomba,
he can't get into the recovery.

mtran2988 said:
kwhomba,
he can't get into the recovery.
Click to expand...
Click to collapse
t-y, got it. Yeah, then adb a new recovery image may be the only thing. But he may not even be able to get in then.

Just a matter of waiting right now.
He did say his computer was recognizing his device, so he might be ok.
If he can flash a new recovery, or even just adb.. then he can start rebuilding it.
stonemad:
You'll want to grab a recovery, and try to connect to your phone via ADB when it's on.
Then do adb shell
then : flash_image recover [name of recovery].img
let us know

Ok, I can get to the CWM recovery, there is no backup files, no recovery files, and no files on my sd card. I cannot seem to get an opperating system on. I mounted my phone to my computer and downloaded .zip files, but it still says no files available.

How do I flash a recovery, I can't find any files anywhere.

i have .zip files on my sd card to flash, but when I try to apply them it says no files found.

Ok, I have been working on this all day. Thank you to every body who answered. This is the situation as best as I see it. I can use the power and the down volume buttons to go to recovery mode. I have ClockworkMod 2.5 and can mount my computer to my sd card. It appears that I don't have an opperating system at all, or anything else on the phone. I have downloaded several .zip files and tried to install them, I can mount them, but when I try to apply them it states that there are no update.zip files on the sd card. I have deduced that I need an opperating system for an update to work, but I could be wrong. I am having a hard time finding the right files to use to get my phone to go. It seems salvageable, but I'm not sure how. People have sugested a couple of Mods to instal, but I don't know how to do that with what I have. CWM is asking for a update.zip, or a recovery.zip, but I don't know wich one at which time, or even how to get it to flash. That is what I think I know, but that is subject to change depening on what you all know.(showing just how foolish I really am) Thanks again people for you time and advice, I really do appreciate it.

Don't select "install update.zip", select "install zip from SD card" or whatever the option is called.

I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.

stonemad said:
I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.
Click to expand...
Click to collapse
What software are you talking about? Sprint, Google, and Android what, specifically? A download for what?
Mount usb storage in recovery, put rom of your choice on there, and flash?

what about kernals, how do I know that I have everything I need?

ROMs generally have kernels in the zip builds already. From the sounds of it, you're kind of lost at what you're doing.
Do you have a SD card reader? if so, plug in the SD card to your computer and pull over a ROM zip, like Cyanogenmod or whatever is to your liking.
Then in recovery, go to "install zip from sdcard"
go to "Choose zip from sdcard"
then search for the ROM zip you put on the sd card.
State exactly STEP BY STEP, what you are doing. Your phone is perfectly fine, you just dont have a ROM on your phone, which is why you cant boot. You're not missing kernels, or anything, you simply dont have the baseline of a ROM on your phone yet.
Post back

I don't know where or how to find a rom, I have heard good things about cyanogen, but can't seem to find where to download it. Is ClockworkMod a rom, and if so how do I use it. You're right, I got way in over my head, and now I just want my phone back the way I bought it. What is your favorite rom, and can you give me a link. Thanks again everyone.

[Q] Please help. Get AP Fast Boot Error at reboot

Hi everyone. I have a problem I can't seem to resolve. I tried updating to the OTA jellybean update a couple weeks ago, it seemed to go ok. I then tried to go back to an earlier version of eclipse rom I was using. Now when I power on the phone I get AP Fastboot Flash Mode (S) (Flash Failure). I can select normal boot and it will go into my ICS Rom that I have loaded in slot 1 after going thru my safestrap recovery program. So the phone is not unusable, just very annoying to use. My question is, how can I get the fastboot flash mode flash failure warning to not show up every time I reboot the phone? I've tried loading the Stock JB Rom from verizon, Blur_Version.6.7.246.xt875.verizon.en.us with RSD Lite, but when I try to extract the files with RSD, I get the error "Please check input file. Either XML format is wrong or image files associated with it are missing." I just want to be able to get a stock rom back on my phone, without any errors when I boot it, I don't care if I have root, safestrap, or anything else, I just want a properly working phone. Any suggestions how to get rid of the boot flash failure warning? Thanks!!!! Richard
Update.... Looks like I really screwed it up now. Tried to rsd lite a JB rom, got about 1/2 way, to copying system image, then hung up. Now when I reboot, it won't even go into recovery or normal mode... Stoopid operator malfunction..... Any suggestions on which rom I can try to install via RSD Lite to help get it back going? It will still go into AP fastboot mode.

He's dead, Jim. Nothing is working, no rom will load, they either fail or hang up. Now both of my batteries are dead, and it won't even try to do anything. Any suggestions?? Guess I'm in the market for another phone. Maybe some of the gurus on here have some advice. Thx.

He's alive, Jim!!!!!
rlg999 said:
He's dead, Jim. Nothing is working, no rom will load, they either fail or hang up. Now both of my batteries are dead, and it won't even try to do anything. Any suggestions?? Guess I'm in the market for another phone. Maybe some of the gurus on here have some advice. Thx.
Click to expand...
Click to collapse
Thanks to some other posts on here, http://forum.xda-developers.com/showthread.php?t=2236980 I tried installing the system and preinstall img files manually thru moto fastboot. They seemed to hang up after a few minutes, but I tried to install the files anyway. Afterwards, I was able to get into recovery mode and do a system wipe and reinstall the JB rom that I had on my SD card. Now a couple hours later, I got the pageplus 4g issue fixed again, and just finished rooting it with the tutorial on XDA http://forum.xda-developers.com/showthread.php?t=2256439.
You guys are awesome! Thanks for all your hard work.