Ok, I turned my Nook (rooted 1.01) on yesterday after maybe 2 weeks not using it (was turned off all the time).
I got stuck in the colored n screen and turned it off by presseing power button after it didn't boot after some minutes.
Now it is doing nothing anymore. Blank screen, not booting no answer to anything (longpress or plugging USB)
I read that this might be because due to some reasn system is broken and i tried recovery using a disk with the clockwork image. After inserting the uSD, unfortunately it is also not booting and not responding to any long keypress, with or without power...
BTW1: the Nook cable power indicator is always yellow - its not getting green even if it was plugged in for some time. does that say anything?
BTW2: I am from europe and bought the Nook in the US, but cannot return it from here :-(
Any ideas ?
Any tip on how to find out if it is essentially functional?
Anytool I can use?
Thanks for any idea !
The few things I would probably try from here is holding the power button for 10 seconds wait a bit and try to turn it on. Also turn it "on" where the lights and that come on and let it run till the battery dies, that could take a day or two, and see after some charging if it will start back up.
Good idea - it might be still running with a blank screen...
If I plug in the Nook cable in my PC, it tries to install a driver and a "OMAP360x" device can be seen in Win7 Device Manager. Does this prove that the device is still running ?
btw the Omap entry is just there for some seconds than drops out of the list automatically...
You are getting the same thing like mine.
I fixed though. It is simple.
First make sure you have Clockwork Recovery burned to an uSD then plug the SD card to the nook.
Afterwards have the nook connected to your computer and keep the power button pressed for at least 15 seconds, cause you ought to see the screen go white and black really fast since it will be booting into recovery.
Now that is if you have enough battery. If not it will tell you to go plug it it for at least 15 mintutes to charge. In that case you will need to plug it in the outlet.
Do that and let me know what happens.
Will try this again, today and report.
Thanks!
sammojohn said:
You are getting the same thing like mine.
I fixed though. It is simple.
First make sure you have Clockwork Recovery burned to an uSD then plug the SD card to the nook.
Afterwards have the nook connected to your computer and keep the power button pressed for at least 15 seconds, cause you ought to see the screen go white and black really fast since it will be booting into recovery.
Now that is if you have enough battery. If not it will tell you to go plug it it for at least 15 mintutes to charge. In that case you will need to plug it in the outlet.
Do that and let me know what happens.
Click to expand...
Click to collapse
How do you get the Clockwork Recovery burned to a micro SD? Is there a way to get it directly from the web on a computer?
StillConfused said:
How do you get the Clockwork Recovery burned to a micro SD? Is there a way to get it directly from the web on a computer?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=922870
I am also having the same issue i was able to get recovery up. But when i try to flash it back to normal it says it completed . but once u pull the sd card it still wont boot.
Matmax said:
Ok, I turned my Nook (rooted 1.01) on yesterday after maybe 2 weeks not using it (was turned off all the time).
I got stuck in the colored n screen and turned it off by presseing power button after it didn't boot after some minutes.
Click to expand...
Click to collapse
Okay, so be clear for everyone, how did you root, and are you using the stock recovery or had you installed Clockwork Recovery?
I suspect your battery is just dead, but surely you've plugged it into the B&N charger and cable and left it for a while, right?
Thanks! Looks like this is even able to load up all the apps and stuff?
I will give it a shot, and I suppose I can block the 1.1 too!!
I was using the stock 1.01, I have let the battery charge and i rooted it using auto nooter
Flash my boot repartition zip, found on my froyo on emmc thread. Flash means install through CWR.
Sam
Sent from my HTC Desire using XDA App
did you figure out how to change the charging color from orange to green? i am having the same problem and i havent been able to find a fix
Hi, sam,
I happen to deleted /boot, /system, /data. This boot repartition zip can still save my nook?
thanks
samuelhalff said:
Flash my boot repartition zip, found on my froyo on emmc thread. Flash means install through CWR.
Sam
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
samuelhalff said:
Flash my boot repartition zip, found on my froyo on emmc thread. Flash means install through CWR.
Sam
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Never mind i found it http://forum.xda-developers.com/showthread.php?t=929670
Thanks for the help
is there any way to get the Rom Manager with the drop bucket? I cant get market to work
Related
Need some help trying to figure out how to make my Captivate turn on...I press power and get the AT&T slash screen and then the galaxy s logo loads for about 3 minutes and goes to blank dark screen with the capacitive buttons lit. this is not good because my **** won't boot into recovery either
You should flash to stock then...pull battery, hold volume buttons and plug in usb with odin loaded and ready on the computer. There's plenty of threads to help you out
Sent from my phone so excuse the spelling errors
Funnily enough... My phone just did that too. I was installing Mort Widget and it just totally bricked...
I'm rather p!ssed at this...
Course this was after it deleted all my email accounts and SMS.
What you'll need.
Odin (search or look in any of the ROM/Firmware threads, for example the i9000 ROM or unofficial JH2 or JH3 ROM)
Your USB cable.
The firmware files.
Steps:
Remove battery, SIM card and micro SD card.
Open Odin on the computer.
Put the battery back in.
Plug in the USB cable to the phone.
Hold both volume up and down.
With VOL up/down held in, plug usb cable to the computer.
Your phone will show the beloved DOWNLOADING yellow image.
Odin:
Simply select the rom/firmware you want to flash to and enjoy.
I can confirm this will not overwrite the phone's internal 16gb storage, which is where most apps save backups to.
Future steps:
Before trying anything crazy, copy the entire phone internal 16gb storage to your computer. If you brick, you can always get a new captivate, copy the junk back and run a restore.
I recommend Titanium backup (donate the $6, the backup/restore is SUPER SUPER fast) along with Clockwork recovery. Clockwork's Nandroid makes full kernel backups and you can boot to recovery from the phone itself. No more adb reboot download or adb reboot recovery.
sorry for my english i have a 19000m the one from bell my phone boot with the GALAXY S LOGO WITH THE MUSIC BUT AFTER THAT BLACK SCREEN CAN I REPAIR THAT ?
Yes, odin is about your only hope here... Even if you boot into the bios and try to do a factory reset it will come up with error after error...
Reflashing will totally wipe and start fresh.
I am curious however. I think i isolated where my problem came from but I am still curious...
Did you try to sideload anything?
It happened to me twice with Bell's Vibrant version. The first time, just after one week after getting it (not rooted). They simply gave me a brand new one.
The second one took 3 week to go dead. Knowing my way around Linux Embedded systems, this time I investigated the issue. In recovery mode, there were error messages saying that the system could not fine the internal flash memory partitions. I could confirm from the kernel messages that partitions on internal sdcard had disappeared. I did factory reset, reflash original stock firmware with Odin, but it did nothing.
I Sent the phone back for repair and three weeks later, they gave me another one (probably refurbished!!).
My phone just turns on, with a black screen and the capacitive buttons lit up. Nothing else happens. When I try to go into download mode, it only goes back to this black screen. I does however detect that the phone is connected driver wise on the computer, but does not show up in Hemidall or Odin. I've tried just about everything
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
isa.ahmed said:
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
Click to expand...
Click to collapse
Does it light up or display anything and then go black, or does it just do nothing? If it does nothing, you're probably bricked, but try this anyway just in case your phone still has some life in it:
open Odin; press and hold both volume buttons and plug in your USB. If Odin lights up yellow, flash.
If that doesn't work, buy or build a jig, use it, and see if it goes into download mode. If it doesn't, plug the cable in anyway and see if Odin recognizes it. If it does, flash.
If that doesn't work, you're probably bricked. JTAG or Unbrickable Mod are your options from here, neither of which I personally know anything about but you can search around and find someone who can help you.
Hard Bricked= No signs of life, black screen no matter what, no response to USB plug in. Nothing but Unbrickable mod or JTAG will fix, I WOULD SUGGEST getting Unbrickable because you only have to get it once, and it cost the same as JTAG.
Soft Bricked= DL mode access is available(by jig or button combo and usb), recovery too, has some life in it. Can use ODIN/HEIMDALL to fix it.
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
isa.ahmed said:
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
Click to expand...
Click to collapse
If you got a green light, I would think it should at least turn on. However, if it was a successful flash, it should charge with the phone off. A bricked phone and a bad charger would both look the same: dead.
Try a different charger or battery if you think your battery could that dead. However if your battery died during your flash, that could also be the cause of your brick.
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
isa.ahmed said:
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
Click to expand...
Click to collapse
A jig is worth trying, but I suspect it will not solve your issue. You are correct, you need to send it to someone to have it fixed. Send a PM to AdamOutler or Connexion2005 and they can point you in the right direction.
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
isa.ahmed said:
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
Click to expand...
Click to collapse
You moto defy never flashed boot loaders since Motorola always had them locked down, and if you didn't know what you were doing flashing the stock Emma's that had boot loaders then it is not the phones fault. You should never really have to flash boot loaders and that is the ONLY risky part in flashing on these phones. Other than that Samsung cappys are almost TRUELY unbrickable (HARD BRICK) unless you mess up flashing boot loaders. WHICH YOU DID WHETHER YOU KNEW IT OR NOT BY FLASHING THE STOCK ODIN. SEND IT FOR UNBRICKABLE MOD, it is cheap repair and you WONT run into your same mistake ever again.
Sent from My KickAss CM7 Captivate
so no way i can do it here?
need to send it?to who i send? and who to trust?
i found some one will do for 50$
http://www.mobiletechvideos.com/blog/?page_id=776
Adam Outler
Sent from my SGH-I897 using xda premium
and other issue, i never toch the bootloader of it
i only re flash the OS of it only..and end with black screen.
this gay he will do what?
can the agent do it?
as it will be easer than to send it
can i have link of who will do it
K so like an idiot i deleted framework-res, and now my phone turns on to a black screen. I've tried to reflash it with odin and odin 1 click, but it always gets stuck at "file analysis". I don't get why because I used odin 1 click to install froyo in the first place so I know it works.
Anyway, I have no idea what to do, as I can't get any files on or off my phone because ADP will always say the device is not connected.
if its stuck at file analysis keep fiddling until it goes past that for instance plug in into download mode with it open and then unplug and replug it in. just keep trying.
i've been trying for hours... rebooting.. reinstalling.. everything. it won't get past File Analysis...
Are you trying to use the odin 1click to flash back to jf6? That might work.
Sent from my SAMSUNG-SGH-I897 using XDA App
droidal said:
Are you trying to use the odin 1click to flash back to jf6? That might work.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
nope, still hangs at File Analysis
i have done the same and now back up i used an old odin to go back to original stock and then updated to froyo after. If you can use sdk adb reboot recovery and fromat your sd card then try odin again this worked for me
maybe try restarting computer. make sure you dont have anything adb related running. pull battery. start odin one click. put battery back in. hold vol-up and down at same time(just the vol. buttons no power) plug in usb from comp. to your phone while you still have the vol. buttons held. should be in download mode. click start.
and if you wanna try pushing a new framework, i guess you could try to boot into recovery and adb should see it then as debugging mode is auto on in recovery mode. let us know.
sbtim said:
K so like an idiot i deleted framework-res, and now my phone turns on to a black screen. I've tried to reflash it with odin and odin 1 click, but it always gets stuck at "file analysis". I don't get why because I used odin 1 click to install froyo in the first place so I know it works.
Anyway, I have no idea what to do, as I can't get any files on or off my phone because ADP will always say the device is not connected.
Click to expand...
Click to collapse
Are you using 64 bit Windows 7? I am and had a similar problem. On my original attempts to flash my phone with earlier versions of Cognition, I learned that if you don't disable the lagfix, you can have a problem. Assuming you used one I hope you disabled it. I also used odin 1-click at the time and it didn't work terribly well, mostly due to the voodoo lagfix ext4 filesystem.
Secondly, I've also found that it's best to go into download mode using the following method:
I do a battery pull, remove sim and sdcard (if you have one), put battery back in. Make sure your USB cable is plugged into a USB port on the motherboard, not one of those front USB ports (they sometimes don't get enough juice, you wouldn't want the device to disconnect in the middle of a flash). Hold volume up/down and plug in the USB cable. Odin one click should recognize the phone is hooked up to a COM port. At that point, you click the start button and it flashes. It should not take more than 1-2 minutes to flash. If Odin looks like it it is not working, rather it sits at Verifying or does not actually move at a brisk pace, it's not going to work. You can let it sit for hours and it will never flash. If this happens, do the battery pull and try again. My first time doing this was rather nerve wracking as i thought i bricked my phone. Had the screen with the phone/exclamation mark/computer and the computer did not detect my phone via USB. I've seen people who say reinstalling the Samsung drivers or rebooting the computer or switching USB ports might help as well.
Ever since i figured out the above, i've been able to flash my Captivate on Win 7 64bit without a hitch. Currently running the latest build of Cognition 2.2 and loving it.
I've done all of the above and Odin hangs on Verifying, ADB gives the same error message on every "ADB" command : "error: device offline: (while in recovery mode)
My computer/Odin does recognize that it's plugged in, but it won't mount and let me into the SD card or format it, etc.
edit : fixed
weee
sbtim said:
edit : fixed
weee
Click to expand...
Click to collapse
You should post what you did to fix it in case someone has the same issue
Sent from my SAMSUNG-SGH-I897 using XDA App
Yes he should.
What did you do to fix it? Do tell.
10 bucks says he succeeded once he read the directions properly.
Reading is hard, that is why so few people do it.
Same exact thing happened to to me 2 days ago. All I did was:
1)take the battery and SIM card out, wait a few seconds,
2)run Odin3 on my PC and hookup the USB cable to the phone while still off
3) hold both Volume buttons down while phone is off and connected
3)at the same time, slide in the battery with 1 finger or have someone do it
4)keep volume keys held down as the battery is installed and my phone turned on straight into download mode
5) phone pops up in Odin3 and just click Start, flashed to stock JH6
I am 80% sure I wasn't holding the power button while holding the Vol keys. If that doesn't work above ^^^ hold all 3 buttons and it should go into download mode.
so.. I fubard framework.apk trying to get teh circle battery mod on my phone (it just hung forever and *poof* black screen o' nothing after I pulled the battery)
So.. I'm following the directions but windows keeps finding the phone as some type of crazy serial device and is asking for drivers ... so I'm fux0red methinks.
Any help is appreciated - but I think I did a real number on this thing.
Ok... these are the steps I've done.
Shutdown the device.
Pulled battery, Sim, SD Card.
Popped the battery back in.... didn't power it up.
Turned on Odin3
Popped the USB cable into the phone while holding both volume buttons.
I get the lil triangle.
... then I get a windows message stating "SERIAL GADGET" and the XP wizard comes up looking for drivers. It doesnt find anything of course.
So.. I rinse and repeat and it can't find the device.
So what am I missing o wise XDA folks?
avgjoegeek said:
Ok... these are the steps I've done.
Shutdown the device.
Pulled battery, Sim, SD Card.
Popped the battery back in.... didn't power it up.
Turned on Odin3
Popped the USB cable into the phone while holding both volume buttons.
I get the lil triangle.
... then I get a windows message stating "SERIAL GADGET" and the XP wizard comes up looking for drivers. It doesnt find anything of course.
So.. I rinse and repeat and it can't find the device.
So what am I missing o wise XDA folks?
Click to expand...
Click to collapse
Have you searched for the drivers and installed them on your xp machine?
I'm still a noob so I'm not sure of it will help.
Please though, once you get it sorted please post your solution here for the benefit of those whip comer after you.
Good luck!
Sent from my SAMSUNG-SGH-I897 using XDA App
http://forum.xda-developers.com/showthread.php?t=788093
Get the right drivers if you havent already and find the USB port that works. Post 8 above is very good. On my netbook, only one of the three usb ports works for the captivate, i've marked it since with a happy face.
Ok.. at home now on my Win7 machine - all is good in Odin restore land...
Except - I flash using the Odin 1 Click and still boot to a black screen.
I think because I had the Voodoo lagfix on it - it won't format correctly and load the rest of the ROM onto the SDCard
I have searched everywhere and cannot find any answers. I tried to load a custom rom lastnight and my phone got stuck on the white HTC screeen. I was able to go into HBOOT but everytime i tried to rebot nothing would hapen. I loaded the PH39IMG.zip but it said the file could not be read. Now my phone wont turn on normally or into HBOOT. When I plug it in the orange light flashes and goes out. The only response I get is the haptic on the 4 lower keys.
Did you flash the boot image before you flashed the ROM?
Sent from my Transformer TF101 using Tapatalk
not sure. I made the mistake of using ROM Manager from the market. i downloaded the rom i wanted to the external sd and went into the app, selected "install from sd card", selected the rom and it instantly came up with the white HTC scren. i gave it about 30 min before pulling the battery and loading HBOOT. from there i couldnt do anything so i went to bed. when i woke up i was able to enter HBOOT and got the message "battery low". i plugged it in and the light flashed orange. now nothing. just feedback when i touch the 4 bottom keys. i put a CWM and the zip back on sd card but cant get into HBOOT to flash it...
PluggedLlama said:
not sure. I made the mistake of using ROM Manager from the market. i downloaded the rom i wanted to the external sd and went into the app, selected "install from sd card", selected the rom and it instantly came up with the white HTC scren. i gave it about 30 min before pulling the battery and loading HBOOT. from there i couldnt do anything so i went to bed. when i woke up i was able to enter HBOOT and got the message "battery low". i plugged it in and the light flashed orange. now nothing. just feedback when i touch the 4 bottom keys. i put a CWM and the zip back on sd card but cant get into HBOOT to flash it...
Click to expand...
Click to collapse
I be love you have flash an incorrect cwm and or kernel. Chexkbout the super guide and revert to stock and start again .
Drew
Sent from my HTC PH39100 using xda premium
thats what i thought also but i cant get it to do anything. i hant get into HBOOT or FASTBOOT. all i get is a black screen
Did you pull your battery before trying to boot into hboot?
Did you relock your phone before trying to flash the PH39IMG?
yes. it just doesnt want to enter. i just left the battery out for 20 min and it finally went to hboot. it asked if i would like to go into recovery, i said yes. it said updating then update sucessful and asked to reboot. did that, white htc screen for 5 min then it turned off like it died again. How would i "re-lock" if i can manage to get back to hboot? and is there a reason my battery wont charge? also can i enter it without the battery and being connected to charger? Thanks for all the help guys
yay. i got into CWM!!! now can i install a custom ROM?
PluggedLlama said:
yay. i got into CWM!!! now can i install a custom ROM?
Click to expand...
Click to collapse
Fastboot fast proper kernel and then yes.
the only thing i can get loaded at this time is CWM. where do i go from here? im sorry, i thought i had this all figured out but to be honest it turns out i have no idea what im doing.
PluggedLlama said:
the only thing i can get loaded at this time is CWM. where do i go from here? im sorry, i thought i had this all figured out but to be honest it turns out i have no idea what im doing.
Click to expand...
Click to collapse
You can start by reading the link below:
http://forum.xda-developers.com/showthread.php?t=1416836
Sent from my HTC PH39100 using xda premium
PluggedLlama said:
yes. it just doesnt want to enter. i just left the battery out for 20 min and it finally went to hboot. it asked if i would like to go into recovery, i said yes. it said updating then update sucessful and asked to reboot. did that, white htc screen for 5 min then it turned off like it died again. How would i "re-lock" if i can manage to get back to hboot? and is there a reason my battery wont charge? also can i enter it without the battery and being connected to charger? Thanks for all the help guys
Click to expand...
Click to collapse
Heres exactly what your gonna do. Follow this step by step.
Pull your battery.
Put battery back in.
Turn on phone by holding vol down + power.
Plug in USB cable.
Enter fastboot.
In your adb folder (where you have the fastboot.exe, ect.) in cmd type: fastboot oem lock
(Not using your phone) Put the PH39IMG on your SD card
Pull your battery.
Put battery back in.
Turn on phone by holding vol down + power.
(Plug into the wall charger if your battery is low)
It should automatically detect and flash the PH39IMG.
Now your back to stock.
Now READ EVERY SINGLE WORD in this and then this.
After this if you still have no idea what to do - Don't pass go. Don't collect $100 You're done.
i try to enter fastboot but it goes to CWM based revovery v5.5.0.4. how can i get to HBOOT from here? and when i was there earlier it wouldnt install from sd because the battery was too low
It shouldn't go to recovery if your trying to boot into hboot. Either your doing something wrong, the phone is plugged in before you boot into hboot (if you plug your phone in while its off it'll automatically boot to CWM Recovery), or you seriously messed something up (beyond where I can help you).
well i WAS able t get into HBOOT fine until i got the message "change a battery" now i have to be plugged in to even get CWM. will the battery charge in cwm? my led flashes orange for about 2-3sec and then goes out..
It should. Chargemon file isn't correct hence why we don't have the standard charging screen IIRC.
PluggedLlama said:
well i WAS able t get into HBOOT fine until i got the message "change a battery" now i have to be plugged in to even get CWM. will the battery charge in cwm? my led flashes orange for about 2-3sec and then goes out..
Click to expand...
Click to collapse
Yes, it charges in CWM.
Once it's charged enough, try to adb reboot bootloader when plugged into the computer and see if it kicks you to HBoot. I forget whether you can launch ADB commands from CWM or not.
EDIT: Or just do the standard HBoot button combo.
ok, ill let it charge for a bit and try the PH36IMG. i really hope this works. i just got this phone thursday!
well the screen timed out so i assumed i would try to get to Hboot. i cant get to hboot. it will only go to CWM. can i install the .zip from here or does it need to be installed from hboot?
PluggedLlama said:
well the screen timed out so i assumed i would try to get to Hboot. i cant get to hboot. it will only go to CWM. can i install the .zip from here or does it need to be installed from hboot?
Click to expand...
Click to collapse
Are you plugged in while trying to get to hboot? If it's plugged in it will always go to CWM for some reason. There is no reason why your phone will boot to recovery and not hboot.
Sent from my Transformer TF101 using Tapatalk
Not sure how I did it, but I am stuck at the Red LG logo with the white LG letters and my phone will go no further. It will not shut down without a battery pull. I have tried to do the hold down volume and factory reset the phone, same screen pops back up. Plugged in does nothing either. It is like it lost the ability to boot.
I ask here for maybe some guidance from a dev. If wrong place, please move it.
I can not get into the recovery, regular boot, computer to recognize it.. Nothing at all... Is there an actual boot image to put on the sd card to boot to?
Any suggestions??
eghill1125 said:
Not sure how I did it, but I am stuck at the Red LG logo with the white LG letters and my phone will go no further. It will not shut down without a battery pull. I have tried to do the hold down volume and factory reset the phone, same screen pops back up. Plugged in does nothing either. It is like it lost the ability to boot.
I ask here for maybe some guidance from a dev. If wrong place, please move it.
I can not get into the recovery, regular boot, computer to recognize it.. Nothing at all... Is there an actual boot image to put on the sd card to boot to?
Any suggestions??
Click to expand...
Click to collapse
What did you do right before this point?
I think my mistake was going into Rom Manager to see if I had anything showing clockwork installed. Phone restarted and i was at this point since. Not sure if I told it to update a clockwork or not. Head is fried now from messing with it..
eghill1125 said:
I think my mistake was going into Rom Manager to see if I had anything showing clockwork installed. Phone restarted and i was at this point since. Not sure if I told it to update a clockwork or not. Head is fried now from messing with it..
Click to expand...
Click to collapse
Ok, I can get you fixed but I can just about promise you that you will be in test mode,
I don't own this phone (almost did) but curious, how Wood you fix that? Does LG have a tool like rsd lite (moto) or odin4 (sammy) ?
Sent from my DROID RAZR using Tapatalk
Try this: http://forum.xda-developers.com/showthread.php?t=1337386
I looked at that thread, but I can't see how I would go about that when I can not get anything on the phone beside the LG logo. I can't plug it in and select internet connection or install any software drivers from the phone on the first line. I have called Verizon and they are sending me out another phone, but I would like to get this one fixed if I can..
eghill1125 said:
I looked at that thread, but I can't see how I would go about that when I can not get anything on the phone beside the LG logo. I can't plug it in and select internet connection or install any software drivers from the phone on the first line. I have called Verizon and they are sending me out another phone, but I would like to get this one fixed if I can..
Click to expand...
Click to collapse
You can get into emergency mode to flash the tot file in lgnspt.
1 Pull Battery
2 Press and hold volume up + power
3 Plug phone into computer (while still holding buttons)
4 Put battery back in (while still holding buttons)
5 You should now enter emergency mode
Can u enter CWM? By holding down pwer and vol down. Then confirm data wipe (it won't) then reboot into cwm? If u can try to install a rom
Sent from my ADR6425LVW using xda premium
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to General
Title says it all. Woke up and the phone would not turn on (thought it was SOD). I pulled the battery and rebooted, but it would just stick on the Att boot logo. Tried full wipe/cache/dalvik but not avail. Odin'd back to stock and seemed to work, but realized that everything was installed to the external sd and the internal would not mount. The computer would not read the internal either. At this point, I honestly do not really care to go through a lot of troubleshooting to fix it. If anyone wants to mess with it, use it for parts, etc., let me know. I also have about 3 spare batteries, one of which is a 3200mAh. That being said, if anyone has some simple ideas let me know. My thought is that the internal sd is shot.
I'm gonna take a wild guess . .
you were on an ICS rom and you got the Encryption Unsuccessful message? if you search for EU bug, you will find several tgreads ob the topic.
'about 3 batteries' ?
wow, not exactly 3, eh
sent by the scare crow, tin man, and cowardly lion on the yellow brickfree cm10.1 road.
Was on slim (4.2.2) and did not receive any error. It was completely unexpected. As to the number of batteries, I enjoy camping/backpacking and need multiple batteries when out for more than a couple of days. I honestly don't know how many I have because they are scattered across camping bags, briefcases, etc. No telling how many I actually have.
Sent from my SAMSUNG-SGH-I727 using xda premium
jb 4.2 has emmc and usb storage swappable. what happens if you remove the external sd and boot into recovery?
sent by the scare crow, tin man, and cowardly lion on the yellow brickfree cm10.1 road.
Well, I lost cwm when I odined back to stock trying to fix the issue. Through this process I seem to have lost the ability to get into download mode using the three button combo. I'll try to jig it tonight and see if I can install can. If so, I'll report back with my results. Thanks guys.
Sent from my A500 using xda app-developers app
jsingle3 said:
Well, I lost cwm when I odined back to stock trying to fix the issue. Through this process I seem to have lost the ability to get into download mode using the three button combo. I'll try to jig it tonight and see if I can install can. If so, I'll report back with my results. Thanks guys.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
Download mode is Vol down+power. Recovery, vol up+down+power.
BWolf56 said:
Download mode is Vol down+power. Recovery, vol up+down+power.
Click to expand...
Click to collapse
Yea, I'm aware of that. Just not thinking when I was typing. I got it into download mode with a homemade jig. Can't get odin to recognize it on any of my computers at home (no matter what cable I use). Was able to get heimdall to recognize it on one of my usb ports. Tried one of the oneclick packages from AdamOutler. Everything looks like it installs correctly. Phone reboots, shows att screen, boot animation, galaxy S logo, then the screen goes black. If I press the hard keys, they light up, but nothing shows up on the screen (even if I press power button). At least it looks like information is being uploaded to my internal sd (external is removed). Where to go from here......
jsingle3 said:
Yea, I'm aware of that. Just not thinking when I was typing. I got it into download mode with a homemade jig. Can't get odin to recognize it on any of my computers at home (no matter what cable I use). Was able to get heimdall to recognize it on one of my usb ports. Tried one of the oneclick packages from AdamOutler. Everything looks like it installs correctly. Phone reboots, shows att screen, boot animation, galaxy S logo, then the screen goes black. If I press the hard keys, they light up, but nothing shows up on the screen (even if I press power button). At least it looks like information is being uploaded to my internal sd (external is removed). Where to go from here......
Click to expand...
Click to collapse
Use Odin/Heimdall from this post: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Btw, Odin won't work on same usb port as Heimdall as it installs it's own drivers.
Tried the heimdall one click. No errors in flash. After the flash, it reboots into recovery and gives me the error "failed to mount /sdcard (No such file or directory)". If I reboot, I just get stuck in a boot loop.
jsingle3 said:
Tried the heimdall one click. No errors in flash. After the flash, it reboots into recovery and gives me the error "failed to mount /sdcard (No such file or directory)". If I reboot, I just get stuck in a boot loop.
Click to expand...
Click to collapse
Do you have a external sd in your phone? If so, remove it and try again.
BWolf56 said:
Do you have a external sd in your phone? If so, remove it and try again.
Click to expand...
Click to collapse
It was removed when I tried it last time (i.e., I tried to flash with the external installed and without). I am pretty sure that the internal sd is shot. I had a problem with some block errors a few months ago and believe that they finally got the best of me. A buddy of mine runs a mobile device repair shop and is going to take a look for me. I will report back.