Noobish custom ROM questions - Galaxy S I9000 Q&A, Help & Troubleshooting

I've yet to flash a custom ROM but I do have a custom kernel which has CWM3 (Advanced Voodoo v666.2) and the stock JS3 ROM.
Am I alright to just disable voodoo and flash the custom ROM right from there without any problem?
Secondly, if I'm moving to a custom ROM that is based off of the ROM that I have installed, is a data wipe still necessary and if it is, will I still have the nandroid backups just in case it fails?
Lastly, are all or most of the popular custom ROMs theme-able with any type of theme ment for, say, a JS3-based ROM for instance, is it custom-ROM specific, or does and froyo theme work with any froyo ROM?
Thank you for your advice and help. Sorry if these questions have been asked, I have looked quite a bit before asking.

If you have a 2e kernel & CWM, then you're good to go for flashing. Pretty much every cooked ROM will have instructions that say to disable lagfixes before flashing a new ROM as a precaution.
The first time you flash a flavour of cooked ROM, it's suggested to do the wipe. You might not run into problems without it, but I always backup my sdcard (along with titanium backups) before flashing a new ROM. Have never used nandroid to recover my phone's last good state. Then again with some of the issues I've had with mine, those woulnd't have helped to much anyways!
You'd have to check the theme you want to use to see if it's compatible with the ROM you're about to flash. The big name ROMs and themes usually work.

I'm not sure how to check and see if I have 2e recovery. I recently had to repartition and I went straight to this kernel. I'm not going to assume that this kernel would have 2e as part of the kernel even though it updates CWM.
(edit)The kernel is advanced voodoo v666.1 +2 should that mean that the +2 is the 2e recovery?

If you have voodoo, then you 2e.

If you can load CWM, then for all purposes you have 2e

Ok, I flashed over to Darky's 9.2 with voodoo 5.4.1 along with a custom notification window (the cartoon chick from Jumba) and the green and black market. If I could post screens, I would, but for now, I just want to say thanks.

Related

[Q] KB1-> CWM?

I've browsed and searched around but not having luck, partly, I suspect, due to a lack of knowledge. Also, most of what is out there is for custom roms.
How can I get CWM to work on the Stock KB1 ROM? I have found a method to root, and get it to sideload, but I'm not finding how to get CWM working.
I presume it is 3e or something. Here is what I have tried:
1.) I put the update.zip that I've been using for quite a while on it.
2.) I tried using ROM Manager to set it up
In both cases I get the E:Failure....errors.
This should work I believe
http://forum.xda-developers.com/showthread.php?t=909213
CM7
Gave you a thanks.
I also found it at this thread. Good to go.
Now I just need to be sure I flash CWMs that won't mess up my 2.2. Lot of stuff is for 2.2.1.
What are you looking to flash?
CM7
I've been using Serendipity for quite a while and love . But given enough time, I always end up losing auto rotation functionality. Flash back to stock always fixes it. So, I'm going to try to get KB1 as functional as I can.
I have finally got it rooted; installing non-market apps; and CWM working.
I am about to check on a Dena theme I had used, but expect it to not work, given it was on a 2.2.1 rom. Maybe I'll be surprised.
I also want to get the Circle Batt mod. I expect I can achieve that with the UOT Kitchen.
I have also just applied a Beta Kernel,, so making progress.
Not sure what else I want to flash, but want to be ready with CWM, which I am now.
I Flashed Supersurio's KB1 + Voodoo Kernel. After that I installed CWM using ROM Manager.
If you are looking to get CWM working on 2.2, this seems like the easiest method and you end up getting Voodoo Lagfix as a bonus!

[Q] Make Clockworkmod the default recovery manager

OK, maybe I'm missing it, but with every search I've ran, all I come up with is 3e recovery problem, but I've already gotten past that.
I am running rooted stock 2.2 with the 3e fix. I have CWM installed, and I can get into it by installing the update.zip it created. But I would like to make it my default recovery, is it possible? Or am I dumb and am I just missing it?
Thanks
It has to be baked into the kernel ... Thus you can't make it default on the stock one, you will have to keep the update.zip on your sdcard and reinstall packages twice each time.
Every single custom kernel has it as default, so you can flash a new kernel to do it. If you are on stock 2.2 look for ones that say based on kb1, or you will have to flash another modem as well or call quality will have sound issues. But at that point might as well just pick out a rom, it'll have all that stuff all ready to go. Plus alot of added features and theme options....
Thanks for the heads up

[Q] reached brickwall with themes

hi.
i've had a galaxy i9000 for a few weeks now and today i decided to root the thing so i could try some sick themes.
rooting went fine, it's all done properly (i think...).
i got metamorph and tried to install this theme:
http://forum.xda-developers.com/showthread.php?t=726912
after a bit of persuasion, i got the phone to install it successfully, or so i thought. it asked me to reboot, so i did, but there are no changes to the phone, the default theme is still active.
excuse the bluntness, but what the hell do i need to do to get a theme running? i've spent like 2 hours trawling the net reading about cyanogenmod, nandroid, busybox and metamorph and i'm possibly more confused than when i started.
cheers
The ROM you use needs to be De-Odexed
if you are running a stock ROM, then you will never get a theme installed.
there are many Custom Stock - De-Odexed ROMs out there, if you like the stock feel
You should probably have clockworkmod to install the themes too. You can get this by flashing a custom kernel. E.g speedmod for froyo or CFroot for Gingerbread(make sure you get the right version for your rom) and flash either one with odin, read up before flashing and make sure you have download and recovery modes.
So most themes require:
A deodexed rom
CWM to install the theme
I didnt realise you are on CM7 - its still early and i didnt wake up long ago.
anyway a CM7 ROM will be de-odexed so scrap my last post. I dont know if that version is compatible with your version of CM7, However there is a theme section for CM7 only, and thats in the themes and apps section.
also when i was running CM7 you dont need to flash the theme in recovery. You install it like an .apk and there is a built in theme manager app with CM7 - you look in there for your theme and then hit install
is that what you have been doing ??
-------deleted--------
ok.
well, i'm running froyo firmware v2.2 and kernal v2.6.32.9.
so, what apps exactly do i need from here? i have a rooted phone with superuser, rom manager, metamorph and busybox.
so damn confusing, every page of information i read just clutters me up. there seems to be a sea of different versions of everything that are all incompatible with each other.
all i want to do is install some different themes.
quick bump. so close to knowing what to do, just need someone to quickly explain!
i thought u was running cyanogenMod ??
anyway, is your froyo rom a custom rom ?? if so its as simple as flashing it in recovery
groovestick said:
ok.
well, i'm running froyo firmware v2.2 and kernal v2.6.32.9.
so, what apps exactly do i need from here? i have a rooted phone with superuser, rom manager, metamorph and busybox.
so damn confusing, every page of information i read just clutters me up. there seems to be a sea of different versions of everything that are all incompatible with each other.
all i want to do is install some different themes.
Click to expand...
Click to collapse
My advice:
Install CF root,install clockworkmod recovery,download the theme you want and place it in your internal sd card.Boot in recovery,choose zip from sd card,flash it,reboot ready.
the rom still needs to be de-odexed, if its a stock rom with a custom kernel it still wont work
ok, what the hell is CF?
I DLed the latest CM "nightly" whatever that means for my phone but havent installed it to my phone yet cause im not sure how.
as for being a custom ROM or whatever, the phone is basically stock outta the box apart from being rooted.
thats why themes wont work, your still on stock.
CF root is a kernel, which gives you 2e CWM recovery...
Cyanogen can be a little tricky to install so i would HIGHLY recommend you read the instructions 5 times plus. or get used to flashing simple custom roms first.
I agree, dont mess with cm or miui till you are competent flasher
Sent from gt i9000 insanity 8.5/fugumod
For me GingerReal or Simply Honey have been fairly simple to install. Just folow the instructions to the letter.
Then you can simply can flash any themes from CMW

[Q]Andromeda 3,phoenix unleashed and more..

Here are my doubts: Captivate on 2.2 no root
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
5)Do I need to go back to stock every time I want to flash a different rom?
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
jmtheiss said:
Here are my doubts: Captivate on 2.2 no root (Don't doubt the captivate - it can handle it! Isn't autocorrect great?)
1)Is andromeda3 and phoenix unleashed based on android 2.2 or 2.3?(recent versions)
Andromeda3 is 2.2 based, and as much as I can see, so is Phoenix Unleashed.
2)I used Odin v1.0 to go back to stock,what is the difference betwen Odin 1.0 and Odin 1.7?
They're the same program, just different revisions. I can't say what specifically has changed between the two of the, but my guess would be 1.7 would have more features/bug fixes/etc.
3)Are there any other methods to go back to stock, I have read "Use odin 1.0 in case of emergency"?
Going back to stock will consist of using some version of Odin (one-click or otherwise) to reflash the stock rom to your phone
4)How can I back up my stock rom after root in the case I want to flash back and unroot?
From a rom standpoint, there's no need to back up your stock rom, unless you have settings done a specific way you want. Flashing to stock with automatically put you back at a stock, unrooted state. I would recommend doing a nandroid backup from the CWM recovery menu (assuming you have CWM) and copying the EFS folder to a safe location before moving forwards.
5)Do I need to go back to stock every time I want to flash a different rom?
Need to? No. Is it a good idea? There's debate on this, but in general, it's not a bad idea to flash back to stock (relative to where you are - GB/Froyo/Eclair) before flashing a new rom. It will help keep things tidy.
6)Andromeda3 has a ursa minor kernel do i need this to install there rom or can i just flash the rom without ursa minor?
To the best of my knowledge, it is included in the rom - there's nothing to do on your part, as it will flash with the rom.
7)In the phoenix unleashed thread it says to flash there custom rom use odin to go back to stock,does this mean i have to do the whole back to stock+root again?(Staring from scratch in other words)
If you're still on stock Eclair, you do not need to go back to stock. If you're on something else, you will need to go back to stock, but you shouldn't have to root, as most roms now work without being rooted.
8)Will flashing rage patch while using andromeda3 or phoenix unleashed mess something up?
It won't hurt anything - it just covers a security flaw.
I think that's all please put the same number of the question in front of the answer so I know witch answers witch.Thank you in advanced.
Click to expand...
Click to collapse
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom
DudeWatsThat said:
Thank you this is very informative and what i meant by "Here are my doubts: Captivate 2.2 no root" is that my captivate is on stock 2.2 without root just to be clear.
I got one more question:
Whats is the EFS folder?
Im going to tell you my former situation so you can tell me what I did wrong:
I rooted my phone with super one click at the time
I used rom manager it was also supposed to save a backup of my stock rom
Somewhere in the CWM I was supposed to save the stock rom just in case something went wrong(i thought i did it correctly)
I flashed Cognition everything was great
I wanted to eliminate Cog when i went to CWM to find my back up of stock it didnt work it stayed in Cog
I have read that flashing other roms while having a custom rom isnt recommended that you need to go back to stock first
I was stuck on Cog all i did was update to the most current version
Till last week where i got the guts to use Odin to flash back to stock with some fear i might brick my phone
Now im looking to do it all over but do it right and not mess it up only with different rom
Click to expand...
Click to collapse
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.
jmtheiss said:
It actually doesn't sound like you did anything wrong - you may just be looking for things in the wrong places. The CWM backup, if I am correct, doesn't create a quick-swappable backup of your stock configuration. My understanding of how the nandroid backup works is that it creates a snapshot of the phone with a particular rom in place, so that if something bad happens, you can flash back to a clean version of that rom, apply the nandroid backup, and you'll be right back in business with your custom rom (Again, that's my understanding - someone more knowledgeable may chime in and give a better/more correct explanation).
If you made a backup using CWM, you should have a folder on your internal SD called "clockworkmod/backup", with a folder that has the date of the backup on it. I would copy that to somewhere safe (like your computer). Once you've done that, and assuming your phone is functioning normally as a phone, I would use a root-level file explorer (root explorer, adb pull command, etc.) to get a copy the folder "/efs" on your computer as well. (Take a look at the link in my signature about XDA terms and acronyms for what the EFS folder is).
Once you've done this, if you haven't already done so, back up your applications with Titanium backup. Then use the Odin one-click to get back to stock 2.1 Eclair. You won't have root access at that point, but that is not a problem. Once you're there, just follow the directions for the rom you want to flash - most will install without requiring the root permissions. The AIO captivate toolbox in the development thread is a good tool if you want something to walk you through the installation process (although it should really only be used on Froyo roms at this point).
PLEASE NOTE - THIS IS EXTREMELY IMPORTANT: If you are going to flash a Gingerbread-based rom (Mosaic, Apex, etc), please read up and follow all directions extremely carefully. Flashing Gingerbread involves flashing the bootloaders on your phone, and if something happens during that portion of the flashing process, you will have a true hard brick - not a clay (recoverable error state), but a phone that you can't use.
Click to expand...
Click to collapse
Thanks again
I don't plan on flashing 2.3 roms until the official 2.3 release come out
Theres a Odin that flashes stock 2.2 instead of 2.1 can I use that one instead?
Theres a Odin that flashes stock 2.2 instead of 2.1
Click to expand...
Click to collapse
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?
jmtheiss said:
I wasn't aware that existed - could you please provide a link?
Just to point you in the right direction, at the end of the flashing you're currently doing, what rom do you want to have on your phone?
Click to expand...
Click to collapse
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.
DudeWatsThat said:
Heres the link http://www.mobiletechvideos.com/blog/?page_id=186
The rom i want to use is either Andromeda3,Phoenix Unleashed or just go back to Cognition 4.5.3 or Cog 5 when its not in Beta.
Click to expand...
Click to collapse
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.
jmtheiss said:
Thanks for the link - good to know about that file.
In my opinion, you would have the best luck going back to stock Eclair (2.1). The reason I say this is because it gives you the cleanest path to getting to the custom Rom you want. 2.1 doesn't have the signed 3e recovery problems that can exist with a 2.2 stock rom, so you'll save yourself a lot of hassle there. Plus, the 2.1 stock rom to custom rom path has been followed hundreds of times on this forum, so it's had the chance to get pretty much all the kinks worked out by this point.
Again, just my opinion.
Click to expand...
Click to collapse
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?
DudeWatsThat said:
I would gladly take your advice if it makes everything safer and easier but I upgraded my phone using Kies mini to 2.2 so will using odin to flash back to stock 2.1 cause any problems since its a downgrade from 2.2 to 2.1?
Click to expand...
Click to collapse
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)
jmtheiss said:
You shouldn't have any problems with the 2.2-2.1 transition if you use the one click Odin back to stock. The dangerous move is going from 2.3 to any other version, as that involves flashing the bootloaders.
For maximum safety, just include these items on your checklist prior to starting:
- Nandroid backup from CWM
- EFS backup (copying that folder to a safe location)
- Titanium backup of your apps (copy titaniumbackup folder to safe place)
- Back up pictures/music/other items you want to save
Once you've done that, use the one-click Odin to get to a clean stock. From there, you should be good to go with flashing a custom rom. Just make sure you read and follow all directions in the custom roms' post. (If there's nothing there, follow this guide.)
Click to expand...
Click to collapse
Eh i got it into download mode and i pressed start on odin but i think its stuck did i have to root first and then use odin im kinda scared right now
Edit:its showing a phone a warning sign and a Pc like connect phone to pc
I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)? It should look similar to the attached file.
jmtheiss said:
I know it's nerve racking, but as long as you weren't on a Gingerbread rom, you'll be ok. Rooting isn't required - Odin is automatically "rooted".
A quick questions while you're waiting - When you plugged it in, did Odin recognize a phone was attached (did a yellow text box show up saying COM:4 or something similar)?
Click to expand...
Click to collapse
Eh yes its i managed to trouble shoot it and its reboting everything is ok and yes it did show a yellow text box as of right now i just need to pop in the sym and reboot i have succesfully flashed 2.1 i just need to root and get CWM thru Room manager correct me if im wrong.
I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.
jmtheiss said:
I'm not that familiar with Rom manager, but the general idea of getting root (maybe through the super one click root application, or from the CWM recovery menu) and installing CWM recovery (however you need to accomplish that) is the right first steps to getting to a custom rom.
Good luck with the flashing process.
Click to expand...
Click to collapse
I just rooted now all I need is CWM and thank you for all your help!
Glad it worked out. Don't be afraid to ask more questions in the future, as a reply to a question you've asked could help someone else with the same question out.
Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.
Miami_Son said:
Everything you asked about could have been answered by doing some searches and reading up on these items. Invest the time instead of just posting.
Click to expand...
Click to collapse
I did ALOT of searching before thinking of posting this,the reason I did it was because most of the post are from 2010 and I had doubts on if I should use those methods or if there where new ones.This is the Q&A sub-forum right?I did just that ask questions.

[Q] Advice for Flashing custom ROMs

I have a friend that want's to flash a custom ROM to his captivate. He has it rooted but hasn't done anything else.
I said I would install CM7 or something on it for him. I had a Droid and Droid2 and am now on a Thunderbolt. So rooting and flashing ROMs aren't new to me. But, as with all three of my phones, things are a little different on the Captivate.
I see there's this Odin thing and I think no permanent clockwork recovery? How do you install ROMs on the Captivate? I see there's a new CW that doesn't need what ever Odin is. He's on the stock kernel and everything. So do I just boot into recovery and flash the clockwork update.zip and then flash normally through CW?
Also, being as he doesn't know how to do any of this, which is the most stable and bugless ROM that everyone uses. He won't know how to flash something else, so I need something that is as close to 100% as possible, speedy, and close to, if not ASOP.
Thanks
Hello,
Please post in Q/A as this is not a development topic. Suggest mod move the post.
I suggest that your buddy do some reading. Are you going to be there to hold his hand every day if something goes wrong with his flash? Tell him to educate himself. And if flashing is not new to you and your 3 phones, you should know what section a question like this goes in, is it "android development" related?
Sent from the frozen tundra known as Canada.
Most stable rom I have ever used is firefly 3.0. But your friend should see u do it and at least know how u did it to his phone. And yes from stock just do the clockwork mod update.zip and then flash through clockwork mod, there is a little more involved in flashing cm7 and it is not the most stable rom anyways. Good luck and I hope u take my advice on firefly you won't be dissapionted
The flashing procedure will vary depending on what ROM you want to run.
CM7/MIUI have their own set of procedures.
Flashing a Froyo based ROM you'll have to flash CWM 2.X then the ROM
Flashing a Gingerbread based ROM you'll have to flash the updated Gingerbread bootloaders first via Odin then flash the Kernel or CWM 3.X or higher, then the ROM.
Post in question section plz
I advice you to start flashing a not complicated rom (2.2) , once you get the hang of it then you go advance.
Moved to proper forum.
Odin is a program that is ran in the computer to flash a rom, bootloaders, and kernel at once. For it to work your phone has to be in download mode. Clockwork works with rom manager in the app store, some roms have it in the kernal.
Sorry, the forums I used before all root related things, including questions, went in the Root section. I thought Q&A was for non-root/development questions.
Thanks a lot Dustin, Kyuta, and bassplayer for the information.
I am going to show him how to do it. But I'm not going to hold his hand every time. That's why I wanted something stable where he wouldn't have to flash something else to get functionality that was missing.

Categories

Resources