Related
Im looking for some advice/input. Im going to start running android on my HTC touch (Bell). What is the best Android rom to use? Are there many issues?
http://forum.xda-developers.com/showthread.php?t=712310
You will be happy you did...
Thanks for the response. Im actually looking at this now. I cant see any install instructions and not sure exactly what files to grab. Will it work with these steps:
Easiest Step-By-Step Android Tutorial for the Vogue (NAND Method/Internal Memory) thread?
Does it matter if I run it off the miniSD vs fully flashing my phone?
ChocBoyWonder said:
Thanks for the response. Im actually looking at this now. I cant see any install instructions and not sure exactly what files to grab. Will it work with these steps:
Easiest Step-By-Step Android Tutorial for the Vogue (NAND Method/Internal Memory) thread?
Does it matter if I run it off the miniSD vs fully flashing my phone?
Click to expand...
Click to collapse
That is a great thread to start at, it's where I first learned.
I've found that Android runs smoother while being run from the phone, not the sd card.
Those instructions should work. I have not really used them since Myn's Donut (older ROM). I dont see why not the process should be the same. I ran off SD for a while during donut days, things were slower. Running off NAND now and its a really nice experience.
It must just be me, but I haven't been able to get camera working on any Android builds. I am thinking my Sd card gets unmounted or something. Camera app starts, I can see display, then Force Closes.
I am running off sd card, I even tried partitioning cards, seems as though one of the ext2 partitions goes bad or something. If I place card in computer, one of the partitions is always corrupt?
I have re-formatted and re-partitioned 3 different cards using Gparted, always same error after installing Android system to Sd and Data to SD in install menu.
I apologize if this isn't clear, trying to explain it as best I can
WoW!
I just finished the install. Now working with Google sync to get my contacts over. I love it already and havent even done much! I may eventually install on the phone. Are the steps any different? Is there a thread to get setup?
Thanks for all the responses.
Go with Incubus26Jc's Super Froyo build on NAND I've been using for a month now and its been awesome hardly any problems
Hey Everyone, first off. I love you all. You've made me LOVE my Vibrant and NookColor more than ever!
I have two questions.. (sry my search on the site wasn't working )
1. I had a 4gb microsd card that I used to put the Autonooter for NC on it. Now I'm seeing alot of updates with froyo and overclocking kernels and I want to try them out. But my 4gb card is frozen solid at 32mb, I tried formating a through windows, I read on another post that I cant find at all that theres a better program out there for fully formatting microsd cards back to the original state.. Does anyone know the program?
2. I've been reading daily on the updates for Froyo, Which one is the current most stable version?
----
Thanks!!!
<3
1. Put the uSD card back into your NC. Under the original (BN) Settings ---> Device Info ---> SD card : first unmount the uSD card, then format it. Then remove from NC.
2. Not my thing, no help, sorry.
Thanks for the help on the SD Card! First step done, alot more to go!
Okay, So I installed Clockwork Recovery and made a backup of my system. After I installed clockwork, My nook froze at boot, I figured out how to get into clockwork recovery and I am currently restoring my eclair.
I see alot of people using froyo, which build and what post did everyone do it from? I see alot of eMMC but I see a Development build.. I'm confused as to which one I should get.
Thanks!
Alright, so I'm 100% brand new to the Nook. Infact, I don't even have it yet, but I'm buying it tomorrow (3/3)
If I'm going to use honeycomb on it, do I just simply pop in the SD card and it's ready to go?
Do I need to root it before hand or is it already rooted?
How do I get GApps and Market running?
I honestly looked around a bit but I'm terribly confused. Any pointers would be greatly appreciated.
EDIT: Also, I can't even seem to get the IMG burned onto my microSD. Win32 Disk Imager keeps spitting back that the SD card doesn't have enough space, but it's an 8GB card with nothing on it, so it has plenty.
1) No, you don't have to root first - just pop in the uSD card and you are good to go.
2) To install Market and GApps you will have to install ADB on your primary machine first (which can be a PITA). There is all sorts of help around to do that. I downloaded a script (search for HoneyGapps.v2 here) that did the install for me in one step.
3) From what I understand the image is too large for Win32 Disk Imager. I used WinImage and it worked fine.
BTW - I am loving HC - I've adopted it completely. My major problem is that many apps are not showing up in the Market, even though they were installed and ran fine on my rooted 2.1 system. I think it is because the Market does not recognize the device name under HC 0.4.
How do I use WinImage to do that?
Sorry, but that program just confuses me, lol
First you use winImage and click disk then restore image. Make sure you have all files selted when looking for the file to restore. Are you going to install it to internal or on a USB card ?
Trying from SD card first unless it's too slow. If I want to install on internal, how do I backup my original Nook data?
Also, I figured out WinImage, I'm burning it now. I used another program, but that didn't do anything when I powered on the Nook. I shouldn't have to do -anything- before booting from the SD, right? The Nook is brand new, I popped in the SD card and it didn't work. We'll see what happens after WinImage burns it though
The SD version is kinda slow and if you look there is a Honeycomb EEMC V4 install that has the google apps and other goodies Installed. It has all you need already put in it. In the post you will find all the links and info needed to install. You just mount your nook like normal to your computer and copie the files from internal memory.
here is the Link use the version 2 dated 2-21
http://forum.xda-developers.com/showthread.php?t=947071
shadowswittness said:
The SD version is kinda slow and if you look there is a Honeycomb EEMC V4 install that has the google apps and other goodies Installed. It has all you need already put in it. In the post you will find all the links and info needed to install. You just mount your nook like normal to your computer and copie the files from internal memory.
here is the Link use the version 2 dated 2-21
http://forum.xda-developers.com/showthread.php?t=947071
Click to expand...
Click to collapse
Haha, I had just started reading that a second ago actually. It lists a lot of problems. Are those problems present in the SD card version as well? Also, is Froyo more stable?
I have been running version 2 for a lil while and it runs smooth. I haven't had any real issues from it. I put it on my wife's nook also. It runs smooth and every app I have installed runs with no issues.
OK, I'm gonna try the script for GApps in a second. Where can I find the drivers for the Nook? I already have ADB installed, I've rooted 3 phones before this, so I got ADB usage down...
EDIT: Also, where can I find info on partitioning the SD card so I can still use it?
Honeycomb is built for tablets and sems more fluid. All are really development builds. We will all be waiting on the devs and google for the actual honeycomb
Which are you going to do the Sd or Internal ? If you load the version 2 internal it already has the Google apps included.
I haven't found a way to backup my original Nook data before installing it on internal. SD card works just fine, as long as I can find a way to partition it so I can still use it as an SD card. Either way, I still need the ADB drivers and the one thread I found so far has a broken link. Boo!
If you install it to internal you can then reformat the sd card and use it as normal.
OK, but then how do I back up the current internal memory and I still need a link to the ADB drivers in case I want to run off SD.
Use my USB mass storage utility (see dev). Make .tar files of internal data and system content.
To restore extract content back onto data and system.
Of course, if you get adb working, make dd images of partitions.. more conventionnal backup than above..
Sent from my HTC Desire using XDA App
Alternatively, can't I just have someone send me their files?
Bump? Anyone?
EDIT: Also, how do I get ADB working if I do the internal HC?
gmap516 said:
Bump? Anyone?
EDIT: Also, how do I get ADB working if I do the internal HC?
Click to expand...
Click to collapse
All your questions in this thread can be answered by doing a little work searching around... you shouldn't expect a personal tutor...
If you put a little of your own effort, you will learn much more than following someone's instructions.
Thanks man, that was helpful. I definitely didn't use the search tool before.
gmap516 said:
Thanks man, that was helpful. I definitely didn't use the search tool before.
Click to expand...
Click to collapse
See? You're learning already then.
so i got CM7 working with gapps and market. no problem there. however, now when i plug in via usb i can't open up the available storage on the SD. my computer sees the drive fine and assigns a letter, but says to insert a disk when i double click to open it up. the space was made available on the 8gb card using easeus.
on the bright side, the computer does recognize the ADB interface just fine which is great because it seems to be a PIA for many people.
last note, if i take out the CM7 bootable card i just have the stock nook color, not rooted. when booted up that way the computer recognizes the nook without any issue.
so what's going on here and how can i access storage while using CM7??
thanks in advance.
Don't have an answer for you but more info would be helpful to figure it out...from the mention of easeus I can figure out you are on winblows...which version? which version of CM? so on and so forth...the more info the better.
deadbot1 said:
Don't have an answer for you but more info would be helpful to figure it out...from the mention of easeus I can figure out you are on winblows...which version? which version of CM? so on and so forth...the more info the better.
Click to expand...
Click to collapse
sorry, little new to all this.
i am using CM7 nightly build 39, yes i'm on windows (XP), used easeus 7.1.1 home edition to repartition which shows ~6 gig unused on the sd.
what other specifics do you need? as i said, i can copy files to the nook's storage, but not the SD card. i used this post here to get CM7 on the SD. no overclocking kernel. the only additional things other than CM7 itself is g-apps and market which i used the instructions from the same thread. that's literally all i've done, without the SD card in the nook boots to complete stock because i haven't even rooted it.
when i tried nookie froyo 0.6.8 before i also had the same issue.
is it a usb driver issue perhaps??
thanks alot.
I am not 100% sure on this, as I also am new. I have only installed to eMMC. I wonder if you need to get and use NookColorUMS. lets you mount any partition on the device.
Maybe one of te devs who ave set up te SD card versions can chime in?
Try the search function as well...really useful for tracking this stuff down.
I just got my Nook Color and am looking into how to go about rooting it for CM7. I checked out CM's Wiki page on it here and it mentioned using uNooter. I haven't read about this tool anywhere else and Google searches for it turn up practically nothing. Is this not the right tool to use? The forums mostly seem to mention ManualNooter, Auto-Nooter, etc. Also is it possible to flash CM7 on the internal memory and avoid using an SD card altogether?
Never heard of unooter and I've been reading theses forums since December. Auto mooter was to root the older firmware 1.0 ,1.01,and 1.1. Manualnooter is for the newer froyo firmware.
Rooting stock is not required to install CM7.
You simply need to create a Clockworkmod recovery microSD card and you can then flash CM7 (which is pre-rooted) from Clockworkmod.
martian21 said:
Rooting stock is not required to install CM7.
You simply need to create a Clockworkmod recovery microSD card and you can then flash CM7 (which is pre-rooted) from Clockworkmod.
Click to expand...
Click to collapse
Thanks. I figured this would be relatively easy compared to rooting and putting CM7 on my EVO but reading on here there seemed to be a few different approaches. Will that method allow me to flash CM7 to the eMMC, and after that point will I no longer need the SD card to boot? I ask because I don't have a card on hand and am considering backing up the contents from my phone's card and using that.
xdp said:
Thanks. I figured this would be relatively easy compared to rooting and putting CM7 on my EVO but reading on here there seemed to be a few different approaches. Will that method allow me to flash CM7 to the eMMC, and after that point will I no longer need the SD card to boot? I ask because I don't have a card on hand and am considering backing up the contents from my phone's card and using that.
Click to expand...
Click to collapse
Correct.
You only need the SD to install a bootable CWM then you can flash CM7 from that. After words when CM7 is installed to eMMC you are able to use Rom Manager to install CWM to eMMC as well, so everything will be set up on the device's internal memory. SD is needed only for the initial boot of CWM to install CM7.
Nburnes said:
Correct.
You only need the SD to install a bootable CWM then you can flash CM7 from that. After words when CM7 is installed to eMMC you are able to use Rom Manager to install CWM to eMMC as well, so everything will be set up on the device's internal memory. SD is needed only for the initial boot of CWM to install CM7.
Click to expand...
Click to collapse
Thanks. From reading around it seems you can't use a phone or the Nook to mount the card and write the image, so I'll have to buy a reader and might as well get a card for the Nook at the same time. Since I'll be flashing CM7 to eMMC does it really matter if I get a class 4 or above card like many suggest? I'm not sure what's in my EVO but that is my benchmark. Class 2 seems to be what comes up in searches the most.
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Sent from my NookColor using XDA App
martian21 said:
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Sent from my NookColor using XDA App
Click to expand...
Click to collapse
Transcend 8 GBs have worked beautifully on all 3 NC's in my house.
xdp said:
I just got my Nook Color and am looking into how to go about rooting it for CM7. I checked out CM's Wiki page on it here and it mentioned using uNooter. I haven't read about this tool anywhere else and Google searches for it turn up practically nothing. Is this not the right tool to use? The forums mostly seem to mention ManualNooter, Auto-Nooter, etc. Also is it possible to flash CM7 on the internal memory and avoid using an SD card altogether?
Click to expand...
Click to collapse
I was the one that put together uNooter after being contacted by the individual that maintains the CyanogenMod wiki. They wanted a universal Nooter that would only root the device, install Superuser, ADB, RomManger, and work on all versions of the NC software. They asked that it be called uNooter. It is not released anywhere else, so that is why you did not see any mention of it on a Google search.
martian21 said:
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Click to expand...
Click to collapse
That information is really only relevant to running a ROM from the SD card. If you're only using the card for storage, or to get CM7 on eMMC, manufacturer and card class don't matter.
xdp said:
Thanks. From reading around it seems you can't use a phone or the Nook to mount the card and write the image, so I'll have to buy a reader and might as well get a card for the Nook at the same time. Since I'll be flashing CM7 to eMMC does it really matter if I get a class 4 or above card like many suggest? I'm not sure what's in my EVO but that is my benchmark. Class 2 seems to be what comes up in searches the most.
Click to expand...
Click to collapse
I wrote my image over USB to a card in the NC without a card reader. I've seen wiki guides saying there's a greater chance of the write getting interrupted, rendering the card unusable at least in the short term, but it worked for me. It was only when I wanted to revert the card to storage that I ended up needing a card reader. The links in my sig have a little more info about using the NC as your card reader, but you're probably better off just grabbing one.
Also, while CM7 does not require an SD card, many apps do. Your experience will be somewhat limited without one.
GMPOWER said:
I was the one that put together uNooter after being contacted by the individual that maintains the CyanogenMod wiki. They wanted a universal Nooter that would only root the device, install Superuser, ADB, RomManger, and work on all versions of the NC software. They asked that it be called uNooter. It is not released anywhere else, so that is why you did not see any mention of it on a Google search.
Click to expand...
Click to collapse
Great to hear directly from the source, thanks! I'm surprised more people don't point to your tool on the forums given that it's right on the CM Wiki. At this point I'm a little confused about the various approaches to do this. Does your tool install ROM Manager directly into the stock Nook interface, and then I flash from there, versus booting CWM off the SD as people mentioned earlier in the thread? Sorry if that's completely off-base.
Taosaur said:
That information is really only relevant to running a ROM from the SD card. If you're only using the card for storage, or to get CM7 on eMMC, manufacturer and card class don't matter.
I wrote my image over USB to a card in the NC without a card reader. I've seen wiki guides saying there's a greater chance of the write getting interrupted, rendering the card unusable at least in the short term, but it worked for me. It was only when I wanted to revert the card to storage that I ended up needing a card reader. The links in my sig have a little more info about using the NC as your card reader, but you're probably better off just grabbing one.
Also, while CM7 does not require an SD card, many apps do. Your experience will be somewhat limited without one.
Click to expand...
Click to collapse
Yeah, I thought about this as well and figured I'd want a full-time card for the device so I ordered a card with SD adapter. I figured the specs didn't matter at all for a data card but picked up a class 4 Sandisk anyway.
xdp said:
Great to hear directly from the source, thanks! I'm surprised more people don't point to your tool on the forums given that it's right on the CM Wiki. At this point I'm a little confused about the various approaches to do this. Does your tool install ROM Manager directly into the stock Nook interface, and then I flash from there, versus booting CWM off the SD as people mentioned earlier in the thread? Sorry if that's completely off-base.
Click to expand...
Click to collapse
I received notice this past Monday that the cleaned up version of the CyanogenMod wiki was online, so not a whole lot of exposure for people to talk about it. I believe the old wiki had listed the different Auto-Nooter and Manual-Nooter that went with each software version, thus taking up a lot of space and confusion. AN and MN are more tailored to people that want to stick with the stock software, but enable full Android Market access. People that want to go from stock to CyanogenMod don’t need all the extra software that is bundled with AN and MN just to be able to flash CyanogenMod. By eliminating all the version specific software I was able to create a version that would work on all current, and hopefully future, software versions.
Yes, my versions will install Rom Manager directly into the interface. You would then allow Rom Manger to install CWM Recovery, and then you can download and install CyanogenMod from the device. You could also take a full backup of your current stock rom. Using uNooter or bootable CWM will both get you to where you want to go, it is really up to you on how you want to get there.
Instructions for installing CM7 to the eMMC using CWM on a SD card (which can later be reformatted for storage) is in this thread: http://forum.xda-developers.com/showthread.php?t=1030227.
GMPOWER and bigbob23: Thanks for the info, that was exactly what I needed to clear everything up. I suppose backing up the stock ROM would be useful in case I ever needed to restore it for warranty purposes or anything. I'm not sure which approach I'll go with, my SD card came today so I'll be reading over both techniques and giving one a shot!
Thanks again.
I went through the process with uNooter as outlined on the CM Wiki and it went perfectly. The only thing was I had to use SD Formatter and the earliest 0.1 version of Win32 Disk Imager to get the image to write to the SD card. Not sure if that problem is specific to Win7 64-bit but maybe I can mention it on the wiki.
xdp said:
I went through the process with uNooter as outlined on the CM Wiki and it went perfectly. The only thing was I had to use SD Formatter and the earliest 0.1 version of Win32 Disk Imager to get the image to write to the SD card. Not sure if that problem is specific to Win7 64-bit but maybe I can mention it on the wiki.
Click to expand...
Click to collapse
I am glad that you got everything to work right. I think the problems that you might have experienced are more associated with win7 x64. My replacement laptop with win7 x64 will not be here for another two weeks for me to test it on, but in the past I have had to use Unlocker almost every time to unlock the usb drive before I could proceed with flashing using Win32 disk imager. On my current windows 7 x86 setup, I have yet had to use Unlocker to be able to flash an image with the win32 program. HERE is a post with people having problems in the past with win32 disk imager on win7 x64, they took the same path that you did with Panasonic SD Card Formatter to fix it.
uNooter
I guess this worked for the latest firmware of 1.2.0? (I am about to root one soon!) thanks in advance!)
AF9210 said:
I guess this worked for the latest firmware of 1.2.0? (I am about to root one soon!) thanks in advance!)
Click to expand...
Click to collapse
I just got my nook last week so I'm assuming I had the latest factory firmware when rooting, but I didn't check.
xdp said:
I just got my nook last week so I'm assuming I had the latest factory firmware when rooting, but I didn't check.
Click to expand...
Click to collapse
If you see "Read Forever" when booting (stock) then "Yes" you have the latest firmware.
ADB after uNooter?
Above, GMPOWER mentioned ADB as one of the items uNooter installed. I've rooted with uNooter in part because *nothing* *else* I could find would actually boot on my NC and in part because I liked the idea of a relatively minimal root. I figured I could then push any apk's I wanted to add with adb.
Unfortunately, that doesn't seem to be working. I used "NookColor Tools -> All Settings -> Development" to enable USB debugging, but 'adb devices' shows nothing. If I plug in my G2 with CM7, adb finds it just fine, so I'm pretty sure I've got the computer side of things working. Any hints about getting the NC to play nice?