[Q] SGS and exteral film watching - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi there,
Has there been any work done on getting the USB to send to an external video source i.e HDMI DVI or VGA would be possible?
I have the Nokia cable used to send the display into the TV. Although it does work, the image is abysmal.
Perhaps someone might have given this some thought? Perhaps a Voodoo HDMI project is sought!

It's impossible. The chipset does not have that capability.

Related

Tv-Out Quality

I recently purchased a 3.5mm to video/audio cable for my samsung captivate and I am noticing that the quality of the videos on the 46" LCD TV is not that great compared to when i watch the same videos on my computer. The cable I purchased is a Scoshe brand that I found locally from Fry's Electronics.
Is the sub-par quality due to the phone output or the cable itself? What has been your experiences with TV-Out?
Thanks.
You're using a VGA cable, you'll never get HD quality content. It's akin to trying to run a VHS on your new 46" TV. It'll just never look as good as the HD content you've come to expect in the last few years.
For me, it works well enough on my GF's old 90's tv if we're going to watch a movie or some TV shows. I would never use it on my TV at home though.
dude not vga, rca, aka composite video. composite is a notch above vhs and a notch below dvd. so yeah it's the tv out and the cable.
hopefully the micro usb to hdmi will work on the captivate with a future update. there are reports that it works on the epic. if not you can share with dlna via allshare.
i have a $50 media box thing from netgear and it works but the phone cant push the video to it you can only tick the video for playback (dont add to playlist) and let the other end play the video. also windows media center can be a dlna server and an xbox can play it as a media center extender, the ps3 is also dlna certified. there are also upnp apps in the market that should work with xbox. and ftp and webdav apps that will let you mount the phone as a webdrive or access with a browser. i know many of those options are great in the home but useless for travel and if your home you dont need it anyway.
the netgear device i have is very portable but unfortunately you still need a usb wireless adapter to use it, im sure there are similar devices that have built in wireless but may be more expensive.
Thanks for the respones. Would you suggest getting a "higher quality" cable or am I just basically stuck with what I got? The pictures and videos look blurry (and pixelated) when I view them on the TV and I just want to know if it has anything to do with the cable.
gormander said:
Thanks for the respones. Would you suggest getting a "higher quality" cable or am I just basically stuck with what I got? The pictures and videos look blurry (and pixelated) when I view them on the TV and I just want to know if it has anything to do with the cable.
Click to expand...
Click to collapse
live with it till the usb to hdmi thing works
edit; if the cable feels very thin and fragile it may have poor noise rejection, some are not sheiled very well. also if the you had to mix the colors around to get it to work that's not good. video cables are a different impedance so you need to use the yellow one for video. i know 3.5mm av cables dont follow a standard format and i dont know if you had to mix and match connectors to get a picture. but on a 46 inch tv you wont get good quality no matter how high the cable quality is, it's just an old inferior technology and why the make s-video, componant video, vga, dvi and hdmi.
I have a 46 inch LCD and have attached the phone to it. A HD movie looks ok, but not near as good as running via the PC at 1080p via HDMI. When and if they get the microUSB to HDMI working, we should see an improvement.

[Q] HDMI adapter issue (MHL)

Hi,
I just received an OEM Micro USB to HDMI adapter today.
I connected my Note to the adapter and then to the HDMI cable of my TV.
Unfortunately there is no HDMI signal on the TV side.
Now, I don't know howto activate TV output on the Note. I don't even know if that's possible.
Can anyone guide me on how to activate HDMI output on the Galaxy Note ?
Should I make any settings ?
Should I play a video ? (or would it give out video from HDMI even at home screen ?)
Should I power the phone and/or the HDMI adapter through USB ?
Thanks.
mrmrmrmr said:
Hi,
I just received an OEM Micro USB to HDMI adapter today.
I connected my Note to the adapter and then to the HDMI cable of my TV.
Unfortunately there is no HDMI signal on the TV side.
Now, I don't know howto activate TV output on the Note. I don't even know if that's possible.
Can anyone guide me on how to activate HDMI output on the Galaxy Note ?
Should I make any settings ?
Should I play a video ? (or would it give out video from HDMI even at home screen ?)
Should I power the phone and/or the HDMI adapter through USB ?
Thanks.
Click to expand...
Click to collapse
Connect HDMI cable to MHL adapter, and other end into TV. (duh...)
Plug your charger cable into the MHL adapter. (output won't work without this)
Plug your MHL adapter into Note. (no configuring required!)
Everything you do on your Note will be mirrored on your TV/Screen, at the Note's native 1280x800 resolution. Plain and simple!
Video's that are played via the MHL adapter will be played at their own native resolution, up to and including 1080p.
Enjoy!
thank you.
it doesn't work unfortunately.
maybe my adapter is not working but it passes power through USB.
how can I understand if it really doesn't pass HDMI ?
mrmrmrmr said:
thank you.
it doesn't work unfortunately.
maybe my adapter is not working but it passes power through USB.
how can I understand if it really doesn't pass HDMI ?
Click to expand...
Click to collapse
It's possible that you have a faulty adapter. It should just be plug and play, but you have to make sure that the adapter is receiving external USB power in order for it to work.
ok; it works now.
the micro USB connector was not fully connected...
thanks.
Similar issue
Hi, me to facing similar issue. The MHL adapter when connected does not show any notification on the screen. The only thing it does is charging the phone. Does it mean its a faulty adapter?
i hope i am answering my own question but still if there is anything which i may be missing here
mesmerisor said:
Hi, me to facing similar issue. The MHL adapter when connected does not show any notification on the screen. The only thing it does is charging the phone. Does it mean its a faulty adapter?
i hope i am answering my own question but still if there is anything which i may be missing here
Click to expand...
Click to collapse
and what rom and kernel are you on ?
I'm on stock running ICS and I get funky results, sometimes it works for a minute or two sometimes just a few seconds. The problem seems to be on the TV, a Sony Bravia, the HDMI setting has to be Wide for picture quality (it has zoom, smart zoom, wide, 16:9 and 4:3) but as soon as there is some glitch in receiving data from the phone the TV begins to scroll through those settings to regain a signal and I can't force a setting on wide for the HDMI connector, only for one of the SCART connectors.
The frustrating part is that it works flawlessly when I connect an Asus Transformer. Could it be the MHL's USB connector? If that is the case how can I check it?
Sent from my GT-N7000 using Tapatalk 2
Just in case anyone relooks this up.
Connect everything. Then REBOOT PHONE/NOTE. The TV will then detect it auto.
Hope this helps someone !!
It didnt help me... my sony bravia 32" tv just wont show the gnote's video. the same adapter works fine on my samsung 32" tv but not on the sony. I have even upgarded the sony tv's firmware too. tried changing to "Wide Zoom" settings and other things but still no video showing, although the tv does know there is something plugged in to HDMI port 1.
Anyone else got ideas?
Samsung doesn't like sony!
sonhy said:
Anyone else got ideas?
Click to expand...
Click to collapse
lol, just don't try that any sony device to work together with another samsung device, this is a general rule for electronic trademarks.
*Frankly my friend, I lost a complete day trying my sony ericcson bt handset to work with my note, no success at all, so, I just bought a samsung one and everything gone well.
that sux, bluetooth is a standard and im sure there are no variants... they are cheap, so i will buy another one from ebay and see if it is bcos of the adpater and not the TV.
zopilote said:
lol, just don't try that any sony device to work together with another samsung device, this is a general rule for electronic trademarks.
*Frankly my friend, I lost a complete day trying my sony ericcson bt handset to work with my note, no success at all, so, I just bought a samsung one and everything gone well.
Click to expand...
Click to collapse
That is strange I have the MW-600 unit and it works fine with my Note, Despite, Galaxy Tab2 and Asus Transformer.
Sent from my GT-N7000 using Tapatalk 2
chappatti said:
Just in case anyone relooks this up.
Connect everything. Then REBOOT PHONE/NOTE. The TV will then detect it auto.
Click to expand...
Click to collapse
This did help me using a Galaxy Note and a cheap no-name MHL adapter I bought of eBay. Had it connected to the HDMI input on my Dell WFP3008 monitor.
mhl n7000 camera not starting when connected
hi sorry for posting after 4 years on this thread. is the camera or camera using apps (like skype) working for anyone when the phone is coonected and displaying through mhl to tv? because whenever i try to use camera when i am connected it is not working. on stock 4.1.2. thank you

[Q] RCA video input possible?

Hey gang. I'm doing some field research on Loons this summer, and we, may be setting up a camera feed that only has RCA output. I'd rather not buy a portable TV if I can use my Tab... I think it may be possible to get an RCA to HDMI adapter, but is the Samsung HDMI adapter made to do video IN? If so, is there any software out there for viewing video in?
Any ideas appreciated!

HDCP problems and other woes...

Hi All,
So I had what I thought was the genius idea of buying a Chrome Cast to hook up to my old projector for instant Netflix et al. cinema in my living room, it's all set up... screen, speakers everything but there's just one small problem, no picture.
The reason it isn't straightforward forward is that my projector is old enough not to have an HDMI port, though it does say that it supports HDMI on it's DVI port using an adaptor. (Which I can't find). Also of course I'd have no sound.
What I have...
So with a little research I bought this HDMI to VGA + 3.5mm Jack Audio Cable Video Converter Adapter, I also bought a couple of gender changers, one VGA and one HDMI to get the whole lot to stick together.
The projector is an Optoma ThemeScene H57, so quite old but actually pretty decent (hence reluctance to take the plunge on a new one and also because this was supposed to be a cheap project)
What is happening...
What I'm experiencing is a black screen, which I am now attributing to HDCP problems... the projector scans and detects that there is a source plugged in the way you'd expect and looks like it's gone through the process of adjusting to that source signal and then just happily displays a black screen. Occasionally it also says "Out of Range". The sound comes out garbled when trying to play netflix or youtube.
I have tried it with a VGA to DVI adaptor into the DVI input to witht he same result.
I have also tried plugging my Nexus 10 into the HDMI input on the convertor, this yields a different result, white static, but still no picture.
The projector does work... it's even briefly displayed a chrome logo when I tried factory resetting the Chromecast while it was plugged into the projector (via the adaptor obviously) but then just returned to the black screen.
A weird caveat to all this is if I play something on Play Music then I still get a black screen but the sound comes out fine.
What I plan to try
I read that HDCP can cause problems like this and that it can sometimes be fixed using a powered HDMI splitter. Apparently this negotiates the HDCP handshake with the Chromecast and then passes on the signal to the two output ports, which sounds a bit dodgy, why is it so simple to bypass? Plus it's £30 for one of those which means my cheap project is getting more and more expensive.
So...
Any help on this would be really REALLY appreciated. Please.
Crin said:
Hi All,
So I had what I thought was the genius idea of buying a Chrome Cast to hook up to my old projector for instant Netflix et al. cinema in my living room, it's all set up... screen, speakers everything but there's just one small problem, no picture.
The reason it isn't straightforward forward is that my projector is old enough not to have an HDMI port, though it does say that it supports HDMI on it's DVI port using an adaptor. (Which I can't find). Also of course I'd have no sound.
What I have...
So with a little research I bought this HDMI to VGA + 3.5mm Jack Audio Cable Video Converter Adapter, I also bought a couple of gender changers, one VGA and one HDMI to get the whole lot to stick together.
The projector is an Optoma ThemeScene H57, so quite old but actually pretty decent (hence reluctance to take the plunge on a new one and also because this was supposed to be a cheap project)
What is happening...
What I'm experiencing is a black screen, which I am now attributing to HDCP problems... the projector scans and detects that there is a source plugged in the way you'd expect and looks like it's gone through the process of adjusting to that source signal and then just happily displays a black screen. Occasionally it also says "Out of Range". The sound comes out garbled when trying to play netflix or youtube.
I have tried it with a VGA to DVI adaptor into the DVI input to witht he same result.
I have also tried plugging my Nexus 10 into the HDMI input on the convertor, this yields a different result, white static, but still no picture.
The projector does work... it's even briefly displayed a chrome logo when I tried factory resetting the Chromecast while it was plugged into the projector (via the adaptor obviously) but then just returned to the black screen.
A weird caveat to all this is if I play something on Play Music then I still get a black screen but the sound comes out fine.
What I plan to try
I read that HDCP can cause problems like this and that it can sometimes be fixed using a powered HDMI splitter. Apparently this negotiates the HDCP handshake with the Chromecast and then passes on the signal to the two output ports, which sounds a bit dodgy, why is it so simple to bypass? Plus it's for one of those which means my cheap project is getting more and more expensive.
So...
Any help on this would be really REALLY appreciated. Please.
Click to expand...
Click to collapse
I'm afraid the only solution is to get an HDCP compliant projector...
CCast will only pass on HDCP info from the Device it is plugged into, but has no HDCP of it's own. And it can not be faked.
The Adapter will also break any HDCP as HDCP is meant to deny you the ability to do what your trying to do in the name of not letting you make copies of the content.
You will be fine with Content that does not require a HDCP signature to play (self ripped movies or non-DRM materials) but something like Netflix has little chance of working without some HDCP compliant device being connected the the CCast.
You can get a standard HDMI DVI adaptor for cheap, and maybe this will allow HDCP information to be kept. However you may be unable to keep the audio stream without a more elaborate device.
Sent from my Nexus 5 using Tapatalk
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it? Is there such a thing as an HDCP respectful adaptor with an Audio splitter?
Crin said:
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it?
Click to expand...
Click to collapse
Yes you're essentially converting a Digital signal to analog and HDCP only works via Digital.
A Real HDMI to DVI adapter as suggested may help but make sure in the specs it says it will pass HDCP.
And do make sure it also has Audio Breakout.
Crin said:
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it? Is there such a thing as an HDCP respectful adaptor with an Audio splitter?
Click to expand...
Click to collapse
Your projector is a little newer than my Sony VPL-HS10, but it might have the same issue - the marketing wasn't 100%. My VPL-HS10 initially said it was HDCP-compliant on the DVI-D port, but ended up that it isn't. Well, it might be for a few select devices, but it isn't up-to-spec for the general standard.
What you really need is an HDCP stripper, but those are illegal in most parts (especially the US).
Your other potential problem is that the adapter may not be converting the HDMI timings over to VGA, and rather expecting the receiving device to compensate. Some can, some can't.
The specs for your projector says it has a DVI-I port, so it might accept analog on that port.
So first I'd try connecting DVI-to-VGA adapter (the ones that normally come with video cards to get VGA out of the DVI port) and connecting Chromecast --HDMI--> HDMI-to-VGA --VGA--> DVI-to-VGA adapter --DVI--> Projector and see if you get a different result on the DVI input - sometimes the scaler is separate or different for different inputs.
If that doesn't work, I recommend HDfury2 or newer - beware of counterfeits as there are many fakers online. I have successfully used HDfury products with my Sony projector from various sources. You'll want the HDfury2 or newer to get the audio breakout, which is a 3.5mm (1/8-inch) analog stereo and digital (optical TOSlink).
bhiga said:
What you really need is an HDCP stripper, but those are illegal in most parts (especially the US).
.
Click to expand...
Click to collapse
Not to mention probably as expensive as a new Projector with HDMI and HDCP support! LOL
Crin, did you ever get this solved?
I bought the same stupid converter you showed in the image.

Chromecast 3 (2018)

Hi everyone!
Does anyone knows a method (either hardware or software) to force the Chromecast to output at 720p?
Background:
I have a DVI monitor and I used a simple HDMI to DVI adapter to plug my laptop in it.
My laptop died and I decided to use a Chromecast and my phone as a replacement.
After the Chromecast arrived and I plugged it in, I turned on screen mirror and hooked my kb/m to the phone and everything, only to realize that the sound was also being streamed to the Chromecast.
Needless to say that my monitor doesn't have audio output.
So I got one of those HDMI audio diverter to draw the audio and feed it to my audio system, so far so good.
I used my laptop to game was well, so after starting some withdraw from games, I decided to grab my PS2 console and got on of those PS2 to HDMI dongles and play some old-school games, then I started facing an issue: swapping cables.
To fix that I got one of those 3 port HDMI hubs and plugged both devices to it.
However the monitor is 720p, the HDMI audio diverter knows that and replicates this information to it's input port which makes the Chromecast display in 720p.
But the hub does not, it report it's 1080p making the Chromecast send 1080p video signal and the display only shows a black screen because of it not knowing how to deal with that.
So if there's a way to force the Chromecast to display in 720p it would be my salvation.
So if anyone out there knows any possible solution, please, I would be really grateful.
Thanks everyone!

Categories

Resources