Hey gang. I'm doing some field research on Loons this summer, and we, may be setting up a camera feed that only has RCA output. I'd rather not buy a portable TV if I can use my Tab... I think it may be possible to get an RCA to HDMI adapter, but is the Samsung HDMI adapter made to do video IN? If so, is there any software out there for viewing video in?
Any ideas appreciated!
Related
Hi there,
Has there been any work done on getting the USB to send to an external video source i.e HDMI DVI or VGA would be possible?
I have the Nokia cable used to send the display into the TV. Although it does work, the image is abysmal.
Perhaps someone might have given this some thought? Perhaps a Voodoo HDMI project is sought!
It's impossible. The chipset does not have that capability.
Hi to all
Has anyone tried the above?
Connecting the dock's HDMI to TV watch the picture in tv and try at this moment if speakers line out 3,5 jack had audio output signal? or it has no output and the sound is only going through the HDMI cable?
If anyone please has the dock, check this and give me the results.
Thanks in advance
The best conection for playing back Galaxy TAB video, picture and music files was,
GT with it USB cable on Mass Storage connection + TV with USB port & media play function.
The benefits from this conection was,
1. Single cable connection.
2. Only need connect GT to TV USB port, so less works & movements retriction between TV, couch/bed, power socket.
3. TV not only playback GT files but also provide power charging to GT. fter playback 1 hour of Full HD video, my GT battery power now up to 71% from initial around 50%+ (can't remeber the exact number).
4. Able to move around GT directory & playback files using one TV remote control. That's saving troubles of using 2 devices, GT screen + TV remote.
The thing is not a TV with USB, I have not a USB TV, I had used the dock in my Toshiba connected with HDMI cable and I have perfect video but NO SOUND at all, I had not found a solution yet, I had tried with several HDMI cables, still no sound.
I cannot find any settings for the HDMI, in the Tab.
Has anyone has any solution?
I had read that a lot of Galaxy Tab owners had HDMI sound problems.
The bad thing is when the TAB sees the HDMI connection mutes the sound in the tab and drives it through the HDMI cable.
The 3.5 Jack audio out in the back of the dock has no sound, when HDMI is connected
Any solution??
papatzis said:
Hi to all
Has anyone tried the above?
Connecting the dock's HDMI to TV watch the picture in tv and try at this moment if speakers line out 3,5 jack had audio output signal? or it has no output and the sound is only going through the HDMI cable?
If anyone please has the dock, check this and give me the results.
Thanks in advance
Click to expand...
Click to collapse
that's a really good question and makes a lot of sense. for the 2nd poster, I think almost all of us do not have usb inputs on our tvs. lucky you though
if the hdmi out sends pic + audio but the audio out is still available in the 1/8" adapter or another method then it would be really good.
would be amazing if the tab had digital audio out through a standards compliant consumer digital audio cable (rca or fibre) though
oh well, I'm dreaming right now.
Hello, I have recently started a project on trying to get my "officially unsupported" device to work with my head unit(hu) that supports rca video in. I need some opinions on what items to purchase to get maximum compatibility. I do have a very limited price range so i can't keep trying new adapters till I find one that works.
Project information:
Head Unit: Pioneer AVH-P330BT double DIN touch screen head unit
Phone: Telstra HTC Vivid(Velocity, Raider, whatever you want to call it. Pretty obvious and unneeded anyway)
Possible link scenarios and items needed:
Code:
[B]Setup 1 -[/B]
This setup comes with both an mhl connector plus an hdmi to rca cable in one purchase. I would connect the mhl adapter to the device as per normal, and the hdmi to rca to the mhl adapter and to the back of my head unit, then change the display on my head unit to display the rca input from my phone screen.
required items:
- http://www.ebay.com/itm/Micro-USB-MHL-to-HDMI-Adapter-HDMI-Male-to-3-RCA-Male-Cable-for-Mobile-Phone-/350826228990
[B]Setup 2 -[/B]
same as above, but this time using an hdmi to rca adapter box, along with an mhl adapter, with the mhl adapter's hdmi cable plugged into the rca dapter, and rca cables running from the adapter to the hu. this is a bit more expensive, but the other way almost seems too cheap of a setup to be reliable.
required items:
- http://www.amazon.com/gp/product/B0080KN18K/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1&tag=r601000010-20
- http://www.ebay.com/itm/MHL-Micro-USB-To-HDMI-HDTV-Adapter-Cable-For-HTC-EVO-3D-Vivid-Sensation-4G-ONE-X-/350640939278?pt=US_Video_Cables_Adapters&hash=item51a3d4210e
I would love people's opinions on this project and if they have previously tried something like this and their results from doing so. Who knows, maybe someone else was wondering the same thing I have been and gets something from this thread.
Cheers guys - Tradie
Smartphone Integration
Hi Community,
if you want to integrate your smartphone into any car, 'App Your Car' is the answer.
App Your Car is a small and clever gadget, which, combined with your smartphone, is everything you need.
Our crowdfunding campaign already raised 30% of the needed funds. It would be amazing if you could help us to spread the word to the the community.
Please have a look at our website or campaign:
Website: www [dot] appyourcar [dot] com
Indiegogo: igg [dot] me/at/appyourcar
Hi All,
So I had what I thought was the genius idea of buying a Chrome Cast to hook up to my old projector for instant Netflix et al. cinema in my living room, it's all set up... screen, speakers everything but there's just one small problem, no picture.
The reason it isn't straightforward forward is that my projector is old enough not to have an HDMI port, though it does say that it supports HDMI on it's DVI port using an adaptor. (Which I can't find). Also of course I'd have no sound.
What I have...
So with a little research I bought this HDMI to VGA + 3.5mm Jack Audio Cable Video Converter Adapter, I also bought a couple of gender changers, one VGA and one HDMI to get the whole lot to stick together.
The projector is an Optoma ThemeScene H57, so quite old but actually pretty decent (hence reluctance to take the plunge on a new one and also because this was supposed to be a cheap project)
What is happening...
What I'm experiencing is a black screen, which I am now attributing to HDCP problems... the projector scans and detects that there is a source plugged in the way you'd expect and looks like it's gone through the process of adjusting to that source signal and then just happily displays a black screen. Occasionally it also says "Out of Range". The sound comes out garbled when trying to play netflix or youtube.
I have tried it with a VGA to DVI adaptor into the DVI input to witht he same result.
I have also tried plugging my Nexus 10 into the HDMI input on the convertor, this yields a different result, white static, but still no picture.
The projector does work... it's even briefly displayed a chrome logo when I tried factory resetting the Chromecast while it was plugged into the projector (via the adaptor obviously) but then just returned to the black screen.
A weird caveat to all this is if I play something on Play Music then I still get a black screen but the sound comes out fine.
What I plan to try
I read that HDCP can cause problems like this and that it can sometimes be fixed using a powered HDMI splitter. Apparently this negotiates the HDCP handshake with the Chromecast and then passes on the signal to the two output ports, which sounds a bit dodgy, why is it so simple to bypass? Plus it's £30 for one of those which means my cheap project is getting more and more expensive.
So...
Any help on this would be really REALLY appreciated. Please.
Crin said:
Hi All,
So I had what I thought was the genius idea of buying a Chrome Cast to hook up to my old projector for instant Netflix et al. cinema in my living room, it's all set up... screen, speakers everything but there's just one small problem, no picture.
The reason it isn't straightforward forward is that my projector is old enough not to have an HDMI port, though it does say that it supports HDMI on it's DVI port using an adaptor. (Which I can't find). Also of course I'd have no sound.
What I have...
So with a little research I bought this HDMI to VGA + 3.5mm Jack Audio Cable Video Converter Adapter, I also bought a couple of gender changers, one VGA and one HDMI to get the whole lot to stick together.
The projector is an Optoma ThemeScene H57, so quite old but actually pretty decent (hence reluctance to take the plunge on a new one and also because this was supposed to be a cheap project)
What is happening...
What I'm experiencing is a black screen, which I am now attributing to HDCP problems... the projector scans and detects that there is a source plugged in the way you'd expect and looks like it's gone through the process of adjusting to that source signal and then just happily displays a black screen. Occasionally it also says "Out of Range". The sound comes out garbled when trying to play netflix or youtube.
I have tried it with a VGA to DVI adaptor into the DVI input to witht he same result.
I have also tried plugging my Nexus 10 into the HDMI input on the convertor, this yields a different result, white static, but still no picture.
The projector does work... it's even briefly displayed a chrome logo when I tried factory resetting the Chromecast while it was plugged into the projector (via the adaptor obviously) but then just returned to the black screen.
A weird caveat to all this is if I play something on Play Music then I still get a black screen but the sound comes out fine.
What I plan to try
I read that HDCP can cause problems like this and that it can sometimes be fixed using a powered HDMI splitter. Apparently this negotiates the HDCP handshake with the Chromecast and then passes on the signal to the two output ports, which sounds a bit dodgy, why is it so simple to bypass? Plus it's for one of those which means my cheap project is getting more and more expensive.
So...
Any help on this would be really REALLY appreciated. Please.
Click to expand...
Click to collapse
I'm afraid the only solution is to get an HDCP compliant projector...
CCast will only pass on HDCP info from the Device it is plugged into, but has no HDCP of it's own. And it can not be faked.
The Adapter will also break any HDCP as HDCP is meant to deny you the ability to do what your trying to do in the name of not letting you make copies of the content.
You will be fine with Content that does not require a HDCP signature to play (self ripped movies or non-DRM materials) but something like Netflix has little chance of working without some HDCP compliant device being connected the the CCast.
You can get a standard HDMI DVI adaptor for cheap, and maybe this will allow HDCP information to be kept. However you may be unable to keep the audio stream without a more elaborate device.
Sent from my Nexus 5 using Tapatalk
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it? Is there such a thing as an HDCP respectful adaptor with an Audio splitter?
Crin said:
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it?
Click to expand...
Click to collapse
Yes you're essentially converting a Digital signal to analog and HDCP only works via Digital.
A Real HDMI to DVI adapter as suggested may help but make sure in the specs it says it will pass HDCP.
And do make sure it also has Audio Breakout.
Crin said:
According to this page...
http://www.projectorcentral.com/Optoma-H57.htm
It is actually HDCP compliant... so does that mean it's the adaptor that's breaking it? Is there such a thing as an HDCP respectful adaptor with an Audio splitter?
Click to expand...
Click to collapse
Your projector is a little newer than my Sony VPL-HS10, but it might have the same issue - the marketing wasn't 100%. My VPL-HS10 initially said it was HDCP-compliant on the DVI-D port, but ended up that it isn't. Well, it might be for a few select devices, but it isn't up-to-spec for the general standard.
What you really need is an HDCP stripper, but those are illegal in most parts (especially the US).
Your other potential problem is that the adapter may not be converting the HDMI timings over to VGA, and rather expecting the receiving device to compensate. Some can, some can't.
The specs for your projector says it has a DVI-I port, so it might accept analog on that port.
So first I'd try connecting DVI-to-VGA adapter (the ones that normally come with video cards to get VGA out of the DVI port) and connecting Chromecast --HDMI--> HDMI-to-VGA --VGA--> DVI-to-VGA adapter --DVI--> Projector and see if you get a different result on the DVI input - sometimes the scaler is separate or different for different inputs.
If that doesn't work, I recommend HDfury2 or newer - beware of counterfeits as there are many fakers online. I have successfully used HDfury products with my Sony projector from various sources. You'll want the HDfury2 or newer to get the audio breakout, which is a 3.5mm (1/8-inch) analog stereo and digital (optical TOSlink).
bhiga said:
What you really need is an HDCP stripper, but those are illegal in most parts (especially the US).
.
Click to expand...
Click to collapse
Not to mention probably as expensive as a new Projector with HDMI and HDCP support! LOL
Crin, did you ever get this solved?
I bought the same stupid converter you showed in the image.
Hi everyone!
Does anyone knows a method (either hardware or software) to force the Chromecast to output at 720p?
Background:
I have a DVI monitor and I used a simple HDMI to DVI adapter to plug my laptop in it.
My laptop died and I decided to use a Chromecast and my phone as a replacement.
After the Chromecast arrived and I plugged it in, I turned on screen mirror and hooked my kb/m to the phone and everything, only to realize that the sound was also being streamed to the Chromecast.
Needless to say that my monitor doesn't have audio output.
So I got one of those HDMI audio diverter to draw the audio and feed it to my audio system, so far so good.
I used my laptop to game was well, so after starting some withdraw from games, I decided to grab my PS2 console and got on of those PS2 to HDMI dongles and play some old-school games, then I started facing an issue: swapping cables.
To fix that I got one of those 3 port HDMI hubs and plugged both devices to it.
However the monitor is 720p, the HDMI audio diverter knows that and replicates this information to it's input port which makes the Chromecast display in 720p.
But the hub does not, it report it's 1080p making the Chromecast send 1080p video signal and the display only shows a black screen because of it not knowing how to deal with that.
So if there's a way to force the Chromecast to display in 720p it would be my salvation.
So if anyone out there knows any possible solution, please, I would be really grateful.
Thanks everyone!