Hi,
i have a Big Problem. I was running Darkys Rom. And everything was Fine but I wanted to go back to Stock Rom beacause I want to sell the Phone. So I Flashed it to JPY. The Problem is when its boot the recovery menu says
E:Can`t mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:Can`tmount DBATA:
your storage is not prepared yet, please use UI menu for format and reboot options.
copy default media content failed.
What can I do ??
swifty112 said:
Hi,
i have a Big Problem. I was running Darkys Rom. And everything was Fine but I wanted to go back to Stock Rom beacause I want to sell the Phone. So I Flashed it to JPY. The Problem is when its boot the recovery menu says
E:Can`t mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:Can`tmount DBATA:
your storage is not prepared yet, please use UI menu for format and reboot options.
copy default media content failed.
What can I do ??
Click to expand...
Click to collapse
Flash JM8 or JM9 with ODIN. Then you got recovery e2. Go to recovery witg the 3 buttons conbo and wipe then reboot. Afterwards try to flash jpy again.
Related
i used speedmod-kernel-vI1_1-250hz-CWM on my galaxy s gt-i9000 and then i tried to flash it with a different kernel once i did this phone started to hang on the galaxy s screen.after that i flashed it with xxjpo using odin and when it was finished it rebooted to recovery i get the message
update media please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
then when i rebooted it from recovery the boot animation appears with the sound then after a while the screen goes blank.then the thing starts vibrating.help me to get this fixed guys.
lesithdx said:
i used speedmod-kernel-vI1_1-250hz-CWM on my galaxy s gt-i9000 and then i tried to flash it with a different kernel once i did this phone started to hang on the galaxy s screen.after that i flashed it with xxjpo using odin and when it was finished it rebooted to recovery i get the message
update media please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
then when i rebooted it from recovery the boot animation appears with the sound then after a while the screen goes blank.then the thing starts vibrating.help me to get this fixed guys.
Click to expand...
Click to collapse
did you have a lagfix enabled beforehand?
no speedmod is the first one
lesithdx said:
no speedmod is the first one
Click to expand...
Click to collapse
not kernel, lagfix. did you enable a lagfix in the speedmod kernel?
yeah i had the rfs converted to ext4
lesithdx said:
yeah i had the rfs converted to ext4
Click to expand...
Click to collapse
then that's what caused it. you should have disable your lagfix before flashing the new rom. i'm not 100% sure on this but i think you need to do a factory reset and reflash and repartion. maybe some more knowledgeable could answer that one though.
Maybe Ur other kernel not support ext4 filesystem.
reflash speedmod kernel and disable lagfix then flash Ur other kernel.
I've had the same problem. The pit file I used was wrong. I was using 513 instead of 512. Try reflashing eclair. And make sure the region is the same.
i disabled the lagfix before flashing the new kernel...anyway guys i got is sorted finally...i repartitioned and flshed XXJPO using odin...thank god it worked...thank you all for caring
lesithdx said:
i used speedmod-kernel-vI1_1-250hz-CWM on my galaxy s gt-i9000 and then i tried to flash it with a different kernel once i did this phone started to hang on the galaxy s screen.after that i flashed it with xxjpo using odin and when it was finished it rebooted to recovery i get the message
update media please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
then when i rebooted it from recovery the boot animation appears with the sound then after a while the screen goes blank.then the thing starts vibrating.help me to get this fixed guys.
Click to expand...
Click to collapse
Wipe data/cache
lesithdx said:
i disabled the lagfix before flashing the new kernel...anyway guys i got is sorted finally...i repartitioned and flshed XXJPO using odin...thank god it worked...thank you all for caring
Click to expand...
Click to collapse
I'm in the same boat. Is there any way you can help me?
I've flashed xxjpo using odin but still have the issue.
First, I set up the PIT using 512. Repartition, auto reboot a f restart all checked, the two below, not checked. Connect the phone, run it, disconnect the phone, pull battery, start into download mode again.
Next, I flash the pda with the xxjpo firware from the stock firmwares section here. I unchecked repartition, but left the other two, and I'm back at square one. Is there any way you can walk me through how you got back to a booting OS?
EDIT - See bottom of post - I solved it!
After trying out CyanogenMod, I decided to flash back to JL2 on my Bell I9000M.
Reading the directions to flash back it said just to flash using Odin with repartition. So I do so using the JL2 firmware from samfirmware.com.
After rebooting, however, I'm presented with the following:
update media, please wait
E: Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet. please use UI me
nu for format and reboot actions.
copy default media content failed.
Click to expand...
Click to collapse
Formatting and wiping using the recovery menu has no effect. Rebooting gets me to the "S" logo, but it just sits there and vibrates every so often after that. Reflashing has no effect, and I've tried using PIT files to no avail.
Any suggestions?
EDIT: I was able to flash hardcore's kernel and boot into ClockworkMod, and I formatted all the partitions there, but it still throws the same error.
EDIT: No need to respond to this. I figured it out, and I'll do a writeup on how I fixed it for those who may end up in the same predicament as me.
hi everyone...
desperately need help about my sgs...
i had js8 froyo and speedmod kernel 13 on my sgs.
i decided to go on gingerbread and install jvh with odin 512 pit re-part. checked
after that my tel didnt respond and on recovery mode it says
update media plesa wait
cant mount /dev/block/st110
(invalid argument)
e:copy_dbdatamedia:cant mount dbdata
your storage not prepared yet.please use UI menu for format and reboot action
copy default media content failed
recovery turned 3e btw.
i completely dont know what went wrong.
Need help!
Thank you
You have a gingerbread bootloader installed?
Any active lagfixes?
I had a similar issue after moving from cm7 back to stock-rom. This worked for me:
* flash only the .pit (no pda) with repartition ticked.
* go to downloadmode again and flash the rest (without repartition ticked).
Hi all
I have the Bell Samsung Galaxy S I-9000
I think I screwed up my phone by trying to put to an update the CSC using Odin
After rebooting, it was always rebooting to the recovery mode.
when I reboot the phone, the boot animation will come up but when it will try to go into the OS my phone will shake and my screen will go black and will shake every 10 sec
I tried to restore my phone with the previous Rom that I saved but no luck.
Tried to reflash with Odin the stock firmware but no luck
I found something on the forumt to use Odin and click the re-partition and have the 512 Pit file and reflash the rom but didn't work.
And also when I flash the stock rom it will reboot in recovery mode and give me this error message:
Update media, please wait
e:Can't mount /dev/block/stl10
(Invalid argument)
e:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet. please use UI me nu for format and reboot actions
copy default media content failed
=========================
Also I have tried to format the internal memory too and wipe data/cache
is their any other suggestion that you guys can suggest to do
Thanks
Paco
AHHHH false alarm I did something else and it worked
I did a flash with rom + pit + modem + CSC and I have put the option re-partition and the other 2 option in Odin
and now no more black screen
I had my rooted Galaxy S running well on CyanogenMod 10.1, but wanted to unroot so as to use my bank's app. While flashing Android 2.3.6 with Odin 1.87, I got various error messages and the phone boot looped. I tried to follow the instructions here , but the stock ROM I9000XXJVU_I9000OXAJVU_OXA.zip doesn't seem to be available now. Installing Semaphore CWM went OK, but of course the stock ROM has overwritten that. The stock recovery says:
E: failed to mount /dbdata (Invalid argument)
Copying media files...
E:failed to mount /dbdata (File exists)
E:cope_dbdatamedia:Can't mount /dbdata
your storage not prepared yet. Please use UI menu for format and reboot actions.
What stock ROM should I use that will deal with this? Or is there another solution?
Amphibian59 said:
I had my rooted Galaxy S running well on CyanogenMod 10.1, but wanted to unroot so as to use my bank's app. While flashing Android 2.3.6 with Odin 1.87, I got various error messages and the phone boot looped. I tried to follow the instructions here , but the stock ROM I9000XXJVU_I9000OXAJVU_OXA.zip doesn't seem to be available now. Installing Semaphore CWM went OK, but of course the stock ROM has overwritten that. The stock recovery says:
E: failed to mount /dbdata (Invalid argument)
Copying media files...
E:failed to mount /dbdata (File exists)
E:cope_dbdatamedia:Can't mount /dbdata
your storage not prepared yet. Please use UI menu for format and reboot actions.
What stock ROM should I use that will deal with this? Or is there another solution?
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=1640906
Amphibian59 said:
I had my rooted Galaxy S running well on CyanogenMod 10.1, but wanted to unroot so as to use my bank's app. While flashing Android 2.3.6 with Odin 1.87, I got various error messages and the phone boot looped. I tried to follow the instructions here , but the stock ROM I9000XXJVU_I9000OXAJVU_OXA.zip doesn't seem to be available now. Installing Semaphore CWM went OK, but of course the stock ROM has overwritten that. The stock recovery says:
E: failed to mount /dbdata (Invalid argument)
Copying media files...
E:failed to mount /dbdata (File exists)
E:cope_dbdatamedia:Can't mount /dbdata
your storage not prepared yet. Please use UI menu for format and reboot actions.
What stock ROM should I use that will deal with this? Or is there another solution?
Click to expand...
Click to collapse
You should factory reset and wipe cache and dalvik cache partitions. If else fails, try flashing a different stock ROM.
gsstudios said:
You should factory reset and wipe cache and dalvik cache partitions. If else fails, try flashing a different stock ROM.
Click to expand...
Click to collapse
Thanks guys. Meanwhile I managed to track down the XXJVU ROM and now have the phone up and running again on Cyanogenmod 10.2.1. But despite wiping cache and Dalvik cache, and factory resetting, it is still rooted! There is no Superuser app but #Superuser is still in the settings menu, and my bank's app reports that it won't work because the phone is rooted. Very odd. I suppose I'll have to try a different stock ROM, but why doesn't root disappear when flashing a stock ROM?