hey guys I can not find nothing on google, I was running nookie froyo and and pulled my sd card because im retarded now my nook is stuck on a black screen
how the heck do i pull the battery on this
edit the power of the n button and power button cured me
Related
Having an odd issue with my Nook (rooted with Auto-Nooker).
When I power it off, I cannot seem to power it back on with the power button, unless I plug the USB cable in first. Any ideas? Is this normal? Thanks.
I had problems the first couple of power ups, then is started acting normal.
I just got ny nook last night and when i tried to wake it up this morning i had to plug it in. I hope it fixes itself soon.
Sent from my NOOKcolor using the xda app
Silly question perhaps, but a few people have forgotten... Did you remove the SD card with the Auto Nooter image and reformat it? Otherwise it will boot into that every time you try to turn it on.
peiziyu said:
Silly question perhaps, but a few people have forgotten... Did you remove the SD card with the Auto Nooter image and reformat it? Otherwise it will boot into that every time you try to turn it on.
Click to expand...
Click to collapse
This was my problem as well until I did what you said. Thanks for the reminder!
I was having the same issue in the beginning. Even without the sd card inserted, I'd have that issue. It seems to be fine now, though.
Are we supposed to see the Nook color custom boot animation with the little android guy on the bottom right, though? I thought it was just part of the rooting/setup.
sano614 said:
I was having the same issue in the beginning. Even without the sd card inserted, I'd have that issue. It seems to be fine now, though.
Are we supposed to see the Nook color custom boot animation with the little android guy on the bottom right, though? I thought it was just part of the rooting/setup.
Click to expand...
Click to collapse
Everytime I have rebooted I have seen that boot screen, so it should be normal
I have taken my card out and reformatted it. My issue is more so when i leave my nook alone for a long period of time and it is just sitting in sleep mode. I have to hold the power button to get it to come back on(it reboots).
Sent from my NOOKcolor using the xda app
I think that is intended, pretty sure you had to push the power button for a second or two stock as well... reduce accidental power ons?
Seems odd, but I found a way to start up my Nook Color without having to plug in the USB. If I press and hold the Home button for a few second, then press the power button, it'll come on.
The custom logo is a standard part of the rooting process. If you don't like it, you can revert to the standard by moving or renaming /data/local/bootanimation.zip
My power button since yesterday only started working half the time. It will wake the nook but it wont turn off the screen... nootered of course. Ideas anyone? Alternatively if there's a widget i can get that will work too.
Sent from my NookColor
hmm
i noticed this laggy ness also
also when i hold down power for the TURN OFF SCREEN to come uip trying to CLICK power off can be hard sometimes... so weird...
solution
droidforums.net/forum/droid-general-discussions/21625-sleep-button-problem.html
I am running the flashable HC ver4 edition 2 on the emmc. I took the sd card out, and turned the power on. (stupid I know now, the NC looks to the sd card for a partition) It is now stuck, on a blank screen, except the word "Loading..." It won't shut off. I've tried holding the power button for a long time, with and without the "n" button. Any suggestions.
I've been folowing the dev forum for quite some time and done all sorts of mods to my Nook Color. The other day though, I was going to flash the OC kernel for nookie but when I powered it off and went to power it back on, nothing happened. No screen flash, no boot animation, nothing. It seems like the power button just stopped working. I even went as far as to take the back cover off, disconnect the battery, and manually short out the leads for the power switch with no luck. I dont really want to send it in for support because Nookie and HC are still on there and I dont want them to tell me they cant do anything so I figured I'd ask for advice first. Any help is appreciated!
A good test is to try one of the bootable SD options just to see if your Nook will boot at all. If it boots from SD but not emmc, search the forums for how to reflash /boot.
Hello guys, I am in need of some serious help, but please excuse me if I ask too many newbie questions.
I was running SlimROM on my Nook HD+ (I came back from running CM10.1>CarbonROM>SlimROM>CM10.1>SlimROM) and browsing the web late a couple of nights ago when the nook turned itself off. It rebooted itself and got stuck in the CM spinning logo for about 5 minutes. Since this had never happened to me before, i hard reset(held on the power button for long to force a restart) and now it is stuck on the Nook logo until the battery is fully drained. I tried rebooting it many times, while trying to force it into CWM recovery by pressing the vol down/vol down+home while turning it on. No effect, it just keeps showing the Nook logo.
So I brought out my SD card using which I had first installed CWM and CM upon receiving my new Nook HD+ and tried to boot from it. It starts up, shows the Nook logo, then goes on to Cynoboot Universal Bootloader logo for a few seconds, dims, then lights up again and gets stuck there. It then shuts down the Nook itself after a couple of minutes or so.
I brought this tablet with myself to Afghanistan, where I am currently stationed, so I cannot even go into a B&N store until my next R&R (not that I want to take an EMMC flashed Nook to B&N anyway). Please advise.
Am I going to have to buy a new tablet?
Thankyou very much in advance.
chr0 said:
Hello guys, I am in need of some serious help, but please excuse me if I ask too many newbie questions.
I was running SlimROM on my Nook HD+ (I came back from running CM10.1>CarbonROM>SlimROM>CM10.1>SlimROM) and browsing the web late a couple of nights ago when the nook turned itself off. It rebooted itself and got stuck in the CM spinning logo for about 5 minutes. Since this had never happened to me before, i hard reset(held on the power button for long to force a restart) and now it is stuck on the Nook logo until the battery is fully drained. I tried rebooting it many times, while trying to force it into CWM recovery by pressing the vol down/vol down+home while turning it on. No effect, it just keeps showing the Nook logo.
So I brought out my SD card using which I had first installed CWM and CM upon receiving my new Nook HD+ and tried to boot from it. It starts up, shows the Nook logo, then goes on to Cynoboot Universal Bootloader logo for a few seconds, dims, then lights up again and gets stuck there. It then shuts down the Nook itself after a couple of minutes or so.
I brought this tablet with myself to Afghanistan, where I am currently stationed, so I cannot even go into a B&N store until my next R&R (not that I want to take an EMMC flashed Nook to B&N anyway). Please advise.
Am I going to have to buy a new tablet?
Thankyou very much in advance.
Click to expand...
Click to collapse
I thought the normal way to get to recovery is to power up with the nook button held down? - have you tried that?
jazzy2fives said:
I thought the normal way to get to recovery is to power up with the nook button held down? - have you tried that?
Click to expand...
Click to collapse
Yes, i tried that first, then the vol down+power and then vol down+nook+power. I guess I was desperate, and searched everything remotely similar to the issue.
jazzy2fives said:
I thought the normal way to get to recovery is to power up with the nook button held down? - have you tried that?
Click to expand...
Click to collapse
That is not the way to boot to recovery. You boot to recovery from power off by holding BOTH power and n for like 5-8 seconds, releasing power first followed a few seconds later by releasing n. But be careful how long you hold power, if you hold it too long it will power back off.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
That is not the way to boot to recovery. You boot to recovery from power off by holding BOTH power and n for like 5-8 seconds, releasing power first followed a few seconds later by releasing n. But be careful how long you hold power, if you hold it too long it will power back off.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Yes sir, that's what I meant I tried. I have (successfully) force booted my way into recovery a couple of times before, but this time it is just stuck on the Nook logo (or cyanoboot logo if I power up with the CWM/CM SD inserted)
Wow. So many views on the post.
Guess the tablet is done for then.
Anyway, thankyou devs of CWM, CM and other ROMs who made my short journey with my first Android so very informative.
Would love to come back here when I buy my new tablet. I think it will be the new Galaxy note 10.1. Or the Nexus 10.
'Till then.
-
Chr0
I'm a real newbie to this stuff, so I may be talking rubbish and I'm not familiar with the ROM you were using, but is it possible you're emmc is damaged, for instance by trim. I know there are some people on the board running of special SDCard only roms, and some talk of possible ways to recover damaged emmc.
The reason I say this is it seems stuff is working up to a point, I think even the normal bootable SDCards and recovery partition probably try to mount some things from the emmc, and I wonder if this is where it's freezing up.