So, My diamond woke up me this morning, as usual. but problem...
my Diamond's screen didn't respond. and seems like under screen there is like vaccum. whole digitizer is pushed down, haven't had this kind of problem before. How can I get rid of that?
Last night things worked great.....
You can`t get rid of this problem. It`s a HTC known issue.
A friend who ownes a Touch Pro has the same problem. If he puts his headset to recharge during the night face down , it will cause the interior of the touchscreen to vacuum wich renders his phone operable , but without touchscreen capabilites ( for a short while ).
I replied thinking you left your phone face down during the night. If not , then my solutions is invalid.
well i left my phone charging whitout pouch onto glass table, so that screen was down.. yes the problem disappeared but about 2-3 weeks my phones screen was dead because here(in estonia) january s temperatures are as low as -30C and screen needed heat to come out of vaccum. it happens occasionally(never happened before). to conclude it I bought new screen and changed screen myself
Related
It have happened to me 3 times already, and I've only had my Diamond for 3 weeks...
When I leave my device charging over night, in the morning the display looks completely scrambled / distorted and the only thing I can do is a restart... Luckily it boots up normal again.
Am I the only one with this issue??
Btw... I've handled my phone with care & not ever dropped it or had it near any moisture, I guess this might be a harware issue!?
Dun worry owziee....
I having the same problem too.........
nothing but a white static/scrambled screen, right? Happens many time to me...the only thing i can do is re-insert the battery (holding the power button to restart doesnt work).
what about soft reset button ?
Sof reset fixes it. I think that the 3D chip is overheated, because it happens when I play sensory overload (a 3d game) too.
But strangely not when I play Call of Duty 2...?
Alteast we could get it back to normal with a soft-reset, kaiser had similar problem where only a hard-reset was possible after the same situations i guess..
Regards,
Carty..
i had a similar situation after i used my device to send a text, turned the screen off then turned it back on immediately, i had some strange screen with all different coloured pixels and it looked broke as hell, but i merely just pressed the power button on and off and it was fixed again :S
Yes i have the same problem and have no idea what is causing it. The most frustrating thing is when it happens my alarm does not go of... I would realy like a fix for this.
phew! It has happened once with me, and frankly it scared me a bit. Removed the battery and then it was Ok again. Weird behaviour. I don't think it has anything to do with heat tho.
I had the same issue too and I had to perform a soft reset fer it to work but after a week the touch screen of mine stopped workin no idea why i had to give to the service center fer repairs they told me it wud take a week to repair it rite now I am without a diamond
Something like the screen shots below?
I've had this problem for quite a while. If you disable Touchflo3d, you will not have this problem at all. This issue only concerns the 3d gpu.
I've since updated to v1.93 Olinex SPL and its more stable now, thou I still get it once a while, especially after a long period of not touching the phone (e.g. when sleeping).
Hi everyone!
Sad thing happend with me, 4 days ago i fell into a river and sadly ma diamond was in the pocket. I dryed it for three days, turned it on, everthing else works, besides the screen light. So i dissambeled the phone to bits and pieces, only i didn't took the LCD out(read it from somewhere that you can't put it back on afterwards so it will work). I reassambeled it and still same situation. If you look it from a angel you can see the icons and even touchscreen works. Only problem is still the backlight. So is there something i can do to make the backlight work again or i have to buy a new screen and is it hard to swap the screen ?
Hi,
Not sure if you will need to replace the screen, if you can get to the power settings you can see if the backlight has been manually turned down. If this fails and a screen replacement is required i will tell you how easy/difficult it is once i have replaced mine, due to unfortunate circumstances.
yeah, i got into the power settings, everthing is okey there like it should be , so i have to change the screen. Is there some kind on intrcutions for changing it? it would help me a lot
About a month ago I got my Kaiser screen replaced as it was broken, now all of a sudden the screen is all whitish and I can hardly ready whats on it!
Is the screen broken again??
I'm fixing to replace the screen in a Kaiser i bought used with a broken screen. From the reading i've done, it sounds like one of the cables to the screen is loose. Trying pressing on the middle of your keyboard and see if anything happens. The big ribbon cable has a connector there.
hmmmm coming to think of it when I pressed the middle of the screen it used to do some funny effect (like when you press your TFT monitor) but now nothing happens!
Is your screen something like this?
jrask said:
Is your screen something like this?
Click to expand...
Click to collapse
last night i was woken up by a text, i looked at my phone and all of a sudden the screen went crazy. Started scrolling up and down (like a bad signal/wrong format ntsc/pal on a tv). Everything got all messed up and lines and dashes all over, kinda like your screen, it started acting wierder when i began applying pressure on the top of the device by the earpiece and d-pad. So i soft-reset the device and it was still doing it while boot up, leading me to believe it wasn't a software issue.
So in my half awake state i just left it on my nightstand. I woke up and its perfectly fine now, even when i press all around the screen.. wierd huh?
I didn't notice anything like you descriped, touch screen and everything else worked like before. Only the colors were like on the picture. Tried hard reseting but didn't help. Phone is still under warranty so sent it to be repaired, i can post what they did when i get it back.
Thanks jrask. Thats exactly how it looks.
I think i have some bad news for you, the screen was damaged and needed to be replaced. I think it was cracked under the frame.
Hey guys, I was wondering if somebody would be able to maybe help me diagnose the fault\problem part with my non-working diamond...
Basically I went to a club one night and the place was unbelievably steamy / humid. My phone was working one minute and then the next it wouldnt display anything on the LCD. The backlight was working however.
Since then I havent been able to get an image on the screen although when trying to turn it on, it seems to go through its startup sequence (backlight -> vibration -> beep (i think))
I havent had any power to the phone since a day after it broke (a few weeks ago).
I'd like to get it back working again but dont know exactly what part i would need to replace. I'm fairly competent with electronics .
Any help/advite would be appreciated!
Haha, ok that's odd...
I've plugged it into my pc to get some data files off about an hour ago.. forgot about it and just looked at it now and the screen is displaying!
It is displaying and accepting input although it was flickering at first (like pixel shifting). but i pressed the power button to standby the screen and pressed it again and the display is fine with no flickering ?
Ive moved the phone about and shook it quite hard to see if there's any loose connection but the display still seems fine..
Anybody have any ideas as to what it may be?
I'm not going to deem it as fixed until I know what the problem was/is lol
cheers guys
Ok screen actually keeps flickering nonstop, and sometimes 'fades away' to gray/white/black
comes back after a few seconds though
Looks like a faulty connector?
well when im only using touch keyboard the corners and edges dont work
P,L Backspace, Go, The whole bottom, A, i
Its a common problem. I had the same. Unfortunately your touch screen is dying. Replace.
Sent from my Milestone using XDA App
Welcome to the club, apparently some people fixed it by warming their phone, putting it in rice, or replacing their digitizer.
i have another kind of problem: sometimes the screen begins it's own life, like somebody quickly touching it (solves with on/off button).
And sometimes i touch it in some point, but it thinks, that i touch it in another.
Disappointing, but not annoying.
well it seems to be working fine now
0667 said:
i have another kind of problem: sometimes the screen begins it's own life, like somebody quickly touching it (solves with on/off button).
And sometimes i touch it in some point, but it thinks, that i touch it in another.
Disappointing, but not annoying.
Click to expand...
Click to collapse
happens to me EVERY week
0667 said:
i have another kind of problem: sometimes the screen begins it's own life, like somebody quickly touching it (solves with on/off button).
And sometimes i touch it in some point, but it thinks, that i touch it in another.
Disappointing, but not annoying.
Click to expand...
Click to collapse
Got the exact same problem, send it for repair. Apparently they found corrosion in my internals, though I really have no idea how liquid got in there. There is no spillage or any sort happen to my phone.
Oh well that means goodbye to my Milestone and back to stone age for awhile.
I had this same problem a week ago, and it happened all day long. It happened that my screen was wet (don't ask me how, I don't know), and now it's working just fine
Well if your touchscreen are not responding well to your touch, or if you feel that a ghost has been playing around on it (eg. "like somebody quickly touching it"), then it's a symptom that the touchscreen is faulty and it's time to replace the digitizer or buy a new phone
I faced the same problem sometime. In this case, reboot the phone may fix this problem.
If it doesn't work, I think you have to replace the touch screen.
nowforever said:
I faced the same problem sometime. In this case, reboot the phone may fix this problem.
If it doesn't work, I think you have to replace the touch screen.
Click to expand...
Click to collapse
+1
Had one issue like this in 3 months, 1/5th from the top of the screen wouldn't respond anymore, no matter the program. The issue went away after rebooting the phone.
I am facing the ghost touch problem or the right side is not working at all. First time, it started on it's own but last night, while it was connected to the PC the nightmare began. I don't know what the heck should I do, because I don't have money to spend on new digitizer. Last time the problem was solved by letting the phone in a dry place (it wasn't dropped in water or so). I hope this time will work too... BTW, pressing the on/off button seems to fix the issues for ~3-4 seconds. Anyway, Moto sucks .
neato4u said:
Well if your touchscreen are not responding well to your touch, or if you feel that a ghost has been playing around on it (eg. "like somebody quickly touching it"), then it's a symptom that the touchscreen is faulty and it's time to replace the digitizer or buy a new phone
Click to expand...
Click to collapse
Are you sure this isn't the flex cable problem?
If it is the flex cable problem, where can be found to buy and replace? Because I am sure that is less expensive than replacing the whole digitizer.
I had the same problem, but it's more than a month that I recharge battery with a Samsung wall charger (700mAh power), it completely desappear.
One week ago I charged the battery with the USB cable and the problem reappear, desappearing only after a reboot.
It's NOT a flex problem for sure, our phone is very susceptible of current variations when charging. If the problem still remains after unplug and reboot, I suggest to try with another battery.