Database Develop

Screen issue-"Burnt in" image on gray backround

Hello people,
I rarely see a burnt in (like old crt screens) image on the bottom of the screen.
For example when I change the volume, the softkey labels of the today screen are still visible, along with a white line. Most times it is normal so I don't worry very much but I'm wondering if someone else has the same issue.
I've tried many versions of hardspl (because they seem to be connected with some screen issues) but the problem still exists.

Hi i have the exact same issue, i put a post up a month ago not had any response on it. I have a MDA compact IV, not updated any ROM or HARDSPL yet. I was tempted to update to see if the problem could be rectified.
Have you update to a cooked rom? I might send mine back to have it fixed if its a screen issue.
Mine only holds the "burnt in image" along the right of the screen from top right corner to bottom right corner around 3cm in.
Also i have noticed the "Burnt in image" seems to get stronger when the device heats up. If i use GPS or 3G, this seems to affect the screen.
My background is black which makes it really noticable, i think if i stick with the orginal t-mobile white background it's probably not that noticable.

mmm
Perhaps the units you bought where like demo units. Those units that are displayed all day long turned for people to look at them. I have read in another forum that perhaps that distortion is caused by extreme temperatures, cold or heat.

well i'm still trying to figure out what is causing it, as I notice it only once in maybe a week. Maybe temperature is the most probable cause. For me I notice the defect only in gray background (e.g. when changing volume or launching opera).
My unit was from the first batch from expansys (origin htc asia)

It's possible your handsets have screens which are somehow susceptible to heat damage from inside the phone. This would be no fault of your own, but a manufacturing defect.
I'd suggest returning the phone to the retailer, HTC or the operator depending on your situation.
However, if you're using the phone in extreme conditions, ie low temperatures, you may very well find the LCD slow to refresh or have some level of image retention.
Let us know the outcome

i also have a ripple effect when pressing, but its more apparent with black. its also a first gen model, so i think ima make a phone call to htc. maybe a can get a new device.

for the burn in, try this:
1. Go to power settings, deselect automatic backlight management.
2. Pull up backlight level to maximum.
3. Reselect automatic.
You should be ok!
If not, faulty device!

tnyynt said:
for the burn in, try this:
1. Go to power settings, deselect automatic backlight management.
2. Pull up backlight level to maximum.
3. Reselect automatic.
You should be ok!
If not, faulty device!
Click to expand...
Click to collapse
Ok I will try this although I can't see how the backlight can affect the screen. In order to repair it with warranty I would have to send it to expansys uk (because it is not a European device) and I bet it would take long

Have you tried removing the battery for a while - some lcd screens can get the memory effect, and cutting power for long enough normally cures it.

My phone actually holds the previous menu under the current menu.
Example i'm on the home screen, goto messages and send a text using the qwerty keyboard. Back to the home screen, i can see a very faint image of the qwerty keyboard under the Programs hotkey.
When the PIN lock comes on the bottom right is "MENU", i can see a faint "programs" letters icon underneath it.
I will try and leave the battery out for a few hours, if not a call to t-mobile!

ok, i have the same "problem". even after a soft-reset the words CommManager
and Programs are still slightly visible in the boot screen.
but: as mentioned above, turning the device off for a couple of minutes cures
this, and the screen is dark as hell again!
really seems to be some kind of memory effect!
regards,
markus

Left the battery out for a few hours, made no difference. I guess is not a software problem.
will be giving t-mobile a call tomorrow!

:-(
I guess every htc device must have a flaw...
when it does it again I will try to take a photo of it and post it here

Hi same problem here.... See my post below..
http://forum.xda-developers.com/showthread.php?t=417629
I thought it was due to Spb Shell but no, now i'm happy i'm not alone..
But what solution for this??
I'm not worried about the burn in looks.. My worry is whether this behavior of the screen will progressively damge the screen???
I have been using the Diamond at full backlight.. Last few days i've put it down to minimum, but the problem persists!!!

ok, I think it happens when it overheats.
So that is why it is caused when charging.
wtf?

No its not due to overheating, coz LCD screen are supposed to tolerate temperatures upto 80degree C... Dont know if its related to electro magnetic radiation, may be looks like it's more after i use the network...

Hi another mate has this problem Andrew...
http://forum.xda-developers.com/showthread.php?p=2684406&posted=1#post2684406

Hi,
i sent my phone back to T-Mobile hoping they will fix this issue with the screen. Just received the phone and it looks like they have done nothing On the job sheet all it says is "Software updated"? The problem is still there!
I dont think there is a fix as such, it looks like this is the cause
http://www.practical-home-theater-guide.com/image-sticking.html
I'll try if i can get a completely white background and leave the screen on for a while at the brighest setting, if this will erase the screen issue?

the problem appears more often now on my device....
It does not have to do with heat afterall.
Why would the image "stick" when the phone is off? I mean that many times I see the symptoms right after I switch the phone on.
Do we have any screen experts in the forum?

viperone88 said:
Hi,
i sent my phone back to T-Mobile hoping they will fix this issue with the screen. Just received the phone and it looks like they have done nothing On the job sheet all it says is "Software updated"? The problem is still there!
I dont think there is a fix as such, it looks like this is the cause
http://www.practical-home-theater-guide.com/image-sticking.html
I'll try if i can get a completely white background and leave the screen on for a while at the brighest setting, if this will erase the screen issue?
Click to expand...
Click to collapse
After calling up T-Mobile and made a complaint saying nothing had been done by the repair centre, they gave up and agreed to give me a handset replacement. Received the handset today, looks like a refurbed one? Anyway my problem is now fixed. Left the phone on a while and it got pretty hot, no ghosting on the screen
The restore was a pain, Wifi didn;t work, the HSDPA didn;t work. But after a few hours messing around it's all up and running so far.

Touchscreen Not Responding / Malfunction

I've been using my HTC Diamond for about 2 weeks now.
Bought it from www.plemix.com and it came unlocked , and I had no trouble at all using it and installing the HardSPL's / updating ROM (Dutty's Diamond v1.6) .
Today I ran the TomTom Navigator 7, and after a while it started to make continuous sound - the default sound when a button is pressed or touchscreen is tapped- , so I did soft reset a few times, didn't solve it, touchscreen was kinda jammed, and I took out the battery. A minute after I put it back, and it worked fine, I took some photos right after, and everything was working fine.
Then two hours later, I took out my phone from pocket to check the time, I see it's halted on the photo screen, and no response at all. So I just turned the phone off by taking out the battery, and just left it off until I came home.
Now the touchscreen is not responding to any taps or clicks, except that it seems that it still detects any sort of tap/click, because the backlight comes on from dim state when I try to tap it.
So it definitely means the touchscreen is not completely dead, but it's just not functional most part.
Hardware buttons works fine, but I'm stuck at the initial "Tap your screen to begin configuring your Windows Mobile" after hard reset. I even updated the ROM to Dutty's Diamond v1.8 just now.
Since I can't do anything and just leave it idle, it goes to [ Align Screen ] page, and still I can't press any cross, since the touchscreen is completely not responding.
Anyone had this screen death problem? Any method of solving it?
---Updated---
Just now the touchscreen worked for 30 seconds, i could actually align the screen, then it showed me the Date/Time setting page, where I could scroll the cities , but then it stopped working again. So i'm still at Date/Screen page...
--Updated--
The touchscreen works for 2 minutes after I do a soft reset / power on&off, or I should say, it works until you press some hardware key on the bottom (volume up/down buttons doesnt affect this).
After I press any of those buttons at the bottom, the touchscreen stops working.
Also, after I turn on the device, enters WM, and runs TouchFLO3D, for the entire time touchscreen works, it's constantly pressing the tasklist dropdown (upper right corner of the screen), making it constantly pop down the task list.

have you tried a hard reset?

Yes, like 3 times. Wiped everything, OS, ROM, NANDFlash.
Also updated the ROM from 1.6 to Dutty's 1.8 ROM. Everythingn works fine except for the Touchscreen.
Right now, when I turn on, the touch screen seems to be pressing all the time at the task manager part of the screen (where the [X] is), its popping up all the time the task list, then after a while, like say, 2 minutes, touchscreen again ceases to work.

Not really promising, but you could try to remove the screen-protector. Perhaps this releases any tension onto the screen.

Thanks. I've thought of that, maybe I'll try later on.
For now i'm suspecting that maybe water went in through, so I've put the phone upside down to maybe take out the water using gravity for 2 days.
It seems like it's working better now, with longer hours of normal functioning..
I'll wait and see one more night... if water is the cause of the problem, it should dry up in say 3-4 days.

It may sound strange, but pit it face down on the carpet and rub it around for a while. Its how I fixed mine. Don't ask me why it works but I had the same thing happen. I think somehow the electrical charge got dissipated from the screen and the static from the carpet recharged it.

Actually your words makes a lot of sense
My Diamond was acting completely alright today, used GPS for 2 hours and called a few people along with many weather updates.
Seems to be working fine now...
But I think what you said is pretty reasonable, since when I rubbed my dead screen , after a few rubs it started to work (2 days ago).
Thanks

yeah this had happened to me about a week ago exactly the same thing I had hardspl mine and updated radio to .05 and then a few days after I had the identical problem. However I took a shortcut and sent the phone back in and requested a replacement claiming it was defective they agreeded and sent a new one however this one already has .05 radio on it so I didn't have to hardspl it. I can't say any of these things would have worked form me as I did not try them byt symptoms are identical. my .02

Problem - no display on my Xperia

I have lost my display on my Xperia phone.
The back light comes on -- but that is it -- NOTHING else.
Has anyone else experienced this and more importantly - fixed it ???
if so, what did you do

What have you tried to fix it? I'd say something like this goes in order;
1. Soft Reset (since you don't have a display, use the reset button next to the battery)
2. Hard Reset (hold both hard buttons while pushing the reset button with the stylus)
3. Call someone, either your carrier or SE.

I have the same issue.
About 2 weeks ago issue started.
Waking from sleep or turning on, backlight lights up, but screen is blank.
This is starting to happen more frequently. Sometimes it will work normally, but more and more it is just staying blank.
Also during normal use, screen will become "garbled." Random bits of the screen move around to other parts.
Even during these problems the phone is functioning normally, can even push the buttons on the touch screen even though they are not being displayed.
I have an x1i, hard-spl. Was previously flashed with TouchX 10.1. When issue started happening, I flashed with a newer itje WM6.5 ROM. Same problem.
Issue of screen being blank also happens when booting to the tri-colour screen.
Any ideas?

I had the same issue screen just refused to display. I sent it back to Sony E for repair. They repaired and returned within 7 days. On the repair bill they stated it was a loose connection.

Interesting, hopefully that's it.
Out of curiousity, what was the repair worth?
Just wondering how much i'm up for if that is the case and I send it back.

lonneclark said:
I have lost my display on my Xperia phone.
The back light comes on -- but that is it -- NOTHING else.
Has anyone else experienced this and more importantly - fixed it ???
if so, what did you do
Click to expand...
Click to collapse
Yeah.. I know this topic is pretty old, but I exactly have the same problem..
I have the Xperia X1 or about 1 year and a half now, everything was working fine until 2 days ago:
1. If someone calls me or I call them, they don't hear me, but I DO hear them
2. Screen responds, but remains blank (backlight only turns on)
3. Screen shows once in a while, but it pixelates.
I'm thinking of a hardware problem here, anyone knows more about this?
- Tried rebooting > no effect
- Tried soft reset > no effect

In most of all above problems it would be becouse of damaged lcd flex cable. It's not cost too much but you will have to disassemble phone and change it. http://cgi.ebay.co.uk/for-Sony-Eric...ries_MobilePhoneBatteries?hash=item563a472301

[PROBLEM] Died?

Hey guys, I was wondering if somebody would be able to maybe help me diagnose the fault\problem part with my non-working diamond...
Basically I went to a club one night and the place was unbelievably steamy / humid. My phone was working one minute and then the next it wouldnt display anything on the LCD. The backlight was working however.
Since then I havent been able to get an image on the screen although when trying to turn it on, it seems to go through its startup sequence (backlight -> vibration -> beep (i think))
I havent had any power to the phone since a day after it broke (a few weeks ago).
I'd like to get it back working again but dont know exactly what part i would need to replace. I'm fairly competent with electronics .
Any help/advite would be appreciated!

Haha, ok that's odd...
I've plugged it into my pc to get some data files off about an hour ago.. forgot about it and just looked at it now and the screen is displaying!
It is displaying and accepting input although it was flickering at first (like pixel shifting). but i pressed the power button to standby the screen and pressed it again and the display is fine with no flickering ?
Ive moved the phone about and shook it quite hard to see if there's any loose connection but the display still seems fine..
Anybody have any ideas as to what it may be?
I'm not going to deem it as fixed until I know what the problem was/is lol
cheers guys

Ok screen actually keeps flickering nonstop, and sometimes 'fades away' to gray/white/black
comes back after a few seconds though

Looks like a faulty connector?

[Q] Phone works, screen does not yet sometimes it does

Hello
One night I was using the phone without doing anything special , some video watching . Phone went dark, tried to reboot. Blank Screen and the capacitive buttons flash. Left it to charge all night, in the morning it started but after I pressed the lock button blank screen but phone still working and receiving input.
Took the battery and SD card out left it for 30 seconds then started it again, Stuck at LG logo. Repeat , phone started ... Pressed lock button once then again to unlock , screen wouldn't start.
Used LG Mobile Update recovery tool to restore it ... Didn't solve problem. Sometimes it does not even start , just flashes buttons, other times it does without screen and last all works even the screen until first time goes dark , in the last two cases I can use LG On-Screen Phone without trouble, in doing so I installed a proximity sensor test app to see if it was causing my screen to not come back on , the sensor looked fine.
Facts:
1. Two day old Optimus Black p970, worked like a charm until stated problem
2. The app that checked proximity sensor showed the sensor to be free when my hand wasn't on it
3. The warranty laws in my country are idiotic so I would do or buy anything rather than send it so they can give me a new one in 3 months.
4. Tried another battery from another Optimus, fully charged nothing different.
5. Stock rom.
Do any of you fine people have some ideas on how to fix this? Thanks in advance

Hi there...
Sometime ago [1 year and a half or so~] I worked at a cell refurbishing facility [there were samsung, motorola and palm devices from sprint] and that problem you have was quite usual. Blank screen, still the phone is somehow usable like reciving calls...
There's this thing called "flex" which is the connector between board and display and that is what we fix, most of the time not even "fix it" just getting it in the right place...
This happen because of excesive use in those sliding or clamshell devices, in OB could be for overheating, you could try to fix it yourself or pay $20 usd [that's what it cost here]

Would that connector explain the fact that sometimes it doesn't start at all? hmm I am thinking now and I guess if it moves and somehow the phone feels it has not display connected it could fail to start... Anyhow thank you

actually yes, it could be only for the flex [some devices don't start at all when not having display or keyboard if there's any] but since our OB is not sliding nor clamshell type probably was overheating.
you say you have stock rom, well now I'm using CM7 but when I was at stock and after using the phone a few minutes it felt warm and some more minutes [like playing gunbros where you need to use both hands and a lot of movement] it was really hot and had to stop playing for a while.
what I'm trying to say is that because of overheating flex could have moved, but because of overheating too may have move something else, you couldn't belive the huge number of micro-things that reside in the board.
so if it's only the flex, it's an easy task to do, just unplug and plug again, but if it's something else it's quite hard to know just looking at it, you need to do some electric measures and stuff, the recomendation is to take it to a tech center or something

Hi. I Have same issue. Two times when i press power buton, butons flashing and screen still black. Phone not responding. I must remove baterry.
Sent from my LG-P970 using Tapatalk

Hi there, got the same problem too with my optimus black. Screen goes flickering, shut down don't do any good, and the phone temperature is kinda hot. But in my case it work after I clean some cache and data in the phone storage through LG OSP. After that, the phone temperature back to normal and the phone screen back to normal also. I believe that in my case the phone is overheated.