Download link: http://goo.gl/vzEB4
FAQs: http://forum.xda-developers.com/showpost.php?p=11436660&postcount=11 (Thanks Alienz!)
Yes, the kernel is still based on the i9000 JPX source release. Hopefully we get real source soon.
Main Features:
NEAR STOCK BATTERY!!! (Thanks Morfic!)
Overclock up to 1.4Ghz.
BLN (Backlight Notifications).. A basic app is included to turn it on if you want it
Voodoo lagfix v5
Voodoo Sound v4
Many parts of the "speedmod" patch from the i9000 forum
OC is based on raspdep's OC patches, also from the i9000 forum
Various speed tweaks
CIFS/SMB and NFS support compiled in (no modules)
Tunnel support compiled in (no modules)
Changes since 3.2:
New boot logo. (Thanks Alexia!)
Added battery drain fix in standby discovered by Morfic. Should be about the same battery as stock now.
Voltages and frequency scaling have been adjusted to more quickly jump to higher frequencies and come down slower. Improves response time while you use the phone.
The Voltage Control app has the correct voltages, I recommend leaving the lower speeds alone to start with. Going too low can cause the sleep of death. That's why they are as high as they are. NOTE: The voltage control app does not control the available states they way the older ones do. That screen is useless, ignore it. Set your max and scheduler if you wish, and the voltages if you want to change them.
SetCPU.... If you want to use it, you can have it set min/max. If you set profiles, don't set the max under 800. The phone needs 800 to be available. I use a screen off profile at 100-800 just to keep the OC disabled while sleeping. No reason it should need to really crank up the speed if I'm not looking at it. SetCPU is NOT required, I'm offering this as a tip for fans of that application.
The kernel has proven stable for a number of testers so far. If you get crashes, disable any OC/UV settings and try again. I recommend you only change one setting at a time, and NOT set at boot until you have run for a while to ensure you can run stable at that voltage/speed.
Great job testing it out now. Edit: screen is a little dark but the kernel is super smooth
Sent from my SGH-T959 using XDA App
Going to test! Will post results in a couple of hours.
onix
I am considering flashing this new kernel but have a couple of questions I would like to ask first. I am currently on Bionix V 1.21 and love it. Is this kernel compatible with Bionix V 1.21? It appears that this kernel is Voodoo enabled so I presume I would not have to disable voodoo. If I decide to go back to the Kb1 with voodoo enabled which I believe is the stock kernel for Bionix V 1.21 would i just flash the kernel( is is available on TW forum?)or would I have to flash the whole rom again? I would think I would not have to but want to be sure before I leap. I would not like to have to ask for help for problems that could have been avoided by reading and asking questions. Any and all help is greatly appreciated.
Is it ok to not use set cpu? Will this kernel will oc over 1000?
ttabbal said:
Download link: http://goo.gl/vzEB4
Yes, the kernel is still based on the i9000 JPX source release. Hopefully we get real source soon.
Main Features:
Voodoo lagfix v5
Voodoo Sound v4
Many parts of the "speedmod" patch from the i9000 forum
OC is based on raspdep's OC patches, also from the i9000 forum
Various speed tweaks
CIFS/SMB and NFS support compiled in (no modules)
Tunnel support compiled in (no modules)
Changes since 3.2:
New boot logo. (Thanks Alexia!)
Added battery drain fix in standby discovered by Morfic. Should be about the same battery as stock now.
Voltages and frequency scaling have been adjusted to more quickly jump to higher frequencies and come down slower. Improves response time while you use the phone.
The Voltage Control app has the correct voltages, I recommend leaving the lower speeds alone to start with. Going too low can cause the sleep of death. That's why they are as high as they are. NOTE: The voltage control app does not control the available states they way the older ones do. That screen is useless, ignore it. Set your max and scheduler if you wish, and the voltages if you want to change them.
SetCPU.... If you want to use it, you can have it set min/max. If you set profiles, don't set the max under 800. The phone needs 800 to be available. I use a screen off profile at 100-800 just to keep the OC disabled while sleeping. No reason it should need to really crank up the speed if I'm not looking at it.
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
This kernel is much more stable for me than the dow kernel. Great work.
tenbeau said:
I am considering flashing this new kernel but have a couple of questions I would like to ask first. I am currently on Bionix V 1.21 and love it. Is this kernel compatible with Bionix V 1.21? It appears that this kernel is Voodoo enabled so I presume I would not have to disable voodoo. If I decide to go back to the Kb1 with voodoo enabled which I believe is the stock kernel for Bionix V 1.21 would i just flash the kernel( is is available on TW forum?)or would I have to flash the whole rom again? I would think I would not have to but want to be sure before I leap. I would not like to have to ask for help for problems that could have been avoided by reading and asking questions. Any and all help is greatly appreciated.
Click to expand...
Click to collapse
Im not sure if you have to disable voodoo or not .. probably not but don’t take my word for it and no you do not have to flash the whole rom again, just the kernel. Thanks for not clogging up the forums. Lol I know its hard to ask questions in the vibrant forums, (cause you'll get beaten to death with mean comments) but ask them anyway, someone will answer eventually. Ignore the whiny, ungrateful 2 year olds that somehow wandered onto this forum...
Sent from Bionix powered vibrant! If I helped, hit the thanks button!
I flashed without disabling voodoo
treyvaporizer said:
Im not sure if you have to disable voodoo or not .. probably not but don’t take my word for it and no you do not have to flash the whole rom again, just the kernel. Thanks for not clogging up the forums. Lol I know its hard to ask questions in the vibrant forums, (cause you'll get beaten to death with mean comments) but ask them anyway, someone will answer eventually. Ignore the whiny, ungrateful 2 year olds that somehow wandered onto this forum...
Sent from Bionix powered vibrant! If I helped, hit the thanks button!
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
tenbeau said:
I am considering flashing this new kernel but have a couple of questions I would like to ask first. I am currently on Bionix V 1.21 and love it. Is this kernel compatible with Bionix V 1.21? It appears that this kernel is Voodoo enabled so I presume I would not have to disable voodoo. If I decide to go back to the Kb1 with voodoo enabled which I believe is the stock kernel for Bionix V 1.21 would i just flash the kernel( is is available on TW forum?)or would I have to flash the whole rom again? I would think I would not have to but want to be sure before I leap. I would not like to have to ask for help for problems that could have been avoided by reading and asking questions. Any and all help is greatly appreciated.
Click to expand...
Click to collapse
It is compatible with Bionix 1.2.1, that's what I developed it on.
If you have the red voodoo recovery, there is no need to disable voodoo for flashing. Generally speaking, kernels can be flashed without disabling voodoo in any case.
This is what iv'e done, I've lowered my Volts on some clocks, 1000 and up, and I was wondering should/can I use setcpu for profiles?
Answers to COMMON questions:
1. Can I flash this over Voodoo or RFS (stock)
You do NOT need to disable Voodoo. Flash right over Voodoo or RFS kernels. Make sure you are not running JFS though. JFS is not supported
2. How is stability? Does it crash? Sleep of death? etc?
Stability on this is AMAZING. It will not crash unless you overclock/undervolt and your settings are unstable. If that is the case, you know its your settings.
3. Do I need SetCPU to overclock?
You do not need to use SetCPU (You can if you want to). Use the Voltage Control App to overclock.
4. How do I overclock? Can I use this without an overclock?
By default, the kernel will boot to 1.0Ghz. To OVERCLOCk to 1.4Ghz (or lower) you need to use the app that this kernel installs during the flash. The app is called "Voltage Controll" and can be found in your app drawer after the flash
5. What is the battery life?
Battery life should be close to stock now. The battery drain issue that was present in the I9000-based kernels earlier has been solved.
6. Does this support BLN (Back-light-notificaations)?
Yes. You need the BLN control app from the market to use it.
7. How do I use Voodoo sound? What is it?
Voodoo sound is a vast improvement to the sound quality of your phone. To use it, download the Voodoo Control app from the Market.
8. What ROMs is this compatible with?
This is compatible with ALL Vibrant Froyo ROMS. This means 2.2 ROMS made for the Vibrant. 2.2.1 is not yet tested but should theoretically work.
I hope this helps.
ttabbal said:
It is compatible with Bionix 1.2.1, that's what I developed it on.
If you have the red voodoo recovery, there is no need to disable voodoo for flashing. Generally speaking, kernels can be flashed without disabling voodoo in any case.
Click to expand...
Click to collapse
Thanks so much for your kind and patient and swift reply. Donation just made. I really admire yours and all of TW generosity and patience with noobs like me. I am flashing the kernel now. Thanks again for sharing your brilliant work!!!!!!!!!!!!!!!
cashyftw said:
This is what iv'e done, I've lowered my Volts on some clocks, 1000 and up, and I was wondering should/can I use setcpu for profiles?
Click to expand...
Click to collapse
You can use setcpu for profiles, just keep 800Mhz available. The phone will likely crash if you don't. I set a screen off profile of 100-800 to keep the oc disabled when I don't need it, as 800 is a lower voltage.
Hint with voltages, try to keep 1000 and higher at the SAME voltage. Changing the voltage too often can cause instability as the voltage regulator doesn't adjust as fast as we would like sometimes. OC makes this worse as you need a higher voltage to maintain a stable CPU at the higher frequency. The kernel is set to jump to 1000, then to the max set clock speed. Setting 1000 to the higher voltage gives us some extra time to stabilize the new voltage before the just into the OC speeds.
tenbeau said:
Thanks so much for your kind and patient and swift reply. Donation just made. I really admire yours and all of TW generosity and patience with noobs like me. I am flashing the kernel now. Thanks again for sharing your brilliant work!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Thanks for your kind words and the donation. I'm glad you find my work useful.
just flashed this..
and a few questions ive never used OC before..
What does VOODOO Sound really do?
I set my thing on SetCPU as 1.4ghz as max and .1 as low with conservative.
then a profile with screen off and on conservative.
will those save battery?
xriderx66 said:
just flashed this..
and a few questions ive never used OC before..
What does VOODOO Sound really do?
I set my thing on SetCPU as 1.4ghz as max and .1 as low with conservative.
then a profile with screen off and on conservative.
will those save battery?
Click to expand...
Click to collapse
SetCPU by itself will NOT overclock. You need to use the Voltage app that comes with the kernel. See my above post with the Common questions.
I'd like any of the kernels developers gave me a clue about an issue im having with all custom i9000 based kernels (eugene's and TW's). The problem is with line2 voip app which calls isn't heard in the other end when running these kernels, but in stock/voodoo it works just fine. Please any of you have an idea of what could be going wrong?
thanks.
Okay tested so far, everything is working good (undervolted to about 175 for lower clocks 100-1000 and 75 for higher clocked 1200-1400)
Don't try this, as every phone can't handle some things, i'm just stating.
EDIT: I'm seriously stupid, how do I remove the settings again? I know it's in system/ something
Edit: NEVERMIND fixed
I've never used an OC kernel, was thinking of giving it a try. If I decide its not for me is this like removing a voodoo injected kernel, disable, then flash a diff kernel then delete files?
kcp877 said:
I've never used an OC kernel, was thinking of giving it a try. If I decide its not for me is this like removing a voodoo injected kernel, disable, then flash a diff kernel then delete files?
Click to expand...
Click to collapse
Just flash other voodoo kernel on top of it no need.to.disable voodoo
Sent from my SGH-T959 using Tapatalk
Related
What are the reasons for trying different Kernels? I have Flashed to Darky's 7.5 and I am not big into playing games on my phone just basic Calling,Texting some simple games. Are there some Big advantages I could benefit from if I OC/UV with different Kernel?
Thanks
RonH54 said:
What are the reasons for trying different Kernels? I have Flashed to Darky's 7.5 and I am not big into playing games on my phone just basic Calling,Texting some simple games. Are there some Big advantages I could benefit from if I OC/UV with different Kernel?
Thanks
Click to expand...
Click to collapse
Overclocking will make the phone faster and undervolting will give you better battery life as you crank up your processor speed but both can mess with your phone as you get toward extremes on both ends. Overclock too much and your phone goes crazy. Undervolt too much and you get sleeping death and stuff like that.
With the type of user you are I would recommend xcal's kernel, a 2.2.1 rom and do not enable the lagfix, which I believe Darky's rom fits the bill. You will not notice a difference in performance and you won't have to deal with an issues relating to oc/uv. If you are a hardcore gamer then you might need to oc but I play asphalt 5 all the time with neither and never have any issues with lag or stutter.
Roof King said:
Overclocking will make the phone faster and undervolting will give you better battery life as you crank up your processor speed but both can mess with your phone as you get toward extremes on both ends. Overclock too much and your phone goes crazy. Undervolt too much and you get sleeping death and stuff like that.
With the type of user you are I would recommend xcal's kernel, a 2.2.1 rom and do not enable the lagfix, which I believe Darky's rom fits the bill. You will not notice a difference in performance and you won't have to deal with an issues relating to oc/uv. If you are a hardcore gamer then you might need to oc but I play asphalt 5 all the time with neither and never have any issues with lag or stutter.
Click to expand...
Click to collapse
Thanks for reply. I just love to tinker with things so though I will probably not fool with changing Kernel now I am sure I'll get the itch and try it once to see how I like OC and UV at some point......
Thanks again
I would suggest glitterballs kernel, it is based on 2.2.1 source, uses voodoo which you can choose to disable, and is oc to 1200 but you can opt not to oc. I find it to be very stable
Sent from my SGH-I897 using XDA App
mcord11758 said:
I would suggest glitterballs kernel, it is based on 2.2.1 source, uses voodoo which you can choose to disable, and is oc to 1200 but you can opt not to oc. I find it to be very stable
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I am getting ready to Flash Darky's 7.7(I have 7.5 now). I think I read that 7.7 has Voodoo enabled when you Flash(before you had to Disable Lag fix to get Voodoo). Will glitterballs kernel work with 7.7 and Voodoo already installed? Also is this the the glitterball you talking about?
http://forum.xda-developers.com/showthread.php?t=887315
Thanks
Speedmod kernel that just came out is good and snappy. Its a battery sipper too!!! And no OC/UV.
silverslotcar said:
Speedmod kernel that just came out is good and snappy. Its a battery sipper too!!! And no OC/UV.
Click to expand...
Click to collapse
I have read that a lot of guys really liking Speedmod but if I read correctly you can't have Voodoo running and Voodoo runs with Darky 7.7 Flash automatically. I am sure there a way to disable Voodoo in 7.7 I just need to find out how. Or I can be completely wrong about SpeedMod and Voodoo.
RonH54 said:
I am getting ready to Flash Darky's 7.7(I have 7.5 now). I think I read that 7.7 has Voodoo enabled when you Flash(before you had to Disable Lag fix to get Voodoo). Will glitterballs kernel work with 7.7 and Voodoo already installed? Also is this the the glitterball you talking about?
http://forum.xda-developers.com/showthread.php?t=887315
Thanks
Click to expand...
Click to collapse
Yes that is the kernel I was talking about
Sent from my SGH-I897 using XDA App
I am proud to announce Savage-Kernel to the xda forms. Currently in beta testing we worked from the latest invisiblek kernel newly undervolted, HAVS with the SBC mod.
JUST FOR @PonsAsinorem:::::: DISCLAIMER!!!! IM NOT RESPONSIBLE FOR BRICKING YOUR PHONE... EVEN THOUGH THE KERNEL CANNOT BRICK A ROOTED PHONE UNLESS YOU FLASH A BAD RECOVERY..... DON'T MODIFY THE UPDATER-SCRIPT TO FLASH THIS TO YOUR RECOVERY!!!!!! .... ALL CHANGES TO THIS KERNEL STILL MEET THE MINIMUM SPECS OF THE INC.... UNLESS YOU OVERCLOCK... WHICH IS UNDERVOLTED... WHICH IS RUNNING AT THE STOCK VOLTAGE AND SHOULDN'T HARM YOUR PHONE ANYWAY.
SENSE BASED ROMS NOT SUPPORTED THIS IS FOR AOSP ROM'S ONLY
So far the Kernel works great in conservative governor. which all the devs prefer.
Devs:
jsseidel1 (co-creator)
luisrcastillo (co-creator)
ms79723 (SBC mod updates)
lithid-cm (contributer. Updater-script guru)
Credits:
invisiblek--> base kernel!!
ms79723 --> the SBC mod.
netarchy --> smartass gov
intersectRaven --> HAVS
(credits are given to the dev's where we got some code from, may no be original designer)
CFS Builds:
Alpha1 : Click Here to download
Stable v1 : Click Here to download
BFS Builds:
Follow the github on twitter @evokernelsrc
If you like our kernel and want to support us... donate (no obligation)
Change log
Code:
[B]Alpha 1[/B]
Undervolted to 925
HAVS implemented configured for conservative
smartass added for fans
SBC Mod added (trickle Charging)
Enabled OC to 1.19 and stable
conservative governor tweaks
HAVS tweaks
smartass governor tweaks
voltage tweaks
BFS360 (latest version) and CFS VERSION!!!
Added SBC v7
BFS tweaks to ondemand gov
tweaks to interactive gov
bad ass CFS tweaks!!!!!
aggressive swap drop
misc tweaks
[B]Stable v1[/B]
SBC v7 ported from Evo (better battery life, this is a HTC mod so doesnt matter that it came from Evo)
FAQ's
All answers are based off latest stable build
Which governor should I use?
Use Conservative for best battery, if you get any lag or choppy or shutter switch to either Smartass or interactive.
Which governors are tweaked?
Conservative and Smartass
I'm running smartass and having screenwake issuesm what do I do?
We suggest you set up a screen off profile of 245/384 to avoid the wake issue.
Have any more? Just ask!!
jsseidel1 said:
All answers are based off latest stable build
Which governor should I use?
Use Conservative for best battery, if you get any lag or choppy or shutter switch to either Smartass or interactive.
Which governors are tweaked?
Conservative and Smartass
I'm running smartass and having screenwake issuesm what do I do?
We suggest you set up a screen off profile of 245/384 to avoid the wake issue.
Have any more? Just ask!!
Click to expand...
Click to collapse
What kind of battery life are you getting with this? I know results vary, but just curious.
Sent from my ADR6300 using XDA App
excited to try this
jsseidel1 said:
All answers are based off latest stable build
Which governor should I use?
Use Conservative for best battery, if you get any lag or choppy or shutter switch to either Smartass or interactive.
Which governors are tweaked?
Conservative and Smartass
I'm running smartass and having screenwake issuesm what do I do?
We suggest you set up a screen off profile of 245/384 to avoid the wake issue.
Have any more? Just ask!!
Click to expand...
Click to collapse
How did you determine that conservative is the most power-friendly?
I would post a disclaimer about the SBC mod.
Sent from my ADR6300 using Tapatalk
Am I missing the link here or has it not been posted yet? I'm excited to test.
Guys, SBC *really* isn't good for the battery. Li-Ion batteries aren't designed to use trickle charging. IMO this will kill the batteries faster and isn't worth the extra charging.
waiting to try this... dont think it will hurt my battery in the short run... who keeps phones longer than 2 years anways?
True. I've gotten better battery life off of it, but I feel like my MIUI build recently has been getting worse due to the SBC mod.
Works on gingerbread roms?
Sent from my ADR6300 using XDA App
If it's AOSP, it should, but sometimes I've gotten weird reactions using kernels that are claimed to work on all AOSP ROMs (Kingx Kernel + MIUI = no-no. Also, MIUI + Hydra = no-no).
Point being, we should probably get this clarified. I've seen instances where people have lost touchscreen functionality (though usually that's due to a failure to wipe cache/dalvik) among other issues. Until we field test this on GB ROMs or until the OP states that it works on them, we should probably refrain from flashing it over a GB ROM. You can do it if you want, I'm in no way trying to make you turn away from it; I'm just saying take it with a grain of salt.
Plus there's the SBC issue to worry about; trickle-charging has negatively affected the battery performance of my MIUI ROM, so I'm going to switch kernels whenever I go back to it. Better charging in the short run < not needing to buy new batteries in the long run (and therefore saving money).
link??????
*sigh*...
Ok, clearly I need to start citing the comments I make. Here you go:
http://forum.xda-developers.com/showthread.php?t=885476&page=25
The first post on this last page pretty much sums it up (actually, read 23-25 to sum up the main issues, it also has links to OTHER posts talking about the issues), but if you want other chronological examples of touchscreen failure or other issues you can read examples from pages 2, 5, and some places past page 15. SBC is bad news on its own, and adding overclocking to it just makes it worse. Again, you can use the kernel if you want, I'm not gonna stop you, I'm just saying that there have BEEN problems with it on other AOSP ROMs. MIUI seems to take pretty well to SBC in terms of battery, as I've seen; but, it's been getting worse as of late. UltimateDroid had a touchscreen failure (page 5) in v1; I don't believe that's been fixed yet, but feel free to correct me. MIUI had a touchscreen failure in v2 (though I think there might have been a bad flash involved, because I flashed SBC to my MIUI 12.24 at the time and it worked fine), cited page 23. Need I go on? Lol.
Point is (I've said that a lot, I know) that it does damage, multiple AOSP ROMs are getting touchscreen failure, and there's more harm than good that comes out of it.
Read: http://www.ziggy471.com/2011/01/02/overcharging-batteries/
That's a good link also. It's actually in the thread I posted, but its equally as important if not more important than my post. Good job man XD
Sent from my HTC Incredible running Carbonite Red 1.5.
Ok you all need to relax. SBC does not over charge your battery. The trickle charging is essentially the battery staying at 100% while on the charger. Lithium ion batteries have tech built into them to protect from over charging and such. SBC just means when you take it off the charger it will really be at 100%. You can't over charge aanyway. This kernel allows you to overclock but it doesn't force it. You need to choose overclocking yourself in setcpu. ... and 90% of the kernels in this forum have SBC they just either don't say it or they call it the battery fix. You can see it in their gits. On the evo forums we just call it SBC. Ill be posting the kernel today. If you don't want to use it. Then don't. It was just requested that I port my evo kernel over to the Inc. So I am.
Sent from my PC36100 using XDA App
gmichaelow said:
How did you determine that conservative is the most power-friendly?
Click to expand...
Click to collapse
Conservative by nature is more power friendly as it only ramps up the processor as requested then brings it right back down to your min.
The way we have set our Governor is to optimize the Conservative Governor to get the most speed stability and battery life out of your phone.
I just got a config from one of your rom dev's to build the kernel so this should be posted by tomorrow.
I for one appreciate what you are doing. There is nothing wrong with having a variety of kernels to choose from. If you disagree with what this dev is doing, then use another kernel. We don't need to be running them off.
Sent from my ADR6300 using XDA App
Hello to everybody who has taken the time out to help me with my question!
Thanks to the devs also that make this happen.
Ok i have been elsewhere since i have gotten my UK gt-i9000 (playing with cfw on ps3)
i have since returned and thought i would give it a go.
i would like to know what kernel i can use which will push my i9000 to the highest oc frequencies as i am only finding kernels that are limited.
either a kernel with no limit to oc
or mabey a the highest known kernel
Thanks for your help guys
Don't mind helping you out here
KERNEL][VoodooSnd4-VSF-OC-TRCU-BFQ-ZRAM] Super Optimized Kernel 4_8_1 STABLE [02-28]:
OC frequencies (1200-1300-1400-1500-1600)
this is the highest possible as far as I know.
if you want true speed in 3d games go for darky 9.4 with damiangto
his new beta kernel can go to 1280, which should be enough for most people. Together with some undervolting, your battery keeps some juice left and your phone stays under the 45 degrees.
post of the kernel: http://forum.xda-developers.com/showpost.php?p=12331961&postcount=3069
His normal stable kernel goes to 1200 mhz, which can be considered safe. and its still really fast.
So far my advice
1.2GHz laststufo's 4.8.3
Big thanks to my friend who upgraded his phone and gave me his Atrix. BIG THANKS to my wife for giving me a quad-core CPU to upgrade our desktop (after I replaced the starter and alternator of her car) and also allowing me some time off from the kids to give me some time to build this combo. Big thanks to Blades, pershoot, koush, faux123, cyanogen, the whole Atrix-dev team and the Cyanomodgen Team, and other devs whom I might have missed , to all users of Gtabs, Transformer and Atrix for testing out my work and giving back their precious input.
WARNING: ONLY FOR ELITE TEGRAS!!!
To find out if you have an elite tegra, please flash my Elite kernel on this link
http://forum.xda-developers.com/showthread.php?t=1354502
and see if you can boot your atrix and it works. If my kernel don't boot, then this combo is not for you.
Updated: 1/30/2012
1. Added some OpenGL changes in the ROM
2. Added memory tweaks in the kernel
Here is the link
http://www.tunerspotter.com/clemsyn/ClemsynCyanogenEGLCombo1.5.zip
BTW, Please
here and help me buy some diapers
---------------------------------------------
---------------------------------------------
UPDATE: 1/28/2012
Changes:
1. Played with some voltages making changes within Nvidia requirements
2. Increased overclock to 1.5 ghz (YAY!!! It's going to be pretty hot in there)
3. Increased audio bitrate for HD 1080p (since the older one had a lower bitrate)
LINK
http://www.tunerspotter.com/clemsyn/Clemsyn1.5cyanoElite.zip
BTW, I would like your opinion in HD 1080p recording. Thanks.
----------------------------------------------------------
----------------------------------------------------------
Changes:
1. ROM changes made to optimize overclock settings. This ROM will have a maximum speed of 1.4 ghz without the use of overclocking apps. If you wish to undervolt, then you can use PimpCPU, SetCPU, CPUMaster, System Tuner and etc....
2. Modifited bitrate and FPS for 1080p video recording for better result (IMHO but your input on this will be greatly appreciated)
3. The rest is regular Cyanogen gingerbread with fingerprint mods by the dev team
Your input will be appreciated
BTW, if you like my work, please click on the donations button under my signature or
and it will be appreciated. Thanks.
Here is the link
http://www.tunerspotter.com/clemsyn/ClemsynEliteCyanoCombo.zip
BTW, I would like input on HD 1080p video recording...Thanks.
Sources:
Atrix dev team github
faux kernel github
Cyanogenmod github
Now I have to try building Cyano for the Gtabs
Reserved....
Glad to see you here. I am one of the few who had boot problems with your other kernel.... but I'm still gonna try flashing this one.
I keep a backup of my current kernel on my ext-sdcard, so I'm not worried.
Do you know what what causing the issues with some phones not booting on your kernels? I can't remember what the problem was. Is it possible to fix?
Swiftks said:
Glad to see you here. I am one of the few who had boot problems with your other kernel.... but I'm still gonna try flashing this one.
I keep a backup of my current kernel on my ext-sdcard, so I'm not worried.
Do you know what what causing the issues with some phones not booting on your kernels? I can't remember what the problem was. Is it possible to fix?
Click to expand...
Click to collapse
It's the same kernel so it will not boot Didn't have time to play with the kernel because I was excited in compiling cyanogen mod in my new quad core which compiled in 23 minutes (last time I tried it on my laptop which was a core duo, it took me 7 hours).
It could be a couple of reasons.
1. GPU, AVP etc where overclocked
2. Memory timings where pretty aggresive
Exact same kernel? No changes to it? (Like patching to .53 from .48)
Notorious544d said:
Exact same kernel? No changes to it? (Like patching to .53 from .48)
Click to expand...
Click to collapse
Not yet but might soon, if time permits...building one for Gtab at the moment
clemsyn said:
Not yet but might soon, if time permits...building one for Gtab at the moment
Click to expand...
Click to collapse
Out of curiosity... do you own the Atrix now?
Notorious544d said:
Out of curiosity... do you own the Atrix now?
Click to expand...
Click to collapse
Yes (need to put more characters to post )
Any chance of getting voodoo to work on the atrix like with our transformers?
Sent from my Transformer TF101 using Tapatalk
That are some of the uv options in mv, on the faux kernel I can get the 216mhz down to 300MV so I was just wondering what I can expect from UV kernel with elite.
swyped from att gsii
Flashed this rom after using the CM9 port for a few days and missing my cam and LED flashlight. So far this is fast and no issues. I was a huge fan of the kernal and now I am a fan of the rom. Keep up the good work.
Sent from my cm_tenderloin using Tapatalk
All good here also. I am anxious to how battery life is.
OMG OMG!!!! Huge fan of your work and glad you now have Atrix
Your att kernel works for me, but cm7 however, doesn't
What exactly is a "elite tegra" :X
Battery use update:
9% drain overnight (8 hours) using a SetCPU screen off profile set to 416 max.
justflorin said:
That are some of the uv options in mv, on the faux kernel I can get the 216mhz down to 300MV so I was just wondering what I can expect from UV kernel with elite.
Click to expand...
Click to collapse
Obey the 100mv/step rule.
Feel like a NOOB
I was under the assumption that this was a combo and would work for either Cyanogen or a Gingerbread ROM but i can not get it to work with Wet Dream. However the ClemsynATT1.4elite works flawless.
rozzco said:
Battery use update:
9% drain overnight (8 hours) using a SetCPU screen off profile set to 416 max.
Click to expand...
Click to collapse
What is your wifi setting or 3g setting at? on all the time or just completely off ?? sleep policy?
mapobean said:
I was under the assumption that this was a combo and would work for either Cyanogen or a Gingerbread ROM but i can not get it to work with Wet Dream. However the ClemsynATT1.4elite works flawless.
Click to expand...
Click to collapse
This is a combo. Rom and Kernel. LOL.
New thread to house the custom kernel built with linaro's gcc 4.7.1 toolchain
This *should* work with any AOSP ics rom.
Just because this kernel is built with the linaro toolchain it does not mean the rom needs to be compiled in a certain way.
Download here: http://tinyw.in/gnOy
I'll add more details when i have some more time.
source: https://github.com/invisiblek/android_kernel_htc_qsd8k
toolchain used: http://tinyw.in/gYmj
General question on this--is this kernel intended to be used with the nightlies in your testing folder only, or are its benefits universal? I'm a little confused by this whole toolkit thing...
Sent from my ADR6300 using XDA
polarimetric said:
General question on this--is this kernel intended to be used with the nightlies in your testing folder only, or are its benefits universal? I'm a little confused by this whole toolkit thing...
Sent from my ADR6300 using XDA
Click to expand...
Click to collapse
Good question. This *should* work with any ics rom.
I tested this out last night (been running mamarley's kernel) and I ended up switching back for two reasons: first, this doesn't appear to have the 128MHz CPU speed - I'm not sure if that's intentional or not. And secondly, my phone apparently couldn't handle this kernel on 1113MHz - I got lots of FCs. And the rating on Nenamark was essentially the same as my baseline on other kernels.
Just some observations - and your mileage may vary! I really appreciate the fact that this is even being worked on, invisiblek.
EDIT: Totally meant AnTuTu, not Nenamark.
stiltzkin said:
I tested this out last night (been running mamarley's kernel) and I ended up switching back for two reasons: first, this doesn't appear to have the 128MHz CPU speed - I'm not sure if that's intentional or not. And secondly, my phone apparently couldn't handle this kernel on 1113MHz - I got lots of FCs. And the rating on Nenamark was essentially the same as my baseline on other kernels.
Just some observations - and your mileage may vary! I really appreciate the fact that this is even being worked on, invisiblek.
Click to expand...
Click to collapse
Great to hear feedback. Thats all im looking for here really.. It doesnt have 128mhz because its the same voltage as 245 hence no real benefit to having it. Plus some devices are unstable there. I never overclock but i can look at the voltages and maybe get 1113 stable
I can say it works on the new ICS TW rom, drains kinda fast although I think its rom related only.
I had only one reboot, got a freeze and then 10 seconds later a reboot. Its the only one I've had since reapplying new settings.
On freeze I was running SAv2 1113 Max/245 Min.
I have now lowered it to 998 and its running fine on that rom.
Other than that, its amazing.
Sent from my ADR6300 using Tapatalk 2
invisiblek said:
Great to hear feedback. Thats all im looking for here really.. It doesnt have 128mhz because its the same voltage as 245 hence no real benefit to having it. Plus some devices are unstable there. I never overclock but i can look at the voltages and maybe get 1113 stable
Click to expand...
Click to collapse
i take this back, 128mhz is 25mV under 245mhz here
never mind
Can you clear up the linaro tool chain for me, I'm confused as to if the ROM currently utilizes it... and if so is there a certain kernel you have to use along side it. Sorry if that's a stupid question...
Sent from my ADR6300 using XDA
Does this have fast charge?
thekendog said:
Does this have fast charge?
Click to expand...
Click to collapse
I think so, based on this commit below I'd say yes:
add smb329.c for fast charging when plugged into usb
I'm getting some pretty great battery life with this kernel and the 6/21 kang. 1 day and 9 hours after moderate use and I'm still at 30%
Sent from my ADR6300 using XDA