Database Develop

SD Card Problem

Hello everyone!
So here is my problem: my milestone don't read sd card. Week ago it was happening just occasionaly and I had to reset mobile one or few times to get it back to working but now it's useless. The problem is that other devices can normally see sd card, pc also see it normally and can write/read on it.
I've already tried everything that got on my mind but it did nothing.
Here is what I've already done:
- clean up those connecting parts on sd card with some soft material
- did the same to those parts in mobile but with an air
- flashed to 2.1 stock (I was using CyanogenMod 6 before)
- tried flashing to 2.0 but just couldn't so I abandoned this idea
- now I flashed it to got 2.2.1 but it's still the same
- formating sd card on pc
I'm just going out of my mind, don't have any idea what to do.
Hope you'll help me.
Regards,
Felven

Try formatting the card using the phone.

sileshn said:
Try formatting the card using the phone.
Click to expand...
Click to collapse
Did that, just forgot to write down. Didn't help at all. Do you think sending to repair-service will be needed?

Test with another SD card, if it works, throw that one away

I had that issue before. You can try my method - this MAY work (it worked for me).
Get a card reader and connect it to your computer.
If your computer is able to read the card - then there are still hope.
FULL FORMAT your card via your computer, I mean full format, the slow one.. not quick format.
After that, try reading it on your phone, hopefully it works.

[Q] Freaky i9000M problems - any idea why/what/who???

Hey guys, I need some advice please. Have had a number of odd happenings with my i9000 in the last 24hrs and not sure if some of them are the fault of the phone, or my fault! Apologies up front too for the long post – didn’t know how to put it all more succinctly!
First things first – it’s a Galaxy i9000M Bell vibrant. Came as Éclair 2.1, upgraded recently via Kies to Froyo 2.2, Build UGKC1. Then rooted with SuperOneClick, successfully without drama. Can get into recovery and download modes no problem via 3-button method.
Bit of background info – int SD 16GB, inserted 16GB ext SD. Before any upgrade to the phone had some issues where some photos taken with camera on the phone would show up in gallery as a corrupted/damaged icon. Pretty sure this occurred on default int SD so changed save location to ext SD but same deal now and then. Formatted ext SD – still happened from time to time. Actually replaced ext SD (exchanged at shop with brand new one), but same thing happened again. Figured I’d learn to live with it as only happened now and then.
So, phone rooted last week. Had been doing reading on ROMs/kernels before trying to flash anything. Only root-type things I’d done were to get TiB (and do full backup), Root Explorer, Terminal Emulator and Wireless Tether. Y’day I noticed after taking a few pics that one of the ‘corrupt’ icons that had previously been in place of an older photo, was now in the spot of one of the pics I had just taken (and strangely, the older, apparently corrupted photo was now fine).
I tried to delete a few of the photos but the phone just got stuck trying to delete. Had to force close it with task manager. Same deal if I tried 1 or many photos. Did this a number of times but no joy. Eventually just took ext SD out, put it into PC and deleted them that way, then put back into phone. Now it took AGES to complete the media scan on ext SD – like 5-10 mins! This happened a couple of times if I tried to do anything with the SD eg. save a file to it. So reformatted the SD card (on PC) but same prob when put back in phone.
Figured it might finally be time to try a new kernel in hope it may fix this bug. Had speedmod all ready to go (but hadn't been brave enough yet to try my first flash) so flashed K13E-500Hz via Odin. It worked fine, but “media scanning” problem was still there. Figured I might as well go the whole hog so factory reset the phone via recovery 3e. Did this ok, and “media scanning” was no longer a prob when I put the ext SD card in, just took a couple of seconds – hooray!
Restored apps + system using TiB which also appeared at first to work fine. Put a few pics and ringtones on the ext SD and all seemed fine. Then some app icons disappeared from the Applications pages. They appeared ‘crossed out’ in TiB and when I went to restore them again the phone spazzed out saying (sorry can’t recall exact wording) there was not enough memory and to delete some things to try to fix this. A red SD-like icon appeared in the top bar. I tried rebooting the phone via recovery 3e and it went into a cycle of vibrating, flashing up the turn-on screen/display then shutting off, but vibrating occasionally and lighting the soft touch keys but nothing else. This did this for about 5 mins and in order to try to save battery/stop the whole process I ended up factory resetting yet again via recovery.
Today it works 'ok'. Have not braved putting an ext SD in yet! Got Tib off the market but have also not dared to try to restore any thing yet. Oddly, in TiB it shows “System ROM” as almost fully taken up ie. Full green bar (289MB, only 6.06MB free) – this can’t be right can it?
Internal, DB data and SD card all show as ~99% free.
Deleted Dalvik cache in case that was the RAM problem but it didn’t do anything much (freed up about 6MB only).
So, my questions!
1. is this all because of the ‘corrupt/damaged’ issues before I’d done anything to my phone?
1b) How do I find out what RAM is available and what is using it all up? RAM manager is showing 197MB/339MB used but is this what the 'memory' problem would be? Clearing memory doesn't seem to do anything.
2. I never installed any kind of lagfix (knowingly anyway) – could this be a reason - have seen lots of threads/posts about disabling lagfix before flashing roms or kernels
3. I thought factory reset would wipe everything – but it obviously kept the int SD info ok (I’d copied Tib backup to ext SD and also to dropbox just in case) –should I maybe reformat the int SD and factory reset again?
4. If the issue is the phone itself (with prior corrupt file problem) – would it be worth flashing back to stock kernel and unrooting phone to try to bring back and get fixed/replaced under warranty?
Thanks in advance for any help anyone can offer!!!!!!

Read your hole post its really long. Can't answer to all questions. But did you try to put your phone as massage storage to your pc and mark everything thats on int sd and just erease it. When turn your phone off, put it in download mode and flash a stock rom (with 3 files) from samfirmware.com with repartition enabled? Maybe that works. Good luck! Before i forgot ext 4 is the better filesystem. Rfs getting laggy after a while cause its not the correct filesystem for sgs. Thats why ext4 is the main format on sgs2.
Sent from my GT-I9000 using XDA App

hey thanks for the reply.
i know it was a super-long post, apologies again.
didn't try deleting the ext SD whilst connected via usb. got fed up with the phone not being able to delete & freezing when i tried that way so just took SD out and deleted them with card plugged directly into laptop.
as it happens, since 2nd factory reset, i've been cautious about what i do. no ext SD yet (though might try that tomorrow). didn't do full restore of missing apps and system files as i did the first time. so far have only restored about 6apps via TiB and wifi locations. Phone working ok...for now.
next steps:
1. try taking loads of photos to see if 'corrupt'-style icons occur again with int SD only;
2. maybe try an ext SD again after reformatting it and see how the media scanning goes and how it goes having music/vid/pic files on it etc;
3. gonna look more into the speedmod kernel ie. the tweaks which i think i need to access via recovery mode.
not quite ready to try and flash a custom rom with that little scare!
...but would like to try a custom rom at some point when i feel more educated about all this

Just look at the search function on xda or google. There enough guides about flashing. Know how you feel. The first time i flashing it was very scary for me. Got a heartbeat like a technosong. If you want i can write you a guide for every step. Trust me it is easier as it sounds. Just pm me and i will help you out.
Sent from my GT-I9000 using XDA App

[Q] Blank SD card or has Unsupported File System Error

The AMOLED screen on my Nexus One broke, so, I sent it for repair to a dealer cause there is no official HTC support for Nexus One in India. Before I sent the phone I took a backup of my SD card and also removed it from the phone.
After I got the phone back with the new screen installed, I put in my SD card and it says Blank SD card or unsupported file system. So, I tried different SD card and the same thing popped up with every card I put in. It would ask me to format the card and even if I formatted, it would not mount the SD card. The SD cards work in all other phones and SD card readers.
So, I sent the phone back to the repair guy and he said that its most probably a software bug because if it was a hardware bug then the error message would not pop up at all. He said that it would be best to reflash the ROM but then he tried and the ROM could not be reflashed.
Now the Phone is with me and everything works except for the SD card. Plugging the phone in the computer also doesn't help as the card is not being mounted by the phone at all.
The phone I am using is a Nexus One with stock ROM Android 2.3.4 (never rooted or hacked).
Please help me find a solution to this. I'm even ready to install a custom ROM but can't do so without an SD card.
Please help!!!

Ok well android can't find the SD card but lets see if your bootloader can if not then send it in for repairs again because it's not software. Check my sig there is a link that says passimg try those instructions and tell me what you get.

Hey,
Thank you for the response but most of the instructions require the SD Card. However, in my case as you know the SD Card itself is not functioning. So even if I download the Passimg file, I can't place it on the SD card.
Is there a way to use ADB to wipe the phone completely and then reinstall the original factory stock ROMS?
I did go back to the vendor and asked him to repair the device but after a heated argument he just said that the device's SD card is working but it is not recognizing the cards in it which he said is because of a software bug and for that you need to re-flash the device completely but he didn't have the means to do it, so now I'm left with an unusable phone.
So, in shot can I do the whole reflash thing without the SD card working?
Thank you for responding, you're the only one so far whose come to the rescue. Waiting to hear from you.
Thanks

Hey,
So I just understood the full extent of your recommendation. You wanted me to check if the bootloader detects the Passimg file or not given that booting into Android is not doing that.
As per the instructions on the passimg page I need to download the FRG83 ROM and apply the update. But I'm just wondering if I do this and if the bootloader actually detects the update on the SD card, won't I also need to downgrade the HBOOT version or is it jut safe to apply the downgraded FRG83 over the GRJ22 build that I currently have on the phone?
The details of my phone are as follows:
Nexusone pvt Ship S-ON
HBOOT-0.35.0017
MICROP-0b15
TOUCH PANEL-SYNT0103
RADIO-5.08.00.04
Oct 12 2010, 14:33:16
Please guide as per your convenience,
Thank you.

I'm not 100% sure but I'd assume that if you do as what you're planning to do.. the HBOOT should also be flashed automatically with the rom. double check incase!

Hi Again,
So, I took the risk and downloaded the FRG83 ROm loaded it into my SD card using a different phone and then put that card into the SD card slot of the Nexus One.
I went into the boot loaded and it automatically detected the PASSIMG.zip file and asked me whether I want to install the Update - I chose YES.
The update installed successfully and I booted into Android. After finishing the Wizard, I checked the Android Version and it says FRG83 but when I look at the notification bar it still shows me the same error "Blank SD card or has Unsupported File System".
So, we can conclude that the SD card and the SD slot work fine.. Any thoughts on what could be done next?

Well that's weird ok well lets see what the computer says. Put the card back in that other phone and connect it to the computer then on the computer go to computer then right click the card (probably E: maybe F: ) then go to properties and check file system make sure it's FAT32.

Not sure if it's wort posting on this thread still, but lots of people come searching for a solution to this problem so I figured I'd post at least another thing to try.
I've had this happen several time on various Android phones. I've been able to bring the card back every time. I throw the card into my micro usb reader, pop it in my computer, and run disk utility (I don't know what equivalent would be for Windows). You should see your SD card come up and see your main data partition there below it. Click on the partition and click repair in the bottom right.
It will run through some stuff and you'll be able to see if it's found anything in need of repair and if it repaired it.
The few times this has happened to me Disk Utility said it was an empty block at beginning of some data or something...
YMMV

Not sure if it's worth posting on this thread still, but lots of people come searching for a solution to this problem so I figured I'd post at least another thing to try.
I've had this happen several time on various Android phones. I've been able to bring the card back every time. I throw the card into my micro usb reader, pop it in my computer, and run disk utility (I don't know what equivalent would be for Windows). You should see your SD card come up and see your main data partition there below it. Click on the partition and click repair in the bottom right.
It will run through some stuff and you'll be able to see if it's found anything in need of repair and if it repaired it.
The few times this has happened to me Disk Utility said it was an empty block at beginning of some data or something...
YMMV

When I had this exact problem, I had to replace the SIM/Micro SD flex board to fix it. They were $15 shipped on eBay at the time.

not accepting SD card/install on emmc

Have had NC rooted w CM7 since April w no problems.
As of month ago, SD card has not stayed in. Seems spring that locks card in is junk. Tried other cards and same thing so has to be hardware.
Because of this, can't download any files, update CM7, CWM, etc. Total bummer.
Can I flash CWM and CM7 directly to emmc or is that impossible w/o SD card?
Have searched multiple forums for resolutions to this issue but no one else seems to have this problem.
Would hate to lose this functionality and have a crippled NC.
Thanks in advance

I never done that but according to my read, you have 2 options
1. Flash CwMR (aka ROM Manager) into eMMC and using it.
2. If you can get ADB working, you can push stuff over.

I had exactly that problem and it happened right in the middle of an update and would not reboot at all. Here is what I did:
Fished out my original, bootable SD card with Nightly 86 and the apps pack, put it in the slot and held it all the way in. Booted up and reinstalled CM7 to the eMMC. (I did not wipe anything but Davlik so I still had all my apps and settings. Then, rebooted into CM7 while holding my regular SD card in place, opened ROM Manager and reinstalled Nightly 201. (I had to hold the SD card in throughout this process to complete which was very strenuous.) Now I am back to where I was, except the SD card slot is basically useless. I called in under warranty and a new Nook is on the way. When I get it I will go through this tiresome process one more time to revert the current Nook to stock before i return it.
If you were only running CM7 off the SD card and still have a functioning stock Nook, forget everything i just said and call them up to request a replacement under warranty. If your warranty is over, you are either stuck with stock or you will have to root the way I just mentioned above.

[Solved][Q] Error mounting /sdcard/.android_secure!----Clockworkmod Recovery

Hey guys, I'm having a bit of a problem with CWMR.
I was on Asylum ICS 14 when I bought a new Transcend 32gb class 4 microsd card.
It worked fine for half a day and when I tried using MX video player later that night, the phone had stopped reading the microsd card.No amount of re-inserting the card would help.The card didn't work with my laptop (running Windows 7) and PC (running Linux) either.So I tried wiping data via CWMR but it shows the error--
Wiping data
Wiping cache
Error mounting /sdcard/.android_secure!
Skipping format
Format complete
I checked and the data gets wiped i.e. all the use apps and settings are cleared.
But the error repeats no matter how many times I've tried to wipe.
I tried flashing a stock GB firmware(KL3 to be exact)and I still get the same error.There is no real problem with the wipe,it works just fine.
Thanks guys

And yes, I've changed the microsd card-it's now a Strontium 32 gb class 10 card.
Not my fault really, my dad just went out and bought the Transcend one
Hmm...sorry about that...I didn't think me rating on my own thread would count !

This is common on pretty much every device out there, it's nothing to worry about.

mbh87 said:
This is common on pretty much every device out there, it's nothing to worry about.
Click to expand...
Click to collapse
Really? No disrespect, but there would be at least one thread about it if it was a common problem ?
Anyways, thanks !

warfareonly said:
Really? No disrespect, but there would be at least one thread about it if it was a common problem ?
Anyways, thanks !
Click to expand...
Click to collapse
It might be a problem with an update, because I'm suddenly having the same error. I'm about to backup my recovery.tar and try to install an older version. Xperia Play 4g with stock 2.3.3, rooted. I've made backups before, and can't find any info as to what a solution is.
The .android_secure folder is a super hidden folder that contains all data from when you move an app to your sd card.
What might be your problem is that you have two of them. One in internal storage and one on an external sd card. Try taking the external one out and backing your phone up to the internal one.

warfareonly said:
And yes, I've changed the microsd card-it's now a Strontium 32 gb class 10 card.
Not my fault really, my dad just went out and bought the Transcend one
Hmm...sorry about that...I didn't think me rating on my own thread would count !
Click to expand...
Click to collapse
It happened to me also, try this take out your microsd, do factory reset (only on save kernels), format your microsd
Insert it, boot up your phone.
If I'm not wrong, there was a faulty cwmr , which cause this.
Update your kernel

Maybe your card is faulty.
I recently bought sandisk 32 gb card and put up in my galaxy note. It kept saying no card inserted. Same error on windows 7. And after that i come to know that its a factory fault. Got it replaced from the service center.
Sent from my GT-N7000 using xda app-developers app

Fixed.
Flashed abyss kernel 4.2 and did a fullwipe.
Then went back to ParanoidAndroid.
Dunno what caused it, but I no longer care as its fixed

Sorry wrong thread.

Any fix? I need that android secure folder