Related
Alright, I'm pretty uniformed when it comes to these things, but as it stands I need some help. I have a Bell Galaxy S (GT-I9000M) that I unlocked to use on Telus and then rooted a month later in an attempt to trouble shoot a reception issue (don't ask). Trouble shooting failed and now I'm trying to get the circumvent the warranty issues by trying to re-flash back to the stock bell ROM, which is from what I can tell the I9000UGJH2. I downloaded it from (samfirmware). I'm trying to use Odin and am having some troubles. When I extract the file there is only a single .tar file inside (I9000UGJH2-PDA-Kernel-Bootloader-CL490514-Low). As such I am unclear as to what to enter for the PDA/PHONE/CSC fields. I assume this file is the PDA, and inside is the modem file if I look. Do I need to extract this to use in the modem field? I'm so confused.
Also, a couple of things. Ive had 'success' flashing using just the the one file in the PDA field, as well as that plus the modem file found inside extracted and selected in the MODEM field. HOWEVER, in both attempts though it seem to boot into the OS fine, neither recognize my SIM card. Clearly this is some sort of failure. Any suggestions?
Oh, and yes, I can get into download mode. That's the only reason I'm fiddling.
since the phone boots into the OS
and you have the 3 buttons working
you can try flashing it back to stock (JH2) using KIES
and see if you can get it to recognize your Telus SIM card with that.
before you go ahead, do you have friends or family with Fido or Rogers SIM you can try?
just to make sure it's not a Telus SIM card problem
I'm pretty sure I did flash it to the stock JH2. When I plug into kies and search for firmware updates it says there are none. Am I doing something wrong?
maybe if I flash the update prior to JH2? Then it will see it need an update and go to town?
on the registry just change all the JH2 references to JG9
then it will offer you JH2 for "upgrade"
or you can use this
http://forum.xda-developers.com/showthread.php?t=799810&highlight=i9000m
done and done. used the regedit. prompted to update. did so. loads the galaxy s screen, then goes to black. i kind of want to kill myself ;(
try booting into recovery mode and wipe data + wipe cache
see if it can boot after that
Sent from my GT-I9000M using XDA App
Hi all, well, here is my problem.
I have my stock rom 2.1 eclair from Personal, Argentina, and i flash the phone to put the 2.1 ARO (Unbranded). After the flash, the phone works great for a while, then i lost connection, and i coulnt connect to my network anymore. I couldnt performs calls, sms, or whatever related with communication. I only have wifi.
If i access to Mobile Networks -> Net Operators, the phone keeps searching and never retrieve the list of network operators. My apn list is empty, and i couldnt add new ones, mannually or by APN Restore & Backup software. The network mode is not selected, but if i choose one mode, it doesnt selected it.
I Flashed the phone with Odin, with and without repartition, but it still having errors.
Any one can help me?
Factory reset first .
jje
i've performed a factory reste, but nothing happends...
try to deactivate the mobile data and restarting the phone this worked once for me, if that doesnt work i would suggest trying another rom this also worked once for me. And if all else fails then your gonna have to send it back for repair, i had to do that last time this happened. I put on the 2.2 update from my carrier and told them that the phone messed up after updating.
The endless searching for a carrier is normal, but you should be able to enter apns manually. Search for the code to check IMEI and confirm you have one listed.
If you have a backup of your efs file, you can restore that and see if it solves the problem, or load an Argentinian csc file (they may have one in the ROM Kitchen that you can cook as an update.zip) .
Sent from my GT-I9000 using XDA Premium App
I got a GNOTE from negri on 11/9. It seems it was s polish version. It has been working wonderfully on ATT (after adding in APN manually for 3g/H+ -- voice worked out of box).
I rebooted Today (11/13) and now it has the crossed out circle instead of bars and says "Insert sim" when I start to do cellular related activities.
I have Seated and reseated; nothing. pulled the sim and put back in my SGT (phone enabled) and it works. Put back in GNOTE, still no sim detected! Stuffed SIM in my N1; it works.
Any suggestions?
I had a similar SIM card issue when I tried to activate the 1700MHz band in Service mode (for fun). Wipes and stuff didn't solve anything. The way to revert it for me was flashing a full stock Samsung firmware in Odin.
Can you provide more details on how you did this?
Where does one get a full stock sammy note firmware?
Are there some good instructions on this?
I have flashed my SGT via odin several times. Same odin? Same process?
In the development section you will find some versions.
The key for me was flashing a new Modem (Radio/base band) image via Odin I think. I changed Kernels and ROM's but only flashing a ROM including the Modem got rid of my SIM issue. Not sure because in the end I flashed a full N7000OXAKJ1 firmware in Odin from here:
http://forum.xda-developers.com/showthread.php?t=1310513
It did the trick, though the tread is dead. I think any ROM including Modem might help, I currently running the 2.3.6 N7000ZSKK1 firmware and it is great, also included a Modem.
http://forum.xda-developers.com/showthread.php?t=1342797
fwelland said:
I got a GNOTE from negri on 11/9. It seems it was s polish version. It has been working wonderfully on ATT (after adding in APN manually for 3g/H+ -- voice worked out of box).
I rebooted Today (11/13) and now it has the crossed out circle instead of bars and says "Insert sim" when I start to do cellular related activities.
I have Seated and reseated; nothing. pulled the sim and put back in my SGT (phone enabled) and it works. Put back in GNOTE, still no sim detected! Stuffed SIM in my N1; it works.
Any suggestions?
Click to expand...
Click to collapse
when this happened to me, also due to turning on 1700, I was able to reset my phone by doing a factory reset. Unless your modem.bin is corrupted, you should not have flash a new rom.
- frank.
ugh....
you mean factory reset via Settings->Privacy->Factory Reset?
Tried that... No affect. Is there another way to do this?
Was hoping to fix w/o the flash. NOTE: I did go into that service menu with the 3G Freq are listed. I was curious when I saw the post. But I never changed anything. Just saw the screen and thought "neato". I wonder if there is another service screen that has an option for 'unfuck'???
Still searching for answers, before trying the ROM route...
fwelland said:
ugh....
you mean factory reset via Settings->Privacy->Factory Reset?
Tried that... No affect. Is there another way to do this?
Was hoping to fix w/o the flash. NOTE: I did go into that service menu with the 3G Freq are listed. I was curious when I saw the post. But I never changed anything. Just saw the screen and thought "neato". I wonder if there is another service screen that has an option for 'unfuck'???
Still searching for answers, before trying the ROM route...
Click to expand...
Click to collapse
Here is Chodthewacko posted about it:
http://forum.xda-developers.com/showthread.php?t=1335920
Factory reset and toggle band settings seems to have worked for him. I got frustrated and Odin flashed everything, that worked for me.
whoa....
when I try that procedure (* # * # 1 9 7 3 2 8 6 4 0 # * # * ) I get a pretty empty screen...can't do much of anything...just some useless buttons on the bottom of screen when I select the menu button...
I think I recall seeing another number for doing a similar thing...
fwelland said:
I got a GNOTE from negri on 11/9. It seems it was s polish version. It has been working wonderfully on ATT (after adding in APN manually for 3g/H+ -- voice worked out of box).
I rebooted Today (11/13) and now it has the crossed out circle instead of bars and says "Insert sim" when I start to do cellular related activities.
I have Seated and reseated; nothing. pulled the sim and put back in my SGT (phone enabled) and it works. Put back in GNOTE, still no sim detected! Stuffed SIM in my N1; it works.
Any suggestions?
Click to expand...
Click to collapse
OMG I have the EXACT same issue as you, and I got mine from NEGRI also! It was working perfectly until last night --- all of a sudden I got that circle and I've been trying to fix it since then! Please keep me posted if you find a solution, I was going to try and contact Negri tomorrow for an RMA.
still nothing.
I did a root. No changes...
I did a rom flash of kk1 ... no changes....
I was trying to reflash the modem with KJ6 modem....but have a signature failed problem...
now what???
I solved my issue by a combo of those steps.
I did full flash in Odin of jk1. When I rebooted that didn't solve things so I wanted to flash the other recommendation, kk the Chinese rom.
Upon entering recovery I noticed I lost 2e and was on 3e. So I had to download chainfire's rooted jk1 kernel and do that zerg rush to get root. It was while I was doing that that suddenly my similar got recognized. By the time it finished installing the rooter kernel I had full reception again. I flashed kk just for good measure and its been smooth since. Hope it works for you too and I'd love to know what the heck broke it in the first place??
Sent from my GT-N7000 using XDA App
hi fwelland, it's hk1981...so you tried the rom flash and it didn't work?
Hi hk1981,
No the KK1 rom flashed fine. By all accounts it works well, except that pesky phone part. This KK1 rom is really 'clean' and very little bloat-ware and it installs a vanilla boot animation (not a carrier one). All that is nice, but didn't help my problem
I did notice a peculiar thing: while in recovery (android recovery, not cwm) I get some warning about "CSC something or other, fixing".
I have a short list of things to try before I have exhausted my DIY options -- the post just above looks promising.
I think the answer is out there. We just need to keep looking and keep attention on this thread and others like it. This place and others like it are a huge help and I'd like to solve it and then give back a good set of instructions.
FWIW: I wonder if there was some voodoo in the polish rom that caused some issues in the modem when a different than expected sim was installed? Or if one of those funky polish apps that updated it self before I could turn off auto-updates has something to do with it (doubt this -- I don't think apps can do stuff unless rooted...)...
Still searching....I got this other pesky problem to deal with now: w-o-r-k
fwelland said:
Hi hk1981,
No the KK1 rom flashed fine. By all accounts it works well, except that pesky phone part. This KK1 rom is really 'clean' and very little bloat-ware and it installs a vanilla boot animation (not a carrier one). All that is nice, but didn't help my problem
I did notice a peculiar thing: while in recovery (android recovery, not cwm) I get some warning about "CSC something or other, fixing".
I have a short list of things to try before I have exhausted my DIY options -- the post just above looks promising.
I think the answer is out there. We just need to keep looking and keep attention on this thread and others like it. This place and others like it are a huge help and I'd like to solve it and then give back a good set of instructions.
FWIW: I wonder if there was some voodoo in the polish rom that caused some issues in the modem when a different than expected sim was installed? Or if one of those funky polish apps that updated it self before I could turn off auto-updates has something to do with it (doubt this -- I don't think apps can do stuff unless rooted...)...
Still searching....I got this other pesky problem to deal with now: w-o-r-k
Click to expand...
Click to collapse
I had that problem too, it doesn't detect that CSC and then goes ahead and applies something. Check to see if you are in 3e recovery, I think you are after having flashed vanilla JK1.
Re-flash Chainfire's rooted kernal for your appropriate version and then go back into recovery and it should be 3e and you can flash thru CWM then.
Also note; each time I flashed, I also wiped data/cache/davlik just to be sure.
yes it does say:
Code:
Android system recover (3e).
So I will need to try the methods you (crippenx) suggested.
FWIW, the CSC message that I get when I first enter recovery is:
Code:
# MANUAL MODE #
--Updating application...
Successfully update application.
--Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'TGY'
Sucessfully applied multi-CSC.
I have no idea what this means. It does it every time I enter recovery.
FWIW, I never flashed this gnote with ODIN (I have used ODIN on my SGT several times). I got to KK1 by first rooting via http://forum.xda-developers.com/showthread.php?t=1329360 (using 'forget the above steps') and then using the CWM 'kk1-wipe.zip' from here http://forum.xda-developers.com/showthread.php?t=1342797 -- I didn't use ODIN to get to kk1.
I see on the Root/Unroot thread, there is a KK1 kernel option for 'simple'. I think I will try that with rooted already script.
But I am open to any/all suggestions...
Code:
Baseband
N7000XXKJ6
Kernel
2.6.35.7-N7000ZSKK1-CL706440
[email protected] #2
Build Number
GINGERBREAD.ZSKK1
fwelland said:
whoa....
when I try that procedure (* # * # 1 9 7 3 2 8 6 4 0 # * # * ) I get a pretty empty screen...can't do much of anything...just some useless buttons on the bottom of screen when I select the menu button...
I think I recall seeing another number for doing a similar thing...
Click to expand...
Click to collapse
My rough guess is that the phone has a list of 'valid service menu options', and it cross references it with what is on the SIM card.
Once the phone decides it's not going to read your sim card, the service menu is blank. This is a real headache.
That's why once I set the 1700+2100 combo, and my phone boycotted my sim, I wasn't able to set it back.
That's really dumb, imho, to have a one way toggle like that. I'm fine for settings to enable/disable other settings, but for a setting to disable itself? ugh.
I would really like to know what's going on. I was planning on switching to AT&T before my next trip (which is soon) but I can't risk my phone glitching out like that during the trip.
Actually, the ROM is on my SD card so I guess it wouldn't be THAT horrible, but it's certainly not something I want to do. Perhaps we just need a way to flash back the modem.bin, assuming it's corrupted.
- Frank
Sorry typo on my part. You are in 3e recovery because of that base flash, now you need 2e recovery which you can get via chainfire's rooted kernel. His installation procedure runs a batch file that uses that zerg rush exploit which I gather is partially from gingerbreak. It was during this procedure that my baseband suddenly came back, my sim card finally detected.
Once that was done, I entered 2e cwm with volume up,power,middle button and did erase of data,cache,davlik and then flashed kk rom via zip file.
Sent from my GT-N7000 using XDA App
fwelland said:
yes it does say:
Code:
Android system recover (3e).
So I will need to try the methods you (crippenx) suggested.
FWIW, the CSC message that I get when I first enter recovery is:
Code:
# MANUAL MODE #
--Updating application...
Successfully update application.
--Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'TGY'
Sucessfully applied multi-CSC.
I have no idea what this means. It does it every time I enter recovery.
FWIW, I never flashed this gnote with ODIN (I have used ODIN on my SGT several times). I got to KK1 by first rooting via http://forum.xda-developers.com/showthread.php?t=1329360 (using 'forget the above steps') and then using the CWM 'kk1-wipe.zip' from here http://forum.xda-developers.com/showthread.php?t=1342797 -- I didn't use ODIN to get to kk1.
I see on the Root/Unroot thread, there is a KK1 kernel option for 'simple'. I think I will try that with rooted already script.
But I am open to any/all suggestions...
Code:
Baseband
N7000XXKJ6
Kernel
2.6.35.7-N7000ZSKK1-CL706440
[email protected] #2
Build Number
GINGERBREAD.ZSKK1
Click to expand...
Click to collapse
For me flashing all partitions via Odin worked (no pit file or repartition). Tried all sort of stuff from recovery first with no result.
I don't know what partition flash from Odin did the trick, but you could try Odin flashing a Modem separately and check if that works. If not try the rest?
Finally got back to this.
After much fusing I finally got KK1 and cwm working. It was odd, I had to re-run the whole root process again.
At that point I could apply the KJ6 modem w/o any problems (via cwm)
no dice!
Still dead!
Not sure where to go next???
Can some one provide a few details about flashing a modem,rom and/or kernel via ODIN? Perhaps that method will work....
fwelland said:
Finally got back to this.
After much fusing I finally got KK1 and cwm working. It was odd, I had to re-run the whole root process again.
At that point I could apply the KJ6 modem w/o any problems (via cwm)
no dice!
Still dead!
Not sure where to go next???
Can some one provide a few details about flashing a modem,rom and/or kernel via ODIN? Perhaps that method will work....
Click to expand...
Click to collapse
Oh when you flashed jk1 I assumed you did it the old way via Odin and the multiple files. That's how I did it and you're right, that may be what fixed it as when I used to brick my sgs and sgs2, it was always a full Odin flash of stock that brought it back from the dead
To flash in Odin put your phone in download mode. Fire up Odin. In csc point to csc file. In phone section point to modem and for PDA you point to the code file. Don't put anything for pit or bootloader and unchecked the repartition toggle.
Connect your phone and wait for Odin to detect it and show yellow in the status window. Press start and you're good to go. Hope this does it!
Sent from my GT-N7000 using XDA App
So, I recently installed CM9 and on top of that SlimBean 2.6. Both worked otherwise perfectly, but I couldn't get my 3g connetion to work on either one, unless I turned "National Roaming" on. I checked the Acces Point Name settings, and they seem to be fine. I can't find my service provider on the Network operators list though. I read that a new modem migth do the trick, but I have no idea if that will help or which modem to choose.
I had a similar problem after going to CM9. I even had my APN (access point names) settings disappear randomly also.
Solution for me was to turn 'airplane mode' on....wait 30 seconds then turn off.
Strange as it sounds but it actually worked for me. But in the end, (after 1 day) I changed to samsungized 12.1 JB rom because I found that I had to use that airplane mode on/off alot and was too much of a pain.
Hope this helps.
If not, I'd revert back to a stock rom then upgrade to a stable JB rom
Tried just that, but no luck so far. Any other suggestions?
Taatero said:
Tried just that, but no luck so far. Any other suggestions?
Click to expand...
Click to collapse
Id recommend trying a good stable stock rom with a 512_pit repartition via Odin, just to see it it improves the modem or not.
The rom im going to suggest has a replacement Modem file within.
Might sort the problem.
Ive used this stock rom to fix my many problems ive had after custom roms.( Mainly format errors i had )
Its from 'HotFile' site and took me around 20 mins to download it.
But it might be worth the wait in your case.
Rom File:
http://hotfile.com/dl/140301534/be8872c/I9000XXJVU_I9000OXAJVU_OXA.rar.html
Here Is the Pit File and Odin version I used. ( 3rd box down the page )
http://forum.xda-developers.com/showthread.php?t=1102881
And heres the Root file. Get " CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS " :
http://forum.xda-developers.com/showpost.php?p=15188469
s1_odin_20100512.pit Goes in PIT ( repartition checked )
CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 Goes in PDA
GT-I9000-CSC-MULTI-OXAJVU.tar.md5 Goes in CSC
MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 Goes in phone
Sorry if im telling you what you already know with how to use Odin, just making sure.
After rom install pop this root on with Odin via download mode.
CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS goes in PDA
I reckon its worth a shot.
Must make sure the 3 wipes are done before the rom install. I learned this the hard way and messed my
phone up for a while.
Problem solved! I did some googling around, and found a solution. Apparently my carrier, Saunalahti, is known for having problems with 3g on custom roms. I found out that a nexus s modem by the name of i9020AUCKF1 might work. And sure enough, it did the trick! No more roaming! Anyway, thanks for taking the time to help me!
Hi fellow XDA members,
I own a Galaxy Note 5 (SM-N920I) which was bought in Singapore under operator Starhub (STH). I happen to use this phone in India and I later realized the phone supports VoLTE but the firmware didn't so I stuck with using the Jio4GVoice app for a long time now and I'm done with it due to lot of bugs and call drops.
I looked online for solutions and found many that involved root or custom recovery to flash the so-called VoLTE fix. I have read articles that said the Indian firmware supports VoLTE so I So, I tried the following:
Download the Indian firmware and flashed via odin. But it fails with error specified file not found. Did a research and i unchecked the Re-partition and again tried and it fails at flashing system . So I re-flashed the STH firmware to get the phone boot up. I learnt that CSC is responsible for getting the region specific network to work.
Extract CSC from Indian firmware and simply flash it on odin. But, as articles say that I'll have 4 files for each boxes to place in odin I only had one tar (<firmware_HOME_tar.md5). Then I read, extracting the modem.bin file and ziping that to a tar file and flash it via odin will help. I tried that but no luck (should I factory reset it?).
Both the firmwares have a single file and articles say that there will be CSC_<firmware>.tar and CSC_HOME_<firmware>.tar.
I don't know where I'm getting wrong. Is this even possible or i'm simply wasting my time? I use samsung pay and S health extensively so I don't wanna trip knox.
Update:
I read that cache.img is CSC from here. So extracted the cache from Indian firmware and flashed that to my phone that has STH firmware. I used the Phone info app and found baseband has been changed and available CSC shows INS but active CSC is STH. Now I guess i just need to activate that CSC. I tried the steps mentioned here but it doesn't work.
https://imgur.com/9Fiy4W4
https://imgur.com/vVe6LDQ
ksbalajee said:
Hi fellow XDA members,
I own a Galaxy Note 5 (SM-N920I) which was bought in Singapore under operator Starhub (STH). I happen to use this phone in India and I later realized the phone supports VoLTE but the firmware didn't so I stuck with using the Jio4GVoice app for a long time now and I'm done with it due to lot of bugs and call drops.
I looked online for solutions and found many that involved root or custom recovery to flash the so-called VoLTE fix. I have read articles that said the Indian firmware supports VoLTE so I So, I tried the following:
Download the Indian firmware and flashed via odin. But it fails with error specified file not found. Did a research and i unchecked the Re-partition and again tried and it fails at flashing system . So I re-flashed the STH firmware to get the phone boot up. I learnt that CSC is responsible for getting the region specific network to work.
Extract CSC from Indian firmware and simply flash it on odin. But, as articles say that I'll have 4 files for each boxes to place in odin I only had one tar (<firmware_HOME_tar.md5). Then I read, extracting the modem.bin file and ziping that to a tar file and flash it via odin will help. I tried that but no luck (should I factory reset it?).
Both the firmwares have a single file and articles say that there will be CSC_<firmware>.tar and CSC_HOME_<firmware>.tar.
I don't know where I'm getting wrong. Is this even possible or i'm simply wasting my time? I use samsung pay and S health extensively so I don't wanna trip knox.
Update:
I read that cache.img is CSC from here. So extracted the cache from Indian firmware and flashed that to my phone that has STH firmware. I used the Phone info app and found baseband has been changed and available CSC shows INS but active CSC is STH. Now I guess i just need to activate that CSC. I tried the steps mentioned here but it doesn't work.
https://imgur.com/9Fiy4W4
https://imgur.com/vVe6LDQ
Click to expand...
Click to collapse
here is another method you can try. but this only works if your phone supports it.
For firmware that uses a multi-csc code, you need to select a sales code before attempting to connect to a cellular network. This is especially true for 3G and 4G connections.
There are two ways to select a sales code:
1. Enter *#06# in the phone dialer to obtain the IMEI number for the device. You can then enter *#272*Device IMEI# to select a sales code. If your Samsung device does not return a menu, the product code is not a multi-csc code.
OR
2. Install an CSC changer app, such as the "Phone INFO" app. CSC changer apps do require root access, and they do not work on all phones and all versions of Android.
Hit thanks if it helps !
P.S. IT ONLY WORKS ON STOCK ROM ...! so you need to be on Stock Rom.
dark_phoenix said:
here is another method you can try. but this only works if your phone supports it.
For firmware that uses a multi-csc code, you need to select a sales code before attempting to connect to a cellular network. This is especially true for 3G and 4G connections.
There are two ways to select a sales code:
1. Enter *#06# in the phone dialer to obtain the IMEI number for the device. You can then enter *#272*Device IMEI# to select a sales code. If your Samsung device does not return a menu, the product code is not a multi-csc code.
OR
2. Install an CSC changer app, such as the "Phone INFO" app. CSC changer apps do require root access, and they do not work on all phones and all versions of Android.
Hit thanks if it helps !
P.S. IT ONLY WORKS ON STOCK ROM ...! so you need to be on Stock Rom.
Click to expand...
Click to collapse
Thanks for your help. I tried solution 1 and it Worked
However, before trying out your solution, my device was in this state:
1. Flashed Singapore ROM
2. Extracted every file from Indian rom and repacked the tar except the system.img (as this was failing to flash in odin)
3. After booting I got a notification from SupportAgent telling me that unauthorized changes have been made, tap here to reboot to undo those changes
4. I then read your solution and updated the CSC to INS from STH. And device got factory reset and for the first time I saw VoLTE logo on my phone :victory:
5. I finished the setup and still getting the same error in notification from SupportAgent. So I tapped on it, and device rebooted to a new blue screen with sim card logo on it and then boot up to system.
6. Now, in the quick settings, VoLTE toggle is gone and I got WiFi Calling toggle instead. However I still have the VoLTE icon on the status bar.
7. So later that day, I redo all the steps.
- Flashed Singapore firmware (This time, the CSC Country was Singapore and the active CSC was XTH instead of STH. There was VoLTE toggle)
- Flashed Cache from Indian Firmware (CSC Country changed to India the active CSC was INS automatically. Now got WiFi Calling toggle)
8. I noticed other changes in the software:
- The gallery App doesn't show Grid view so I'm stuck with List view
- The Samsung Pay says, its not supported for this device
What do you think about this?
ksbalajee said:
Thanks for your help. I tried solution 1 and it Worked
However, before trying out your solution, my device was in this state:
1. Flashed Singapore ROM
2. Extracted every file from Indian rom and repacked the tar except the system.img (as this was failing to flash in odin)
3. After booting I got a notification from SupportAgent telling me that unauthorized changes have been made, tap here to reboot to undo those changes
4. I then read your solution and updated the CSC to INS from STH. And device got factory reset and for the first time I saw VoLTE logo on my phone :victory:
5. I finished the setup and still getting the same error in notification from SupportAgent. So I tapped on it, and device rebooted to a new blue screen with sim card logo on it and then boot up to system.
6. Now, in the quick settings, VoLTE toggle is gone and I got WiFi Calling toggle instead. However I still have the VoLTE icon on the status bar.
7. So later that day, I redo all the steps.
- Flashed Singapore firmware (This time, the CSC Country was Singapore and the active CSC was XTH instead of STH. There was VoLTE toggle)
- Flashed Cache from Indian Firmware (CSC Country changed to India the active CSC was INS automatically. Now got WiFi Calling toggle)
8. I noticed other changes in the software:
- The gallery App doesn't show Grid view so I'm stuck with List view
- The Samsung Pay says, its not supported for this device
What do you think about this?
Click to expand...
Click to collapse
are you still able to use voLTE ?? after these steps.
about Support agent. Ignore it if you can. or skip it. you do not need this as there aren't any official updates after this. (this is only because now system knows that you have modified it, and it will not receive any update. if you can the disable the Support agent app via settings or if possible via root.)
samsung pay will Not work. as knox should have been tripped to 0x1, so Samsung pay like apps will NEVER work after knox trip.
ksbalajee said:
Thanks for your help. I tried solution 1 and it Worked
However, before trying out your solution, my device was in this state:
1. Flashed Singapore ROM
2. Extracted every file from Indian rom and repacked the tar except the system.img (as this was failing to flash in odin)
3. After booting I got a notification from SupportAgent telling me that unauthorized changes have been made, tap here to reboot to undo those changes
4. I then read your solution and updated the CSC to INS from STH. And device got factory reset and for the first time I saw VoLTE logo on my phone :victory:
5. I finished the setup and still getting the same error in notification from SupportAgent. So I tapped on it, and device rebooted to a new blue screen with sim card logo on it and then boot up to system.
6. Now, in the quick settings, VoLTE toggle is gone and I got WiFi Calling toggle instead. However I still have the VoLTE icon on the status bar.
7. So later that day, I redo all the steps.
- Flashed Singapore firmware (This time, the CSC Country was Singapore and the active CSC was XTH instead of STH. There was VoLTE toggle)
- Flashed Cache from Indian Firmware (CSC Country changed to India the active CSC was INS automatically. Now got WiFi Calling toggle)
8. I noticed other changes in the software:
- The gallery App doesn't show Grid view so I'm stuck with List view
- The Samsung Pay says, its not supported for this device
What do you think about this?
Click to expand...
Click to collapse
i need to know too.. did volte worked after all? im doing the same thing but not working
prasadmanjulago said:
i need to know too.. did volte worked after all? im doing the same thing but not working
Click to expand...
Click to collapse
I have dropped that phone the very next day and got my screen shattered and entire display turned dark. I'm not sure whether it worked
ksbalajee said:
I have dropped that phone the very next day and got my screen shattered and entire display turned dark. I'm not sure whether it worked
Click to expand...
Click to collapse
There was a enfenforceskippingpackages.xml file.. deleted every line in there..it worked after..if anyone need more info, pm me or mail [email protected]