Hello
lm a newbie. I just flashed firefly 2.2 . I like it but they changed my phone dialer. I like the green one. How can I changed this. Also the kernel they use ring at 500mhz. Should I flash one thats 1000mhz? Maybe I have the wrong understanding of what a kernel is. Ive been reading and not finding the answers I need. Help????
Using Samsung Captivate
Rom: FireFly 2.2
Here is a link to themes for firefly:
http://forum.xda-developers.com/showthread.php?t=896339
The 6th post down there are a list of phone dials that you can flash. I believe they will work on FF. There are also many themes that you could flash over if you like those
Thanks. But can anyone answer the kernel question about Mhz? What does the kernel affect other thanks the modem?
Using Samsung Captivate
Rom: FireFly 2.2
patillo5 said:
Thanks. But can anyone answer the kernel question about Mhz? What does the kernel affect other thanks the modem?
Using Samsung Captivate
Rom: FireFly 2.2
Click to expand...
Click to collapse
from a quick google search
http://en.wikipedia.org/wiki/Kernel_(computing)
Thanks for the Wiki. That would be great if I understood it as it applies to android os. I am trying to see if I need to flash a new modem. Im with ATT. Wondered if all that Mhz might help me if I understood.
Using Samsung Captivate
Rom: FireFly 2.2
Related
I have done reading a lot of post recently.
I brick'ed my cappy once, I reflash the stock kernel, and it came back alive.
After that, I managed flashing my I897 into Foyo 2.2 and with Cog 2.4.1 Rom.
So far so good.
I am still very afraid of brick my cappy again.
So, I decided post question here, just to clear my mind.
If I wanna flash it into an I9000 Rom from Cog 2.4.1 Rom
What are the right steps ??
My current system config is listed here
Firmware 2.2
Baseband Version - I897 UCJJ4
Kernel Version - 2.6.32.9
Build Number - Cognition. v2.4.1
The best thing you can do is decide which i9000 Rom you want to flash to and read the OP of that thread for exactly how to flash. It is gonna require both odin and clockwork though. Which Rom are you wanting to go to?
Sent from my SAMSUNG-SGH-I897 using XDA App
Gurgs said:
The best thing you can do is decide which i9000 Rom you want to flash to and read the OP of that thread for exactly how to flash. It is gonna require both odin and clockwork though. Which Rom are you wanting to go to?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
From your opinion, which I9000 Rom is most popular ?? (This might be the best one i think)
Is it ganna be better than Cog's I897 rom ??
Really I prefer to stick with cognition but there is no denying that setirons kernel is the best one going right now but it doesn't play well with cognition. If I was going to go i9000 I would use mikeymikes conversion of docs Rom...it looks really nice and everyone in that thread loves it.
hey guys , i have flashed several rom and i really like the look and feel of the darky's rom however i have really bad reception issue. sometimes at home where i usually have full bar i have no signals at all , or last night i was traveling to Oklahoma city with my friend who is running captivate on stock rom and he had full bar while i had no service at all ! any idea what i'm doing wrong ?
Usually better to ask in the darky thread , but anyways.
Did you flash back to stock and then upgrade to darkys or did you upgrade on top of a previous rom? If the latter, flash back to stock and reinstall.
If the former, try a different modem. I am not using the modem or kernel that came with darkys rom. I am using the kernel with speedmod and ugjl2 modem and so far I have great reception. Of course that isn't saying much as I always have great reception using my cell device (can't think of its name atm.)
Sent from my GT-I9000 using XDA App
You are running the I9000 version and not the captivate port. This alone wont cause problems if you have the reoriented kernel but the jpy modem you have will. I believe it does not have the 850 band. Flash a different modem from the modem thread in the development section and you should be good to go.
If im mistaken please forgive as its 7:30am and I still haven't slept yet.
Sent from my GT-I9000 using XDA App
thanks for your reply ! well yea i did one click odin to stock 2.1 and then flash this using this guide http://forum.xda-developers.com/showthread.php?t=868262
and http://forum.xda-developers.com/showthread.php?t=808286 flashing xcaliburinhand's latest reoriented kernel (odin version) with voodoo (I9000_reoriented_v2.3.0) so i'm not sure what is the issue here ... can you all guide me what modem should i use ? i was actually thinking about the same thing because i use to have a phone that didn't have 850 bad and i had this kind of issue ! so any help of how and where to get a modem to flash will be greatly appreciated !
I personally use JK4. A lot of people find that JL3 works better for them. Either way at the moment these are the top two modems available. Both can be found here http://forum.xda-developers.com/showpost.php?p=9134296&postcount=2 and are flashable via CWM.
Also next time you are going to flash a version of Darky's just use this thread http://forum.xda-developers.com/showthread.php?t=890429 or any one that ytt3r starts because he ports them over to the captivate and you don't have to worry about messing with kernels or anything not working properly.
thanks i'll try it next week , since i'm running Axura 2.2 and so far i like it
Am I able to install the Voodoo lag fix on my Captivate? I know the AT&T version is supported but I rather not brick my device. Please respond!
Thanks,
Androidfann
I have a Rogers Captivate, and I have used Voodoo for a while.
Make sure you have root access, and go nuts. It really does improve the quality.
have u used voodoo with 2.2?
i just got the captivate and am now on stock 2.2 with root and oclf installed. is it worth changing to voodoo?
ssjkakarot said:
have u used voodoo with 2.2?
i just got the captivate and am now on stock 2.2 with root and oclf installed. is it worth changing to voodoo?
Click to expand...
Click to collapse
OCLF uses ext2, which is less safe than ext4, which is used by Voodoo. If you want Voodoo, flash the JJ4 + Voodoo kernel in the dev section.
ssjkakarot said:
have u used voodoo with 2.2?
i just got the captivate and am now on stock 2.2 with root and oclf installed. is it worth changing to voodoo?
Click to expand...
Click to collapse
Depends. The newer Kernals really unlock a lot of features that we didn't have before, and you don't have now.
If you use your phone as your media player, than the benefits of Voodoo sound were enough to make me switch.
hey guys, i got the official rogers 2.2, can i still use voodoo? what good roms use rogers 2.2 as a base and include voodoo? any suggestions?
Hey folks, another Canadian Rogers Captivate user here...just wanted to confirm if I can use the Voodoo stable 5.4.1 for Froyo 2.2.1 as it looks like I'm on 2.2 stock (and rooted)? I'm new to android and a bit scared, but the Voodoo fix seems easy enough..
No one seems to be answering the main question posed here.
For us STOCK Rogers froyo users which version of voodoo should we use?
I am not running a custom rom, I have not used Odin (used Kies to install official froyo update). I can't seem to find a version of voodoo lagfix specifically for stock Rogers 2.2. If anyone e has it installed can you point us in the right direction?
Sent from my SAMSUNG-SGH-I896 using XDA App
Flash the .tar version of this http://forum.xda-developers.com/showthread.php?t=893880
Using this version of ODIN http://dl.dropbox.com/u/20958367/Odin3 v1.3.exe
If you need further instruction to do so, PM me and I will walk you through it.
Thanks for the reply..i havent read much about speed mod. Am I to understand theres no voodoo option for rogers 2.2?
Sent from my SAMSUNG-SGH-I896 using XDA App
Hi there to all asking about Voodoo for Rogers,
I have tried suckerpunch (based on speedmod)
Also tried the newest speedmod 13c
No problems with either.
I personally have tried voodoo (5.4.1 and the one for att captivate) with no luck at all.
phrenicthenub said:
Thanks for the reply..i havent read much about speed mod. Am I to understand theres no voodoo option for rogers 2.2?
Sent from my SAMSUNG-SGH-I896 using XDA App
Click to expand...
Click to collapse
People have been using the SpeedMod kernel which is the Rolls Royce of kernels; it enables a lot of the Captivates features and power. However, the Kernel is based on the i9000 kernel, which is the sister handset to the Captivate. The kernels are compatible across both phones, but the stock modems on captivates don't seem to do as well with some setups; you'll see this in the sprawling thread dedicated to that topic. Some people will flash an i9000 modem as well, and people seem to have varying results with different combinations.
Having said that, if you don't want to use bluetooth, the stock modem is perfectly serviceable. You could go ahead and flash your SpeedMod kernel and see vast improvements is phone function without tweaking in the handset's general recovery menu. There's also plenty there to keep the tweaksters busy
However, new to the scene is the same developers amalgam of his voodoo lagfix in a stock Rogers Froyo kernel. I'm running it now and I am still testing and checking things, but it seems fine though. There are some caveats to respect though, I just spent nearly an entire day getting my phone back to Stock Froyo after doing a bad job of 'un'lagfixing before flashing kernels. However, if it's your first endeavour into flashing or modifying your phone's software, it would be a relatively safe bet. You should not have any lagfix installed nor should you even think about doing it without doing a Titanium Backup of your phone, which would mean rooting.
Hope that helps a bit.
Clemmei.. I saw in the description of your phone that has the official version of Gingerbread 2.3.3 AT&T Gingerbread in your captivate ... How did you install, by odin? I have a Captivate I897 UCKB1, i´m interested in this oficial Rom.. Works fine?? And what version i need to chose for my modems.. Thanks!!
lapiz1618 said:
Clemmei.. I saw in the description of your phone that has the official version of Gingerbread 2.3.3 AT&T Gingerbread in your captivate ... How did you install, by odin? I have a Captivate I897 UCKB1, i´m interested in this oficial Rom.. Works fine?? And what version i need to chose for my modems.. Thanks!!
Click to expand...
Click to collapse
There is a 1-click Gingerbread UCKF1 thread in the dev forum. Thats what I am currently running and its working well so far.. The only issue I have is my GPS is crap.. but it was crap with stock froyo aswell so no big deal there.
I'm on the rogers i896 also.
erbsmokah said:
There is a 1-click Gingerbread UCKF1 thread in the dev forum. Thats what I am currently running and its working well so far.. The only issue I have is my GPS is crap.. but it was crap with stock froyo aswell so no big deal there.
I'm on the rogers i896 also.
Click to expand...
Click to collapse
But this rom is official, created by the AT&T..?? Or not?? Thanks for your quick response..
lapiz1618 said:
But this rom is official, created by the AT&T..?? Or not?? Thanks for your quick response..
Click to expand...
Click to collapse
It's sort of officially unofficial. It would seem to be a prebuild for a forthcoming Gingerbread release, it's tight and a great daily driver.
I did use Odin; follow the usual safety procedures and all will be well. The modem that comes with the package is great, but my 4G no longer works, it's 3G for now, but I got terrible 4G speeds anyway, so there's not much of a downgrade there.
The GPS did not function so great straight away, but I keyed in the code *#3214789650# - Settings - SUPL Settings, and changed the server to supl.google.com and the server port to 7276. I got much better results from that configuration.
Hope that helps!
Thanks for the help of gps friend ... I have it installed and this great .. But you have some voovoo installed, can not find any on the net .. The voodoo 5.5.x served me just to change the start GTI9000, I do not like .. Thanks for your help..
OK, I'm running Cognition 3.04 with the Speedmod Kernal.
People are telling me they can't understand me on the phone. For what I've learned through flashing over the past few months and reading around, I believe I need a different radio. Am I wrong? If not, can someone point me in the right direction?
I've seena few references to radios on here, but never with a link or a better explanation as to what details I need to look out for.
Thanks for any help.
check out the modem thread. its a sticky in android development.
Code:
http://forum.xda-developers.com/showthread.php?t=835272
diablo009 said:
check out the modem thread. its a sticky in android development.
Code:
http://forum.xda-developers.com/showthread.php?t=835272
Click to expand...
Click to collapse
OK, so should I be looking for modems then? 'Cause I went through that thread and flashed both UCJJ4 and UCJI6 (one at a time of course) but neither fixed the issue.
the problem is not your rom, but your modem, i believe. try jl2, jk4 if you are on i9000 rom.
mengbo said:
the problem is not your rom, but your modem, i believe. try jl2, jk4 if you are on i9000 rom.
Click to expand...
Click to collapse
+1
Try JK4.
mengbo said:
the problem is not your rom, but your modem, i believe. try jl2, jk4 if you are on i9000 rom.
Click to expand...
Click to collapse
Hmm...Cognition is made specifically for Captivate...was it wrong to assume is was a i867 ROM?
Is there an easy way to tell on the phone which model my ROM is built for? The "Baseband Version" reads I897UCJI6. Is that a hint?
Thanks for your help guys.
Your problem is you're using an i9000 kernel with a captivate modem. Cog is considered a pure captivate rom, so if you installed speedmod (which is based on an i9000 kernel) you need an i9000 modem. I think JK4 seems to be the most popular
Sent from my SAMSUNG-SGH-I897 using XDA App
Arg! But I installed the Speedmod Kernel made for Captivate!
http://forum.xda-developers.com/showthread.php?t=893880
This is so frustrating...I'm trying to not be a newb and figure this stuff out, but things that say they're for i897 aren't...ugh.
Well, I flashed JK4 and it works. So I guess the speedmod for Captivate isn't actually for Captivate.
toekneebullard said:
Arg! But I installed the Speedmod Kernel made for Captivate!
http://forum.xda-developers.com/showthread.php?t=893880
This is so frustrating...I'm trying to not be a newb and figure this stuff out, but things that say they're for i897 aren't...ugh.
Well, I flashed JK4 and it works. So I guess the speedmod for Captivate isn't actually for Captivate.
Click to expand...
Click to collapse
Things that are for the captivate are for the captivate and the version of the speedmod kernel you flashed from the captivate forum is for the captivate, but...
What everyone is talking about above is what those things were ORIGINALLY designed and built for. In short most things out there were originally built for the i9000 (since AT&T is dragging their feet on releases) and then ported over to the captivate, meaning the code, config, etc. is changed a bit to work with the captivate. So what everyone is saying above is that speedmod started as an i9000 kernel and works best with an i9000 based modem.
Hello, hopefully this hasn't been posted anywhere before, I couldn't find anything on it though. I have Perception 10.4 on my Captivate, and as you might know it is a I9000 based rom. I want to flash to Darkyy's Extreme Edition 9.3 for Captivate and I just have some questions about it.
1.) Should I just follow the instructions given on Darkyy's page?
2.) Do I need to flash a different kernel or modem?
3. Is there anything else I should know?
Thanks guys, any help would be greatly appreciated.
Here are the links to the Darkyy's Rom and Perception, in that order.
http://forum.xda-developers.com/showthread.php?t=942046
http://forum.xda-developers.com/showthread.php?t=897538
Thanks again.
Edit: I'm dumb, I have Perception 10.1 and not sure if that is I9000 or not. Sorry about the confusion.
Bump
Anyone?
I'm currently running it and followed most directions to b safe so I'd just flash tht Odin file he provides n then flash the rom
i love all roms
Sounds good, thanks man. So it is a pretty good rom?
yugotprblms said:
Hello, hopefully this hasn't been posted anywhere before, I couldn't find anything on it though. I have Perception 10.4 on my Captivate, and as you might know it is a I9000 based rom. I want to flash to Darkyy's Extreme Edition 9.3 for Captivate and I just have some questions about it.
1.) Should I just follow the instructions given on Darkyy's page?
2.) Do I need to flash a different kernel or modem?
3. Is there anything else I should know?
Thanks guys, any help would be greatly appreciated.
Here are the links to the Darkyy's Rom and Perception, in that order.
http://forum.xda-developers.com/showthread.php?t=942046
http://forum.xda-developers.com/showthread.php?t=897538
Thanks again.
Edit: I'm dumb, I have Perception 10.1 and not sure if that is I9000 or not. Sorry about the confusion.
Click to expand...
Click to collapse
Just follow the OP for darkyy's 9.3! Do part 1 and part 2 as given in the instructions. And be sure to select Wipe in the DarkyRom Configurator in Part 2 to avoid issues with a new base JS5.
If you have any issues with installation, ask in that thread and anyone there would help u out!
I like it but I haven't flashed a rom I haven't liked
i love all roms
Just read the instructions as they are clear for what is necessary. Each step in the process works and you don't need to do anything different unless you choose to change modem or kernel after you install 9.3 Captivate version.