What's the best method to clean the NC's screen? Microfiber cloth? What about cleaning solutions if super dirty? Friend's kid put a greasy hand print on screen that took forever to get off with just microfiber cloth.
My son used to work at Circuit City before it folded, and he brought me one of those Monster kits for cleaning PC screens, it includes a bottle of spray and a microfiber cloth. I used it on my NC and it worked very well. I expect it is an overpriced version of stuff you can get cheaper elsewhere.
To clean all my electronic, I use 1 part isotoypal alchohol and 1 part water. Using lint free cloth wipe and let dry.
Sent from my ADR6300 using XDA App
The best way is a little bit of Windex or 409 sprayed on a paper towel and wipe the screen gently. Dry it off and then use a microfiber cloth.
Be careful to not get any liquid on the plastic sides, as it will discolor the plastic.
Paul22000 said:
The best way is a little bit of Windex or 409 sprayed on a paper towel and wipe the screen gently. Dry it off and then use a microfiber cloth.
Be careful to not get any liquid on the plastic sides, as it will discolor the plastic.
Click to expand...
Click to collapse
In that case, I wouldn't recommend this method! Lens cleaning solution on a soft cloth or lint free lens wipe is best. Keep clean with a microfiber cloth.
Cheers,
kev
bugeyed1 said:
In that case, I wouldn't recommend this method! Lens cleaning solution on a soft cloth or lint free lens wipe is best. Keep clean with a microfiber cloth.
Cheers,
kev
Click to expand...
Click to collapse
Sure, but it's the only way to kill off bacteria. And the NC screen gets gross very quickly.
The 1/1 isopropyl/water is what I use on my screen if I know it's safe to use. Wasn't sure if the NC had any sort of screen coating that wouldn't like the isopropyl. Thanks for the replies.
bugeyed1 said:
In that case, I wouldn't recommend this method! Lens cleaning solution on a soft cloth or lint free lens wipe is best. Keep clean with a microfiber cloth.
Cheers,
kev
Click to expand...
Click to collapse
Windex is fine, it will not stain...
I would never use 409 to clean a screen or plastics, it has very harsh chemicals.
I always use the solution that i clean my eyeglasses with. Go to your local Lens Crafters or what have you. They'll have small spray bottles and lint-free cloths that are ideal (that won't harm the bezel if you have overspray)
Jgrimoldy said:
I always use the solution that i clean my eyeglasses with. Go to your local Lens Crafters or what have you. They'll have small spray bottles and lint-free cloths that are ideal (that won't harm the bezel if you have overspray)
Click to expand...
Click to collapse
I agree with the eyeglass cleaner, but you shouldn't have any overspray, 'cause you should spray the cloth & then wipe the screen. You don't want to spray anything directly on the screen, 'cause it can run under the bezel & get inside. Glasses are ok, 'cause they don't have very many electrons running around inside.
Cheers,
kev
bugeyed1 said:
I agree with the eyeglass cleaner, but you shouldn't have any overspray, 'cause you should spray the cloth & then wipe the screen. You don't want to spray anything directly on the screen, 'cause it can run under the bezel & get inside. Glasses are ok, 'cause they don't have very many electrons running around inside.
Cheers,
kev
Click to expand...
Click to collapse
I use use glass cleaner myself as well for... well, pretty much everything with a display. If you buy a bottle at either WalMart or Sunglass Hut they have free refills too. I've been using the same bottle from Sunglass Hut that came with one of my pairs of oakleys for years, and I just get it refilled whenever I'm near a mall. At one point, I accidentally smashed my container in the parking lot when I dropped it and it got ran over. I took it in and asked them to throw it away while I bought a new one. Instead, they told me they would just replace it for free as well. It works fantastic, refills for life makes it very cheap, no risk of damaging anything, and it might just be my imagination but it seems to help with glare a little too.
snives said:
I use use glass cleaner myself as well for... well, pretty much everything with a display. If you buy a bottle at either WalMart or Sunglass Hut they have free refills too. I've been using the same bottle from Sunglass Hut that came with one of my pairs of oakleys for years, and I just get it refilled whenever I'm near a mall. At one point, I accidentally smashed my container in the parking lot when I dropped it and it got ran over. I took it in and asked them to throw it away while I bought a new one. Instead, they told me they would just replace it for free as well. It works fantastic, refills for life makes it very cheap, no risk of damaging anything, and it might just be my imagination but it seems to help with glare a little too.
Click to expand...
Click to collapse
Niiiiice!
Related
I haven't put one on mine (yet). I have a case that does cover the screen, but who knows something will slide in between and rub up against the screen.
That being said, who HASN'T put on a screen protector and doesn't plan to? I'm kind of against them because not only do I struggle with putting them on, I always find some imperfections (which drives me bonkers).
Just got mine two days ago. Rooted it. Loaded apps. Lovin it and finally, to get to your question, no I have not and don't plan on getting one. Never use them on phones so I don't plan on starting. I really don't think they are needed and I also think they degrade the screen performance. I could be wrong but JMO.
I haven't put one on, have thought about it but since I got my case haven't found the need. I just give it a good wipe of my microfiber cloth once in a while.
I bought some, but putting it on became quite a hassle. I touched the sticky side of one putting a nice fingerprint on it (arg), and I can NEVER get all of the dust / air-bubbles out, so it ends up just driving me nuts.
I ended up trashing them.
If you buy the screen protectors at a B&N store, they will install for you at no extra charge. Plus you get a microfiber cloth. I haven't noticed any degrade in screen performance.
I put the anti-glare screen protector on the day I got my NC. I've been happy with it and the anti-glare version goes on incrediblincredibly easy as it's a bit thicker than the regular kind. Just thought I'd share for those of you who want one but hate putting them on.
MkFly said:
I bought some, but putting it on became quite a hassle. I touched the sticky side of one putting a nice fingerprint on it (arg), and I can NEVER get all of the dust / air-bubbles out, so it ends up just driving me nuts.
I ended up trashing them.
Click to expand...
Click to collapse
I did the exact same thing.
I did not have one on mine as I plan on trying to exchange it again, but I bought a screen protector for a laptop from $5 Below and cut it to fit..
Works nicely
While I know B&N would put one on for me, I have other things to spend the $15 (or so) dollars on. Plus there's no guarantee the person there will install it to meet my OCDness.
I haven't and i don't plan to.
Sent from my nook COLOR.
swest6602 said:
I put the anti-glare screen protector on the day I got my NC. I've been happy with it and the anti-glare version goes on incrediblincredibly easy as it's a bit thicker than the regular kind. Just thought I'd share for those of you who want one but hate putting them on.
Click to expand...
Click to collapse
Same here, I put mine on about 15 minutes after opening it. Haven't had any problems. I used the water/baby shampoo spray with it that came with my BodyGaurdz for my phone and it went on without any problems. Within 20 minutes all the water was gone and the protector wasn't even noticeable
MkFly said:
I bought some, but putting it on became quite a hassle. I touched the sticky side of one putting a nice fingerprint on it (arg), and I can NEVER get all of the dust / air-bubbles out, so it ends up just driving me nuts.
I ended up trashing them.
Click to expand...
Click to collapse
I feel that Im pretty good at putting them on. I use the dry install type like Realook for all my phones and the B&N anti glare for the NC. This is what I do if you ever want to give it a try. Make sure everything is laid out and ready. Turns fans off if your room has one, close windows, etc..
Wash your hands throughly, important that all oil comes off
Spray the air with some sort of cleaner. My favorite is Monster Cable LCD TV cleaner
Clean the device with cleaner and microfiber cloth
Spray air again around your area you are working, wait a few secs for it to fall from air
Remove a very small portion of the backing enough to line up the entire bottom edge of protector
with protector lined up, use a credit card or squeegee to push protector on while backing automatically comes off all the way up.
this leaves minimal bubble and works for me almost every single time. your hands really never touch any sticky side and when you slide the squeegee up it automatically removes the backing for you. I have yet to trash a protector and have to get another. if you have dust, then carefully pull back and use a toothpick to get the dust particle off and reapply. Hope this helps someone.
HotShotAzn said:
While I know B&N would put one on for me, I have other things to spend the $15 (or so) dollars on. Plus there's no guarantee the person there will install it to meet my OCDness.
Click to expand...
Click to collapse
I second that OCDness!
Sent from my rooted NookColor using XDA app
i bought this tablet over other comparable android tabs (gtab, archos, etc) due to its beautiful screen. no way im putting a screen protector over it. i use one on my phone, but only because it travels in my pocket.
I bought the anti-glare protector from B&N. I used a microfiber cloth thing that came with this windshield cleaning kit I got for Christmas to clean the screen and went over it a few times with the supplied cloth to remove dust. I was able to apply the protector without trapping a single air bubble, piece of lint, fingerprint or anything else. While it hasn't done much for reducing glare, it has helped tremendously with fingerprint grease and in reducing the friction between my finger and the screen.
Sent from my NookColor via the XDA app.
t140568 said:
I bought the anti-glare protector from B&N. I used a microfiber cloth thing that came with this windshield cleaning kit I got for Christmas to clean the screen and went over it a few times with the supplied cloth to remove dust. I was able to apply the protector without trapping a single air bubble, piece of lint, fingerprint or anything else. While it hasn't done much for reducing glare, it has helped tremendously with fingerprint grease and in reducing the friction between my finger and the screen.
Sent from my NookColor via the XDA app.
Click to expand...
Click to collapse
This sums up my experience as well. It's worth it just for the fingerprint protection.
techboydino said:
I feel that Im pretty good at putting them on. I use the dry install type like Realook for all my phones and the B&N anti glare for the NC. This is what I do if you ever want to give it a try. Make sure everything is laid out and ready. Turns fans off if your room has one, close windows, etc..
Wash your hands throughly, important that all oil comes off
Spray the air with some sort of cleaner. My favorite is Monster Cable LCD TV cleaner
Clean the device with cleaner and microfiber cloth
Spray air again around your area you are working, wait a few secs for it to fall from air
Remove a very small portion of the backing enough to line up the entire bottom edge of protector
with protector lined up, use a credit card or squeegee to push protector on while backing automatically comes off all the way up.
this leaves minimal bubble and works for me almost every single time. your hands really never touch any sticky side and when you slide the squeegee up it automatically removes the backing for you. I have yet to trash a protector and have to get another. if you have dust, then carefully pull back and use a toothpick to get the dust particle off and reapply. Hope this helps someone.
Click to expand...
Click to collapse
I have learned that going in the bathroom, turning on the shower and allowing the steam to take the dust out of the air is the only way to ensure that there are no air bubbles.
I also have nearby some scotch tape so that if there is a speck of dust or lint, I can apply the tap to the sticky side of the screen protector without getting my fingerprints all over it.
techboydino said:
I feel that Im pretty good at putting them on. I use the dry install type like Realook for all my phones and the B&N anti glare for the NC. This is what I do if you ever want to give it a try. Make sure everything is laid out and ready. Turns fans off if your room has one, close windows, etc..
Wash your hands throughly, important that all oil comes off
Spray the air with some sort of cleaner. My favorite is Monster Cable LCD TV cleaner
Clean the device with cleaner and microfiber cloth
Spray air again around your area you are working, wait a few secs for it to fall from air
Remove a very small portion of the backing enough to line up the entire bottom edge of protector
with protector lined up, use a credit card or squeegee to push protector on while backing automatically comes off all the way up.
this leaves minimal bubble and works for me almost every single time. your hands really never touch any sticky side and when you slide the squeegee up it automatically removes the backing for you. I have yet to trash a protector and have to get another. if you have dust, then carefully pull back and use a toothpick to get the dust particle off and reapply. Hope this helps someone.
Click to expand...
Click to collapse
Thanks, I think I might have to have another go at it.
Been naked on 4 previous smart phones. Currently naked on DroidX, Viewsonic Gtab and Nook color. Haven't had any problems with any of the devices.
My phones i usually put one on there because i put it in and out of pocket but Nook color is also naked for me besides a Hard case snap cover I got off eBay.
So I bought a vertical leather pouch, apparently the offical T-Mobile one. Used my HD7 with it for a few days until my clear coloured argyle silicone case arrived. Went from the leather pouch and to the silicone case every few days and now I've noticed an odd stain/discolouration on the bottom part of the back case!?
I can't tell if it's the black coming off the leather pouch or if it's coming off the silicone case but I'd get it cleaned off! The diamond shapes in the stain make me think it's from the silicone case but it's not black so I'm entirely sure where it's coming from but it's getting worse
Any ideas anyone on how to safely remove this stain without ruining my back cover? I tried soap & water, pencil eraser, magic eraser, lysol wipes.. I'm afraid to go with a harsher chemical.
have you tried rubbing it in circles (medium to hard pressure) using a microfibre cloth (dry)? maybe the phone heat (which is usually on that location) caused some reaction with the plastic case and/or pouch ur using (especially the cases are tight)?
dude im having the same prob and i dont have any case windex seems to work ok for me though
bluegreenwhite said:
have you tried rubbing it in circles (medium to hard pressure) using a microfibre cloth (dry)? maybe the phone heat (which is usually on that location) caused some reaction with the plastic case and/or pouch ur using (especially the cases are tight)?
Click to expand...
Click to collapse
I haven't tried a microfibre cloth. Not sure I have one. Are those the cloths used to clean LCD screens?? Anyway I also tried "Goo Gone" best known for removing the sticky stuff after peeling off tape or stickers but even that had no effect on this damn stain. I tried rubbing it softly with a q-tip and with a harsher cloth.
I haven't tried Windex yet. Maybe my issue is not cleaning right after it stained. But it's almost like this material of the casing is working against me and not easy to clean.
mines starting to do the same thing plus im not using a case
Yup, microfiber cloth used for cleaning the LCD (not the cheap ones that comes with some of the screen protectors). hope the stain problem gets resolved soon!
bluegreenwhite said:
Yup, microfiber cloth used for cleaning the LCD (not the cheap ones that comes with some of the screen protectors). hope the stain problem gets resolved soon!
Click to expand...
Click to collapse
Wow..
I just tried the microfiber and nothing.. Tried Magic Eraser again and nothing.. Tried Windex on a paper towel and nothing. Scrubbed hard too
This is ridiculous. And it's not like I can buy that piece to replace mine either. I don't care so much about the stain but I know when I sell it down the road the next person will cry about it. And I'd hate to this of having to discount the phone for some annoying stain.
Anyone know if I can buy the 2 piece replacement backing anywhere?? Should I try calling HTC for it maybe?
I unfortunately had a nose bleed and a drop of blood fell on the Gorilla Glass screen of my Samsung Galaxy S i9000.
I used one of these wet wipes on the screen, then wiped it off with a damp paper towel. http antibac.no/alias.html?id=1034312
The solvent contains denatured alcohol, glycerol and is meant as a hand sanitizer. Now I'm worried that I've damaged the glass or Super AMOLED on the phone. Have i damaged the screen/gorilla glass?
its very very very hard to damage the screen. so if you don't see any damage then its okay.
**DamianGTO Steam kernel. 350MB Ram. 500HZ. all ext2. Steam Rom. Js5**
It's a form of hardened glass, not a plasticky gimicky display.
If you wouldn't expect standard glass to be damaged, you wouldn't expect this to be...
I've read different places that they have thin plastic film over the screens on various glass displays. Well the phone looks and behaves in perfect condition, I love my Galaxy S!
Yea, it's fine, don't worry you'll give yourself a nosebleed.
i didn't have any nose bleeds
but my screen is really dusty. lots of smudges.
the sides and corners gathered quite a bit of dirt.
whats the usual method to clean it, and make it look brand new again
Just get a decent micro-fibre cloth for cleaning the screen.
Works for me ...
Sent from my GT-I9000 using XDA App
I can't answer your question about possible damage but I can tell you what works for me.
I normally use either glasses cleaner (alcohol based) or my own solution of about 50/50 isopropyl alcohol and distilled water with a lens tissue. When I'm on the go I use Optico cleaning wipes. They work really well but they are a little more expensive than the aforementioned wipes & glasses cleaner method. http://www.optico.ca/eng/products_optico_list_1.php
I'm on my second Galaxy S but both phones never had a single scratch or damage. I love Gorilla Glass!
Ziostilon said:
i didn't have any nose bleeds
but my screen is really dusty. lots of smudges.
the sides and corners gathered quite a bit of dirt.
whats the usual method to clean it, and make it look brand new again
Click to expand...
Click to collapse
I used to get them a lot when I was a kid, rarely happens anymore... maybe a bit too much information for this forum?
It's a great phone, BEST phone I've owned. I only wish the battery cover was of as solid material as the rest of the phone.
When I'm on the go... The T-shirt I'm wearing does the job.
electrotune1200 said:
When I'm on the go... The T-shirt I'm wearing does the job.
Click to expand...
Click to collapse
Hahaha same
Sent from my GT-I9000 using XDA App
Glass is a glass, its chemically resistant to most of things like gasoline, alcohol...
use the chamois cloth damped in mild soapy water
i'm cleaning it with a microfiber clean thing
my screen doesn't seem to get dirty, or smudgey? Well it gets slightly smudged when I use it but next time I get it out my pocket it's clean again. This gorilla glass seems pretty resistant to smudges
LOL this happend also too me.
My bro putted a screenprotector on my mobile(not the galaxy s but the lg 2x and it also has gorilla glass). Before placing he cleaned my mobile screen with wet wipes that had a skin-friendly care lotion
It is alcohol free and also skin-friendly because of a PH of 5,5
I was reading on internet at moment about people saying that you must not do this. The coating of the mobile screen will get removed etc because of alcohol and other things.
So i don't need too worried when i read this right?
electrotune1200 said:
When I'm on the go... The T-shirt I'm wearing does the job.
Click to expand...
Click to collapse
+1 that works just fine for me too! lol
I've scratched my screen. It's a little scratch, but it's here and I don't understand how I made it.
What can I do?
electrotune1200 said:
When I'm on the go... The T-shirt I'm wearing does the job.
Click to expand...
Click to collapse
Seriously now, just one thing there is NO plastic/organiglass/plexi film on the Gorilla Glass on SGS, as it wasn't on HD2.
considering that - there is no risk that any organic solvent can damage it (in fact, from inorganic chemicals, only hydrofluoric acid and strong alkalis can do it).
HOWEVER: there is ALWAYS the risk, that the solvent will penetrate, and damage the silicon/rubber seal around the glass, and will enter the phone crevices, where it MAY cause some damages to the covered by paint electronics.
Gorilla flashgun is a pretty strong glass but still I have a very mall scratch and a big one at lower corner.
hit thankxx if i helped. sent from my mind through telepathy (ya its possible)!
Any ideas
Sent from my ADR6410LVW using xda app-developers app
Skinomi screen protector. Scratches will not show unless they are really deep.
Sent from my SM-N900V using Tapatalk
Ouch! Sorry to hear that... That's why on my second Pebble, I put a screen protector on right away.
I've read people advise using toothpaste and soft cloth to try to buff it out.
Sent from my SGH-I717D using Tapatalk
Use DISPLEX Display polish! My scratches are away. But it need much time to polishing!
Done with Tapa and One
I've read you can buff out scratches but that it has an anti-glare coating. I'm wondering if this will be effected?
nrfitchett4 said:
I've read you can buff out scratches but that it has an anti-glare coating. I'm wondering if this will be effected?
Click to expand...
Click to collapse
Think of buffing as really low grit sanding. You're just sanding down the area around the scratch to remove it, for instance, with abrasive toothpaste. So yes, you would lose any coating if the scratch went through that layer. You would need to buff the entire surface, otherwise the area where the scratch was would look matte whereas the rest of the watch would be glossy. The only alternative, aside from a screen protector, would be to fill the scratch with something. I've heard that gel toothpaste absent breath enhancing flecks or whatever would work for filling.
I agree with everyone else here. I bought this
http://www.amazon.com/Polywatch-Pla...UTF8&qid=1391982006&sr=8-1&keywords=polywatch
And a skinomi screen protector right after I polished. I didn't have deep scratches but it definitely got the little ones I had on there.
Sent from my Nexus 5 using xda app-developers app
Rubbing Compound
Sold a second pebble I bought this morning. Put some rubbing compound on it with a tissue and then rubbed it off with an old clean shirt sleeve. The face looked fresh out of the plastic. Doing it to my daily watch tonight!
I use a product called Liquid Armour, just have to place a new coat every six months. Use it on all my phones as well...
URL http://www.dynaflousa.com/product_info.php?products_id=127
ajack2001my said:
I use a product called Liquid Armour, just have to place a new coat every six months. Use it on all my phones as well...
URL http://www.dynaflousa.com/product_info.php?products_id=127
Click to expand...
Click to collapse
Does the old coat peel off easily when you want to apply a new coat, or do you just add to what's there?
JimSmith94 said:
Does the old coat peel off easily when you want to apply a new coat, or do you just add to what's there?
Click to expand...
Click to collapse
I just re-apply a new coat on top of the screen...
Toothpaste - must be slightly gritty, can't use gel-type .
1: Examine your Pebble and look for the area with the most scratches. It is best to hold it up to a bright light at an angle.
2: Get the toothpaste of your choice and squeeze a small amount onto the screen.
3: Rub the toothpaste around in a circular motion while applying gentle pressure. Focus on the areas with the most scratches.
4: After rubbing the toothpaste around for about 2-5 minutes, rinse off the Pebble with water. Examine the screen and repeat if necessary.
Hello gyuz,
As mentioned in another thread in Accessories sub-forum, while Installing the Whitestone Dome Screen Protector (https://www.whitestonedome.com/) on my Samsung Galaxy Note 8, there was UV glue spillage all around the phone & now I have dried (UV cured) glue in the tiniest gap between the screen edges and the metal frame of the phone. Please check attached image, I have circled with red the exact location of the glue, however imagine this almost all around the phone:
Now I need a good UV glue remover to soften the dried glue and an extremely thin blade (or a similar tool) to reach in the gap and remove it. I saw some products on ebay, however I am not sure which will do the job.
First of all which Glue Remover is more suitable? Does it have to be a branded one? Or the unbranded ones will do the job as well? Is there danger that the remover will dry and stay in the gap making it worse? Will it damage the color or consistency of the metal frame? Will it damage the buttons (Power, Volum, Bixby)?
Secondly, which tool should do the job reaching such tiny gap while at the same time not scratching the screen or the metal frame? Metal Blade? Plastic Blade? Wire? Some other tool?
Please advise, as I am nearly desperate. Thank you!
Damn, I'm sorry you're having to deal with this. This is one of the biggest reasons why I don't use screen protectors on my phones. I've used a glass one on my Note 5 but didn't like it. Naked display feels the best and performs the best. Not fuss, no glue, no BS. Eeek!
roaduardo said:
Damn, I'm sorry you're having to deal with this. This is one of the biggest reasons why I don't use screen protectors on my phones. I've used a glass one on my Note 5 but didn't like it. Naked display feels the best and performs the best. Not fuss, no glue, no BS. Eeek!
Click to expand...
Click to collapse
Agree with everything. if i had the chance again I would leave it naked, however I would still feel very uncomfortable without protection.. Actual screen exposed to everything is a little risky!
OP, wish I could advise you, but all I can say is take your time and don't rush this task. Since as you aware, you don't want to use a chemical or item that will damage the frame or buttons. Don't use any metal objects.
Feel for you bro, you go ahead with good intentions to protect your device and now in a predicament.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
OP, wish I could advise you, but all I can say is take your time and don't rush this task. Since as you aware, you don't want to use a chemical or item that will damage the frame or buttons. Don't use any metal objects.
Feel for you bro, you go ahead with good intentions to protect your device and now in a predicament.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Thanks for your understanding mate. Indeed tried for the best and ended up worse.
I am not rushing for now, just conctacted Whitestone themselves asking advise on how to fix it, as well as an ebay seller that sells such equipment/tools. He suggested me these:
http://ebay.eu/2g3RySr
http://ebay.eu/2kATYJV
I am not sure about the quality of the Glue Remover and how thin the tools (blades & spudger) are though. Have to make a little research.
That is why also I opened the thread to ask for opinions from people that may have done this or similar task before and to help others in the future.
Warlord1981 said:
Thanks for your understanding mate. Indeed tried for the best and ended up worse.
I am not rushing for now, just conctacted Whitestone themselves asking advise on how to fix it, as well as an ebay seller that sells such equipment/tools. He suggested me these:
http://ebay.eu/2g3RySr
http://ebay.eu/2kATYJV
I am not sure about the quality of the Glue Remover and how thin the tools (blades & spudger) are though. Have to make a little research.
That is why also I opened the thread to ask for opinions from people that may have done this or similar task before and to help others in the future.
Click to expand...
Click to collapse
Before using any chemicals, I would try and use the finest /thinnest plastic card or tool to scrape the glue out of the edges first. Chemicals would be my last resort. Good luck my friend.:good:
roaduardo said:
Damn, I'm sorry you're having to deal with this. This is one of the biggest reasons why I don't use screen protectors on my phones. I've used a glass one on my Note 5 but didn't like it. Naked display feels the best and performs the best. Not fuss, no glue, no BS. Eeek!
Click to expand...
Click to collapse
I have dropped my phones at least 5 times in the last year and each time it landed screen side down. I broke all 5 glass protectors but never the screen. That is why I must have a full adhesive glass protector on. It is a PITA to get perfect but for me, it's worth it.
Mike02z said:
I have dropped my phones at least 5 times in the last year and each time it landed screen side down. I broke all 5 glass protectors but never the screen. That is why I must have a full adhesive glass protector on. It is a PITA to get perfect but for me, it's worth it.
Click to expand...
Click to collapse
I understand, some people need it. I haven't chipped or broken a display since I had an iPhone. Knock wood. Naked is glorious, though.
Plastic tools and alcohol are your friends.
99% Isopropyl should be able to dissolve the glue, and shouldn't leave a mark on the phone (iso evaporates completely and is not dangerous to plastics or metals). A stiff bristled plastic brush would be ideal, maybe an old toothbrush. The thinner and stiffer the bristles, the better.
The iso will dissolve the glue, but you'll need to mechanically agitate it to remove it completely. Bear in mind that traces of iso having touched the glue will streak glass , so a second/third rinse with iso may be necessary.
I'd be careful about getting iso into the switches, as long term iso can degrade rubber (switch seals etc) but as long as you clean, then dry out effectively there shouldn't be an issue (iso will evaporate at room temp in any case). Covering the switches with tape could help, but iso is so thin it will probably go under the tape, and will likely dissolve the glue on the tape too!
e: Whatever you do don't use acetone or any other stronger solvent. Depending on the plastics used acetone will eat right through them, and may affect the finish on other parts too.
Iso really is a decent cleaning solution for most electronic devices.
e ii: Oh, and if you use an old toothbrush, make sure it's very clean. Getting some toothpaste grit on the screen and rubbing it in with a brush would be tragic. Maybe even buy a brand new brush just for this job? Not too expensive for the job, imho.
Limeybastard said:
Before using any chemicals, I would try and use the finest /thinnest plastic card or tool to scrape the glue out of the edges first. Chemicals would be my last resort. Good luck my friend.:good:
Click to expand...
Click to collapse
Yes I'm trying to find such thin tool made of plastic. Cards are too thick for it. It needs to be so thin that can cut you..like razor blades maybe even thinner.
Warlord1981 said:
Yes I'm trying to find such thin tool made of plastic. Cards are too thick for it. It needs to be so thin that can cut you..like razor blades maybe even thinner.
Click to expand...
Click to collapse
Packaging plastic is often thin and stiff... Cut it into a triangle and see if you can get "under" the glue in the gap.
roaduardo said:
I understand, some people need it. I haven't chipped or broken a display since I had an iPhone. Knock wood. Naked is glorious, though.
Click to expand...
Click to collapse
HAHAH, SNAP! Same here, last phone I ever broke was my last iphone I owned , it was the iphone 4s. That was when I was drinking also,
Nekid, is always glorious, without a shadow of a doubt. But I am too shy and need coverage.
iPhone screens can be so brittle. I got used to changing screens for friends at work. During lunch they'd bring me their replacement display kits that they ordered from Ebay and I'd replace their broken screen for some Subway (as payment).
Warlord1981 said:
Yes I'm trying to find such thin tool made of plastic. Cards are too thick for it. It needs to be so thin that can cut you..like razor blades maybe even thinner.
Click to expand...
Click to collapse
Indeed, but not metal.
What i used after installing the whitedome was a sheet of paper, running the corner around gap. Cleaned it easily this way.
princeasi said:
What i used after installing the whitedome was a sheet of paper, running the corner around gap. Cleaned it easily this way.
Click to expand...
Click to collapse
I think OP needs something as thin but stiffer as his glue is cured fully now.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
I think OP needs something as thin but stiffer as his glue is cured fully now.
Click to expand...
Click to collapse
The glue stays soft. If you run the paper around it, it will come up. After about a half a cycle thru, I would cut the edge of the paper each time so that I can continue with a firm edge. I did this after a week of installation.
princeasi said:
The glue stays soft. If you run the paper around it, it will come up. After about a half a cycle thru, I would cut the edge of the paper each time so that I can continue with a firm edge. I did this after a week of installation.
Click to expand...
Click to collapse
Guyz you won't believe it! For the past 2 hours I was doing exactly that! Actually what worked best was a piece of paper that had the dust removal stickers on it (got it from the Olixar Sentinel Case/Screen Protector kit), which is more firm than plain A4 paper. And I was cutting it all the time to keep its sharpness. At some point it finished and I used just plain A4 paper, which wasn't the same but it kinda worked as well..
I was running it inch by inch around the whole frame, taking out glue (indeed soft) little by little! I think it's much better now, though I think I will do another round in the near future.
well after watching videos.. I could see I never needed ALL of that small tube of glue. I always use some kind of screen protector. I like to sell or give away. And you can ALWAYS tell the used phones that never had a screen protector. Always some kind of scratches.. For me selling it mint.. gets more money.
So use some kind of plastic not metal blade to get the excess glue off. It comes off so easily
Warlord1981 said:
First of all which Glue Remover is more suitable? Does it have to be a branded one? Or the unbranded ones will do the job as well? Is there danger that the remover will dry and stay in the gap making it worse? Will it damage the color or consistency of the metal frame? Will it damage the buttons (Power, Volum, Bixby)?
Secondly, which tool should do the job reaching such tiny gap while at the same time not scratching the screen or the metal frame? Metal Blade? Plastic Blade? Wire? Some other tool?
Click to expand...
Click to collapse
I had the same issue with mine and all I used is the film that you remove from the Glass protector before application.. cut off small squares and I ran that in the tiny gaps but making sure you don't go too deep.. Patience and time is must..
I do have a question though.. What is the best thing to use if I wanted to remove my protector off, clean the cured adhesive and use the 2nd bottle to reapply??