My legend is on rooted 2.2 , I have set cpu and rom manager installed ...i wanted to overclock so I have download the version 3.5 from a guide posted under this section. Ive run into problem with rom manager. I've downloaded clock work recovery mod after installing the latest version of rom. When I try to instal the kernel , after out shows the pre installation menu, I check backup rom and uncheck wipe data and cache and then its supposed to boot into the recovery menu but out doesn't and shows the screen with the red exclamation mark and nothing else happens. How must I proceed here ?
Sent from my HTC Legend using Tapatalk
This will sound rude, but the solution is to not overclock. You lack experience and knowledge. Lurk around the forums for at least a few weeks, then you may be ready to try again.
Sent from my Legend using XDA Premium App
If you've decided to go further, at the triangle with exclamation mark, press (and keep pressed) vol-up then press power till a blue menu appear. Select the second option (the one containing "flash update.zip from sdcard") and you'll end at a green menu. That's CWM recovery 2.5.x...if it is an orange/yellow one it's CWM 3. You can flash a rom or kernel from there using "flash zip from sdcard" option.
Tip: Next time you can better use search, this question has been answered already several times by now in various threads...
Sent from my Legend using XDA App
This is the correct version of kernel I must flash , right ? What about the 4.0 version ?
Sent from my HTC Legend using Tapatalk
Related
Hi there,
I want to flash a new rom but for some reason I can't understand clockwork has gone. I rooted my legend a while ago with the help of a guide and ended up installing modaco's stock 2.2 legend rom. All fine, works great.
But if I want to boot into recovery mode all I get is the default recovery screen and if I select recovery mode I only get the hated red triangle of death screen
Why did this happend and what can I do to fix it?
I have the same issue, try fake flash.
It's a better option anyway
Test:
market...rom manager...install...open rom manager...and now the option:clockwork recovery install(it downloaded and install)...
now boot in recovery(with rom manager)
lwiss
On recovery (red triangle screen) press together volume up and power button. That should bring you to clockworkmod recovery
Why don't people SEARCH before asking questions? This issue has been covered like a thousand times before... and btw.. No questions in development section..
Sent from my HTC Legend using XDA App
I did search. But I couldn't find the anwser in clockwork related topics. The anwser is in fake flash topics. I'm not surprised people can't find it. Maybe it should be mentioned in a sticky?
It is. Read the sticky. "Fake flash by Koush - Launching recovery without a PC"
I loaded the latest CM7 RC to my SD card, and selected it via ROM Manager to flash, and when the phone reboots, it hangs on the HTC screen.
Any ideas? Help!
I think the issue maybe related to the Clockwork recovery that was just updated, but I cannot tell. I did Flash the ROM a month ago before the ROM Manager and Clockwork recovery updates.
Hold volume down button and press and release power to get into recovery, reflash from there or restore a backup
Sent from my HTC Hero CDMA using XDA App
Thanks, but my phone freezes on the recovery option. I have gone in the HBoot and chosen recovery and it freezes.
Have you tried turning off your phone and then holding down home and pressing power? I usually find it better that way.
joetobey said:
Thanks, but my phone freezes on the recovery option. I have gone in the HBoot and chosen recovery and it freezes.
Click to expand...
Click to collapse
Sent from my HERO200 using XDA App
radrian92 said:
Have you tried turning off your phone and then holding down home and pressing power? I usually find it better that way.
Click to expand...
Click to collapse
That asks me to clear storage...do I really want to clear storage?
joetobey said:
That asks me to clear storage...do I really want to clear storage?
Click to expand...
Click to collapse
Don't hold the power button - just press and release it.
still frozen at the htc splash screen
When I go into HBoot I see this (or as close to it as I could read)
Loading....[HERCDIAG.zip]
no Image
Loading....[HERCDIA3.nbh]
no image or wrong image
Loading....[HERCDIA2.nbh]
no image or wrong image
Loading....[HERCDIAG.nbh]
no image or wrong image
Loading....[HERCIMG.zip]
no Image
Loading....[HERCIMG.nbh]
no image or wrong image
What does this mean?
I never saw you mention a wipe, so did you ? If its your first time flashing gingerbread you need to wipe. Go to aospCMod gingerbread first post and click the "readme", its a wiki with really good instruction.
sent from a series of tubes
I will give that a read tonight. That wouldn't explain why ROM Manager is not allowing me to boot into recovery though? Would the Wipe help with that?
I will read the Wiki (in case I am asking a question that is answered there)
I Flashed the ClockworkMod again, and now I can get into recovery. I think I should be good from here. Thanks!
Just an fyi, I always flash roms from recovery directly, not rom manager. Has always worked better that way in my experience.
Sent from my HERO200 using XDA App
Hi guys, I have a friend who bought used galaxy s, the phone was rooted but it was lagging a lot and we tried to flash new Rom, but we couldn't because when we tried to go to cwm recovery it fails, and when we decided to use (volume down + home + power) buttons the menu we got didn't have "instal" from sd card option, so we decided to unroot it, we used super user to unroot, so we wanted to root it again but the phone doesn't go to "download mode"! Any HELP WE WILL REALLY BE THANKFUL!
Sent from my HTC Desire HD using xda app-developers app
Which Rom was in it previously and which Rom did you try to flash?
More information would be useful....
Take out battery for at least 1 minute put back in and try to go into Download mode with 3 button combo
Gingerbread 3.1.6, and we tried doing that but it doesn't go into download mode! It just go straight to cwm and the menu doesn't have the "install from sd card" or "update zip"
Sent from my HTC Desire HD using xda app-developers app
have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Most likely because you are still on stock recovery. Read the stickies again.
Hello!
I'm sitting here with an Nexus One with an broken powerbutton. I would like to install a new ROM, but my problem is especially, that i can't select an option, when my phone is in recovery mod.
How could i navigate aorund the problem? I know, a few options are available from an shell, for example to reboot. But i can't navigate and choose an entry out of the shell.
Do i miss some features or does exist other ways to install an new ROM?
Greets
use clockwork mod recovery , choosing is by the trackball
try 4ext touch recovery. no need of power button. search for it under DEVELOPMENT SECTION...
Sent from my Nexus One using Tapatalk
AW: [Q] Powerbutton broken, install new ROM
Afaik i'm already using the clockworkmod recovery but can't use the Trackball for selecting.
Does exists an free very of 4ext? Don't saw one in the market.
Sent from my Nexus One using xda app-developers app
check here
http://forum.xda-developers.com/showthread.php?t=1419813
[TOUCHCOVERY] 4EXT Recovery Touch v1.0.0.5 RC 5
Sent from my Nexus One using Tapatalk
Thanks!
You helped me a lot.
I was also confused, why my phone can't boot twice into recovery, till i found out, that my android device automatically reinstalled the normal recovery image.
Anyway! Thanks a lot. Some simple informations can change whole things
may be cos ur recovery didnt stick permanently.
yeah. true. glad to hv helped
Sent from my Nexus One using Tapatalk
This is an old unofficial version. Please go to THIS thread for the updated, official version.
All information below this line pertains to the old, unofficial version. Use the link above to get the official version.
Updated (v2) Slow recovery bootup fixed.
This is an unofficial version of CWM Advanced/PhilZ Touch recovery. Main thread located HERE. Go to the main thread to learn about all the features.
It uses the zImage and ramdisk provided by @ketut.kumajaya with a few tweaks to get it working made by myself.
Please take a moment to say thanks and/or donate to @ketut.kumajaya for helping us out.
It takes a few seconds longer for CWM based recoveries to boot than the stock recovery, so be patient.
Credits go to:
@Phil3759 for the advanced features
@ketut.kumajaya for the working zImage
and of course Koush and the CyanogenMod team
Link to kernel source https://github.com/kumajaya/android_kernel_samsung_lt02
~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the on-screen menu doesn't show, hit one of the up/down buttons at the bottom to get it to appear. This is the same issue seen with CWM recovery and is caused by booting into recovery with the key combo. I highly recommend using the Quick Boot app or another software method of booting recovery.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Instructions:
1. Download ODIN on your computer.
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program. Un-check Auto Reboot. See notes about ODIN below.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the recovery file you want to flash.
8. Hit "START". Wait for Odin to finish (~10-15 seconds). The message area will display "RES OK" when finished.
9. Wait for device to restart. Skip this step if you unchecked auto reboot.
10. Restart directly to recovery mode before rebooting into OS.(Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen).
11. To get the Internal SDcard to be recognized properly, choose the Advanced option; then touch the "Storage set to" option. It should change from "/data/media/0" to "data/media/". Then reboot recovery using the "Power Options".
I also recommend adjusting the Menu Height to a smaller value using the PhilZ settings option.
Notes about ODIN
--Make sure that "Re-Partition" is NOT checked.
--Auto Reboot can be un-checked if the recovery doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 10).
Instructions for recovery flashable version:
Boot into your previously installed custom recovery.
Select the Install Zip option.
Find the recovery zip.
Flash.
Reboot recovery.
Enjoy your new recovery.
Main Menu
Downloaded and installed. What i found so far is that it reacts little slow and the time in the status bar is gone in lockscreen.... After unlocking clock comes back in status bar.
Cant change GUI height correctly, all the time i touch GUI it increases the value only...
batman08 said:
Downloaded and installed. What i found so far is that it reacts little slow and the time in the status bar is gone in lockscreen.... After unlocking clock comes back in status bar.
Click to expand...
Click to collapse
I'm not sure what you mean about the time. It is not supposed to be in the status bar on the lock screen, and that has nothing to do with this recovery.
Sent from my DROID RAZR MAXX HD
gr8nole said:
I'm not sure what you mean about the time. It is not supposed to be in the status bar on the lock screen, and that has nothing to do with this recovery.
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
Ok, haven't paid much attention to that to be frank.
batman08 said:
Downloaded and installed. What i found so far is that it reacts little slow and the time in the status bar is gone in lockscreen.... After unlocking clock comes back in status bar.
Cant change GUI height correctly, all the time i touch GUI it increases the value only...
Click to expand...
Click to collapse
In regards to it reacting slowly, since you complained about that with TWRP also, I believe that is a problem with your tablet. I can't imagine it working any faster on mine. Every selection is immediate.
Keep increasing the gui height until it goes to a lower value (around 100 it switches).
Sent from my DROID RAZR MAXX HD
gr8nole said:
In regards to it reacting slowly, since you complained about that with TWRP also, I believe that if a problem with your tablet. I can't imagine it working any faster on mine. Every selection is immediate.
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
Some other users also experienced slow reaction with latest TWRP. I used TWRP 2.5.0.0 and speed and reaction was ok, on 2.6.xx reaction is slow...
Awesome job. Like how this is all coming together slowly for this tablet...
gr8nole said:
This is an unofficial version of CWM Advanced/PhilZ Touch recovery. Main thread located HERE. Go to the main thread to learn about all the features.
Since your in the recovery mood you should check out shabbyPenguins recovery OUDHS I think
Click to expand...
Click to collapse
my phone is samsung GT-I8268 Marvell PXA988 kernel
please Compile CWM Recovery for I8268
@ketut.kumajaya
Can we have cwm flashable zip please.
Regards.
Sent from my GT-N7100 using xda premium
nitol said:
Can we have cwm flashable zip please.
Regards.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Done. Flashable zip in OP.
After flashing one of the custom ROM's, I still get Android System recovery in Recovery mode. Tried 3 different ones, not working... Anyone? In Download mode it however says Custom...
/edit: turning off auto-reboot fixed it!
OP updated with v2. Slow recovery bootup fixed.
Ive tried this with auto reboot checked and unchecked.. and im still getting android recovery. I have Kies installed.. do i need to install drivers on my pc?? I waited several minutes but all i get is leave cs...
freak69ize said:
Ive tried this with auto reboot checked and unchecked.. and im still getting android recovery. I have Kies installed.. do i need to install drivers on my pc?? I waited several minutes but all i get is leave cs...
View attachment 2418355
Click to expand...
Click to collapse
Hit START
Ohhh.. DUHHH... hahaha i should have know that seeing thats how i rooted my S3. So i take it i have root also now right?? Or do i have to flash something else?
freak69ize said:
Ohhh.. DUHHH... hahaha i should have know that seeing thats how i rooted my S3. So i take it i have root also now right?? Or do i have to flash something else?
Click to expand...
Click to collapse
Flash the root.zip from the cwm or twrp thread.
Sent from my DROID RAZR MAXX HD
Hi, i have a t217A tab 3 7.0 and it has a msm8960 cpu not the msm8930 you mentioed earlier, which shows up under cpuz as a Krait 1.73 gighz
when i boot to recovery it says encrypted and the flash fails. im guessing i need a diffrent version. is there a current build for the touch screen recovery for this version already made and in place ? if so could someone link me ?
and i had a q , you mention that this should be flashed via already flashed recovery , is this mandatory or can i flash the touch version via odin straight away ? do i need to flash the regular non touch recovery then flash the touch or can i get away with directly flashing the touch recovery without first flashing the non touch?
I have rooted already , the method on this forum worked for the t217A
thanks
spydergt said:
Hi, i have a t217A tab 3 7.0 and it has a msm8960 cpu not the msm8930 you mentioed earlier, which shows up under cpuz as a Krait 1.73 gighz
when i boot to recovery it says encrypted and the flash fails. im guessing i need a diffrent version. is there a current build for the touch screen recovery for this version already made and in place ? if so could someone link me ?
and i had a q , you mention that this should be flashed via already flashed recovery , is this mandatory or can i flash the touch version via odin straight away ? do i need to flash the regular non touch recovery then flash the touch or can i get away with directly flashing the touch recovery without first flashing the non touch?
I have rooted already , the method on this forum worked for the t217A
thanks
Click to expand...
Click to collapse
No , it has msm8930 it will still show as 8960 it's a qcom thing. Also this isn't for your device.